All MIBs › IBM6611-MIB
Category: Domain: WAN/TDM, Vendor: IBM
Description: IBM MIB for the IBM 6611 Nways Multiprotocol Router providing comprehensive routing and WAN interface management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is IBM6611-MIB?
IBM6611-MIB is IBM's vendor-specific SNMP module for the IBM 6611 Nways Multiprotocol Router, a WAN/LAN routing platform from IBM's Nways networking product family. It exposes routing and WAN interface management data alongside processor load statistics and software version/PTF (program temporary fix) inventory information. It is explicitly useful for monitoring hardware and software status: ibmMainProcessorLoadTable reports per-processor CPU load for spotting overload conditions, while swVpdTable (software vital product data) tracks installed software name, PTF name, version ID, release ID, and module ID for verifying patch levels across a fleet. No explicit dependency on other IETF MIBs is indicated in the available objects, consistent with this being an early, largely self-contained IBM enterprise MIB. It would typically be deployed in enterprise WAN environments where 6611 routers handle multiprotocol routing and operators need CPU load and software currency visibility via SNMP. Engineers can download the IBM6611-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in IBM6611-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- IBM 6611 Nways Multiprotocol Router
Monitoring Examples
Polling ibmMainProcessorLoadTable (via ibmMainProcessorLoadIndex/ibmMainProcessorLoad) lets an admin detect a router CPU pegged near capacity, an early warning of a routing or protocol-conversion overload. Cross-referencing swVpdTable entries (swvpdName, swvpdPtfName, swvpdVerId, swvpdRelId, swvpdModId) confirms whether a given 6611 is running the expected software release and PTF level, useful when auditing for a known outdated release. Together these tables give a combined hardware-load and software-version health check for the router.
What Can Be Monitored
- main processor load
- installed software name/version
- PTF (patch) level
- software release ID
- software module ID
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| TimeTicks | |
| enterprises |
From RFC1158-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| cylink | 1.3.6.1.4.1.2.6.2.3.1 | |||
| INT cylinkAlarmRepeatTime | 1.3.6.1.4.1.2.6.2.3.1.3.1.20 | INTEGER | read-only | The interval, in minutes, that the CSU will insert duplicate messages in the alarm queue for persistant alarm conditions. |
| INT cylinkClockBackup | 1.3.6.1.4.1.2.6.2.3.1.3.1.13 | INTEGER | read-only | The transmit clock backup source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock). |
| INT cylinkClockFrequency | 1.3.6.1.4.1.2.6.2.3.1.3.1.12 | INTEGER | read-only | The external clock frequency selected (56 kHz, 256 kHz, 1.344 MHz, 1.544 MHz). |
| INT cylinkClockSource | 1.3.6.1.4.1.2.6.2.3.1.3.1.11 | INTEGER | read-only | The transmit clock source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock). |
| cylinkConfigEntry | 1.3.6.1.4.1.2.6.2.3.1.3.1 | not-accessible | An entry in the cylink Configuration table. | |
| INT cylinkConfigIndex | 1.3.6.1.4.1.2.6.2.3.1.3.1.1 | INTEGER | read-only | The index value which uniquely identifies the CSU to which this entry is applicable. The CSU identified by a particular value of this index is the same CSU as identified by the same value in a cylinkIndex object instance. |
| cylinkConfigTable | 1.3.6.1.4.1.2.6.2.3.1.3 | not-accessible | The cylink Configuration table. This table contains information about the configuration of the Cylink CSUs attached to the system. | |
| INT cylinkDialoutCapability | 1.3.6.1.4.1.2.6.2.3.1.3.1.16 | INTEGER | read-only | The DIU dial-out capability selected (polled, tone, or pulse). |
| INT cylinkDialoutHoldoff | 1.3.6.1.4.1.2.6.2.3.1.3.1.17 | INTEGER | read-only | The mininum time, in minutes, between successful CSU-to-NMS connections to report alarm conditions. |
| INT cylinkDIUFrequency | 1.3.6.1.4.1.2.6.2.3.1.3.1.14 | INTEGER | read-only | The DIU frequency selected for NRZ DIUs (767 kbps, 1.244 Mbps, 1.528 Mbps, 1.536 Mbps). |
| INT cylinkDIUTiming | 1.3.6.1.4.1.2.6.2.3.1.3.1.15 | INTEGER | read-only | The DIU transmit timing selected for NRZ DIUs (Send Timing, or Terminal Timing). |
| INT cylinkDTEDS1Mode | 1.3.6.1.4.1.2.6.2.3.1.3.1.6 | INTEGER | read-only | The DTE DS-1 mode selected (B8ZS, or AMI). |
| INT cylinkDTEFraming | 1.3.6.1.4.1.2.6.2.3.1.3.1.4 | INTEGER | read-only | The DTE framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and the network interface is ESF framed. |
| INT cylinkESThreshold | 1.3.6.1.4.1.2.6.2.3.1.3.1.21 | INTEGER | read-only | The threshold, in seconds, for the errored second value in the current 15-minute interval. |
| INT cylinkIndex | 1.3.6.1.4.1.2.6.2.3.1.1.1.1 | INTEGER | read-only | An index value that uniquely identifies a cylink system interface. The interface identified by a particular value of this index is the same interface as identified by the same value in an ifIndex object instance. |
| INT cylinkLinkState | 1.3.6.1.4.1.2.6.2.3.1.1.1.2 | INTEGER | read-only | The current state of the link. The meanings of the values are: cylinkNotConnected(1) The link is not physically connected to the CSU. This may be due to loss of input circuit or loss of output circuit. cylinkNoInput(2) The input circuit is not connected. cylinkNoOutput(3) The output circuit is not connected. cylinkConnected(4) The link is connected to the CSU. |
| INT cylinkLoopback | 1.3.6.1.4.1.2.6.2.3.1.1.1.3 | INTEGER | read-only | The loopback mode of the link. The meaning of values are: cylinkNoLoopback(1) The link is not in loopback mode. cylinkNearEndLoopback(2) The link has been placed in loopback mode at the near end: data is being looped back within the local CSU. cylinkFarEndLoopback(3) The link has been placed in loopback mode at the far end: data is being looped across the link to the remote CSU and back. |
| INT cylinkNetworkDS1Mode | 1.3.6.1.4.1.2.6.2.3.1.3.1.7 | INTEGER | read-only | The network DS-1 mode selected (B8ZS, or AMI). |
| INT cylinkNetworkFraming | 1.3.6.1.4.1.2.6.2.3.1.3.1.5 | INTEGER | read-only | The network framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and the network interface is ESF framed. |
| INT cylinkOnesControl | 1.3.6.1.4.1.2.6.2.3.1.3.1.9 | INTEGER | read-only | The Ones Density Control selected (LSB 24, D4 FRM, or ESF DL). |
| INT cylinkOnesResponsibility | 1.3.6.1.4.1.2.6.2.3.1.3.1.8 | INTEGER | read-only | The component selected for Ones Density Responsibility (DTE, or CSU. |
| STR cylinkPrimaryPhone | 1.3.6.1.4.1.2.6.2.3.1.3.1.18 | DisplayString | read-only | The primary telephone number used by by the CSU to contact the NMS. |
| INT cylinkQRSS | 1.3.6.1.4.1.2.6.2.3.1.1.1.4 | INTEGER | read-only | The Quasi-Random Signal Sequence test mode of the CSU. The value of the meanings are: cylinkNoQRSS(1) The CSU is not in QRSS mode. cylinkQRSSMaster(2) The CSU is transmitting a QRSS test pattern. cylinkQRSSSlave(3) The CSU is receiving a QRSS test pattern. |
| INT cylinkSecondaryContact | 1.3.6.1.4.1.2.6.2.3.1.3.1.22 | INTEGER | read-only | The state of the CSU secondary contact (open or closed). |
| STR cylinkSecondaryPhone | 1.3.6.1.4.1.2.6.2.3.1.3.1.19 | DisplayString | read-only | The secondary telephone number used by by the CSU to contact the NMS. |
| INT cylinkSerialNumber | 1.3.6.1.4.1.2.6.2.3.1.3.1.2 | INTEGER | read-only | The manufacturer's serial number of this CSU. |
| STR cylinkSoftwareVersion | 1.3.6.1.4.1.2.6.2.3.1.3.1.3 | DisplayString | read-only | The version number of the microcode running in the CSU. |
| cylinkStatusEntry | 1.3.6.1.4.1.2.6.2.3.1.1.1 | not-accessible | An entry in the cylink Status table. | |
| cylinkStatusTable | 1.3.6.1.4.1.2.6.2.3.1.1 | not-accessible | The cylink Status table. This table contains information about the current state of the Cylink CSUs attached to the system. | |
| INT cylinkZeroProtection | 1.3.6.1.4.1.2.6.2.3.1.3.1.10 | INTEGER | read-only | The Consecutive Zero Control selected (15, or 80). This determines the the maximum number of consecutive zeros allowed in the data stream before a one is forced. |
| ibm | 1.3.6.1.4.1.2 | |||
| ibm6611 | 1.3.6.1.4.1.2.6.2 | |||
| ibmappcInformation | 1.3.6.1.4.1.2.6.2.13.7.2.1 | |||
| ibmappcInGlobal | 1.3.6.1.4.1.2.6.2.13.7.2.1.1 | |||
| GAU ibmappcInGlobeActSess | 1.3.6.1.4.1.2.6.2.13.7.2.1.1.6 | Gauge | read-only | Number of currently active APPC sessions |
| INT ibmappcInGlobeCtrStatus | 1.3.6.1.4.1.2.6.2.13.7.2.1.1.4 | INTEGER | read-write | Indicates whether or not the appc session counters are active. This object reflects the combination of the ibmappcInGlobeStatus object and any other product dependant object(s). The values are: 1. notActive: collection of counters and some names is not active. 2. active: collection of counters and some names is active. |
| TIK ibmappcInGlobeCtrStatusTime | 1.3.6.1.4.1.2.6.2.13.7.2.1.1.5 | TimeTicks | read-only | Time when the ibmappcInGlobeCtrStatus object last changed. This time is in hundreds of a second. |
| INT ibmappcInGlobeRscv | 1.3.6.1.4.1.2.6.2.13.7.2.1.1.2 | INTEGER | read-write | Indicates the current collection options in effect: 1. notActive: collection of route selection control vectors is not active. 2. active: collection of route selection control vectors is active. |
| TIK ibmappcInGlobeRscvTime | 1.3.6.1.4.1.2.6.2.13.7.2.1.1.3 | TimeTicks | read-only | Time when the ibmappcInGlobeRscv object last changed. This time is in hundreds of a second. |
| INT ibmappcInGlobeStatus | 1.3.6.1.4.1.2.6.2.13.7.2.1.1.1 | INTEGER | read-write | Indicates the current collection options in effect: 1. notActive: collection of counters and some names is not active. 2. active: collection of counters and some names is active. |
| INT ibmappcInLluBindRspMayQ | 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.4 | INTEGER | read-only | Indicates whether or not a received bind response will be queued if the LU is not currently active. |
| INT ibmappcInLluCntlPtLu | 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.6 | INTEGER | read-only | Indicates whether or not the LU is the control point (CP) LU. |
| GAU ibmappcInLluCurActSess | 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.7 | Gauge | read-only | The number of currently active sessions. |
| INT ibmappcInLluDefaultLu | 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.5 | INTEGER | read-only | Indicates whether the LU is the default LU for the node. |
| INT ibmappcInLluDefType | 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.2 | INTEGER | read-only | Indicates whether the LU definition was specified in the nodes system definitions or was dynamically created. |
| ibmappcInLluEntry | 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1 | not-accessible | Entry of APPC Local Lu Information Table. | |
| STR ibmappcInLluLuName | 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.1 | DisplayString | read-only | The network-qualified LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| INT ibmappcInLluSessLimit | 1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.3 | INTEGER | read-only | The maximum number of session supported by this LU. |
| ibmappcInLluTable | 1.3.6.1.4.1.2.6.2.13.7.2.1.2 | not-accessible | APPC Local Lu Table | |
| INT ibmappcInLtpDefType | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.3 | INTEGER | read-only | The TP definition type. Indicates whether the TP was specified in the nodes system definitions or was dynamically created. |
| ibmappcInLtpEntry | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1 | not-accessible | Entry of APPC Local TP Information Table. | |
| INT ibmappcInLtpInstLmt | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.5 | INTEGER | read-only | The TP instance limit. |
| GAU ibmappcInLtpInstNum | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.6 | Gauge | read-only | The number of TP instances. |
| INT ibmappcInLtpLongRun | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.8 | INTEGER | read-only | The long running transaction program. |
| STR ibmappcInLtpLuName | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.1 | DisplayString | read-only | The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| INT ibmappcInLtpPfAllocSer | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.13 | INTEGER | read-only | The TP Allocate Service privileged function. This parameter specifies whether or not this program is allowed to issue the ALLOCATE verb with its TPN parameter specifying an SNA service transmission program. |
| INT ibmappcInLtpPfCnos | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.9 | INTEGER | read-only | The TP Change Number of Sessions (CNOS) privileged function. This parameter specifies whether or not this program is allowed to issue CNOS verbs. |
| INT ibmappcInLtpPfDefine | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.11 | INTEGER | read-only | The TP Define privileged function. This parameter specifies whether or not this program is allowed to issue DEFINE and DELETE verbs. |
| INT ibmappcInLtpPfDisplay | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.12 | INTEGER | read-only | The TP Display privileged function. This parameter specifies whether or not this program is allowed to issue DISPLAY verbs. |
| INT ibmappcInLtpPfSessCntl | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.10 | INTEGER | read-only | The TP Session Control privileged function. This parameter specifies whether or not this program is allowed to issue ACTIVATE_SESSION and DEACTIVATE_SESSION verbs. |
| INT ibmappcInLtpPipSubNum | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.19 | INTEGER | read-only | The TP number of pip subfields. |
| INT ibmappcInLtpRecoSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.15 | INTEGER | read-only | The TP reconnect supported parameter. |
| INT ibmappcInLtpRescSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.14 | INTEGER | read-only | The TP resources supported parameter. 1. basic conversations 2. mapped conversations 3. all conversations |
| INT ibmappcInLtpSecLvl | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.17 | INTEGER | read-only | The TP security level parameter. |
| INT ibmappcInLtpSecReq | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.16 | INTEGER | read-only | The TP security required parameter. |
| INT ibmappcInLtpStatus | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.7 | INTEGER | read-only | The TP status. |
| INT ibmappcInLtpSyncLvl | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.4 | INTEGER | read-only | The TP synchroniztion level. |
| ibmappcInLtpTable | 1.3.6.1.4.1.2.6.2.13.7.2.1.5 | not-accessible | APPC Local TP Table | |
| STR ibmappcInLtpTpName | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.2 | DisplayString | read-only | The local transaction program name. |
| INT ibmappcInLtpVerPip | 1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.18 | INTEGER | read-only | The TP verify pip parameter. |
| INT ibmappcInMdAcCrypto | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.24 | INTEGER | read-only | Active cryptography supported. |
| INT ibmappcInMdAcSyncLvl | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.22 | INTEGER | read-only | The active sync level. |
| GAU ibmappcInMdActClos | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.28 | Gauge | read-only | The number of active conlosers. |
| GAU ibmappcInMdActCwin | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.27 | Gauge | read-only | The number of active conwinners. |
| INT ibmappcInMdAltCode | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.26 | INTEGER | read-only | Alternate code supported. |
| INT ibmappcInMdAutoActLimit | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.8 | INTEGER | read-only | Auto Activate Limit. Specifies the maximum number of sessions which can be activated when this mode is active. |
| INT ibmappcInMdDefType | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.4 | INTEGER | read-only | Indicates whether the mode definition was specified in the nodes system definitions or was dynamically created. |
| INT ibmappcInMdDfCrypto | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.23 | INTEGER | read-only | Defined cryoptograhy supported. |
| INT ibmappcInMdDfSyncLvl | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.21 | INTEGER | read-only | The defined sync level. |
| INT ibmappcInMdDrainPart | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.10 | INTEGER | read-only | Drain Partner. Indicates whether or not the partner LU can be drained. |
| INT ibmappcInMdDrainSelf | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.9 | INTEGER | read-only | Drain Self. Indicates whether or not the local LU can be drained. |
| ibmappcInMdEntry | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1 | not-accessible | Entry of APPC Mode Information Table. | |
| GAU ibmappcInMdFreeSessLst | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.33 | Gauge | read-only | The size of the free seesion list. |
| STR ibmappcInMdLluName | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.1 | DisplayString | read-only | The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| INT ibmappcInMdMaxSessLimit | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.7 | INTEGER | read-only | Maximum Session Limit. Specifies the maximum number of sessions supported by the LU pair using this mode name. |
| INT ibmappcInMdMinClosLimit | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.12 | INTEGER | read-only | Minimum Conlossers Limit. Identifies the minimum number of conloser sessions. |
| INT ibmappcInMdMinCwinLimit | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.11 | INTEGER | read-only | Minimum Conwinners Limit. Identifies the minimum number of conwinner sessions. |
| STR ibmappcInMdModeName | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.3 | DisplayString | read-only | The mode name. |
