| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ieee8021PbMib | 1.3.111.2.802.1.1.5 | | | Provider Bridge MIB module.
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q.
Copyright (C) IEEE (2018).
This version of this MIB module is part of IEEE Std 802.1Q;
see the draft itself for full legal notices. |
| ieee8021PbNotifications | 1.3.111.2.802.1.1.5.0 | | | |
| ieee8021PbObjects | 1.3.111.2.802.1.1.5.1 | | | |
| ieee8021PbVidTranslationTable | 1.3.111.2.802.1.1.5.1.1 | | not-accessible | This table is used to configure the VID Translation Table
defined in 12.10.1.8. The VID
Translation Table is used to implement a bidirectional
mapping between a local S-VID, used in data and protocol
frames transmitted and received through a CNP or PNP,
and a relay S-VID, used by the filtering and forwarding
process. Each row in this table is indexed by component,
port, and local S-VID value and indicates the relay S-VID
value to be used for the specified S-VID. If no entry for
a component, port, and local-svid is present in this table
is present then the relay S-VID used for a frame received
on that port with the local S-VID value will be the S-VID
that has the same numeric value as the local S-VID of the
received frame.
Entries in this table must be persistent over power up
restart/reboot. |
| ieee8021PbVidTranslationEntry | 1.3.111.2.802.1.1.5.1.1.1 | | not-accessible | An entry for the S-VID translation table which includes
both the Local and Relay S-VIDs between which the PNP or CNP
translates.
Note that the component ID of entries in this table must refer
to the S-VLAN Component of a Provider Bridge. |
| VLA ieee8021PbVidTranslationLocalVid | 1.3.111.2.802.1.1.5.1.1.1.1 | VlanId | not-accessible | The S-VID on received(transmitted) at the ISS of a CNP or PNP. |
| VLA ieee8021PbVidTranslationRelayVid | 1.3.111.2.802.1.1.5.1.1.1.2 | VlanId | read-create | The translated S-VID delivered(received) over the EISS from a
CNP or PNP. The default value of this object on creation will
be the value of the corresponding instance of
ieee8021PbVidTranslationLocalVid. |
| ROW ieee8021PbVidTranslationRowStatus | 1.3.111.2.802.1.1.5.1.1.1.3 | RowStatus | read-create | This indicates the status of an entry in this table, and is
used to create/delete entries.
It is an implementation specific decision as to whether any
column in this table may be set while the corresponding
instance of this object is valid(1). |
| ieee8021PbCVidRegistrationTable | 1.3.111.2.802.1.1.5.1.2 | | not-accessible | A table used in a CEP to create the mapping between a C-VID
and a service represented by an S-VID.
Note that the component ID of entries in this table must refer
to the S-VLAN component of a Provider Edge Bridge and the Port
Number must refer to the port number of the Customer Edge Port
associated with that Provider Edge Bridge.
Entries in this table must be persistent over power up
restart/reboot. |
| ieee8021PbCVidRegistrationEntry | 1.3.111.2.802.1.1.5.1.2.1 | | not-accessible | An element of the C-VID registration table accessed by PB
C-VLAN component, Customer Edge Port Bridge Port number, and
C-VID. Each element contains the mapping between a C-VID and
the S-VID which carries the service and booleans for handling
untagged frames at the PEP and CEP. |
| VLA ieee8021PbCVidRegistrationCVid | 1.3.111.2.802.1.1.5.1.2.1.1 | VlanId | not-accessible | C-VID of this C-VID registration entry. |
| VLA ieee8021PbCVidRegistrationSVid | 1.3.111.2.802.1.1.5.1.2.1.2 | VlanId | read-create | S-VID for this C-VID registration entry. |
| T/F ieee8021PbCVidRegistrationUntaggedPep | 1.3.111.2.802.1.1.5.1.2.1.3 | TruthValue | read-create | A flag indicating if this C-VID should be carried untagged
at the PEP. A value of true(1) means untagged. |
| T/F ieee8021PbCVidRegistrationUntaggedCep | 1.3.111.2.802.1.1.5.1.2.1.4 | TruthValue | read-create | A flag indicating if this C-VID should be carried untagged
at the CEP. A value of true(1) means untagged. |
| ROW ieee8021PbCVidRegistrationRowStatus | 1.3.111.2.802.1.1.5.1.2.1.5 | RowStatus | read-create | This indicates the status of an entry in this table, and is
used to create/delete entries.
