IFCP-MGMT-MIB

All MIBs › IFCP-MGMT-MIB

Organization: IETF STORage Maintenance (STORM) Working Group

Last Updated: 2011-03-09

Category: Fibre Channel and Storage

Description: Defines managed objects for monitoring and controlling Internet Fibre Channel Protocol (iFCP) gateway instances.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring IFCP-MGMT-MIB with a free 30-day trial of IPNetwork Monitor.

What Is IFCP-MGMT-MIB?

IFCP-MGMT-MIB is an IETF standards-track MIB defining management objects for Internet Fibre Channel Protocol (iFCP) gateways, which bridge Fibre Channel SAN traffic over IP networks. It exposes gateway instance configuration and status: supported protocol version range, address translation mode, broadcast support, IP time-of-value and link-test intervals, a descriptive string, and the number of active sessions per gateway instance. It is used to monitor the operational status and configuration of an iFCP gateway -- notably the active session count, a live health/load indicator -- functioning as both configuration and runtime-status monitoring for the gateway software. Being a standards-based IETF MIB it is vendor-neutral and typically used alongside Fibre Channel and TCP/IP management MIBs in mixed FC/IP environments. It is typically deployed on iFCP gateway devices interconnecting Fibre Channel SAN islands across an IP WAN in storage networking environments. Engineers implementing or auditing this functionality typically reference the IFCP-MGMT-MIB RFC/standard documentation for the authoritative specification.

IPNetwork Monitor allows you to monitor SNMP objects defined in IFCP-MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

vendor-neutral, standards-based IETF MIB, not tied to a specific manufacturer
iFCP gateway devices bridging Fibre Channel SANs over IP

Monitoring Examples

An admin could walk ifcpLclGtwyInstTable/ifcpLclGtwyInstEntry indexed by ifcpLclGtwyInstIndex to inspect each gateway instance's ifcpLclGtwyInstVersionMin/Max for protocol compatibility and ifcpLclGtwyInstNumActiveSessions to gauge current SAN-over-IP session load. A sudden drop in ifcpLclGtwyInstNumActiveSessions on a given ifcpLclGtwyInstPhyIndex could indicate a lost IP path or FC fabric issue, while ifcpLclGtwyInstDefaultIpTOV and ifcpLclGtwyInstDefaultLTInterval help verify session timeout tuning.

What Can Be Monitored

active iFCP session count per gateway instance
supported protocol version range
address translation mode
IP time-of-value setting
link-test interval
broadcast support

Imported Objects

From ENTITY-MIB

PhysicalIndexOrZero

From FC-MGMT-MIB

FcAddressIdOrZero
FcNameIdOrZero

From HCNUM-TC

ZeroBasedCounter64

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From RMON2-MIB

ZeroBasedCounter32

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
transmission

From SNMPv2-TC

StorageType
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using ifcpLclGtwyInstNumActiveSessions OID:

Select a device implementing IFCP-MGMT-MIB as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ifcpLclGtwyInstNumActiveSessions into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The current total number of iFCP sessions in the open or open-pending state. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ifcpMgmtMIB	1.3.6.1.2.1.10.230			This module defines management information specific to Internet Fibre Channel Protocol (iFCP) gateway management. Copyright (c) 2011 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
ifcpGatewayObjects	1.3.6.1.2.1.10.230.1
ifcpLclGatewayInfo	1.3.6.1.2.1.10.230.1.1
ifcpLclGtwyInstTable	1.3.6.1.2.1.10.230.1.1.1		not-accessible	Information about all local iFCP gateway instances that can be monitored and controlled. This table contains an entry for each local iFCP gateway instance that is being managed.
ifcpLclGtwyInstEntry	1.3.6.1.2.1.10.230.1.1.1.1		not-accessible	An entry in the local iFCP gateway instance table. Parameters and settings for the gateway are found here.
U32 ifcpLclGtwyInstIndex	1.3.6.1.2.1.10.230.1.1.1.1.1	Unsigned32	not-accessible	An arbitrary integer value to uniquely identify this iFCP gateway from other local gateway instances.
PHY ifcpLclGtwyInstPhyIndex	1.3.6.1.2.1.10.230.1.1.1.1.2	PhysicalIndexOrZero	read-only	An index indicating the location of this local gateway within a larger entity, if one exists. If supported, this is the entPhysicalIndex from the Entity MIB (Version 3), for this iFCP gateway. If not supported, or if not related to a physical entity, then the value of this object is 0.
U32 ifcpLclGtwyInstVersionMin	1.3.6.1.2.1.10.230.1.1.1.1.3	Unsigned32	read-only	The minimum iFCP protocol version supported by the local iFCP gateway instance.
U32 ifcpLclGtwyInstVersionMax	1.3.6.1.2.1.10.230.1.1.1.1.4	Unsigned32	read-only	The maximum iFCP protocol version supported by the local iFCP gateway instance.
ADR ifcpLclGtwyInstAddrTransMode	1.3.6.1.2.1.10.230.1.1.1.1.5	IfcpAddressMode	read-write	The local iFCP gateway operating mode. Changing this value may cause existing sessions to be disrupted.
T/F ifcpLclGtwyInstFcBrdcstSupport	1.3.6.1.2.1.10.230.1.1.1.1.6	TruthValue	read-write	This value indicates whether the local iFCP gateway supports FC Broadcast. Changing this value may cause existing sessions to be disrupted.
IFC ifcpLclGtwyInstDefaultIpTOV	1.3.6.1.2.1.10.230.1.1.1.1.7	IfcpIpTOVorZero	read-write	The default IP_TOV used for iFCP sessions at this gateway. This is the default maximum propagation delay that will be used for an iFCP session. The value can be changed on a per-session basis. The valid range is 0 - 3600 seconds. A value of 0 implies that fibre channel frame lifetime limits will not be enforced.
IFC ifcpLclGtwyInstDefaultLTInterval	1.3.6.1.2.1.10.230.1.1.1.1.8	IfcpLTIorZero	read-write	The default Liveness Test Interval (LTI), in seconds, used for iFCP sessions at this gateway. This is the default value for an iFCP session and can be changed on a per-session basis. The valid range is 0 - 65535 seconds. A value of 0 implies no Liveness Test Interval will be performed on a session.
STR ifcpLclGtwyInstDescr	1.3.6.1.2.1.10.230.1.1.1.1.9	SnmpAdminString	read-write	A user-entered description for this iFCP gateway.
G32 ifcpLclGtwyInstNumActiveSessionsEx	1.3.6.1.2.1.10.230.1.1.1.1.10	Gauge32	read-only	The current total number of iFCP sessions in the open or open-pending state.
STO ifcpLclGtwyInstStorageType	1.3.6.1.2.1.10.230.1.1.1.1.11	StorageType	read-only	The storage type for this row. Parameter values defined for a gateway are usually non-volatile, but may be volatile or permanent in some configurations. If permanent, then the following parameters must have read-write access: ifcpLclGtwyInstAddrTransMode, ifcpLclGtwyInstDefaultIpTOV, and ifcpLclGtwyInstDefaultLTInterval.
ifcpNportSessionInfo	1.3.6.1.2.1.10.230.1.2
ifcpSessionAttributesTable	1.3.6.1.2.1.10.230.1.2.1		not-accessible	An iFCP session consists of the pair of N_PORTs comprising the session endpoints joined by a single TCP/IP connection. This table provides information on each iFCP session currently using a local iFCP gateway instance. iFCP sessions are created and removed by the iFCP gateway instances, which are reflected in this table.
