FTS-CS800-MIB

All MIBs › FTS-CS800-MIB

Organization: FUJITSU LIMITED

Last Updated: 2012-10-01

Category: Domain: Server Hardware, Vendor: Fujitsu

Description: Fujitsu Limited MIB for the CS800 server system, providing hardware status, fault, and inventory management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FTS-CS800-MIB?

FTS-CS800-MIB is a Fujitsu (Fujitsu Technology Solutions) proprietary MIB for the CS800 server system, part of a general Fujitsu device-info MIB family intended to be supported across Fujitsu equipment. It exposes device identity objects (name, assigned name, location, vendor/product ID, product revision), an overall device state object, and detailed SCSI-style fault-reporting objects (sense key, ASC, ASCQ) along with trap description text. Its monitoring role is centered on hardware fault and inventory status: qState gives an overall health/state indicator for the CS800 system, while qSenseKey/qAsc/qAscq expose low-level SCSI sense-code style diagnostic information typically used to pinpoint storage or hardware faults, and qTrapDescription supplies human-readable context for a raised trap. It is designed as a general base MIB that all FUJITSU devices should support, implying other Fujitsu-specific MIBs build on top of its identity/state conventions. It is deployed on Fujitsu CS800 server/storage systems in data center environments where hardware fault codes need to be surfaced via SNMP, which is exactly the role the FTS-CS800-MIB MIB fills in those deployments.

IPNetwork Monitor allows you to monitor SNMP objects defined in FTS-CS800-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fujitsu CS800 server/storage system

Monitoring Examples

An admin would poll qState to get the overall health state of the CS800 system and would inspect qSenseKey, qAsc, and qAscq together when qState indicates a fault, since these three values combine (in classic SCSI sense-data style) to pinpoint the specific storage/hardware error condition. qDeviceName, qAssignedName, and qLocation let a monitoring system correctly label which physical CS800 unit an alert refers to, and qTrapDescription supplies the human-readable text accompanying a raised trap for the NOC to act on without decoding raw sense codes.

What Can Be Monitored

overall device state
SCSI-style sense key/ASC/ASCQ fault codes
device name/location identity
vendor/product ID and revision
trap description text