The value of ieee8021PbCVidRegistrationSVid must be set before
an entry in this table can be made valid.
It is an implementation specific decision as to whether any
column in this table may be set while the corresponding
instance of this object is valid(1). |
| ieee8021PbEdgePortTable | 1.3.111.2.802.1.1.5.1.3 | | not-accessible | A Provider Edge Port (PEP) table which indicate the subset of
parameters needed for each PEP. |
| ieee8021PbEdgePortEntry | 1.3.111.2.802.1.1.5.1.3.1 | | not-accessible | An entry in the PEP table indexed by ComponentID and S-VID and
containing parameters used to configure ingress filtering on
the PEP, thus affecting traffic transiting from the provider
network to the customer edge port. The columns allow the
default C-VID value and default priority to be specified
and PEP's ingress filtering operation to be controlled.
Note that the component ID of entries in this table must refer
to an S-VLAN component of a provider edge Bridge and the Bridge
Port number must refer to the port number of a Customer Edge
Port associated with that Provider Edge Bridge. |
| VLA ieee8021PbEdgePortSVid | 1.3.111.2.802.1.1.5.1.3.1.1 | VlanId | not-accessible | The 12 bit S-VID associated with the PEP. |
| VLA ieee8021PbEdgePortPVID | 1.3.111.2.802.1.1.5.1.3.1.2 | VlanId | read-write | A 12-bit C-VID to be used for untagged frames received at
the Provider Edge Port. |
| IEE ieee8021PbEdgePortDefaultUserPriority | 1.3.111.2.802.1.1.5.1.3.1.3 | IEEE8021PriorityValue | read-write | An integer range 0-7 to be used for untagged frames received
at the Provider Edge Port. |
| IEE ieee8021PbEdgePortAcceptableFrameTypes | 1.3.111.2.802.1.1.5.1.3.1.4 | IEEE8021PortAcceptableFrameTypes | read-write | the Acceptable Frame Types for frames received at the PEP.
The permissible values for the parameter are:
1) Admit all frames;
2) Admit only untagged and Priority-tagged frames;
3) Admit only VLAN-tagged frames. |
| T/F ieee8021PbEdgePortEnableIngressFiltering | 1.3.111.2.802.1.1.5.1.3.1.5 | TruthValue | read-write | Filtering parameter for frames received at the PEP.
The permissible values for the parameter are:
true(1) Enabled;
false(2) Disabled. |
| ieee8021PbServicePriorityRegenerationTable | 1.3.111.2.802.1.1.5.1.4 | | not-accessible | The priority regeneration table for this PEP. |
| ieee8021PbServicePriorityRegenerationEntry | 1.3.111.2.802.1.1.5.1.4.1 | | not-accessible | An element of the PEP priority regeneration table indexed
by Component ID, Bridge Port number, S-VID, and received
priority. Each element contains the regenerated priority.
Note that the component ID of entries in this table must refer
to the S-VLAN component of a Provider Edge Bridge and the Port
Number must refer to the port number of the Customer Edge Port
associated with that S-VLAN component. |
| VLA ieee8021PbServicePriorityRegenerationSVid | 1.3.111.2.802.1.1.5.1.4.1.1 | VlanId | not-accessible | S-VID for this regeneration table entry. |
| IEE ieee8021PbServicePriorityRegenerationReceivedPriority | 1.3.111.2.802.1.1.5.1.4.1.2 | IEEE8021PriorityValue | not-accessible | Received priority for this regeneration table entry. |
| IEE ieee8021PbServicePriorityRegenerationRegeneratedPriority | 1.3.111.2.802.1.1.5.1.4.1.3 | IEEE8021PriorityValue | read-write | The regenerated priority contained in this regeneration table
entry. |
| ieee8021PbCnpTable | 1.3.111.2.802.1.1.5.1.5 | | not-accessible | This table is used for dynamic creation and deletion of
Customer Network Ports on S-VLAN components or I-components.