| GAU ibmappcInMdPndClos | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.30 | Gauge | read-only | The number of pending conlosers. |
| GAU ibmappcInMdPndCwin | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.29 | Gauge | read-only | The number of pending conwinners. |
| INT ibmappcInMdPrefRecvRuSz | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.15 | INTEGER | read-only | The preferred receive ru size. |
| INT ibmappcInMdPrefSendRuSz | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.16 | INTEGER | read-only | The preferred send ru size. |
| GAU ibmappcInMdPtmClos | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.32 | Gauge | read-only | The number of pending termination conwinners. |
| GAU ibmappcInMdPtmCwin | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.31 | Gauge | read-only | The number of pending termination conlosers. |
| INT ibmappcInMdRecvPacWinSz | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.13 | INTEGER | read-only | The size of the receive pacing window. |
| INT ibmappcInMdRecvRuSzLoBnd | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.19 | INTEGER | read-only | The receive ru lower boundary size. |
| INT ibmappcInMdRecvRuSzUpBnd | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.17 | INTEGER | read-only | The receive ru upper boundary size. |
| INT ibmappcInMdReinit | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.25 | INTEGER | read-only | The reinitialization parameter. |
| STR ibmappcInMdRluName | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.2 | DisplayString | read-only | The network-qualified remote LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| INT ibmappcInMdSendPacWinSz | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.14 | INTEGER | read-only | The size of the send pacing window. |
| INT ibmappcInMdSendRuSzLoBnd | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.20 | INTEGER | read-only | The send ru lower boundary size. |
| INT ibmappcInMdSendRuSzUpBnd | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.18 | INTEGER | read-only | The send ru upper boundary size. |
| STR ibmappcInMdSessEndTpName | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.5 | DisplayString | read-only | The session end point transaction program name. |
| INT ibmappcInMdSessLimit | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.6 | INTEGER | read-only | Session Limit. Identifies the total number of sessions that can be established with the partner LU. |
| ibmappcInMdTable | 1.3.6.1.4.1.2.6.2.13.7.2.1.4 | not-accessible | APPC Mode Table | |
| GAU ibmappcInMdWaitReqLst | 1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.34 | Gauge | read-only | The size of the waiting request list. |
| INT ibmappcInRluActAllVerSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.14 | INTEGER | read-only | Active Already Verified Accepted. Indicates whether or not an attach, specifying that TP security has already been verified, is accepted by the adjacent CP LU. |
| INT ibmappcInRluActAttSecSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.15 | INTEGER | read-only | Active Attach Security Supported. Indicates whether or not the adjacent CP LU supports attach security. |
| INT ibmappcInRluActCnosSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.13 | INTEGER | read-only | Active CNOS Supported. Indicates whether or not Change Number of Sessions (CNOS) will be used to negotiate session limits between the logical points. |
| INT ibmappcInRluActEnhanSecSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.17 | INTEGER | read-only | Active Enhance Security Supported. Indicates the level of enhance security support: 1 = none 2 = level 1 3 = level 2 |
| INT ibmappcInRluActParaSessSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.12 | INTEGER | read-only | Active Parallel Sessions Supported. Indicates whether or not multiple session between the partner LU and its associated local LU are permitted. |
| INT ibmappcInRluActSessSecSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.16 | INTEGER | read-only | Active Session Security Supported. Indicates whether or not the adjacent CP LU may omit a password in the user data portion of the BIND. |
| INT ibmappcInRluActType | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.11 | INTEGER | read-only | Indicates whether the LU active definitions are currently active or not currently active. |
| INT ibmappcInRluDefAllVerSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.7 | INTEGER | read-only | Defined Already Verified Accepted. Indicates whether or not an attach, specifying that TP security has already been verified, is accepted by the adjacent CP LU. |
| INT ibmappcInRluDefAttSecSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.8 | INTEGER | read-only | Defined Attach Security Supported. Indicates whether or not the adjacent CP LU supports attach security. |
| INT ibmappcInRluDefCnosSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.6 | INTEGER | read-only | Defined CNOS Supported. Indicates whether or not Change Number of Sessions (CNOS) will be used to negotiate session limits between the logical points. |
| INT ibmappcInRluDefEnhanSecSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.10 | INTEGER | read-only | Defined Enhance Security Supported. Indicates the level of enhance security support: 1 = none 2 = level 1 3 = level 2 |
| INT ibmappcInRluDefParaSessSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.5 | INTEGER | read-only | Defined Parallel Sessions Supported. Indicates whether or not multiple session between the partner LU and its associated local LU are permitted. |
| INT ibmappcInRluDefSessSecSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.9 | INTEGER | read-only | Defined Session Security Supported. Indicates whether or not the adjacent CP LU may omit a password in the user data portion of the BIND. |
| INT ibmappcInRluDefType | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.4 | INTEGER | read-only | Indicates whether the LU definition was specified in the nodes system definitions or was dynamically created. |
| ibmappcInRluEntry | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1 | not-accessible | Entry of APPC Remote Partner Lu Information Table. | |
| STR ibmappcInRluLocLuName | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.1 | DisplayString | read-only | The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| STR ibmappcInRluParLuLocName | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.3 | DisplayString | read-only | The network-qualified partner LU local name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| STR ibmappcInRluParLuName | 1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.2 | DisplayString | read-only | The network-qualified partner LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| ibmappcInRluTable | 1.3.6.1.4.1.2.6.2.13.7.2.1.3 | not-accessible | APPC Remote Partner Lu Table | |
| STR ibmappcInSsCosName | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.6 | DisplayString | read-only | The Class of Service (COS) name used for this session. This is a 1-8 character name. |
| TIK ibmappcInSsCtrUpTime | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.22 | TimeTicks | read-only | Length of time the session counters have been active in hundreds of a second. |
| INT ibmappcInSsEnhanceSecSup | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.13 | INTEGER | read-only | Enhanced security supported. Indicates the level of enhance security support: 1 = none 2 = level 1 3 = level 2 |
| ibmappcInSsEntry | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1 | not-accessible | Entry of APPC Session Information Table. | |
| STR ibmappcInSsFqLuName | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.1 | DisplayString | read-only | The network-qualified CP name or PU name of the node at which the session and cid originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving the LEN node at which the origin LU is located. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| STR ibmappcInSsModeName | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.5 | DisplayString | read-only | The Mode Name name used for this session. This is a 1-8 character name. |
| CTR ibmappcInSsP2SFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.27 | Counter | read-only | Number of FMD Bytes sent from the Primary LU to the Secondary LU |
| CTR ibmappcInSsP2SFmdPius | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.23 | Counter | read-only | Number of FMD PIUs sent from the Primary LU to the Secondary LU |
| CTR ibmappcInSsP2SNonFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.29 | Counter | read-only | Number of non-FMD Bytes sent from the Primary LU to the Secondary LU |
| CTR ibmappcInSsP2SNonFmdPius | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.25 | Counter | read-only | Number of non-FMD PIUs sent from the Primary LU to the Secondary LU |
| INT ibmappcInSsPaceType | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.10 | INTEGER | read-only | The type of pacing used for this session. |
| OCT ibmappcInSsPcid | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.2 | OCTET STRING | read-only | The procedure correlation identifier (pcid) of a session. It is an 8-octet value assigned by the primary LU. |
| STR ibmappcInSsPluName | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.3 | DisplayString | read-only | The primary LU name of the session. |
| INT ibmappcInSsRecvMaxRuSz | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.12 | INTEGER | read-only | The maximum ru size which can be received. |
| GAU ibmappcInSsRecvNxWndwSize | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.19 | Gauge | read-only | The size of the next window which will be used to receive data. |
| INT ibmappcInSsRecvPacingType | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.17 | INTEGER | read-only | The type of pacing being used for receiving data. |
| GAU ibmappcInSsRecvRpc | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.18 | Gauge | read-only | The receive residual pace count. This represents the number of MU's that can still be received in the current session window. |
| OCT ibmappcInSsRscv | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.31 | OCTET STRING | read-only | The route selection control vector (RSCV x'2B') used for this session. It is not present for APPN CP-CP sessions and also not present for LEN nodes. The format of this vector is described in SNA Formats. |
| CTR ibmappcInSsS2PFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.28 | Counter | read-only | Number of FMD Bytes sent from the Secondary LU to the Primary LU |
| CTR ibmappcInSsS2PFmdPius | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.24 | Counter | read-only | Number of FMD PIUs sent from the Secondary LU to the Primary LU |
| CTR ibmappcInSsS2PNonFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.30 | Counter | read-only | Number of non-FMD Bytes sent from the Secondary LU to the Primary LU |
| CTR ibmappcInSsS2PNonFmdPius | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.26 | Counter | read-only | Number of non-FMD PIUs sent from the Secondary LU to the Primary LU |
| INT ibmappcInSsSendMaxRuSz | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.11 | INTEGER | read-only | The maximum ru size which can be sent. |
| GAU ibmappcInSsSendNxWndwSize | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.16 | Gauge | read-only | The size of the next window which will be used to send data. |
| INT ibmappcInSsSendPacingType | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.14 | INTEGER | read-only | The type of pacing being used for sending data. |
| GAU ibmappcInSsSendRpc | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.15 | Gauge | read-only | The send residual pace count. This represents the number of MU's that can still be sent in the current session window. |
| TIK ibmappcInSsSessStartTime | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.20 | TimeTicks | read-only | Time when the session started in hundreds of a second. |
| INT ibmappcInSsSessState | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.8 | INTEGER | read-only | Indicates the state of the session. 1. session is pending inactive or, 2. session is pending active or, 3. session is active or, 4. session is inactive |
| INT ibmappcInSsSessType | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.7 | INTEGER | read-only | The type of session. |
| TIK ibmappcInSsSessUpTime | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.21 | TimeTicks | read-only | Length of time the session has been active in hundreds of a second. |
| STR ibmappcInSsSluName | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.4 | DisplayString | read-only | The secondary LU name of the session. |
| STR ibmappcInSsStatusComponentId | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.9 | DisplayString | read-only | The name of the component which sent the entry. |
| STR ibmappcInSsStatusDetectModule | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.10 | DisplayString | read-only | The name of the module which detected the condition and sent the entry. |
| ibmappcInSsStatusEntry | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1 | not-accessible | Entry of APPC Session Status Information Table. This table is indexed by the SsStatusIndex, which is an integer that is continuously updated until it eventually wraps. This provides the management station the ability to retrieve only the updates to the table by using the standard GET NEXT. | |
| INT ibmappcInSsStatusIndex | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.1 | INTEGER | read-only | Table index. The value of the index begins at zero and is incremented up to a maximum value of 2**31-1 (2,147,483,647) before wrapping. |
| STR ibmappcInSsStatusLocLuName | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.4 | DisplayString | read-only | The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| STR ibmappcInSsStatusModeName | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.6 | DisplayString | read-only | The mode name. |
| STR ibmappcInSsStatusParLuName | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.5 | DisplayString | read-only | The network-qualified partner LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| OCT ibmappcInSsStatusSenseCode | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.8 | OCTET STRING | read-only | The sense code associated with the termination of the session. This value consists of four (4) octets; and its meaning is defined in SNA Formats. |
| ibmappcInSsStatusTable | 1.3.6.1.4.1.2.6.2.13.7.2.1.7 | not-accessible | APPC Session Status Table | |
| TIK ibmappcInSsStatusTime | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.2 | TimeTicks | read-only | Time (in hundreds of a second) since this node was last initialized. |
| INT ibmappcInSsStatusType | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.3 | INTEGER | read-only | Indicates the entry type: 1. Received a negative bind response from the partner LU. 2. Sent a negative bind response to the partner LU. 3. Session activation rejected by the partner LU. 4. Unbind sent to the partner LU. 5. Unbind received from the partner LU. |
| OCT ibmappcInSsStatusUnbindType | 1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.7 | OCTET STRING | read-only | The type of unbind which terminated the session. This value is consists of one (1) octet; and its meaning is defined in SNA Formats. |
| ibmappcInSsTable | 1.3.6.1.4.1.2.6.2.13.7.2.1.6 | not-accessible | APPC Session Table | |
| INT ibmappcInSsTransPriority | 1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.9 | INTEGER | read-only | The transmission priority of this session. |
| ibmapple | 1.3.6.1.4.1.2.6.2.16 | |||
| ibmappn | 1.3.6.1.4.1.2.6.2.13 | |||
| ibmappnConvEndPoint | 1.3.6.1.4.1.2.6.2.13.8.2 | |||
| ibmappnConversation | 1.3.6.1.4.1.2.6.2.13.8 | |||
| ibmappnConvGeneral | 1.3.6.1.4.1.2.6.2.13.8.1 | |||
| ibmappnCos | 1.3.6.1.4.1.2.6.2.13.6 | |||
| STR ibmappnCosModeCosName | 1.3.6.1.4.1.2.6.2.13.6.1.1.2 | DisplayString | read-only | An administratively assigned name for this Class of Service. |
| ibmappnCosModeEntry | 1.3.6.1.4.1.2.6.2.13.6.1.1 | not-accessible | This table is indexed by the Mode Name. | |
| STR ibmappnCosModeName | 1.3.6.1.4.1.2.6.2.13.6.1.1.1 | DisplayString | read-only | Administratively-assigned name for this mode entry. |
| ibmappnCosModeTable | 1.3.6.1.4.1.2.6.2.13.6.1 | not-accessible | Table representing all of the defined mode names for this node. The table contains the matching COS name. | |
| STR ibmappnCosName | 1.3.6.1.4.1.2.6.2.13.6.2.1.1 | DisplayString | read-only | Administratively-assigned name for this class of service. |
| ibmappnCosNameEntry | 1.3.6.1.4.1.2.6.2.13.6.2.1 | not-accessible | The COS name is the index to this table. | |
| ibmappnCosNameTable | 1.3.6.1.4.1.2.6.2.13.6.2 | not-accessible | Table representing all of the defined class-of-service names for this node. The COS node and TG tables are accessed using the same index, which is the COS name. | |
| ibmappnCosNodeRowEntry | 1.3.6.1.4.1.2.6.2.13.6.3.1 | not-accessible | The COS name is the first index and a integer is the second index to insure a unique index. | |
| INT ibmappnCosNodeRowIndex | 1.3.6.1.4.1.2.6.2.13.6.3.1.2 | INTEGER | read-only | Index of COS name. This same value is used to access the node and TG COS tables. Range of values is 0-255. |
| INT ibmappnCosNodeRowMaxCongestAllow | 1.3.6.1.4.1.2.6.2.13.6.3.1.7 | INTEGER | read-only | Indicates whether high congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used. |
| INT ibmappnCosNodeRowMinCongestAllow | 1.3.6.1.4.1.2.6.2.13.6.3.1.6 | INTEGER | read-only | Indicates whether low congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used. |