ifcpSessionAttributesEntry	1.3.6.1.2.1.10.230.1.2.1.1		not-accessible	Each entry contains information about one iFCP session consisting of a pair of N_PORTs joined by a single TCP/IP connection. This table's INDEX includes ifcpLclGtwyInstIndex, which identifies the local iFCP gateway instance that created the session for the entry. Soon after an entry is created in this table for an iFCP session, it will correspond to an entry in the tcpConnectionTable of the TCP-MIB (RFC 4022). The corresponding entry might represent a preexisting TCP connection, or it might be a newly created entry. (Note that if IPv4 is being used, an entry in RFC 2012's tcpConnTable may also correspond.) The values of ifcpSessionLclPrtlAddrType and ifcpSessionRmtPrtlIfAddrType in this table and the values of tcpConnectionLocalAddressType and tcpConnectionRemAddressType used as INDEX values for the corresponding entry in the tcpConnectionTable should be the same; this makes it simpler to locate a session's TCP connection in the TCP-MIB. (Of course, all four values need to be 'ipv4' if there's a corresponding entry in the tcpConnTable.) If an entry is created in this table for a session, prior to knowing which local and/or remote port numbers will be used for the TCP connection, then ifcpSessionLclPrtlTcpPort and/or ifcpSessionRmtPrtlTcpPort have the value zero until such time as they can be updated to the port numbers (to be) used for the connection. (Thus, a port value of zero should not be used to locate a session's TCP connection in the TCP-MIB.) When the TCP connection terminates, the entry in the tcpConnectionTable and the entry in this table both get deleted (and, if applicable, so does the entry in the tcpConnTable).
I32 ifcpSessionIndex	1.3.6.1.2.1.10.230.1.2.1.1.1	Integer32	not-accessible	The iFCP session index is a unique value used as an index to the table, along with a specific local iFCP gateway instance. This index is used because the local N Port and remote N Port information would create a complex index that would be difficult to implement.
NUM ifcpSessionLclPrtlIfIndex	1.3.6.1.2.1.10.230.1.2.1.1.2	InterfaceIndexOrZero	read-only	This is the interface index in the IF-MIB ifTable being used as the local portal in this session, as described in the IF-MIB. If the local portal is not associated with an entry in the ifTable, then the value is 0. The ifType of the interface will generally be a type that supports IP, but an implementation may support iFCP using other protocols. This object can be used to obtain additional information about the interface.
IPt ifcpSessionLclPrtlAddrType	1.3.6.1.2.1.10.230.1.2.1.1.3	InetAddressType	read-only	The type of address in ifcpSessionLclIfAddr.
IP ifcpSessionLclPrtlAddr	1.3.6.1.2.1.10.230.1.2.1.1.4	InetAddress	read-only	This is the external IP address of the interface being used for the iFCP local portal in this session. The address type is defined in ifcpSessionLclPrtlAddrType. If the value is a DNS name, then the name is resolved once, during the initial session instantiation.
INE ifcpSessionLclPrtlTcpPort	1.3.6.1.2.1.10.230.1.2.1.1.5	InetPortNumber	read-only	This is the TCP port number that is being used for the iFCP local portal in this session. This is normally an ephemeral port number selected by the gateway. The value may be 0 during an initial setup period.
FCN ifcpSessionLclNpWwun	1.3.6.1.2.1.10.230.1.2.1.1.6	FcNameIdOrZero	read-only	World Wide Unique Name of the local N Port. For an unbound session, this variable will be a zero-length string.
ADR ifcpSessionLclNpFcid	1.3.6.1.2.1.10.230.1.2.1.1.7	FcAddressIdOrZero	read-only	Fibre Channel Identifier of the local N Port. For an unbound session, this variable will be a zero-length string.
FCN ifcpSessionRmtNpWwun	1.3.6.1.2.1.10.230.1.2.1.1.8	FcNameIdOrZero	read-only	World Wide Unique Name of the remote N Port. For an unbound session, this variable will be a zero-length string.
IPt ifcpSessionRmtPrtlIfAddrType	1.3.6.1.2.1.10.230.1.2.1.1.9	InetAddressType	read-only	The type of address in ifcpSessionRmtPrtlIfAddr.
IP ifcpSessionRmtPrtlIfAddr	1.3.6.1.2.1.10.230.1.2.1.1.10	InetAddress	read-only	This is the remote gateway IP address being used for the portal on the remote iFCP gateway. The address type is defined in ifcpSessionRmtPrtlIfAddrType. If the value is a DNS name, then the name is resolved once, during the initial session instantiation.
INE ifcpSessionRmtPrtlTcpPort	1.3.6.1.2.1.10.230.1.2.1.1.11	InetPortNumber	read-only	This is the TCP port number being used for the portal on the remote iFCP gateway. Generally, this will be the iFCP canonical port. The value may be 0 during an initial setup period.
ADR ifcpSessionRmtNpFcid	1.3.6.1.2.1.10.230.1.2.1.1.12	FcAddressIdOrZero	read-only	Fibre Channel Identifier of the remote N Port. For an unbound session, this variable will be a zero-length string.