Creation of an entry in this table will implicitly also
create a corresponding entry in the ieee8021BridgeBasePortTable.
Entries in this table must be persistent across reinitializations
of the management system. |
| ieee8021PbCnpEntry | 1.3.111.2.802.1.1.5.1.5.1 | | not-accessible | Represents a dynamically created Customer Network Port. |
| OID ieee8021PbCnpCComponentId | 1.3.111.2.802.1.1.5.1.5.1.1 | IEEE8021PbbComponentIdentifierOrZero | read-create | The component ID of the C-Vlan component if this is an
internal customer network port. The value must be 0 for
an external customer network port.
This value must be consistent with the value of the
corresponding instance of ieee8021PbCnpSVid.
Both must be non-zero, or both must be zero. |
| VLA ieee8021PbCnpSVid | 1.3.111.2.802.1.1.5.1.5.1.2 | VlanIdOrNone | read-create | The S-VID for service for an internal customer network port.
For an external port, this value must be 0.
This value must be consistent with the value of the
corresponding instance of ieee8021PbCnpCComponentId.
Both must be non-zero, or both must be zero. |
| ROW ieee8021PbCnpRowStatus | 1.3.111.2.802.1.1.5.1.5.1.3 | RowStatus | read-create | This object is used for creation/deletion of entries in
this table.
All columns in this table must have valid values before
this object can be set to active(1).
While the value of this object is active(1), the values
of other columns in the same entry may not be modified. |
| ieee8021PbPnpTable | 1.3.111.2.802.1.1.5.1.6 | | not-accessible | This table is used for dynamic creation and deletion of
Provider Network Ports on S-VLAN components or B-components.
Creation of an entry in this table will implicitly also
create a corresponding entry in the ieee8021BridgeBasePortTable.
Entries in this table must be persistent across reinitializations
of the management system. |
| ieee8021PbPnpEntry | 1.3.111.2.802.1.1.5.1.6.1 | | not-accessible | Represents a dynamically created Provider Network Port. |
| ROW ieee8021PbPnpRowStatus | 1.3.111.2.802.1.1.5.1.6.1.1 | RowStatus | read-create | This object is used for creation/deletion of entries in
this table. |
| ieee8021PbCepTable | 1.3.111.2.802.1.1.5.1.7 | | not-accessible | This table is used to create Customer Edge Ports, CEPs, on a
provider edge Bridge. It is indexed by the ComponentId of the
PEB's S-VLAN component and by the port number for the CEP. Note that
the CEP's port number belongs to the set of port numbers
associated with the PEB's S-VLAN component.
Entries in this table must be persistent across reinitializations
of the management system. However, note that some column values,
as noted below, may change across system reinitializations. |
| ieee8021PbCepEntry | 1.3.111.2.802.1.1.5.1.7.1 | | not-accessible | The entry of the ieee8021PbCepTable. Note that the component
index must refer to the S-VLAN component of a PEB, and that the port
number for the CEP is allocated from the port number space of
that S-VLAN component. |
| OID ieee8021PbCepCComponentId | 1.3.111.2.802.1.1.5.1.7.1.1 | IEEE8021PbbComponentIdentifierOrZero | read-only | This column is an implementation specific column that may be
used to map the C component associated with this CEP to other
tables within the system, such as the Entity MIB. This
column may not be created or modified by management station
action. A value of 0 is always legal, and non-zero values
will be interpreted in an implementation specific manner.