| STR ibmappnCosNodeRowName | 1.3.6.1.4.1.2.6.2.13.6.3.1.1 | DisplayString | read-only | Administratively-assigned name for this class of service. |
| INT ibmappnCosNodeRowResistMax | 1.3.6.1.4.1.2.6.2.13.6.3.1.5 | INTEGER | read-only | Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing. |
| INT ibmappnCosNodeRowResistMin | 1.3.6.1.4.1.2.6.2.13.6.3.1.4 | INTEGER | read-only | Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing. |
| ibmappnCosNodeRowTable | 1.3.6.1.4.1.2.6.2.13.6.3 | not-accessible | This table contains all node-row information for all class of service in this node. | |
| STR ibmappnCosNodeRowWgt | 1.3.6.1.4.1.2.6.2.13.6.3.1.3 | DisplayString | read-only | Weight to be associated with the nodes that fit the criteria specified by this node row. |
| INT ibmappnCosTgRowByteCostMax | 1.3.6.1.4.1.2.6.2.13.6.4.1.9 | INTEGER | read-only | Maximum acceptable cost per byte for this Class of Service. |
| INT ibmappnCosTgRowByteCostMin | 1.3.6.1.4.1.2.6.2.13.6.4.1.8 | INTEGER | read-only | Minimum acceptable cost per byte for this Class of Service. |
| INT ibmappnCosTgRowConnCostMax | 1.3.6.1.4.1.2.6.2.13.6.4.1.7 | INTEGER | read-only | Maximum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255. |
| INT ibmappnCosTgRowConnCostMin | 1.3.6.1.4.1.2.6.2.13.6.4.1.6 | INTEGER | read-only | Minimum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255. |
| INT ibmappnCosTgRowDelayMax | 1.3.6.1.4.1.2.6.2.13.6.4.1.13 | INTEGER | read-only | Maximum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with the more values enumerated. |
| INT ibmappnCosTgRowDelayMin | 1.3.6.1.4.1.2.6.2.13.6.4.1.12 | INTEGER | read-only | Minimum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with the more values enumerated. |
| INT ibmappnCosTgRowEffCapMax | 1.3.6.1.4.1.2.6.2.13.6.4.1.5 | INTEGER | read-only | Maximum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. |
| INT ibmappnCosTgRowEffCapMin | 1.3.6.1.4.1.2.6.2.13.6.4.1.4 | INTEGER | read-only | Minimum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. |
| ibmappnCosTgRowEntry | 1.3.6.1.4.1.2.6.2.13.6.4.1 | not-accessible | The TgRowName and the TgRowIndex are the index for this table. | |
| INT ibmappnCosTgRowIndex | 1.3.6.1.4.1.2.6.2.13.6.4.1.2 | INTEGER | read-only | Index of COS name. This same value is used to access the node and TG COS tables. |
| STR ibmappnCosTgRowName | 1.3.6.1.4.1.2.6.2.13.6.4.1.1 | DisplayString | read-only | Administratively-assigned name for this class of service. |
| INT ibmappnCosTgRowSecurityMax | 1.3.6.1.4.1.2.6.2.13.6.4.1.11 | INTEGER | read-only | Maximum acceptable security for this Class of Service. |
| INT ibmappnCosTgRowSecurityMin | 1.3.6.1.4.1.2.6.2.13.6.4.1.10 | INTEGER | read-only | Minimum acceptable security for this Class of Service. |
| ibmappnCosTgRowTable | 1.3.6.1.4.1.2.6.2.13.6.4 | not-accessible | Table containing all the Tg-row information for all class of service defined in this node. | |
| INT ibmappnCosTgRowUsr1Max | 1.3.6.1.4.1.2.6.2.13.6.4.1.15 | INTEGER | read-only | Maximum acceptable value for this user defined characteristic. Range of values is 0-255. |
| INT ibmappnCosTgRowUsr1Min | 1.3.6.1.4.1.2.6.2.13.6.4.1.14 | INTEGER | read-only | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| INT ibmappnCosTgRowUsr2Max | 1.3.6.1.4.1.2.6.2.13.6.4.1.17 | INTEGER | read-only | A Maximum acceptable value for this user defined characteristic. |
| INT ibmappnCosTgRowUsr2Min | 1.3.6.1.4.1.2.6.2.13.6.4.1.16 | INTEGER | read-only | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| INT ibmappnCosTgRowUsr3Max | 1.3.6.1.4.1.2.6.2.13.6.4.1.19 | INTEGER | read-only | Maximum acceptable value for this user defined characteristic. Range of values is 0-255. |
| INT ibmappnCosTgRowUsr3Min | 1.3.6.1.4.1.2.6.2.13.6.4.1.18 | INTEGER | read-only | Minimum acceptable value for this user defined characteristic. Range of values is 0-255. |
| STR ibmappnCosTgRowWgt | 1.3.6.1.4.1.2.6.2.13.6.4.1.3 | DisplayString | read-only | Weight to be associated with the nodes that fit the criteria specified by this tg-row. |
| INT ibmappnCosTransPriority | 1.3.6.1.4.1.2.6.2.13.6.2.1.2 | INTEGER | read-only | Transmission priority for this class of service. Values are: Low Medium High Network |
| ibmappnDir | 1.3.6.1.4.1.2.6.2.13.5 | |||
| GAU ibmappnDirCurCaches | 1.3.6.1.4.1.2.6.2.13.5.1.2 | Gauge | read-only | Current number of cache entries. |
| GAU ibmappnDirCurHomeEntries | 1.3.6.1.4.1.2.6.2.13.5.1.3 | Gauge | read-only | Current number of home entries. |
| ibmappnDirEntry | 1.3.6.1.4.1.2.6.2.13.5.2.1 | not-accessible | This table is indexed by the LU name. | |
| CTR ibmappnDirInBcastLocates | 1.3.6.1.4.1.2.6.2.13.5.1.6 | Counter | read-only | Number of broadcast locates received. |
| CTR ibmappnDirInLocates | 1.3.6.1.4.1.2.6.2.13.5.1.5 | Counter | read-only | Number of directed locates received. |
| GAU ibmappnDirLocateOutstands | 1.3.6.1.4.1.2.6.2.13.5.1.11 | Gauge | read-only | Current number of outstanding locates, both directed and broadcast. This value varies. A value of zero indicates that no locates are unanswered. |
| INT ibmappnDirLuLocation | 1.3.6.1.4.1.2.6.2.13.5.2.1.4 | INTEGER | read-only | Specifies the location of the LU. |
| STR ibmappnDirLuName | 1.3.6.1.4.1.2.6.2.13.5.2.1.1 | DisplayString | read-only | Fully-qualified network LU name in the domain of the serving network node. |
| STR ibmappnDirLuOwnerName | 1.3.6.1.4.1.2.6.2.13.5.2.1.3 | DisplayString | read-only | Fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an unassociated end node. It is also the same as the fully-qualified LU name when this is the control point LU for this node. |
| INT ibmappnDirMaxCaches | 1.3.6.1.4.1.2.6.2.13.5.1.1 | INTEGER | read-only | Maximum number of cache entries allowed. This is an administratively assigned value. |
| CTR ibmappnDirNotFoundBcastLocates | 1.3.6.1.4.1.2.6.2.13.5.1.10 | Counter | read-only | Number of broadcast locates returned with a not found. |
| CTR ibmappnDirNotFoundLocates | 1.3.6.1.4.1.2.6.2.13.5.1.9 | Counter | read-only | Number of directed locates returned with a 'not found'. |
| CTR ibmappnDirOutBcastLocates | 1.3.6.1.4.1.2.6.2.13.5.1.8 | Counter | read-only | Number of broadcast locates sent. |
| CTR ibmappnDirOutLocates | 1.3.6.1.4.1.2.6.2.13.5.1.7 | Counter | read-only | Number of directed locates sent. |
| ibmappnDirPerf | 1.3.6.1.4.1.2.6.2.13.5.1 | |||
| GAU ibmappnDirRegEntries | 1.3.6.1.4.1.2.6.2.13.5.1.4 | Gauge | read-only | Current number of registered entries. |
| STR ibmappnDirServerName | 1.3.6.1.4.1.2.6.2.13.5.2.1.2 | DisplayString | read-only | Fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully-qualified name is returned. |
| ibmappnDirTable | 1.3.6.1.4.1.2.6.2.13.5.2 | not-accessible | Table containing information about all known LUs and TPs. | |
| INT ibmappnDirType | 1.3.6.1.4.1.2.6.2.13.5.2.1.5 | INTEGER | read-only | Directory types are: 1 - Home The LU is in the domain of the local network node and the LU information has been configured at the local node. 2 - Cache The LU has previously been located by a broadcast search and the location information has been saved. 3 - Register The LU is at an end node that is in the domain of the local network node. Registered entries are registered by the served end node. |
| INT ibmappnDirWildCard | 1.3.6.1.4.1.2.6.2.13.5.2.1.6 | INTEGER | read-only | 1 - Other means unknown type of LU entry. 2 - Expliced-entry means the full LUNAME will be used for locating this LU. 3 - Partial-wildcard means only the non-blank portions of the LUNAME will be used for locating this LU. 4 - Full-wildcard means all LUNAMES will be directed to this LU. |
| ibmappnEnUniqueCaps | 1.3.6.1.4.1.2.6.2.13.1.3 | |||
| ibmappnGeneralInfoAndCaps | 1.3.6.1.4.1.2.6.2.13.1.1 | |||
| INT ibmappnIsAcBtypeActive | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.2 | INTEGER | read-write | Indicates whether or not the buffer media is active. 1. no: indicates the buffer media is not currently used for recording. 2. yes: indicates the buffer media is currently being used for recording. |
| INT ibmappnIsAcBtypeCheckPts | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.17 | INTEGER | read-only | The number of times a buffer of this type has been recorded to for checkpointing active intermediate sessions. |
| INT ibmappnIsAcBtypeClearStats | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.21 | INTEGER | read-write | By setting this object to yes, all statistics for this media type will be cleared (set to zero); and the Btype reset counter will be incremented. Objects affected by this include: - ibmappnIsAcBtypeFullTime - ibmappnIsAcBtypeFullReason - ibmappnIsAcBtypeFullWraps - ibmappnIsAcBtypeFullLosts - ibmappnIsAcBtypeErrorWraps - ibmappnIsAcBtypeErrorLosts - ibmappnIsAcBtypeCheckPts - ibmappnIsAcBtypePurges - ibmappnIsAcBtypeDeletes |
| GAU ibmappnIsAcBtypeCurBufs | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.6 | Gauge | read-only | The current number of buffer media. This is the sum of all full and in use buffers of this type. |
| INT ibmappnIsAcBtypeDeletes | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.19 | INTEGER | read-only | The number of times an entry has been deleted from a buffer of this type. |
| STR ibmappnIsAcBtypeDirName | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.3 | DisplayString | read-only | The name of the directory which will be used to allocate and write buffers of this type. For memory buffer types, this field will be NULL. |
| ibmappnIsAcBtypeEntry | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1 | not-accessible | Entry of Intermediate Session Accounting Buffer Type Table. | |
| INT ibmappnIsAcBtypeErrorLosts | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.16 | INTEGER | read-only | The number of accounting records lost to due to other reasons, (e.g. I/O error, software error) while not in a full condition. |
| INT ibmappnIsAcBtypeErrorWraps | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.15 | INTEGER | read-only | The number of accounting records lost to due to other reasons, (e.g. I/O error, software error) while in a wrap condition. |
| INT ibmappnIsAcBtypeFullAction | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.10 | INTEGER | read-write | This defines the behaviour used when all buffer medias are full. (1) halt: stop creating new records (2) wrap: overwrite the existing records. |
| INT ibmappnIsAcBtypeFullLosts | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.14 | INTEGER | read-only | The number of new accounting records lost due to the buffer full situation. |
| INT ibmappnIsAcBtypeFullReason | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.12 | INTEGER | read-only | The reason the buffer media is full. (1) The media is not full. (2) The maximum number of buffers have been reach, all buffers are full and the full action is halt. (3) The maximum number of buffers is zero or the maximum number of records is less than 5 or a unique record number cannot be generated. (4) Unable to write to the media due to I/O errors. |
| TIK ibmappnIsAcBtypeFullTime | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.11 | TimeTicks | read-only | The time which the full condition was encountered. This time is represented in hundreds of a second since the node was started. 2**32-1 (4,294,967,295), and wraps. |
| INT ibmappnIsAcBtypeFullWraps | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.13 | INTEGER | read-only | The number of accounting records being overwritten due to buffer full situation. |
| INT ibmappnIsAcBtypeMaxBufs | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.5 | INTEGER | read-write | The maximum number of buffer medias which will be used for recording accounting information. This value must be in the range of zero to the Product Maximum. |
| INT ibmappnIsAcBtypeMedia | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.1 | INTEGER | read-only | The media for storing the intermediate session accounting records. |
| INT ibmappnIsAcBtypePrdMaxBufs | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.4 | INTEGER | read-only | The maximum number of buffer medias supported by the product. |
| INT ibmappnIsAcBtypePrdRecPerBuf | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.7 | INTEGER | read-only | The maximum number of records supported by the product. |
| INT ibmappnIsAcBtypePurges | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.18 | INTEGER | read-only | The number of times a buffer of this type has been purged. |
| INT ibmappnIsAcBtypeRecFormat | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.9 | INTEGER | read-write | This defines the recording format of records. (1) ascii: records are recorded in ascii (english text format) (2) binary: records are recorded in binary (machine readable format) |
| INT ibmappnIsAcBtypeRecPerBuf | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.8 | INTEGER | read-write | The maximum number of records which will be recorded in an individual buffer. This value must be in the range of zero to the Product Maximum. |
| INT ibmappnIsAcBtypeResets | 1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.20 | INTEGER | read-only | The number of times the Btype counters have been reset as a result of a SET. |
| ibmappnIsAcBtypeTable | 1.3.6.1.4.1.2.6.2.13.7.3.2.2 | not-accessible | Intermediate Session Accounting Buffer Type Table | |
| ibmappnIsAcBufEntry | 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1 | not-accessible | Entry of Intermediate Session Accounting Buffer Table. | |
| INT ibmappnIsAcBufMaxRecords | 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.5 | INTEGER | read-only | The maximum number of records this buffer may contain. It is derived from the number of records per buffer set in the buffer type table. |
| INT ibmappnIsAcBufMedia | 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.1 | INTEGER | read-only | The media for storing the intermediate session accounting records. |
| STR ibmappnIsAcBufName | 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.8 | DisplayString | read-only | The name of the buffer. |
| INT ibmappnIsAcBufNewestIndex | 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.7 | INTEGER | read-only | The newest accounting index contained in this buffer. |
| INT ibmappnIsAcBufNumber | 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.2 | INTEGER | read-only | Number of the buffer. Each time a new buffer is used for recording, an incremented number will be assigned. Thus, the order of in which the buffers filled can be determined. |
| INT ibmappnIsAcBufOldestIndex | 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.6 | INTEGER | read-write | The oldest accounting index contained in this buffer. By setting this object, all records with indexes less than this value will be deleted. The set value must be greater than or equal to the current oldest index and less than or equal to the current newest index. Setting of this object will not be honored for all types of buffers. |
| INT ibmappnIsAcBufRecFormat | 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.4 | INTEGER | read-only | This defines the recording format of records. (1) ascii: records are recorded in ascii (english text format) (2) binary: records are recorded in binary (machine readable format) |
| INT ibmappnIsAcBufState | 1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.3 | INTEGER | read-write | The current buffer state. 1. complete: indicates the buffer is full or recording is not active for this buffer. In either case, the buffer is ready to be retrieved. This value may be specified in a SET operation to change a buffers state from active to complete. 2. active: indicates the buffer is currently being used for recording. This value is not valid for use in a SET operation. 3. purge: indicates the buffer should be purged. This value may be specified in a SET operation to remove a buffer. Specification of this value is only valid for complete buffers. It is not valid for active buffers. |
| ibmappnIsAcBufTable | 1.3.6.1.4.1.2.6.2.13.7.3.2.3 | not-accessible | Intermediate Session Accounting Buffer Table | |
| STR ibmappnIsAcCosName | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.9 | DisplayString | read-only | The class of service (cos) used for this session |
| ibmappnIsAccounting | 1.3.6.1.4.1.2.6.2.13.7.3.2 | |||
| TIK ibmappnIsAcCtrUpTime | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.15 | TimeTicks | read-only | Length of time the session counters have been active in hundreds of a second. |
| ibmappnIsAcDataEntry | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1 | not-accessible | Entry of Intermediate Session Accounting Data Table. | |
| ibmappnIsAcDataTable | 1.3.6.1.4.1.2.6.2.13.7.3.2.5 | not-accessible | Intermediate Session Accounting Data Table | |
| OCT ibmappnIsAcEndReason | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.16 | OCTET STRING | read-only | The SNA sense code which resulted when the session ended. |
| INT ibmappnIsAcEntryType | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.2 | INTEGER | read-only | Indicates whether the entry was made as the result of: 1. a session starting or, 2. a session ending or, 3. a session threshold reached or 4. a session checkpoint request |
| STR ibmappnIsAcFqLuName | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.4 | DisplayString | read-only | The network-qualified CP name or PU name of the node at which the session and pcid originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving the LEN node at which the origin LU is located. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| ibmappnIsAcGlobal | 1.3.6.1.4.1.2.6.2.13.7.3.2.1 | |||
| INT ibmappnIsAcGlobeByteThresh | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.2 | INTEGER | read-write | The byte threshold for recording accounting information for an active session. If the total of the byte counters (FmdBytes and NonFmdBtyes) is an even multiple of this non-zero value, statistics for this session will be recorded to all active buffers. A value of zero indicates that no byte threshold has been set. |