ADR ifcpSessionRmtNpFcidAlias	1.3.6.1.2.1.10.230.1.2.1.1.13	FcAddressIdOrZero	read-only	Fibre Channel Identifier Alias assigned by the local gateway for the remote N Port. For an unbound session, this variable will be a zero-length string.
IFC ifcpSessionIpTOV	1.3.6.1.2.1.10.230.1.2.1.1.14	IfcpIpTOVorZero	read-write	The IP_TOV being used for this iFCP session. This is the maximum propagation delay that will be used for the iFCP session. The value can be changed on a per-session basis and initially defaults to ifcpLclGtwyInstDefaultIpTOV for the local gateway instance. The valid range is 0 - 3600 seconds. A value of 0 implies fibre channel frame lifetime limits will not be enforced.
IFC ifcpSessionLclLTIntvl	1.3.6.1.2.1.10.230.1.2.1.1.15	IfcpLTIorZero	read-only	The Liveness Test Interval (LTI) used for this iFCP session. The value can be changed on a per-session basis and initially defaults to ifcpLclGtwyInstDefaultLTInterval for the local gateway instance. The valid range is 0 - 65535 seconds. A value of 0 implies that the gateway will not originate Liveness Test messages for the session.
IFC ifcpSessionRmtLTIntvl	1.3.6.1.2.1.10.230.1.2.1.1.16	IfcpLTIorZero	read-only	The Liveness Test Interval (LTI) as requested by the remote gateway instance to use for this iFCP session. This value may change over the life of the session. The valid range is 0 - 65535 seconds. A value of 0 implies that the remote gateway has not been requested to originate Liveness Test messages for the session.
T/F ifcpSessionBound	1.3.6.1.2.1.10.230.1.2.1.1.17	TruthValue	read-only	This value indicates whether this session is bound to a specific local and remote N Port. Sessions by default are unbound and ready for future assignment to a local and remote N Port.
STO ifcpSessionStorageType	1.3.6.1.2.1.10.230.1.2.1.1.18	StorageType	read-only	The storage type for this row. Parameter values defined for a session are usually non-volatile, but may be volatile or permanent in some configurations. If permanent, then ifcpSessionIpTOV must have read-write access.
ifcpSessionStatsTable	1.3.6.1.2.1.10.230.1.2.2		not-accessible	This table provides statistics on an iFCP session.
ifcpSessionStatsEntry	1.3.6.1.2.1.10.230.1.2.2.1		not-accessible	Provides iFCP-specific statistics per session.
IFC ifcpSessionState	1.3.6.1.2.1.10.230.1.2.2.1.1	IfcpSessionStates	read-only	The current session operating state.
U32 ifcpSessionDuration	1.3.6.1.2.1.10.230.1.2.2.1.2	Unsigned32	read-only	This indicates, in seconds, how long the iFCP session has been in an open or open-pending state. When a session is down, the value is reset to 0.
NUM ifcpSessionTxOctets	1.3.6.1.2.1.10.230.1.2.2.1.3	ZeroBasedCounter64	read-only	The total number of octets transmitted by the iFCP gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
NUM ifcpSessionRxOctets	1.3.6.1.2.1.10.230.1.2.2.1.4	ZeroBasedCounter64	read-only	The total number of octets received by the iFCP gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
NUM ifcpSessionTxFrames	1.3.6.1.2.1.10.230.1.2.2.1.5	ZeroBasedCounter64	read-only	The total number of iFCP frames transmitted by the gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
NUM ifcpSessionRxFrames	1.3.6.1.2.1.10.230.1.2.2.1.6	ZeroBasedCounter64	read-only	The total number of iFCP frames received by the gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
NUM ifcpSessionStaleFrames	1.3.6.1.2.1.10.230.1.2.2.1.7	ZeroBasedCounter64	read-only	The total number of received iFCP frames that were stale and discarded by the gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
NUM ifcpSessionHeaderCRCErrors	1.3.6.1.2.1.10.230.1.2.2.1.8	ZeroBasedCounter64	read-only	The total number of Cyclic Redundancy Check (CRC) errors that occurred in the frame header, detected by the gateway for this session. Usually, a single Header CRC error is sufficient to terminate an iFCP session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
NUM ifcpSessionFcPayloadCRCErrors	1.3.6.1.2.1.10.230.1.2.2.1.9	ZeroBasedCounter64	read-only	The total number of CRC errors that occurred in the Fibre Channel frame payload, detected by the gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
NUM ifcpSessionOtherErrors	1.3.6.1.2.1.10.230.1.2.2.1.10	ZeroBasedCounter64	read-only	The total number of errors, other than errors explicitly measured, detected by the gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