The value of this column may or may not persist across system
restarts. |
| IEE ieee8021PbCepCepPortNumber | 1.3.111.2.802.1.1.5.1.7.1.2 | IEEE8021BridgePortNumberOrZero | read-only | This column is an implementation specific column that may be
used to map the CEP to other tables within the system, for
example the Entity MIB. This column may not be created or
modified by management station action. A value of 0 is
always legal, and non-zero values will be interpreted in an
implementation specific manner. The value of this column
may or may not persist across system restarts. |
| ROW ieee8021PbCepRowStatus | 1.3.111.2.802.1.1.5.1.7.1.3 | RowStatus | read-create | This indicates the status of the entry, and is used to create
and delete entries in this table. |
| ieee8021PbRcapTable | 1.3.111.2.802.1.1.5.1.8 | | not-accessible | This table is used to create Remote Customer Access Ports, on a
provider edge Bridge. It is indexed by the ComponentId of the
PEB's S-VLAN component and by the port number for the RCAP. Note that
the index port number belongs to the set of port numbers
associated with the PEB's primary S-VLAN component.
Entries in this table must be persistent across reinitializations
of the management agent. However, note that some column values,
as noted below, may change across system reinitializations. |
| ieee8021PbRcapEntry | 1.3.111.2.802.1.1.5.1.8.1 | | not-accessible | The entry of the ieee8021PbRcapTable. Note that the component
index must refer to the primary S-VLAN component of a PEB, and that
the port number index for the RCAP is allocated from the port
number space of that S-VLAN component. |
| OID ieee8021PbRcapSComponentId | 1.3.111.2.802.1.1.5.1.8.1.1 | IEEE8021PbbComponentIdentifierOrZero | read-only | This column is an implmentation specific column that may be
used to map the Port-mapping S-VLAN component associated with
this RCAP to other tables within the system, such as the
Entity MIB. This column may not be created or modified
by management station action. A value of 0 is always legal,
and non-zero values will be interpreted in an implementation
specific manner. The value of this column may or may not
persist across system restarts. |
| IEE ieee8021PbRcapRcapPortNumber | 1.3.111.2.802.1.1.5.1.8.1.2 | IEEE8021BridgePortNumberOrZero | read-only | This column is an implementation specific column that may be
used to map the RCAP to other tables within the system, for
example the Entity MIB. This column may not be created or
modified by management station action. A value of 0 is
always legal, and non-zero values will be interpreted in an
implementation specific manner. The value of this column
may or may not persist across system restarts. |
| ROW ieee8021PbRcapRowStatus | 1.3.111.2.802.1.1.5.1.8.1.3 | RowStatus | read-create | This indicates the status of the entry, and is used to create
and delete entries in this table. |
| ieee8021PbInternalInterfaceTable | 1.3.111.2.802.1.1.5.1.9 | | not-accessible | A table used in a Port-mapping S-VLAN component associated with
a Remote Customer Access Port to manage the mapping between
external S-VIDs and internal interfaces/S-VIDs.
Note that the component ID of entries in this table must refer
to the primary S-VLAN component of a Provider Edge Bridge and
the Port Number must refer to the port number of a Remote
Customer Access Port associated with that S-VLAN component.
Entries in this table must be persistent over power up
restart/reboot. |
| ieee8021PbIiEntry | 1.3.111.2.802.1.1.5.1.9.1 | | not-accessible | An element of the internal interface table accessed by PB
S-VLAN component ID, Remnote Customer Access Port Bridge Port
number, and external S-VID. Each element contains the mapping
between an external S-VID and the internal port it selects and,
except in the case of a C-tagged service interface the
internal S-VID which carries the service . |
| VLA ieee8021PbIiExternalSVid | 1.3.111.2.802.1.1.5.1.9.1.1 | VlanId | not-accessible | External S-VID for this internal interface table entry. |
| IEE ieee8021PbIiInternalPortNumber | 1.3.111.2.802.1.1.5.1.9.1.2 | IEEE8021BridgePortNumberOrZero | read-only | The port number for the internal port on the primary
S-VLAN component. This port number is used in FDB entries
that reference an RCSI.