| INT ibmappnIsAcGlobeCheckPt | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.3 | INTEGER | read-write | By setting this value to yes, the agent will collect accounting information for all active sessions. This information will be recorded to all active buffers. |
| STR ibmappnIsAcGlobeMgrName | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.13 | DisplayString | read-write | The name of the manager who set the manager UTC times or NULL if the manager name has not been set. It contains: a. the network id of the manager, b. a period (.) c. the cp name of the manager. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation. |
| INT ibmappnIsAcGlobeMgrUtcHours | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.6 | INTEGER | read-write | The managers Coordinated Universal Time (UTC) hours. It contains an integer from 0 to 23. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation. |
| INT ibmappnIsAcGlobeMgrUtcIsdst | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.12 | INTEGER | read-write | The managers Coordinated Universal Time (UTC) daylight saving time flag. It is positive if daylight saving time is in effect. It is zero if daylight saving time is not in effect. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation. |
| INT ibmappnIsAcGlobeMgrUtcMdays | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.7 | INTEGER | read-write | The managers Coordinated Universal Time (UTC) day of the month. It contains an integer from 1 to 31; or 0 if the manager has not set this object. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation. |
| INT ibmappnIsAcGlobeMgrUtcMins | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.5 | INTEGER | read-write | The managers Coordinated Universal Time (UTC) minutes. It contains an integer from 0 to 59. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation. |
| INT ibmappnIsAcGlobeMgrUtcMonths | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.8 | INTEGER | read-write | The managers Coordinated Universal Time (UTC) months since January. It contains an integer from 0 to 11. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation. |
| INT ibmappnIsAcGlobeMgrUtcSecs | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.4 | INTEGER | read-write | The managers Coordinated Universal Time (UTC) seconds. It contains an integer from 0 to 59. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation. |
| INT ibmappnIsAcGlobeMgrUtcWdays | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.10 | INTEGER | read-write | The managers Coordinated Universal Time (UTC) days since Sunday. It contains an integer from 0 to 6. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation. |
| INT ibmappnIsAcGlobeMgrUtcYdays | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.11 | INTEGER | read-write | The managers Coordinated Universal Time (UTC) days since January 1. It contains an integer from 0 to 365. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation. |
| INT ibmappnIsAcGlobeMgrUtcYears | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.9 | INTEGER | read-write | The managers Coordinated Universal Time (UTC) years since 1900. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation. |
| INT ibmappnIsAcGlobeStatus | 1.3.6.1.4.1.2.6.2.13.7.3.2.1.1 | INTEGER | read-only | This object indicates the current status for accounting type. 1. indicates collection is not active for any media type. 2. indicates collection is active for at least one media type; and that media is not full. 3. indicates collection is active for at least one media type; but all active medias are full. |
| INT ibmappnIsAcIndex | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.1 | INTEGER | read-only | Session accounting record index. Upon initial startup, it will begin with 0, and increase up to maximum value of 2**31-1 (2,147,483,647), and wraps. Upon subsequent startups, it will be initialized with the value of the oldest index in any media type; or 0 if no indices are found. |
| STR ibmappnIsAcModeName | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.8 | DisplayString | read-only | The mode name used for this session |
| CTR ibmappnIsAcP2SFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.21 | Counter | read-only | The number of FMD bytes sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| CTR ibmappnIsAcP2SFmdPius | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.17 | Counter | read-only | The number of FMD PIU's sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| CTR ibmappnIsAcP2SNonFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.23 | Counter | read-only | The number of non-FMD bytes sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| CTR ibmappnIsAcP2SNonFmdPius | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.19 | Counter | read-only | The number of non-FMD PIU's sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| OCT ibmappnIsAcPcid | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.5 | OCTET STRING | read-only | The procedure correlation identifier (pcid) of a session. It is an 8-octet value assigned by the primary LU. |
| STR ibmappnIsAcPriLuName | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.6 | DisplayString | read-only | Primary LU Name of the session. |
| TIK ibmappnIsAcRecTime | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.3 | TimeTicks | read-only | Intermediate Session Record time. It represents the time in hundreds of a second since the node was started. 2**32-1 (4,294,967,295), and wraps. |
| OCT ibmappnIsAcRouteInfo | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.25 | OCTET STRING | read-only | The route selection control vector (RSCV x'2B') used for this session. It is present for APPN nodes; but is not present for LEN nodes. |
| CTR ibmappnIsAcS2PFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.22 | Counter | read-only | The number of FMD bytes sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| CTR ibmappnIsAcS2PFmdPius | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.18 | Counter | read-only | The number of FMD PIU's sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| CTR ibmappnIsAcS2PNonFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.24 | Counter | read-only | The number of non-FMD bytes sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| CTR ibmappnIsAcS2PNonFmdPius | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.20 | Counter | read-only | The number of non-FMD PIU's sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps. |
| STR ibmappnIsAcSecLuName | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.7 | DisplayString | read-only | Secondary LU Name of the session. |
| TIK ibmappnIsAcSessStartTime | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.13 | TimeTicks | read-only | Time when the session started in hundreds of a second. |
| INT ibmappnIsAcSessState | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.12 | INTEGER | read-only | Indicates the state of the session. 1. session is pending inactive or, 2. session is pending active or, 3. session is active or, 4. session is inactive |
| INT ibmappnIsAcSessType | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.11 | INTEGER | read-only | The type of intermediate session. |
| TIK ibmappnIsAcSessUpTime | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.14 | TimeTicks | read-only | Length of time the session has been active in hundreds of a second. |
| STR ibmappnIsAcTimeAgtName | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.14 | DisplayString | read-only | The name of the agent who set the agent UTC times. It contains: a. the network id of the agent, b. a period (.) c. the cp name of the agent. |
| INT ibmappnIsAcTimeAgtUtcHours | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.7 | INTEGER | read-only | The agents Coordinated Universal Time (UTC) hours. It contains an integer from 0 to 23. |
| INT ibmappnIsAcTimeAgtUtcIsdst | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.13 | INTEGER | read-only | The agents Coordinated Universal Time (UTC) daylight saving time flag. It is positive if daylight saving time is in effect. It is zero if daylight saving time is not in effect. |
| INT ibmappnIsAcTimeAgtUtcMdays | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.8 | INTEGER | read-only | The agents Coordinated Universal Time (UTC) day of the month. It contains an integer from 1 to 31. |
| INT ibmappnIsAcTimeAgtUtcMins | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.6 | INTEGER | read-only | The agents Coordinated Universal Time (UTC) minutes. It contains an integer from 0 to 59. |
| INT ibmappnIsAcTimeAgtUtcMonths | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.9 | INTEGER | read-only | The agents Coordinated Universal Time (UTC) months since January. It contains an integer from 0 to 11. |
| INT ibmappnIsAcTimeAgtUtcSecs | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.5 | INTEGER | read-only | The agents Coordinated Universal Time (UTC) seconds. It contains an integer from 0 to 59. |
| INT ibmappnIsAcTimeAgtUtcWdays | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.11 | INTEGER | read-only | The agents Coordinated Universal Time (UTC) days since Sunday. It contains an integer from 0 to 6. |
| INT ibmappnIsAcTimeAgtUtcYdays | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.12 | INTEGER | read-only | The agents Coordinated Universal Time (UTC) days since January 1. It contains an integer from 0 to 365. |
| INT ibmappnIsAcTimeAgtUtcYears | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.10 | INTEGER | read-only | The agents Coordinated Universal Time (UTC) years since 1900. |
| ibmappnIsAcTimeEntry | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1 | not-accessible | Entry of Intermediate Session Accounting Time Table. | |
| INT ibmappnIsAcTimeEntryType | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.2 | INTEGER | read-only | Indicates whether the entry was made as the result of: 1. a SET to start collecting accounting data, or 2. a SET to stop collecting accounting data, or 3. the creation of a new media to store accounting data, or 4. a media was full and wrapped (over writing records), or 5. the system time changed, or 6. a manager set the manager times and/or manager name, or 7. the record format for this media changed, or 8. time reference for the media |
| INT ibmappnIsAcTimeForMedia | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.3 | INTEGER | read-only | This object qualifies the time entry type. It indicates the media type for which the entry occured. |
| INT ibmappnIsAcTimeIndex | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.1 | INTEGER | read-only | Intermediate Session Time record index. It starts with 0, and increase up to maximum value of 2**31-1 (2,147,483,647), and wraps. |
| STR ibmappnIsAcTimeMgrName | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.24 | DisplayString | read-only | The name of the manager who set the manager UTC times or NULL if the manager name has not been set. It contains: a. the network id of the manager, b. a period (.) c. the cp name of the manager. |
| INT ibmappnIsAcTimeMgrTimeValid | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.25 | INTEGER | read-write | This indicates whether or not the the manager UTC times are valid. It is set by the manager if the manager determines the manager UTC times are valid. |
| INT ibmappnIsAcTimeMgrUtcHours | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.17 | INTEGER | read-only | The managers Coordinated Universal Time (UTC) hours. It contains an integer from 0 to 23. |
| INT ibmappnIsAcTimeMgrUtcIsdst | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.23 | INTEGER | read-only | The managers Coordinated Universal Time (UTC) daylight saving time flag. It is positive if daylight saving time is in effect. It is zero if daylight saving time is not in effect. |
| INT ibmappnIsAcTimeMgrUtcMdays | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.18 | INTEGER | read-only | The managers Coordinated Universal Time (UTC) day of the month. It contains an integer from 1 to 31; or 0 if the manager has not set this object. |
| INT ibmappnIsAcTimeMgrUtcMins | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.16 | INTEGER | read-only | The managers Coordinated Universal Time (UTC) minutes. It contains an integer from 0 to 59. |
| INT ibmappnIsAcTimeMgrUtcMonths | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.19 | INTEGER | read-only | The managers Coordinated Universal Time (UTC) months since January. It contains an integer from 0 to 11. |
| INT ibmappnIsAcTimeMgrUtcSecs | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.15 | INTEGER | read-only | The managers Coordinated Universal Time (UTC) seconds. It contains an integer from 0 to 59. |
| INT ibmappnIsAcTimeMgrUtcWdays | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.21 | INTEGER | read-only | The managers Coordinated Universal Time (UTC) days since Sunday. It contains an integer from 0 to 6. |
| INT ibmappnIsAcTimeMgrUtcYdays | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.22 | INTEGER | read-only | The managers Coordinated Universal Time (UTC) days since January 1. It contains an integer from 0 to 365. |
| INT ibmappnIsAcTimeMgrUtcYears | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.20 | INTEGER | read-only | The managers Coordinated Universal Time (UTC) years since 1900. |
| TIK ibmappnIsAcTimeRecTime | 1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.4 | TimeTicks | read-only | Intermediate Session Record time. It represents the time in hundreds of a second since the node was started. 2**32-1 (4,294,967,295), and wraps. |
| ibmappnIsAcTimeTable | 1.3.6.1.4.1.2.6.2.13.7.3.2.4 | not-accessible | Intermediate Session Accounting Time Table | |
| INT ibmappnIsAcTransPriority | 1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.10 | INTEGER | read-only | Transmission priority for this session. The values are: 1. Low 2. Medium 3. High 4. Network |
| STR ibmappnIsInCosName | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.6 | DisplayString | read-only | The Class of Service (COS) name used for this session. This is a 1-8 character name. |
| TIK ibmappnIsInCtrUpTime | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.12 | TimeTicks | read-only | Length of time the session counters have been active in hundreds of a second. |
| ibmappnIsInEntry | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1 | not-accessible | Entry of Intermediate Session Information Table. | |
| ibmappnIsInformation | 1.3.6.1.4.1.2.6.2.13.7.3.1 | |||
| STR ibmappnIsInFqLuName | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.1 | DisplayString | read-only | The network-qualified CP name or PU name of the node at which the session and cid originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving the LEN node at which the origin LU is located. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name. |
| ibmappnIsInGlobal | 1.3.6.1.4.1.2.6.2.13.7.3.1.1 | |||
| INT ibmappnIsInGlobeCtrStatus | 1.3.6.1.4.1.2.6.2.13.7.3.1.1.4 | INTEGER | read-write | Indicates whether or not the intermediate session counters are active. This object reflects the combination of the ibmappnIsInGlobeStatus object and the ibmappnIsAcBtypeActive object. The values are: 1. notActive: collection of counters and some names is not active. 2. active: collection of counters and some names is active. |
| TIK ibmappnIsInGlobeCtrStatusTime | 1.3.6.1.4.1.2.6.2.13.7.3.1.1.5 | TimeTicks | read-only | Time when the ibmappnIsInGlobeCtrStatus object last changed. This time is in hundreds of a second. |
| INT ibmappnIsInGlobeRscv | 1.3.6.1.4.1.2.6.2.13.7.3.1.1.2 | INTEGER | read-write | Indicates the current collection options in effect: 1. notActive: collection of route selection control vectors is not active. 2. active: collection of route selection control vectors is active. |
| TIK ibmappnIsInGlobeRscvTime | 1.3.6.1.4.1.2.6.2.13.7.3.1.1.3 | TimeTicks | read-only | Time when the ibmappnIsInGlobeRscv object last changed. This time is in hundreds of a second. |
| INT ibmappnIsInGlobeStatus | 1.3.6.1.4.1.2.6.2.13.7.3.1.1.1 | INTEGER | read-write | Indicates the current collection options in effect: 1. notActive: collection of counters and some names is not active. 2. active: collection of counters and some names is active. |
| STR ibmappnIsInModeName | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.5 | DisplayString | read-only | The Mode Name name used for this session. This is a 1-8 character name. |
| CTR ibmappnIsInP2SFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.17 | Counter | read-only | Number of FMD Bytes sent from the Primary LU to the Secondary LU |
| CTR ibmappnIsInP2SFmdPius | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.13 | Counter | read-only | Number of FMD PIUs sent from the Primary LU to the Secondary LU |
| CTR ibmappnIsInP2SNonFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.19 | Counter | read-only | Number of non-FMD Bytes sent from the Primary LU to the Secondary LU |
| CTR ibmappnIsInP2SNonFmdPius | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.15 | Counter | read-only | Number of non-FMD PIUs sent from the Primary LU to the Secondary LU |
| OCT ibmappnIsInPcid | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.2 | OCTET STRING | read-only | The procedure correlation identifier (pcid) of a session. It is an 8-octet value assigned by the primary LU. |
| STR ibmappnIsInPriLuName | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.3 | DisplayString | read-only | The primary LU name of the session. |
| STR ibmappnIsInPsAdjCpName | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.21 | DisplayString | read-only | The primary stage adjacent CP name of this session. |