Imported Objects

From SNMP-COMMUNITY-MIB

snmpTrapAddress

OBJECT-TYPE

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
eternuscs	1.3.6.1.4.1.231.2.70			This file defines the private FTS SNMP MIB. This mib contains general FUJITSU device info. All FUJITSU devices should support this mib.
cs800	1.3.6.1.4.1.231.2.70.2
cs800snmp	1.3.6.1.4.1.231.2.70.2.1
qSystemInfo	1.3.6.1.4.1.231.2.70.2.1.1
STR qDeviceName	1.3.6.1.4.1.231.2.70.2.1.1.1	DisplayString	read-only	The host name of the FUJITSU device.
STR qAssignedName	1.3.6.1.4.1.231.2.70.2.1.1.2	DisplayString	read-write	The assigned name of the FUJITSU device. If none is given, the default value is the name of the device (qDeviceName).
STR qLocation	1.3.6.1.4.1.231.2.70.2.1.1.3	DisplayString	read-write	The location of the FUJITSU device. If none is provided, the value is an empty string.
STR qVendorId	1.3.6.1.4.1.231.2.70.2.1.1.4	DisplayString	read-only	The manufacturing vendor id.
STR qProductId	1.3.6.1.4.1.231.2.70.2.1.1.5	DisplayString	read-only	The product model.
STR qProductRev	1.3.6.1.4.1.231.2.70.2.1.1.6	DisplayString	read-only	The product revision.
DEV qState	1.3.6.1.4.1.231.2.70.2.1.1.7	DeviceState	read-only	The current state of the FUJITSU device.
STR qTrapDescription	1.3.6.1.4.1.231.2.70.2.1.1.8	DisplayString	accessible-for-notify	A textual description of the trap sent.
STR qSenseKey	1.3.6.1.4.1.231.2.70.2.1.1.9	DisplayString	accessible-for-notify	If available, a hexadecimal sense key value for the trap sent. If not available, the value is 0x00.
STR qAsc	1.3.6.1.4.1.231.2.70.2.1.1.10	DisplayString	accessible-for-notify	If available, a hexadecimal ASC value for the trap sent. If not available, the value is 0x00.
STR qAscq	1.3.6.1.4.1.231.2.70.2.1.1.11	DisplayString	accessible-for-notify	If available, a hexadecimal ASCQ value for the trap sent. If not available, the value is 0x00.
STR qSerialNumber	1.3.6.1.4.1.231.2.70.2.1.1.12	DisplayString	read-only	The serial number of the FUJITSU device.
qTrapDestination	1.3.6.1.4.1.231.2.70.2.1.2
IP qTrapAddress1	1.3.6.1.4.1.231.2.70.2.1.2.1	IpAddress	read-write	The IP Address of the Management Console that can receive the traps.
IP qTrapAddress2	1.3.6.1.4.1.231.2.70.2.1.2.2	IpAddress	read-write	The IP Address of the Management Console that can receive the traps.
IP qTrapAddress3	1.3.6.1.4.1.231.2.70.2.1.2.3	IpAddress	read-write	The IP Address of the Management Console that can receive the traps.
IP qTrapAddress4	1.3.6.1.4.1.231.2.70.2.1.2.4	IpAddress	read-write	The IP Address of the Management Console that can receive the traps.
IP qTrapAddress5	1.3.6.1.4.1.231.2.70.2.1.2.5	IpAddress	read-write	The IP Address of the Management Console that can receive the traps.
IP qTrapIpAddress	1.3.6.1.4.1.231.2.70.2.1.2.13	IpAddress	accessible-for-notify	The IP Address of the System that sent the traps.
qTrapEnable	1.3.6.1.4.1.231.2.70.2.1.3
TRA qInfoEnable	1.3.6.1.4.1.231.2.70.2.1.3.1	TrapToggle	read-write	The variable defines whether detected information traps are sent. This type of trap will be sent to the defined management station(s) if the value of qInfoEnable is enabled(2).
TRA qWarningEnable	1.3.6.1.4.1.231.2.70.2.1.3.2	TrapToggle	read-write	The variable defines whether detected warning traps are sent. This type of trap will be sent to the defined management station(s) if the value of qWarningEnable is enabled(2).
TRA qCriticalEnable	1.3.6.1.4.1.231.2.70.2.1.3.3	TrapToggle	read-write	The variable defines whether detected critical traps are sent. This type of trap will be sent to the defined management station(s) if the value of qCriticalEnable is enabled(2).
TRA qAvailableEnable	1.3.6.1.4.1.231.2.70.2.1.3.4	TrapToggle	read-write	The variable defines whether detected device available state change traps are sent. This type of trap will be sent to the defined management station(s) if the value of qAvailableEnable is enabled(2).
TRA qUnavailableEnable	1.3.6.1.4.1.231.2.70.2.1.3.5	TrapToggle	read-write	The variable defines whether detected device unavailable state change traps are sent. This type of trap will be sent to the defined management station(s) if the value of qUnavailableEnable is enabled(2).
TRA qNoInterventionNeededEnable	1.3.6.1.4.1.231.2.70.2.1.3.6	TrapToggle	read-write	The variable defines whether detected device no intervention needed traps are sent. This type of trap will be sent to the defined management station(s) if the value of qNoInterventionNeededEnable is enabled(2).
TRA qRequestedInterventionEnable	1.3.6.1.4.1.231.2.70.2.1.3.7	TrapToggle	read-write	The variable defines whether detected user requested intervention traps are sent. This type of trap will be sent to the defined management station(s) if the value of qRequestedInterventionEnable is enabled(2).
TRA qRequiredInterventionEnable	1.3.6.1.4.1.231.2.70.2.1.3.8	TrapToggle	read-write	The variable defines whether detected user required intervention traps are sent. This type of trap will be sent to the defined management station(s) if the value of qRequiredInterventionEnable is enabled(2).
qTraps	1.3.6.1.4.1.231.2.70.2.1.4
NTF qInfoTrap	1.3.6.1.4.1.231.2.70.2.1.4.1			A condition has been detected that provides information about the Device. The qTrapDescription variable provides more information about the trap. This trap will only be sent if the value of qInfoEnable is enabled(2).
NTF qWarningTrap	1.3.6.1.4.1.231.2.70.2.1.4.2			A condition has been detected that provides information about the Device. The qTrapDescription variable provides more information about the trap. This trap will only be sent if the value of qWarningEnable is enabled(2).
NTF qCriticalTrap	1.3.6.1.4.1.231.2.70.2.1.4.3			A condition has been detected that provides information about the Device. The qTrapDescription variable provides more information about the trap. This trap will only be sent if the value of qCriticalEnable is enabled(2).
NTF qAvailableTrap	1.3.6.1.4.1.231.2.70.2.1.4.4			The Device has changed from an unavailable to an available state. The qTrapDescription variable provides more information about the trap. This trap will only be sent if the value of qAvailableEnable is enabled(2).
NTF qUnavailableTrap	1.3.6.1.4.1.231.2.70.2.1.4.5			The Device has changed from an available to an unavailable state. The qTrapDescription variable provides more information about the trap. This trap will only be sent if the value of qUnavailableEnable is enabled(2).
NTF qNoInterventionNeededTrap	1.3.6.1.4.1.231.2.70.2.1.4.6			It has been detected that the device has returned to a condition where no user intervention is needed. The qTrapDescription variable provides more information about the trap. This trap will only be sent if the value of qNoInterventionNeededEnable is enabled(2).
NTF qRequestedInterventionTrap	1.3.6.1.4.1.231.2.70.2.1.4.7			It has been detected that the device has at least one component that is requesting user intervention. The qTrapDescription variable provides more information about the trap. This trap will only be sent if the value of qRequestedInterventionEnable is enabled(2).
NTF qRequiredInterventionTrap	1.3.6.1.4.1.231.2.70.2.1.4.8			It has been detected that the device has at least one component that requires user intervention. The qTrapDescription variable provides more information about the trap. This trap will only be sent if the value of qRequiredInterventionEnable is enabled(2).

RFC description

Vendor-specific MIB for Ericsson FTS CS800 platform management, defines managed objects for monitoring and control of this telecom switching system.

Start monitoring Fujitsu CS800 server/storage system with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FTS-CS800-MIB

What Is FTS-CS800-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description