The port number of the Remote Customer Access Port can
be used to identify a PNP on the primary S-VLAN component
connected to a PNP on the Port-mapping S-VLAN component. |
| IEE ieee8021PbIiInternalPortType | 1.3.111.2.802.1.1.5.1.9.1.3 | IEEE8021BridgePortType | read-create | The port type of the internal port on the primary
S-VLAN component. This indicates the type of RCSI as follows:
providerNetworkPort(3) - Indicates a PNP (not an RCSI)
customerNetworkPort(4) - Indicates a Port-based RCSI
customerEdgePort(5) - Indicates a C-tagged RCSI
Other port type values are not valid for this field. |
| VLA ieee8021PbIiInternalSVid | 1.3.111.2.802.1.1.5.1.9.1.4 | VlanIdOrNone | read-create | Internal S-VID for this external S-VID entry. |
| ROW ieee8021PbIiRowStatus | 1.3.111.2.802.1.1.5.1.9.1.5 | RowStatus | read-create | This indicates the status of an entry in this table, and is
used to create/delete entries.
The value of ieee8021PbIiExternalSVid must be set before
an entry in this table can be made valid.deprecated
It is an implementation specific decision as to whether any
column in this table may be set while the corresponding
instance of this object is valid(1). |
| ieee8021PbConformance | 1.3.111.2.802.1.1.5.2 | | | |
| ieee8021PbGroups | 1.3.111.2.802.1.1.5.2.1 | | | |
| ieee8021PbVidTranslationGroup | 1.3.111.2.802.1.1.5.2.1.1 | | | The collection of objects used to represent a PB
C-VID/S-VID translation. |
| ieee8021PbCVidRegistrationGroup | 1.3.111.2.802.1.1.5.2.1.2 | | | The collection of objects used to represent a CEP translation. |
| ieee8021PbEdgePortGroup | 1.3.111.2.802.1.1.5.2.1.3 | | | The collection of objects user to represent a PEP. |
| ieee8021PbServicePriorityRegenerationGroup | 1.3.111.2.802.1.1.5.2.1.4 | | | A regenerated priority value for a PEP. |
| ieee8021PbDynamicCnpGroup | 1.3.111.2.802.1.1.5.2.1.5 | | | A set of objects used for dynamic creation and deletion
of customer network ports. |
| ieee8021PbDynamicPnpGroup | 1.3.111.2.802.1.1.5.2.1.6 | | | A set of objects used for dynamic creation and deletion
of provider network ports. |
| ieee8021PbDynamicCepGroup | 1.3.111.2.802.1.1.5.2.1.7 | | | A set of objects used for dynamic creation and deletion
of customer edge ports. |
| ieee8021PbDynamicRcapGroup | 1.3.111.2.802.1.1.5.2.1.8 | | | A set of objects used for dynamic creation and deletion
of remote customer access ports. |
| ieee8021PbInternalInterfaceGroup | 1.3.111.2.802.1.1.5.2.1.9 | | | A set of objects used for dynamic creation and deletion
of internal interfaces on a Port-mapping S-VLAN component. |
| ieee8021PbDynamicRcapV2Group | 1.3.111.2.802.1.1.5.2.1.10 | | | A set of objects used for dynamic creation and deletion
of remote customer access ports. |
| ieee8021PbCompliances | 1.3.111.2.802.1.1.5.2.2 | | | |
| ieee8021PbCompliance | 1.3.111.2.802.1.1.5.2.2.1 | | | The compliance statement for device support of Provider
Bridge services. |
| ieee8021PbComplianceV2 | 1.3.111.2.802.1.1.5.2.2.2 | | | The compliance statement for device support of Provider
Bridge services. |