| INT ibmappnIsInPsAdjTgNum | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.22 | INTEGER | read-only | The primary stage adjacent transmission group (TG) number associated with this session. |
| GAU ibmappnIsInPsRecvNxWndwSize | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.29 | Gauge | read-only | The primary stage size of the next window which will be used to receive data. |
| INT ibmappnIsInPsRecvPacingType | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.27 | INTEGER | read-only | The primary stage type of pacing being used for receiving data. |
| GAU ibmappnIsInPsRecvRpc | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.28 | Gauge | read-only | The primary stage receive residual pace count. This represents the primary stage number of MU's that can still be received in the current session window. |
| INT ibmappnIsInPsSendMaxBtuSize | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.23 | INTEGER | read-only | The primary stage maximum basic transmission size (BTU) for sending data. |
| GAU ibmappnIsInPsSendNxWndwSize | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.26 | Gauge | read-only | The primary stage size of the next window which will be used to send data. |
| INT ibmappnIsInPsSendPacingType | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.24 | INTEGER | read-only | The primary stage type of pacing being used for sending data. |
| GAU ibmappnIsInPsSendRpc | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.25 | Gauge | read-only | The primary stage send residual pace count. This represents the primary stage number of MU's that can still be sent in the current session window. |
| OCT ibmappnIsInRouteInfo | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.39 | OCTET STRING | read-only | The route selection control vector (RSCV x'2B') used for this session. It is present for APPN nodes; but is not present for LEN nodes. The format of this vector is described in SNA Formats. |
| CTR ibmappnIsInS2PFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.18 | Counter | read-only | Number of FMD Bytes sent from the Secondary LU to the Primary LU |
| CTR ibmappnIsInS2PFmdPius | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.14 | Counter | read-only | Number of FMD PIUs sent from the Secondary LU to the Primary LU |
| CTR ibmappnIsInS2PNonFmdBytes | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.20 | Counter | read-only | Number of non-FMD Bytes sent from the Secondary LU to the Primary LU |
| CTR ibmappnIsInS2PNonFmdPius | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.16 | Counter | read-only | Number of non-FMD PIUs sent from the Secondary LU to the Primary LU |
| STR ibmappnIsInSecLuName | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.4 | DisplayString | read-only | The secondary LU name of the session. |
| TIK ibmappnIsInSessStartTime | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.10 | TimeTicks | read-only | Time when the session started in hundreds of a second. |
| INT ibmappnIsInSessState | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.9 | INTEGER | read-write | Indicates the state of the session. 1. session is pending inactive or, 2. session is pending active or, 3. session is active or, 4. session is inactive Existing sessions can be deactivated by setting this object to inactive. |
| INT ibmappnIsInSessType | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.8 | INTEGER | read-only | The type of intermediate session. |
| TIK ibmappnIsInSessUpTime | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.11 | TimeTicks | read-only | Length of time the session has been active in hundreds of a second. |
| STR ibmappnIsInSsAdjCpName | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.30 | DisplayString | read-only | The secondary stage adjacent CP name of this session. |
| INT ibmappnIsInSsAdjTgNum | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.31 | INTEGER | read-only | The secondary stage adjacent transmission group (TG) number associated with this session. |
| GAU ibmappnIsInSsRecvNxWndwSize | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.38 | Gauge | read-only | The secondary stage size of the next window which will be used to receive data. |
| INT ibmappnIsInSsRecvPacingType | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.36 | INTEGER | read-only | The secondary stage type of pacing being used for receiving data. |
| GAU ibmappnIsInSsRecvRpc | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.37 | Gauge | read-only | The secondary stage send residual pace count. This represents the secondary stage number of MU's that can still be received in the current session window. |
| INT ibmappnIsInSsSendMaxBtuSize | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.32 | INTEGER | read-only | The secondary stage maximum basic transmission size (BTU) for sending data. |
| GAU ibmappnIsInSsSendNxWndwSize | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.35 | Gauge | read-only | The secondary stage size of the next window which will be used to send data. |
| INT ibmappnIsInSsSendPacingType | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.33 | INTEGER | read-only | The secondary stage type of pacing being used for sending data. |
| GAU ibmappnIsInSsSendRpc | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.34 | Gauge | read-only | The secondary stage send residual pace count. This represents the secondary stage number of MU's that can still be sent in the current session window. |
| ibmappnIsInTable | 1.3.6.1.4.1.2.6.2.13.7.3.1.2 | not-accessible | Intermediate Session Information Table | |
| INT ibmappnIsInTransPriority | 1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.7 | INTEGER | read-only | The transmission priority of this session. |
| ibmappnLinkStationInformation | 1.3.6.1.4.1.2.6.2.13.1.5 | |||
| ibmappnLocalEnEntry | 1.3.6.1.4.1.2.6.2.13.3.2.1.1 | not-accessible | This table is indexed by the end node CPname. | |
| INT ibmappnLocalEnEntryTimeLeft | 1.3.6.1.4.1.2.6.2.13.3.2.1.1.2 | INTEGER | read-only | Number of days before deletion of this end node entry. Range is 0-31. |
| STR ibmappnLocalEnName | 1.3.6.1.4.1.2.6.2.13.3.2.1.1.1 | DisplayString | read-only | Administratively-assigned fully-qualified name of end node in the format NETID.CPNAME. |
| ibmappnLocalEnTable | 1.3.6.1.4.1.2.6.2.13.3.2.1 | not-accessible | Portion of the APPN topology database that describes the end nodes known to this node. | |
| INT ibmappnLocalEnTgByteCost | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.11 | INTEGER | read-only | Relative cost of transmitting a byte over this link. Range is from 0, which means no cost, to 255. |
| INT ibmappnLocalEnTgConnCost | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.10 | INTEGER | read-only | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255. |
| INT ibmappnLocalEnTgCpCpSession | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.8 | INTEGER | read-only | Indicates whether CP-CP sessions are supported on this TG. |
| INT ibmappnLocalEnTgDelay | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.13 | INTEGER | read-only | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. |
| STR ibmappnLocalEnTgDest | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.2 | DisplayString | read-only | Administratively-assigned name for the destination node for this TG. This is the fully-qualified network name. |
| INT ibmappnLocalEnTgDestVirtual | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.5 | INTEGER | read-only | Indicates whether the destination node is a virtual node. |
| OCT ibmappnLocalEnTgDlcData | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.6 | OCTET STRING | read-only | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits |
| INT ibmappnLocalEnTgEffCap | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.9 | INTEGER | read-only | The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. |
| ibmappnLocalEnTgEntry | 1.3.6.1.4.1.2.6.2.13.3.2.2.1 | not-accessible | This table requires multiple indexes to uniquely identify each TG. They are originating CPname, destination CPname, and the TG number. | |
| INT ibmappnLocalEnTgEntryTimeLeft | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.4 | INTEGER | read-only | Number of days before deletion of this end node TG entry. Range is 0-31. |
| INT ibmappnLocalEnTgModemClass | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.14 | INTEGER | read-only | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non connection network it is zero. |
| INT ibmappnLocalEnTgNum | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.3 | INTEGER | read-only | Number associated with this transmission group. |
| INT ibmappnLocalEnTgOperational | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.7 | INTEGER | read-only | Indicates whether the Transmission Group is operational. |
| STR ibmappnLocalEnTgOrigin | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.1 | DisplayString | read-only | Administratively-assigned name for the origination node for this TG. This is the fully-qualified network name. |
| INT ibmappnLocalEnTgSecurity | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.12 | INTEGER | read-only | Security level for this TG. |
| ibmappnLocalEnTgTable | 1.3.6.1.4.1.2.6.2.13.3.2.2 | not-accessible | Table describing all of the TGs owned by the end nodes known to this node. The TG destination can be a virtual node, network node, or end node. | |
| INT ibmappnLocalEnTgUsr1 | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.15 | INTEGER | read-only | First user-defined TG characteristic for this TG. Range of values is 0-255. |
| INT ibmappnLocalEnTgUsr2 | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.16 | INTEGER | read-only | Second user-defined TG characteristic for this TG. Range of values is 0-255. |
| INT ibmappnLocalEnTgUsr3 | 1.3.6.1.4.1.2.6.2.13.3.2.2.1.17 | INTEGER | read-only | Third user-defined TG characteristic for this TG. Range of values is 0-255. |
| ibmappnLocalEnTopology | 1.3.6.1.4.1.2.6.2.13.3.2 | |||
| INT ibmappnLocalEnType | 1.3.6.1.4.1.2.6.2.13.3.2.1.1.3 | INTEGER | read-only | Type of APPN node (must always be a len or end node). |
| ibmappnLocalGeneral | 1.3.6.1.4.1.2.6.2.13.3.1.1 | |||
| INT ibmappnLocalNnCentralDirectory | 1.3.6.1.4.1.2.6.2.13.3.1.2.8 | INTEGER | read-only | Indicates whether the node is a central directory. |
| INT ibmappnLocalNnChainSupport | 1.3.6.1.4.1.2.6.2.13.3.1.2.10 | INTEGER | read-only | Indicates whether the node supports chaining. |
| INT ibmappnLocalNnCongested | 1.3.6.1.4.1.2.6.2.13.3.1.2.3 | INTEGER | read-only | Indicates whether this node is congested. Other network nodes stop routing traffic to this node while this flag is on. |
| INT ibmappnLocalNnEndptDepleted | 1.3.6.1.4.1.2.6.2.13.3.1.2.5 | INTEGER | read-only | Indicates whether session endpoint resources are depleted. |
| INT ibmappnLocalNnFrsn | 1.3.6.1.4.1.2.6.2.13.3.1.2.11 | INTEGER | read-only | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update to adjacent network nodes. |
| INT ibmappnLocalNnGateway | 1.3.6.1.4.1.2.6.2.13.3.1.2.7 | INTEGER | read-only | Indicates whether the node is a gateway. |
| INT ibmappnLocalNnIsr | 1.3.6.1.4.1.2.6.2.13.3.1.2.9 | INTEGER | read-only | Indicates whether the node supports intermediate session routing. |
| INT ibmappnLocalNnIsrDepleted | 1.3.6.1.4.1.2.6.2.13.3.1.2.4 | INTEGER | read-only | Indicate whether intermediated session routing resources are depleted. Other network nodes stop routing traffic through this node while this flag is on. |
| INT ibmappnLocalNnQuiescing | 1.3.6.1.4.1.2.6.2.13.3.1.2.6 | INTEGER | read-only | Indicates whether the node is quiescing. |
| INT ibmappnLocalNnRouteAddResist | 1.3.6.1.4.1.2.6.2.13.3.1.2.2 | INTEGER | read-only | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing. |
| INT ibmappnLocalNnRsn | 1.3.6.1.4.1.2.6.2.13.3.1.2.1 | INTEGER | read-only | Resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has occurred. |
| ibmappnLocalNnSpecific | 1.3.6.1.4.1.2.6.2.13.3.1.2 | |||
| STR ibmappnLocalNodeName | 1.3.6.1.4.1.2.6.2.13.3.1.1.1 | DisplayString | read-only | Administratively-assigned fully-qualified name for this node. Format is NETID.CPNAME. |
| INT ibmappnLocalNodeType | 1.3.6.1.4.1.2.6.2.13.3.1.1.2 | INTEGER | read-only | Type of APPN node. |
| ibmappnLocalTg | 1.3.6.1.4.1.2.6.2.13.3.1.3 | |||
| INT ibmappnLocalTgByteCost | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.11 | INTEGER | read-only | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. |
| INT ibmappnLocalTgConnCost | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.10 | INTEGER | read-only | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255. |
| INT ibmappnLocalTgCpCpSession | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.8 | INTEGER | read-only | Indicates whether the CP-CP Sessions are supported on this TG. |
| INT ibmappnLocalTgDelay | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.13 | INTEGER | read-only | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. |
| STR ibmappnLocalTgDest | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.1 | DisplayString | read-only | Administratively-assigned name for the destination node for this TG. This is the fully-qualified network node name. |
| INT ibmappnLocalTgDestVirtual | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.3 | INTEGER | read-only | Indicates whether the destination node is a Virtual node. |
| OCT ibmappnLocalTgDlcData | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.4 | OCTET STRING | read-only | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits |
| INT ibmappnLocalTgEffCap | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.9 | INTEGER | read-only | The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. |
| ibmappnLocalTgEntry | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1 | not-accessible | This table is indexed by the destination CPname and the TG number. | |
| INT ibmappnLocalTgModemClass | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.14 | INTEGER | read-only | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non-connection network it is zero. |
| INT ibmappnLocalTgNum | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.2 | INTEGER | read-only | Number associated with this transmission group. |
| INT ibmappnLocalTgOperational | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.7 | INTEGER | read-only | Indicates whether the Transmission Group is operational. |
| INT ibmappnLocalTgQuiescing | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.6 | INTEGER | read-only | Indicates whether the Transmission Group is quiescing. |
| INT ibmappnLocalTgRsn | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.5 | INTEGER | read-only | The resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has occurred. |
| INT ibmappnLocalTgSecurity | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.12 | INTEGER | read-only | Security level for this TG. |
| ibmappnLocalTgTable | 1.3.6.1.4.1.2.6.2.13.3.1.3.1 | not-accessible | TG Table describes all of the TGs owned by this node. The TG destination can be a virtual node, network node, len, or end node. | |
| INT ibmappnLocalTgUsr1 | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.15 | INTEGER | read-only | Value of the first user-defined TG characteristic for this TG. Range is 0-255. |
| INT ibmappnLocalTgUsr2 | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.16 | INTEGER | read-only | Value of the second user-defined TG characteristic for this TG. Range is 0-255. |
| INT ibmappnLocalTgUsr3 | 1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.17 | INTEGER | read-only | Value of the third user-defined TG characteristic for this TG. Range is 0-255. |
| ibmappnLocalThisNode | 1.3.6.1.4.1.2.6.2.13.3.1 | |||
| ibmappnLocalTopology | 1.3.6.1.4.1.2.6.2.13.3 | |||
| INT ibmappnMemoryCritThresh | 1.3.6.1.4.1.2.6.2.13.1.7.4 | INTEGER | read-only | Allocation threshold beyond which storage management considers the storage resources to be critically constrained. |
| INT ibmappnMemorySize | 1.3.6.1.4.1.2.6.2.13.1.7.1 | INTEGER | read-only | Size of the shared storage segment, as obtained by storage management from the underlying operating system. |
| ibmappnMemoryUse | 1.3.6.1.4.1.2.6.2.13.1.7 | |||
| INT ibmappnMemoryUsed | 1.3.6.1.4.1.2.6.2.13.1.7.2 | INTEGER | read-only | Number of bytes in the segment that are currently allocated to process. |
| INT ibmappnMemoryWarnThresh | 1.3.6.1.4.1.2.6.2.13.1.7.3 | INTEGER | read-only | Allocation threshold beyond which storage management considers the storage resources to be constrained. |
| ibmappnNn | 1.3.6.1.4.1.2.6.2.13.2 | |||
| STR ibmappnNnAdjNodeAdjName | 1.3.6.1.4.1.2.6.2.13.2.2.1.1 | DisplayString | read-only | An administratively-assigned fully-qualified name of this node's adjacent network node. |
| INT ibmappnNnAdjNodeCpCpSessStatus | 1.3.6.1.4.1.2.6.2.13.2.2.1.2 | INTEGER | read-only | Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Incative indicates no CP-CP sessions exists between this node and the adjacent node. Active indicates CP-CP sessons are active using both the ConWinner and ConLoser sessions. The session initiated by this node is refered to as the ConWinner session and is used by this node to send to the adjacent node. The ConLoserr session is initiated by the adjacent node and is used by this node to receive from the adjacent node. |
| ibmappnNnAdjNodeEntry | 1.3.6.1.4.1.2.6.2.13.2.2.1 | not-accessible | The adjacent node name is the index for this table. | |
| INT ibmappnNnAdjNodeLastFrsnRcvd | 1.3.6.1.4.1.2.6.2.13.2.2.1.5 | INTEGER | read-only | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU received from this adjacent node. |
| INT ibmappnNnAdjNodeLastFrsnSent | 1.3.6.1.4.1.2.6.2.13.2.2.1.4 | INTEGER | read-only | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU sent to this adjacent node. |