TIM ifcpSessionDiscontinuityTime	1.3.6.1.2.1.10.230.1.2.2.1.11	TimeStamp	read-only	The value of sysUpTime on the most recent occasion at which any one (or more) of the ifcpSessionStatsTable counters suffered a discontinuity. The relevant counters are the specific Counter64-based instances associated with the ifcpSessionStatsTable: ifcpSessionTxOctets, ifcpSessionRxOctets, ifcpSessionTxFrames, ifcpSessionRxFrames, ifcpSessionStaleFrames, ifcpSessionHeaderCRCErrors, ifcpSessionFcPayloadCRCErrors, and ifcpSessionOtherErrors. If no such discontinuities have occurred since the last reinitialization of the local management subsystem, then this object contains a zero value.
ifcpSessionLcStatsTable	1.3.6.1.2.1.10.230.1.2.3		not-accessible	This table provides low-capacity statistics for an iFCP session. These are provided for backward compatibility with systems that do not support Counter64-based objects. At 1-Gbps rates, a Counter32-based object can wrap as often as every 34 seconds. Counter32-based objects can be sufficient for many situations. However, when possible, it is recommended to use the high-capacity statistics in ifcpSessionStatsTable based on Counter64 objects.
ifcpSessionLcStatsEntry	1.3.6.1.2.1.10.230.1.2.3.1		not-accessible	Provides iFCP-specific statistics per session.
NUM ifcpSessionLcTxOctets	1.3.6.1.2.1.10.230.1.2.3.1.1	ZeroBasedCounter32	read-only	The total number of octets transmitted by the iFCP gateway for this session.
NUM ifcpSessionLcRxOctets	1.3.6.1.2.1.10.230.1.2.3.1.2	ZeroBasedCounter32	read-only	The total number of octets received by the iFCP gateway for this session.
NUM ifcpSessionLcTxFrames	1.3.6.1.2.1.10.230.1.2.3.1.3	ZeroBasedCounter32	read-only	The total number of iFCP frames transmitted by the gateway for this session.
NUM ifcpSessionLcRxFrames	1.3.6.1.2.1.10.230.1.2.3.1.4	ZeroBasedCounter32	read-only	The total number of iFCP frames received by the gateway for this session.
NUM ifcpSessionLcStaleFrames	1.3.6.1.2.1.10.230.1.2.3.1.5	ZeroBasedCounter32	read-only	The total number of received iFCP frames that were stale and discarded by the gateway for this session.
NUM ifcpSessionLcHeaderCRCErrors	1.3.6.1.2.1.10.230.1.2.3.1.6	ZeroBasedCounter32	read-only	The total number of CRC errors that occurred in the frame header, detected by the gateway for this session. Usually, a single Header CRC error is sufficient to terminate an iFCP session.
NUM ifcpSessionLcFcPayloadCRCErrors	1.3.6.1.2.1.10.230.1.2.3.1.7	ZeroBasedCounter32	read-only	The total number of CRC errors that occurred in the Fibre Channel frame payload, detected by the gateway for this session.
NUM ifcpSessionLcOtherErrors	1.3.6.1.2.1.10.230.1.2.3.1.8	ZeroBasedCounter32	read-only	The total number of errors, other than errors explicitly measured, detected by the gateway for this session.
ifcpGatewayConformance	1.3.6.1.2.1.10.230.2
ifcpCompliances	1.3.6.1.2.1.10.230.2.1
ifcpGatewayCompliance	1.3.6.1.2.1.10.230.2.1.1			This MODULE-COMPLIANCE has been deprecated because address translation mode has been deprecated in the iFCP standard. It has the implementation requirements for iFCP MIB module compliance.
ifcpGatewayComplianceNoTranslation	1.3.6.1.2.1.10.230.2.1.2			Implementation requirements for iFCP MIB module compliance. Address translation mode has been deprecated in the iFCP standard.
ifcpGroups	1.3.6.1.2.1.10.230.2.2
ifcpLclGatewayGroup	1.3.6.1.2.1.10.230.2.2.1			iFCP local device info group. This group provides information about each gateway.
ifcpLclGatewaySessionGroup	1.3.6.1.2.1.10.230.2.2.4			This OBJECT-GROUP has been deprecated because address translation mode has been deprecated in the iFCP standard. iFCP Session group. This group provides information about each iFCP session currently active between iFCP gateways.
ifcpLclGatewaySessionStatsGroup	1.3.6.1.2.1.10.230.2.2.5			iFCP Session Statistics group. This group provides statistics with 64-bit counters for each iFCP session currently active between iFCP gateways. This group is only required for agents that can support Counter64- based data types.
ifcpLclGatewaySessionLcStatsGroup	1.3.6.1.2.1.10.230.2.2.6			iFCP Session Low-Capacity Statistics group. This group provides statistics with low-capacity 32-bit counters for each iFCP session currently active between iFCP gateways. This group is only required for agents that do not support Counter64-based data types, or that need to support SNMPv1 applications.
ifcpLclGatewaySessionGroupNoTranslation	1.3.6.1.2.1.10.230.2.2.7			iFCP Session group. This group provides information about each iFCP session currently active between iFCP gateways.

RFC description

Internet Fibre Channel Protocol (iFCP) gateway management information for storage networking over IP.

Start monitoring Vendor-neutral IETF standard (iFCP gateway bridging Fibre Channel SANs over IP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IFCP-MGMT-MIB