| GAU ibmappnNnAdjNodeOutOfSeqTdus | 1.3.6.1.4.1.2.6.2.13.2.2.1.3 | Gauge | read-only | Number of out of sequence Topology Database Updates (TDUs). In a quiesced state, this value is zero. In normal operation, the value varies depending on the network environment. |
| ibmappnNnAdjNodeTable | 1.3.6.1.4.1.2.6.2.13.2.2 | not-accessible | Table containing an entry for every node. The information kept in this table is the last FRSN sent and received, the status of the CP-CP sessions, and a gauge that indicates the number of outstanding TDUs. | |
| INT ibmappnNnNodeCentralDirectory | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.12 | INTEGER | read-only | Indicates whether the node is central directory. |
| INT ibmappnNnNodeChainSupport | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.14 | INTEGER | read-only | Indicates whether the node supports chaining. |
| INT ibmappnNnNodeCongested | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.7 | INTEGER | read-only | Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. |
| INT ibmappnNnNodeEndptDepleted | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.9 | INTEGER | read-only | Indicates whether session endpoint resources are depleted. |
| INT ibmappnNnNodeEntryTimeLeft | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.3 | INTEGER | read-only | Number of days before deletion of this network node entry. Range is 0-31. |
| INT ibmappnNnNodeFRCentralDirectory | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.12 | INTEGER | read-only | Indicates whether the node is central directory. |
| INT ibmappnNnNodeFRChainSupport | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.14 | INTEGER | read-only | Indicates whether the node supports chaining. |
| INT ibmappnNnNodeFRCongested | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.7 | INTEGER | read-only | Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. |
| INT ibmappnNnNodeFREndptDepleted | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.9 | INTEGER | read-only | Indicates whether session endpoint resources are depleted. |
| INT ibmappnNnNodeFREntryTimeLeft | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.3 | INTEGER | read-only | Number of days before deletion of this network node entry. Range is 0-31. |
| INT ibmappnNnNodeFRFrsn | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.2 | INTEGER | read-only | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node. |
| INT ibmappnNnNodeFRGateway | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.11 | INTEGER | read-only | Indicates whether the node provide gateway functions. |
| INT ibmappnNnNodeFRIsr | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.13 | INTEGER | read-only | Indicates whether the node supports intermediate session routing (ISR). |
| INT ibmappnNnNodeFRIsrDepleted | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.8 | INTEGER | read-only | Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted. |
| STR ibmappnNnNodeFRName | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.1 | DisplayString | read-only | Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME. |
| INT ibmappnNnNodeFRQuiescing | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.10 | INTEGER | read-only | Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. |
| INT ibmappnNnNodeFRRouteAddResist | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.6 | INTEGER | read-only | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing. |
| INT ibmappnNnNodeFRRsn | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.5 | INTEGER | read-only | Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred. |
| INT ibmappnNnNodeFrsn | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.2 | INTEGER | read-only | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node. |
| INT ibmappnNnNodeFRType | 1.3.6.1.4.1.2.6.2.13.2.3.3.1.4 | INTEGER | read-only | Type of APPN node. |
| INT ibmappnNnNodeGateway | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.11 | INTEGER | read-only | Indicates whether the node provide gateway functions. |
| INT ibmappnNnNodeIsr | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.13 | INTEGER | read-only | Indicates whether the node supports intermediate session routing (ISR). |
| INT ibmappnNnNodeIsrDepleted | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.8 | INTEGER | read-only | Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted. |
| STR ibmappnNnNodeName | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.1 | DisplayString | read-only | Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME. |
| INT ibmappnNnNodeQuiescing | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.10 | INTEGER | read-only | Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. |
| INT ibmappnNnNodeRouteAddResist | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.6 | INTEGER | read-only | Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing. |
| INT ibmappnNnNodeRsn | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.5 | INTEGER | read-only | Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred. |
| INT ibmappnNnNodeType | 1.3.6.1.4.1.2.6.2.13.2.3.1.1.4 | INTEGER | read-only | Type of APPN node. |
| INT ibmappnNnTgByteCost | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.14 | INTEGER | read-only | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgConnCost | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.13 | INTEGER | read-only | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgCpCpSession | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.11 | INTEGER | read-only | Indicates whether CP-CP sessions are supported on this TG. |
| INT ibmappnNnTgDelay | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.16 | INTEGER | read-only | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assigned value associated with this TG. |
| STR ibmappnNnTgDest | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.2 | DisplayString | read-only | Administratively-assigned fully-qualified network name for the destination node for this TG. |
| INT ibmappnNnTgDestVirtual | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.6 | INTEGER | read-only | Indicates whether the destination node is a virtual node. |
| OCT ibmappnNnTgDlcData | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.7 | OCTET STRING | read-only | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits |
| INT ibmappnNnTgEffCap | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.12 | INTEGER | read-only | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgEntryTimeLeft | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.5 | INTEGER | read-only | Number of days before deletion of this network node TG entry. Range is 0-31. |
| INT ibmappnNnTgFRByteCost | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.14 | INTEGER | read-only | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgFRConnCost | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.13 | INTEGER | read-only | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgFRCpCpSession | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.11 | INTEGER | read-only | Indicates whether CP-CP sessions are supported on this TG. |
| INT ibmappnNnTgFRDelay | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.16 | INTEGER | read-only | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assigned value associated with this TG. |
| STR ibmappnNnTgFRDest | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.2 | DisplayString | read-only | Administratively-assigned fully-qualified network name for the destination node for this TG. |
| INT ibmappnNnTgFRDestVirtual | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.6 | INTEGER | read-only | Indicates whether the destination node is a virtual node. |
| OCT ibmappnNnTgFRDlcData | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.7 | OCTET STRING | read-only | DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits |
| INT ibmappnNnTgFREffCap | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.12 | INTEGER | read-only | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgFREntryTimeLeft | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.5 | INTEGER | read-only | Number of days before deletion of this network node TG entry. Range is 0-31. |
| INT ibmappnNnTgFRFrsn | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.4 | INTEGER | read-only | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node. |
| INT ibmappnNnTgFRModemClass | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.17 | INTEGER | read-only | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'. |
| INT ibmappnNnTgFRNum | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.3 | INTEGER | read-only | Number associated with this transmission group. Range is 0-255. |
| INT ibmappnNnTgFROperational | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.9 | INTEGER | read-only | Indicates whether the transmission group is operational. |
| STR ibmappnNnTgFROwner | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.1 | DisplayString | read-only | Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table. |
| INT ibmappnNnTgFRQuiescing | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.10 | INTEGER | read-only | Indicates whether the transmission group is quiescing. |
| INT ibmappnNnTgFRRsn | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.8 | INTEGER | read-only | Current owning node's resource sequence number for this resource. |
| INT ibmappnNnTgFRSecurity | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.15 | INTEGER | read-only | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgFrsn | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.4 | INTEGER | read-only | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node. |
| INT ibmappnNnTgFRUsr1 | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.18 | INTEGER | read-only | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgFRUsr2 | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.19 | INTEGER | read-only | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgFRUsr3 | 1.3.6.1.4.1.2.6.2.13.2.3.4.1.20 | INTEGER | read-only | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgModemClass | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.17 | INTEGER | read-only | This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'. |
| INT ibmappnNnTgNum | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.3 | INTEGER | read-only | Number associated with this transmission group. Range is 0-255. |
| INT ibmappnNnTgOperational | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.9 | INTEGER | read-only | Indicates whether the transmission group is operational. |
| STR ibmappnNnTgOwner | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.1 | DisplayString | read-only | Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table. |
| INT ibmappnNnTgQuiescing | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.10 | INTEGER | read-only | Indicates whether the transmission group is quiescing. |
| INT ibmappnNnTgRsn | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.8 | INTEGER | read-only | Current owning node's resource sequence number for this resource. |
| INT ibmappnNnTgSecurity | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.15 | INTEGER | read-only | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG. |
| ibmappnNnTgTopologyEntry | 1.3.6.1.4.1.2.6.2.13.2.3.2.1 | not-accessible | This table requires three indexes to provide a unique index. The indexes are the owning or originating CPname, the destination CPname, and the TG number. | |
| ibmappnNnTgTopologyFREntry | 1.3.6.1.4.1.2.6.2.13.2.3.4.1 | not-accessible | This table is indexed by four columns: FRSN, TG owner fully-qualified node name, TG destination fully-qualified node name, TG number. | |
| ibmappnNnTgTopologyFRTable | 1.3.6.1.4.1.2.6.2.13.2.3.4 | not-accessible | Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes. | |
| ibmappnNnTgTopologyTable | 1.3.6.1.4.1.2.6.2.13.2.3.2 | not-accessible | Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes. | |
| INT ibmappnNnTgUsr1 | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.18 | INTEGER | read-only | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgUsr2 | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.19 | INTEGER | read-only | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| INT ibmappnNnTgUsr3 | 1.3.6.1.4.1.2.6.2.13.2.3.2.1.20 | INTEGER | read-only | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG. |
| ibmappnNnTopo | 1.3.6.1.4.1.2.6.2.13.2.1 | |||
| GAU ibmappnNnTopoCurNumNodes | 1.3.6.1.4.1.2.6.2.13.2.1.2 | Gauge | read-only | Current number of nodes in this node's topology database. If this value exceeds the maximum number of nodes allowed (NnTopoMaxNodes), APPN alert CPDB002 is issued. |
| CTR ibmappnNnTopoInTdus | 1.3.6.1.4.1.2.6.2.13.2.1.3 | Counter | read-only | Total number of TDUs received from all adjacent NN since last initialization. |
| ibmappnNnTopology | 1.3.6.1.4.1.2.6.2.13.2.3 | |||
| ibmappnNnTopologyEntry | 1.3.6.1.4.1.2.6.2.13.2.3.1.1 | not-accessible | The fully-qualified node name is used to index this table. | |
| ibmappnNnTopologyFREntry | 1.3.6.1.4.1.2.6.2.13.2.3.3.1 | not-accessible | The fully-qualified node name is used to index this table. | |
| ibmappnNnTopologyFRTable | 1.3.6.1.4.1.2.6.2.13.2.3.3 | not-accessible | Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node. | |
| ibmappnNnTopologyTable | 1.3.6.1.4.1.2.6.2.13.2.3.1 | not-accessible | Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node. | |
| INT ibmappnNnTopoMaxNodes | 1.3.6.1.4.1.2.6.2.13.2.1.1 | INTEGER | read-only | Maximum number of nodes allowed in the APPN topology database This administratively assigned value must be equal to or greater than the maximum total number of end nodes and network nodes. If the number of nodes exceeds this value, APPN will issue an Alert and the node can no longer participate as a network node. |
| CTR ibmappnNnTopoNodeBadHighRsns | 1.3.6.1.4.1.2.6.2.13.2.1.8 | Counter | read-only | Total number of topology node updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detected by one of the APPN network nodes. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes. |
| CTR ibmappnNnTopoNodeEqualRsns | 1.3.6.1.4.1.2.6.2.13.2.1.6 | Counter | read-only | Total number of topology node updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs. |
| CTR ibmappnNnTopoNodeErrors | 1.3.6.1.4.1.2.6.2.13.2.1.10 | Counter | read-only | Total number of topology node records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a data inconsistency. This node will create a TDU with the current RSN incremented to the next odd number and broadcast it to all adjacent NNs. |
| CTR ibmappnNnTopoNodeGoodHighRsns | 1.3.6.1.4.1.2.6.2.13.2.1.7 | Counter | read-only | Total number of topology node updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes. It is not required to send a TDU to the sender of this update because that node already has the update. |
| CTR ibmappnNnTopoNodeLowRsns | 1.3.6.1.4.1.2.6.2.13.2.1.5 | Counter | read-only | Total number of topology node updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs, but this node will send a TDU with it's higher RSN to the adjacent node that sent this low RSN. |
| CTR ibmappnNnTopoNodePurges | 1.3.6.1.4.1.2.6.2.13.2.1.12 | Counter | read-only | Total number of topology node records purged from this node's topology database. This occurs when a node has not been updated in a specified amount of time. The owning node is responsible for broadcasting updates for its resource that it wants kept in the network topology. |
| CTR ibmappnNnTopoNodeStateUpdates | 1.3.6.1.4.1.2.6.2.13.2.1.9 | Counter | read-only | Total number of topology Node records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDUs to all adjacent network nodes. |
| CTR ibmappnNnTopoNodeTimerUpdates | 1.3.6.1.4.1.2.6.2.13.2.1.11 | Counter | read-only | Total number of topology node records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates insure other network nodes do not delete this node's resources from their topology database. |
| CTR ibmappnNnTopoOutTdus | 1.3.6.1.4.1.2.6.2.13.2.1.4 | Counter | read-only | Total number of TDUs built by this node to be sent to all adjacent NN since last initialization. |
| CTR ibmappnNnTopoRouteCalcs | 1.3.6.1.4.1.2.6.2.13.2.1.23.1.3 | Counter | read-only | Number of routes calculated since last initialization. |
| STR ibmappnNnTopoRouteCos | 1.3.6.1.4.1.2.6.2.13.2.1.23.1.1 | DisplayString | read-only | The Class of Service for the route. |
| ibmappnNnTopoRouteEntry | 1.3.6.1.4.1.2.6.2.13.2.1.23.1 | not-accessible | The Class of Service name is the index for this table. | |
| CTR ibmappnNnTopoRouteRejs | 1.3.6.1.4.1.2.6.2.13.2.1.23.1.4 | Counter | read-only | Number of route requests that could not be calculated since last initialization. |
| ibmappnNnTopoRouteTable | 1.3.6.1.4.1.2.6.2.13.2.1.23 | not-accessible | Table containing an entry for every Class of Service that it has calculated a route for. | |
| CTR ibmappnNnTopoRouteTrees | 1.3.6.1.4.1.2.6.2.13.2.1.23.1.2 | Counter | read-only | Number of routes tree caches built for this Class of Service since the last initialization. |
| CTR ibmappnNnTopoTgBadHighRsns | 1.3.6.1.4.1.2.6.2.13.2.1.16 | Counter | read-only | Total number of topology TG updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detected by one of the APPN network nodes. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes. |
| CTR ibmappnNnTopoTgEqualRsns | 1.3.6.1.4.1.2.6.2.13.2.1.14 | Counter | read-only | Total number of topology TG updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs. |
| CTR ibmappnNnTopoTgErrors | 1.3.6.1.4.1.2.6.2.13.2.1.18 | Counter | read-only | Total number of topology TG records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a data inconsistency. This node will create a TDU with the current RSN incremented to the next odd number and broadcast it to all adjacent NNs. |
| CTR ibmappnNnTopoTgGoodHighRsns | 1.3.6.1.4.1.2.6.2.13.2.1.15 | Counter | read-only | Total number of topology TG updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcasting the update to all adjacent network nodes. |
| CTR ibmappnNnTopoTgLowRsns | 1.3.6.1.4.1.2.6.2.13.2.1.13 | Counter | read-only | Total number of topology TG updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs, but this node will send a TDU with it's higher RSN to the sender of the low RSN. |
| CTR ibmappnNnTopoTgPurges | 1.3.6.1.4.1.2.6.2.13.2.1.20 | Counter | read-only | Total number of topology TG records purged from this node's topology database. This occurs when a TG has not been updated in a specified amount of time. The owning node is responsible for broadcasting updates for its resource that it wants to keep in the network topology. |
| CTR ibmappnNnTopoTgStateUpdates | 1.3.6.1.4.1.2.6.2.13.2.1.17 | Counter | read-only | Total number of topology TG records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDUs to all adjacent network nodes. |
| CTR ibmappnNnTopoTgTimerUpdates | 1.3.6.1.4.1.2.6.2.13.2.1.19 | Counter | read-only | Total number of topology TG records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates insure other network nodes do not delete this node's resources from their topology database. |
| CTR ibmappnNnTopoTotalRouteCalcs | 1.3.6.1.4.1.2.6.2.13.2.1.21 | Counter | read-only | Number of routes calculated for all class of services since the last initialization. |
| CTR ibmappnNnTopoTotalRouteRejs | 1.3.6.1.4.1.2.6.2.13.2.1.22 | Counter | read-only | Number of route requests for all class of services that could not be calculated since last initialization. |
| ibmappnNnUniqueInfoAndCaps | 1.3.6.1.4.1.2.6.2.13.1.2 | |||
| ibmappnNode | 1.3.6.1.4.1.2.6.2.13.1 | |||
| INT ibmappnNodeAdaptiveBindPacing | 1.3.6.1.4.1.2.6.2.13.1.1.12 | INTEGER | read-only | Indicates whether this node supports adaptive bind pacing. |
| INT ibmappnNodeBindReasm | 1.3.6.1.4.1.2.6.2.13.1.1.9 | INTEGER | read-only | Indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported. |
| STR ibmappnNodeBlockNum | 1.3.6.1.4.1.2.6.2.13.1.1.3 | DisplayString | read-only | The block number is the first three digits of the node_id. These 3 hexadecimal digits identify the product and are not configurable. |
| STR ibmappnNodeCpName | 1.3.6.1.4.1.2.6.2.13.1.1.1 | DisplayString | read-only | Administratively-assigned network name for this node in the format NETID.CPNAME. |
| CTR ibmappnNodeDefLsBadXids | 1.3.6.1.4.1.2.6.2.13.1.8.2 | Counter | read-only | The current number of unsuccessfull XIDs that have occurred on all defined link stations since the last time this node was initialized. |
| CTR ibmappnNodeDefLsGoodXids | 1.3.6.1.4.1.2.6.2.13.1.8.1 | Counter | read-only | The current number of successfull XIDs that have occurred on all defined link stations since the last time this node was initialized. |
| CTR ibmappnNodeDynLsBadXids | 1.3.6.1.4.1.2.6.2.13.1.8.4 | Counter | read-only | The current number of unsuccessfull XIDs that have occurred on all dynamic link stations since the last time this node was initialized. |
| CTR ibmappnNodeDynLsGoodXids | 1.3.6.1.4.1.2.6.2.13.1.8.3 | Counter | read-only | The current number of successfull XIDs that have occurred on all dynamic link stations since the last time this node was initialized. |
| INT ibmappnNodeEnLocateCdinit | 1.3.6.1.4.1.2.6.2.13.1.3.3 | INTEGER | read-only | Indicates whether this end node supports Locate Cdinit. |
| INT ibmappnNodeEnModeCosMap | 1.3.6.1.4.1.2.6.2.13.1.3.2 | INTEGER | read-only | Indicates whether this end node supports mode name to COS name mapping. |
| INT ibmappnNodeEnSegGen | 1.3.6.1.4.1.2.6.2.13.1.3.1 | INTEGER | read-only | Indicates whether this end node supports segment generation. |
| INT ibmappnNodeEnSendRegChar | 1.3.6.1.4.1.2.6.2.13.1.3.5 | INTEGER | read-only | Indicates whether this node supports send register characteristics, which is only supported when send registered names is also supported. |
| INT ibmappnNodeEnSendRegNames | 1.3.6.1.4.1.2.6.2.13.1.3.4 | INTEGER | read-only | Indicates whether the node will register its LUs with the adjacent serving network node: NO - do not register names YES - register names |
| STR ibmappnNodeIdNum | 1.3.6.1.4.1.2.6.2.13.1.1.4 | DisplayString | read-only | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area. |
| TIK ibmappnNodeLsActiveTime | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.41 | TimeTicks | read-only | The time (in hundredth of seconds) this link station has been in the active state. A zero value indicates the link station has never been active. |
| CTR ibmappnNodeLsBadXids | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.37 | Counter | read-only | The total number of unsuccessful XIDs that have occurred on this link station since the time it was started. |
| STR ibmappnNodeLsBlockNum | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.10 | DisplayString | read-only | The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable. |
| INT ibmappnNodeLsByteCost | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.17 | INTEGER | read-only | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG using this link station. |
| INT ibmappnNodeLsConnCost | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.16 | INTEGER | read-only | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with the TG using this link station. |
| INT ibmappnNodeLsCpCpSession | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.12 | INTEGER | read-only | Indicates whether CP-CP sessions are supported by this link station. |
| STR ibmappnNodeLsCpName | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.6 | DisplayString | read-only | Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname. |
| INT ibmappnNodeLsCurrentDelay | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.32 | INTEGER | read-only | The time that it took for the last test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds. |
| TIK ibmappnNodeLsCurrentStateTime | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.42 | TimeTicks | read-only | The time (in hundredth of seconds) the link station is in the current state. |
| INT ibmappnNodeLsDelay | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.19 | INTEGER | read-only | Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assigned value associated with the TG using this link station. |
| INT ibmappnNodeLsDlcType | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.3 | INTEGER | read-only | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| ibmappnNodeLsDlsEntry | 1.3.6.1.4.1.2.6.2.13.1.5.3.1 | not-accessible | The DLS Name is used as the index to this table. | |
| STR ibmappnNodeLsDlsName | 1.3.6.1.4.1.2.6.2.13.1.5.3.1.1 | DisplayString | read-only | Administratively-assigned name for this link station. The name can be from one to eight characters. |
| INT ibmappnNodeLsDlsState | 1.3.6.1.4.1.2.6.2.13.1.5.3.1.2 | INTEGER | read-only | State of this link station. |
| ibmappnNodeLsDlsTable | 1.3.6.1.4.1.2.6.2.13.1.5.3 | not-accessible | Ls Table (DLS specific). | |
| INT ibmappnNodeLsDynamic | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.4 | INTEGER | read-only | Identifies whether this resource is a dynamic link station. Dynamic link stations are created when adjacent nodes that have not been locally defined establish a connection with this node. |
| CTR ibmappnNodeLsEchoRsps | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.31 | Counter | read-only | Number of responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adjacent nodes periodically to verify connectivity and to measure that actual round trip time, that is the time the test frame is sent until the response is received. |
| INT ibmappnNodeLsEffCap | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.15 | INTEGER | read-only | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigned value associated with the TG using this link station. |
| ibmappnNodeLsEntry | 1.3.6.1.4.1.2.6.2.13.1.5.1.1 | not-accessible | This table is indexed by the link station name. | |
| CTR ibmappnNodeLsGoodXids | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.36 | Counter | read-only | The total number of successful XIDs that have occurred on this link station since the time it was started. |
| STR ibmappnNodeLsIdNum | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.11 | DisplayString | read-only | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area. |
| CTR ibmappnNodeLsInMsgBytes | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.24 | Counter | read-only | Number of message (I-frame) bytes received. |
| CTR ibmappnNodeLsInMsgFrames | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.26 | Counter | read-only | Number of message (I-frame) frames received. |
| CTR ibmappnNodeLsInXidBytes | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.23 | Counter | read-only | Number of XID bytes received. |
| CTR ibmappnNodeLsInXidFrames | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.25 | Counter | read-only | Number of XID frames received. |
| ibmappnNodeLsIpEntry | 1.3.6.1.4.1.2.6.2.13.1.5.2.1 | not-accessible | The IP Name is used as the index to this table. | |
| STR ibmappnNodeLsIpName | 1.3.6.1.4.1.2.6.2.13.1.5.2.1.1 | DisplayString | read-only | Administratively-assigned name for this link station. The name can be from one to eight characters. |
| INT ibmappnNodeLsIpState | 1.3.6.1.4.1.2.6.2.13.1.5.2.1.2 | INTEGER | read-only | State of this link station. |
| ibmappnNodeLsIpTable | 1.3.6.1.4.1.2.6.2.13.1.5.2 | not-accessible | Link station table (TCP/IP specific). | |
| INT ibmappnNodeLsLimResource | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.8 | INTEGER | read-only | Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions. |
| OCT ibmappnNodeLsLocalDlsMac | 1.3.6.1.4.1.2.6.2.13.1.5.3.1.3 | OCTET STRING | read-only | Local MAC address. |
| OCT ibmappnNodeLsLocalDlsSap | 1.3.6.1.4.1.2.6.2.13.1.5.3.1.4 | OCTET STRING | read-only | Local SAP address. |
| IP ibmappnNodeLsLocalIpAddr | 1.3.6.1.4.1.2.6.2.13.1.5.2.1.3 | IpAddress | read-only | Local IP address. |
| INT ibmappnNodeLsLocalIpPortNum | 1.3.6.1.4.1.2.6.2.13.1.5.2.1.4 | INTEGER | read-only | Local TCP/IP port number. The default listening port will be administratively assigned and will dynamically change if this node initiates a session with adjacent node. |
| OCT ibmappnNodeLsLocalTrMac | 1.3.6.1.4.1.2.6.2.13.1.5.4.1.3 | OCTET STRING | read-only | Local MAC address. |
| OCT ibmappnNodeLsLocalTrSap | 1.3.6.1.4.1.2.6.2.13.1.5.4.1.4 | OCTET STRING | read-only | Local SAP address. |
| INT ibmappnNodeLsMaxDelay | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.33 | INTEGER | read-only | The longest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds . |
| TIK ibmappnNodeLsMaxDelayTime | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.35 | TimeTicks | read-only | The time (since system up in hundredth of seconds) when the longest delay occurred. This time can be used to identify when this high water mark occurred in relation to the last initialization of the APPN node. |
| INT ibmappnNodeLsMaxSendBtuSize | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.14 | INTEGER | read-only | Numeric value between 0 and 32767 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an administratively assigned value. |
| INT ibmappnNodeLsMigration | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.9 | INTEGER | read-only | Indicates whether this link station will be used for connections to down-level or migration partners. |
| INT ibmappnNodeLsMinDelay | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.34 | INTEGER | read-only | The shortest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds. |
| STR ibmappnNodeLsName | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.1 | DisplayString | read-only | Administratively-assigned name for the link station. The name can be from one to eight characters. |
| CTR ibmappnNodeLsOutMsgBytes | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.28 | Counter | read-only | Number of message (I-frame) bytes sent. |
| CTR ibmappnNodeLsOutMsgFrames | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.30 | Counter | read-only | Number of message (I-frame) frames sent. |
| CTR ibmappnNodeLsOutXidBytes | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.27 | Counter | read-only | Number of XID bytes sent. |
| CTR ibmappnNodeLsOutXidFrames | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.29 | Counter | read-only | Number of XID frames sent. |
| STR ibmappnNodeLsPortName | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.2 | DisplayString | read-only | Administratively-assigned name for the port. The name can be from one to eight characters. |
| OCT ibmappnNodeLsRemoteDlsMac | 1.3.6.1.4.1.2.6.2.13.1.5.3.1.5 | OCTET STRING | read-only | Remote MAC address. |
| OCT ibmappnNodeLsRemoteDlsSap | 1.3.6.1.4.1.2.6.2.13.1.5.3.1.6 | OCTET STRING | read-only | Remote SAP address. |
| IP ibmappnNodeLsRemoteIpAddr | 1.3.6.1.4.1.2.6.2.13.1.5.2.1.5 | IpAddress | read-only | Remote IP address. |
| INT ibmappnNodeLsRemoteIpPortNum | 1.3.6.1.4.1.2.6.2.13.1.5.2.1.6 | INTEGER | read-only | Remote TCP/IP port number. |
| OCT ibmappnNodeLsRemoteTrMac | 1.3.6.1.4.1.2.6.2.13.1.5.4.1.5 | OCTET STRING | read-only | Remote MAC address. |
| OCT ibmappnNodeLsRemoteTrSap | 1.3.6.1.4.1.2.6.2.13.1.5.4.1.6 | OCTET STRING | read-only | Remote SAP address. |
| INT ibmappnNodeLsSecurity | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.18 | INTEGER | read-only | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with the TG using this link station. |
| OID ibmappnNodeLsSpecific | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.38 | OBJECT IDENTIFIER | read-only | Identifies the DLC specific OBJECT IDENTIFIER that can provide additional information. |
| TIK ibmappnNodeLsStartTime | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.40 | TimeTicks | read-only | The time (in hundredth of seconds) this link station has been active the last time since the time APPN was initialized. |
| INT ibmappnNodeLsState | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.5 | INTEGER | read-write | State of this link station. |
| STR ibmappnNodeLsStatusCpName | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.4 | DisplayString | read-only | Administratively-assigned fully-qualified name of the adjacent node partner. This will be provided when the adjacent node has been defined at this node or when the XID sequence has proceeded far enough to to identify the adjacent node. A blank CP name will indicate the name is unknown. |
| INT ibmappnNodeLsStatusDlcType | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.14 | INTEGER | read-only | This identifies DLC type that was being used when error occurred. This also is used to the format of the local and remote address provided. other = free form DisplayString ip = ld.ld.ld.ld/2d tr = lx:lx:lx:lx:lx:lx.lx dlsw = lx:lx:lx:lx:lx:lx.lx ethernet = lx:lx:lx:lx:lx:lx.lx |
| OCT ibmappnNodeLsStatusEndSense | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.9 | OCTET STRING | read-only | The sense code associated with the termination of the link connection to adjacent node. This includes all sense information included in the disconnect recieved from the lower layer DLCs and also sense information indicating the link termination originated by upper layer APPN components. |
| ibmappnNodeLsStatusEntry | 1.3.6.1.4.1.2.6.2.13.1.5.5.1 | not-accessible | This table is indexed by the LsStatusIndex, which is an integer that is continuously updated until it eventually wraps. This provides the management station the ability to retrieve only the updates to the table by using the standard GET NEXT. | |
| OCT ibmappnNodeLsStatusGeneralSense | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.7 | OCTET STRING | read-only | The error sense code associated with the start sequence of activation of a link up to the beginning of the XID sequence. |
| INT ibmappnNodeLsStatusIndex | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.1 | INTEGER | read-only | Table index. The value of the index begins at zero and is incremented up to a maximum value of 2**31-1 (2,147,483,647) before wrapping. |
| STR ibmappnNodeLsStatusLocalAddr | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.15 | DisplayString | read-only | This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format. |
| STR ibmappnNodeLsStatusLsName | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.3 | DisplayString | read-only | Administratively-assigned name for this link station. |
| OCT ibmappnNodeLsStatusNodeId | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.5 | OCTET STRING | read-only | Adjacent Node id |
| INT ibmappnNodeLsStatusNofRetry | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.8 | INTEGER | read-only | Indicates whether NOF will retry the start request to activate the link. |
| STR ibmappnNodeLsStatusRemoteAddr | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.16 | DisplayString | read-only | This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format. |
| ibmappnNodeLsStatusTable | 1.3.6.1.4.1.2.6.2.13.1.5.5 | not-accessible | This table contains information related to exceptional and potential exceptional conditions that occur during the activation, XID exchange, and termination of the connection. | |
| INT ibmappnNodeLsStatusTgNum | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.6 | INTEGER | read-only | Number associated with the TG to this link station with a range from 0 to 256. A value of 256 indicates the tg number has not been negotiated and is unknown at this time. |
| TIK ibmappnNodeLsStatusTime | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.2 | TimeTicks | read-only | Time (in hundreds of a second) since this node was last initialized. |
| INT ibmappnNodeLsStatusXidBitInError | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.13 | INTEGER | read-only | This identifies the actual bit within the error byte of the XID. This only has meaning when the byte in error is greater than zero. |
| INT ibmappnNodeLsStatusXidByteInError | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.12 | INTEGER | read-only | This identifies the actual byte in the XID that caused the error. The value of zero (0) indicates that the variable has no meaning. |
| OCT ibmappnNodeLsStatusXidLocalSense | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.10 | OCTET STRING | read-only | The error sense code associated with the rejection of the XID. |
| OCT ibmappnNodeLsStatusXidRemoteSense | 1.3.6.1.4.1.2.6.2.13.1.5.5.1.11 | OCTET STRING | read-only | The error sense code adjacent node returned to this node indicating the reason the XID was rejected. |
| INT ibmappnNodeLsSubState | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.39 | INTEGER | read-only | State of this link station. |
| ibmappnNodeLsTable | 1.3.6.1.4.1.2.6.2.13.1.5.1 | not-accessible | This table contains detail information about the link station configuration and current status. | |
| INT ibmappnNodeLsTargetPacingCount | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.13 | INTEGER | read-only | Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind pacing is being performed. |
| INT ibmappnNodeLsTgNum | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.7 | INTEGER | read-only | Number associated with the TG to this link station. |
| ibmappnNodeLsTrEntry | 1.3.6.1.4.1.2.6.2.13.1.5.4.1 | not-accessible | The TR Name is used as the index to this table. | |
| STR ibmappnNodeLsTrName | 1.3.6.1.4.1.2.6.2.13.1.5.4.1.1 | DisplayString | read-only | Administratively-assigned name for this link station. The name can be from one to eight characters. |
| INT ibmappnNodeLsTrState | 1.3.6.1.4.1.2.6.2.13.1.5.4.1.2 | INTEGER | read-only | State of this link station. |
| ibmappnNodeLsTrTable | 1.3.6.1.4.1.2.6.2.13.1.5.4 | not-accessible | Ls Table (Token Ring specific). | |
| INT ibmappnNodeLsUsr1 | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.20 | INTEGER | read-only | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station. |
| INT ibmappnNodeLsUsr2 | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.21 | INTEGER | read-only | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station. |
| INT ibmappnNodeLsUsr3 | 1.3.6.1.4.1.2.6.2.13.1.5.1.1.22 | INTEGER | read-only | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station. |
| INT ibmappnNodeNegotLs | 1.3.6.1.4.1.2.6.2.13.1.1.7 | INTEGER | read-only | Indicates whether this node supports negotiable link stations. |
| STR ibmappnNodeNetid | 1.3.6.1.4.1.2.6.2.13.1.1.2 | DisplayString | read-only | Administratively-assigned APPN network identification, which can be from one to eight characters. This ID is used with the control point name to create a fully-qualified control point name. |
| INT ibmappnNodeNnCentralDirectory | 1.3.6.1.4.1.2.6.2.13.1.2.3 | INTEGER | read-only | Indicates whether this node supports central directory cache. |
| INT ibmappnNodeNnFrsn | 1.3.6.1.4.1.2.6.2.13.1.2.8 | INTEGER | read-only | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update to adjacent network nodes. |
| INT ibmappnNodeNnGateway | 1.3.6.1.4.1.2.6.2.13.1.2.2 | INTEGER | read-only | Indicates whether this is a gateway node. |
| INT ibmappnNodeNnIsr | 1.3.6.1.4.1.2.6.2.13.1.2.7 | INTEGER | read-only | Indicates whether the node supports intermediate session routing. |
| INT ibmappnNodeNnRcvRegChar | 1.3.6.1.4.1.2.6.2.13.1.2.1 | INTEGER | read-only | Indicates whether this node supports receiving registered characteristics. |
| INT ibmappnNodeNnRouteAddResist | 1.3.6.1.4.1.2.6.2.13.1.2.6 | INTEGER | read-only | Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing. |
| INT ibmappnNodeNnTreeCache | 1.3.6.1.4.1.2.6.2.13.1.2.4 | INTEGER | read-only | Indicates whether this node supports route tree cache. |
| INT ibmappnNodeNnTreeUpdate | 1.3.6.1.4.1.2.6.2.13.1.2.5 | INTEGER | read-only | Indicates whether this node supports incremental_tree_update, which is only supported when tree caching is supported. |
| INT ibmappnNodeParallelTg | 1.3.6.1.4.1.2.6.2.13.1.1.10 | INTEGER | read-only | Indicates whether this node supports parallel TGs. |
| CTR ibmappnNodePortDefLsBadXids | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.10 | Counter | read-only | The total number of unsuccessfull XIDs that have occurred on all defined link stations on this port since the last time this port was started. |
| CTR ibmappnNodePortDefLsGoodXids | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.9 | Counter | read-only | The total number of successfull XIDs that have occurred on all defined link stations on this port since the last time this port was started. |
| INT ibmappnNodePortDlcTracCmdType | 1.3.6.1.4.1.2.6.2.13.1.4.5.1.7 | INTEGER | read-only | Indicates the command type of the trace entry. |
| INT ibmappnNodePortDlcTracDlcType | 1.3.6.1.4.1.2.6.2.13.1.4.5.1.3 | INTEGER | read-only | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| ibmappnNodePortDlcTraceEntry | 1.3.6.1.4.1.2.6.2.13.1.4.5.1 | not-accessible | The Port name and a dynamic integer are the index to this table. | |
| ibmappnNodePortDlcTraceTable | 1.3.6.1.4.1.2.6.2.13.1.4.5 | not-accessible | Port table generic DLC trace table. | |
| INT ibmappnNodePortDlcTracIndex | 1.3.6.1.4.1.2.6.2.13.1.4.5.1.2 | INTEGER | read-only | This index value is updated every time a new trace entry is created which provides a means to retrieve only the updated entries and also provides a simple method of correlating the entries. The table will wrap when the table is full, which will result in previous entries being written over. The mangement station can over come this by retrieving the table using this index to retrieve only the new table entries. |
| STR ibmappnNodePortDlcTracLocalAddr | 1.3.6.1.4.1.2.6.2.13.1.4.5.1.4 | DisplayString | read-only | Local address in format described below: other = free form DisplayString ip = ld.ld.ld.ld/2d tr = lx:lx:lx:lx:lx:lx.lx dlsw = lx:lx:lx:lx:lx:lx.lx ethernet = lx:lx:lx:lx:lx:lx.lx |
| INT ibmappnNodePortDlcTracMsgType | 1.3.6.1.4.1.2.6.2.13.1.4.5.1.6 | INTEGER | read-only | Indicates the type of trace record entry |
| STR ibmappnNodePortDlcTracPortName | 1.3.6.1.4.1.2.6.2.13.1.4.5.1.1 | DisplayString | read-only | The Port name associated with this this trace table entry. |
| STR ibmappnNodePortDlcTracRemoteAddr | 1.3.6.1.4.1.2.6.2.13.1.4.5.1.5 | DisplayString | read-only | Remote Address in the format described below: other = free form DisplayString ip = ld.ld.ld.ld/2d tr = lx:lx:lx:lx:lx:lx.lx dlsw = lx:lx:lx:lx:lx:lx.lx ethernet = lx:lx:lx:lx:lx:lx.lx |
| INT ibmappnNodePortDlcTracUseWan | 1.3.6.1.4.1.2.6.2.13.1.4.5.1.8 | INTEGER | read-only | |
| INT ibmappnNodePortDlcType | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.3 | INTEGER | read-only | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| ibmappnNodePortDlsEntry | 1.3.6.1.4.1.2.6.2.13.1.4.3.1 | not-accessible | The DLS Name is used as the index to this table. | |
| OCT ibmappnNodePortDlsMac | 1.3.6.1.4.1.2.6.2.13.1.4.3.1.2 | OCTET STRING | read-only | Local DLS MAC address. |
| STR ibmappnNodePortDlsName | 1.3.6.1.4.1.2.6.2.13.1.4.3.1.1 | DisplayString | read-only | Administratively-assigned name for this APPN DLS port. The name can be from one to eight characters. |
| OCT ibmappnNodePortDlsSap | 1.3.6.1.4.1.2.6.2.13.1.4.3.1.3 | OCTET STRING | read-only | Local DLS Sap address. |
| ibmappnNodePortDlsTable | 1.3.6.1.4.1.2.6.2.13.1.4.3 | not-accessible | Port table (DLS specific). | |
| CTR ibmappnNodePortDynLsBadXids | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.12 | Counter | read-only | The total number of unsuccessfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started. |
| CTR ibmappnNodePortDynLsGoodXids | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.11 | Counter | read-only | The total number of successfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started. |
| ibmappnNodePortEntry | 1.3.6.1.4.1.2.6.2.13.1.4.1.1 | not-accessible | The Port Name is used as the index to this table. | |
| ibmappnNodePortIpEntry | 1.3.6.1.4.1.2.6.2.13.1.4.2.1 | not-accessible | The IP Name is used as the index to this table. | |
| STR ibmappnNodePortIpName | 1.3.6.1.4.1.2.6.2.13.1.4.2.1.1 | DisplayString | read-only | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| INT ibmappnNodePortIpPortNum | 1.3.6.1.4.1.2.6.2.13.1.4.2.1.2 | INTEGER | read-only | Local TCP/IP port number. |
| ibmappnNodePortIpTable | 1.3.6.1.4.1.2.6.2.13.1.4.2 | not-accessible | Port table (TCP/IP specific). | |
| INT ibmappnNodePortLsRole | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.6 | INTEGER | read-only | Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode. |
| INT ibmappnNodePortMaxIframeWindow | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.8 | INTEGER | read-only | Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received. |
| INT ibmappnNodePortMaxRcvBtuSize | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.7 | INTEGER | read-only | Maximum Basic Transmission Size (BTU) that a link station on this port can receive. |
| STR ibmappnNodePortName | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.1 | DisplayString | read-only | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| INT ibmappnNodePortPortType | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.4 | INTEGER | read-only | Identifies the type of line used by this port. |
| INT ibmappnNodePortSIMRIM | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.5 | INTEGER | read-only | Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported. |
| OID ibmappnNodePortSpecific | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.13 | OBJECT IDENTIFIER | read-only | Identifies the port specific OBJECT IDENTIFIER that can provide additional information. |
| INT ibmappnNodePortState | 1.3.6.1.4.1.2.6.2.13.1.4.1.1.2 | INTEGER | read-write | Indicates the current state of this port. |
| ibmappnNodePortTable | 1.3.6.1.4.1.2.6.2.13.1.4.1 | not-accessible | The Port table describes the configuration and current status of the ports used by APPN. The type of DLC is included in this table as a pointer to the DLC port specific tables. | |
| ibmappnNodePortTrEntry | 1.3.6.1.4.1.2.6.2.13.1.4.4.1 | not-accessible | The TR Name is used as the index to this table. | |
| OCT ibmappnNodePortTrMac | 1.3.6.1.4.1.2.6.2.13.1.4.4.1.2 | OCTET STRING | read-only | Local Token Ring MAC address. |
| STR ibmappnNodePortTrName | 1.3.6.1.4.1.2.6.2.13.1.4.4.1.1 | DisplayString | read-only | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| OCT ibmappnNodePortTrSap | 1.3.6.1.4.1.2.6.2.13.1.4.4.1.3 | OCTET STRING | read-only | Local Token Ring Sap address. |
| ibmappnNodePortTrTable | 1.3.6.1.4.1.2.6.2.13.1.4.4 | not-accessible | Port table (Token Ring specific). | |
| INT ibmappnNodeSegReasm | 1.3.6.1.4.1.2.6.2.13.1.1.8 | INTEGER | read-only | Indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported. |
| INT ibmappnNodeService | 1.3.6.1.4.1.2.6.2.13.1.1.11 | INTEGER | read-only | Indicates whether this node allows call-in from nodes not defined locally. |
| INT ibmappnNodeType | 1.3.6.1.4.1.2.6.2.13.1.1.5 | INTEGER | read-only | Type of APPN node, either network, len, or end node. |
| TIK ibmappnNodeUpTime | 1.3.6.1.4.1.2.6.2.13.1.1.6 | TimeTicks | read-only | Time (in hundredths of a second) since this APPN node was initialized. |
| ibmappnPortInformation | 1.3.6.1.4.1.2.6.2.13.1.4 | |||
| ibmappnSessEndPoint | 1.3.6.1.4.1.2.6.2.13.7.2 | |||
| ibmappnSessGeneral | 1.3.6.1.4.1.2.6.2.13.7.1 | |||
| ibmappnSessIntermediate | 1.3.6.1.4.1.2.6.2.13.7.3 | |||
| ibmappnSession | 1.3.6.1.4.1.2.6.2.13.7 | |||
| ibmappnSnmpInformation | 1.3.6.1.4.1.2.6.2.13.1.6 | |||
| CTR ibmappnSnmpInGetNexts | 1.3.6.1.4.1.2.6.2.13.1.6.3 | Counter | read-only | Total number of GETNEXT requests delivered to the APPN SNMP sub-agent. |
| CTR ibmappnSnmpInGetNextVars | 1.3.6.1.4.1.2.6.2.13.1.6.7 | Counter | read-only | Total number of VARIABLES included in all GETNEXT requests to the APPN SNMP sub-agent. |
| CTR ibmappnSnmpInGetRequests | 1.3.6.1.4.1.2.6.2.13.1.6.2 | Counter | read-only | Total number of GET requests delivered to the APPN SNMP sub-agent. |
| CTR ibmappnSnmpInGetVars | 1.3.6.1.4.1.2.6.2.13.1.6.6 | Counter | read-only | Total number of VARIBLES included in all GET requests to the APPN SNMP sub-agent. |
| CTR ibmappnSnmpInPkts | 1.3.6.1.4.1.2.6.2.13.1.6.1 | Counter | read-only | Total number of messages delivered to the APPN SNMP sub-agent. |
| CTR ibmappnSnmpInSetRequests | 1.3.6.1.4.1.2.6.2.13.1.6.4 | Counter | read-only | Total number of SET requests delivered to the APPN SNMP sub-agent. |
| CTR ibmappnSnmpInSetVars | 1.3.6.1.4.1.2.6.2.13.1.6.8 | Counter | read-only | Total number of VARIBLES included in all SET requests to the APPN SNMP sub-agent. |
| CTR ibmappnSnmpInTotalVars | 1.3.6.1.4.1.2.6.2.13.1.6.5 | Counter | read-only | Total number of VARIABLES included in both GET and GETNEXT requests to the APPN SNMP sub-agent. |
| CTR ibmappnSnmpOutGenErrs | 1.3.6.1.4.1.2.6.2.13.1.6.10 | Counter | read-only | Total number of undefined errors that occurred processing SNMP request to the APPN SNMP sub-agent. |
| CTR ibmappnSnmpOutNoSuchNames | 1.3.6.1.4.1.2.6.2.13.1.6.9 | Counter | read-only | Total number of VARIABLES that could not be found by the APPN SNMP sub-agent. |
| ibmappnXidInformation | 1.3.6.1.4.1.2.6.2.13.1.8 | |||
| ibmatportFilter | 1.3.6.1.4.1.2.6.2.16.3 | |||
| ibmatportFilterEntry | 1.3.6.1.4.1.2.6.2.16.3.1.1 | not-accessible | The description of a filter on this Appletalk port. | |
| INT ibmatportFilterIndex | 1.3.6.1.4.1.2.6.2.16.3.1.1.1 | INTEGER | read-only | An identifier that is unique to the Appletalk port to which this filter applies. The port identified by this value is the same port as identified by atportIndex. |
| OCT ibmatportFilterNetEnd | 1.3.6.1.4.1.2.6.2.16.3.1.1.3 | OCTET STRING | read-only | The network address that ends the range for this destination network filter. This address is a two octet DDP network address in network byte order. |
| OCT ibmatportFilterNetStart | 1.3.6.1.4.1.2.6.2.16.3.1.1.2 | OCTET STRING | read-only | The network address that starts the range for this destination network filter. This address is a two octet DDP network address in network byte order. |
| ibmatportFilterTable | 1.3.6.1.4.1.2.6.2.16.3.1 | not-accessible | The list of Appletalk port destination network filter entries. | |
| ibmbridge | 1.3.6.1.4.1.2.6.2.7 | |||
| ibmbridgeFiltOrderTable | 1.3.6.1.4.1.2.6.2.7.7 | |||
| ibmbridgeHopCountFilters | 1.3.6.1.4.1.2.6.2.7.5 | |||
| ibmbridgeMACAddressFilters | 1.3.6.1.4.1.2.6.2.7.1 | |||
| ibmbridgeRIFFilters | 1.3.6.1.4.1.2.6.2.7.8 | |||
| ibmbridgeRingFilters | 1.3.6.1.4.1.2.6.2.7.4 | |||
| ibmbridgeSAPFilters | 1.3.6.1.4.1.2.6.2.7.2 | |||
| ibmbridgeSNAPFilters | 1.3.6.1.4.1.2.6.2.7.3 | |||
| ibmbridgeWindowFilters | 1.3.6.1.4.1.2.6.2.7.6 | |||
| ibmChipSetIBM | 1.3.6.1.4.1.2.6.2.2.2 | |||
| ibmChipSetIBM8025A | 1.3.6.1.4.1.2.6.2.2.2.1 | |||
| ibmChipSetIBM8025B | 1.3.6.1.4.1.2.6.2.2.2.2 | |||
| ibmChipSetIntel | 1.3.6.1.4.1.2.6.2.2.1 | |||
| ibmChipSetIntel82596B | 1.3.6.1.4.1.2.6.2.2.1.1 | |||
| ibmChipSets | 1.3.6.1.4.1.2.6.2.2 | |||
| ibmChipSetSignetics | 1.3.6.1.4.1.2.6.2.2.3 | |||
| ibmChipSetSigneticsSCN68562 | 1.3.6.1.4.1.2.6.2.2.3.1 | |||
| ibmdec | 1.3.6.1.4.1.2.6.2.17 | |||
| OCT ibmdecAllEndNodesFuncAddr | 1.3.6.1.4.1.2.6.2.17.2 | OCTET STRING | read-only | The functional address used in communicating with with all DECnet Phase IV and DECnet Phase IV-Prime end nodes on a token ring LAN. |
| OCT ibmdecAllRoutersFuncAddr | 1.3.6.1.4.1.2.6.2.17.1 | OCTET STRING | read-only | The functional address used in communicating with with all DECnet Phase IV and DECnet Phase IV-Prime routers on a token ring LAN. |
| INT ibmdecLANCircuitAddrType | 1.3.6.1.4.1.2.6.2.17.5.1.4 | INTEGER | read-only | This parameter indicates the type of MAC address used on this circuit. The value returned is decnet(1), if a DECnet Phase_IV compliant locally administered MAC address is being used. The value returned is hardware(2), if the unique assigned ROM address is used. The value returned is user(3), if a non DECnet Phase_IV compliant locally administered MAC address is being used. |
| ibmdecLANCircuitEntry | 1.3.6.1.4.1.2.6.2.17.5.1 | not-accessible | Table entry with information relevant to LAN circuits. | |
| INT ibmdecLANCircuitIndex | 1.3.6.1.4.1.2.6.2.17.5.1.1 | INTEGER | read-only | A unique index value for each known circuit on a LAN interface. The value of this variable is the same as that provided by phivCircuitIndex. |
| INT ibmdecLANCircuitSourceRoute | 1.3.6.1.4.1.2.6.2.17.5.1.3 | INTEGER | read-only | This parameter indicates if source routing is enabled on a token-ring circuit. A value of 3 is returned for circuits which are not of the 802.5/token-ring type. |
| ibmdecLANCircuitTable | 1.3.6.1.4.1.2.6.2.17.5 | not-accessible | The list of information relevant to LAN circuits. This table extends the information provided by the phivCircuitParametersTable defined by RFC 1289. | |
| INT ibmdecLANCircuitType | 1.3.6.1.4.1.2.6.2.17.5.1.2 | INTEGER | read-only | If the CircuitType is Bilingual for a circuit, the router would use a Phase_IV compliant locally administered MAC address for that circuit and would be configured to communicate with Phase_IV and Phase_IV-Prime nodes over that circuit. A bilingual router can help communication between the Phase_IV and the Phase_IV-Prime nodes over the same extended LAN segment, and prevents a partitioned network. If the CircuitType is AMA ( Arbitrary MAC Address ) for a circuit, the router would use an arbitrary MAC address for that circuit, and would be configured to communicate with Phase_IV-Prime nodes over that circuit. If the CircuitType is PhaseIV for a circuit, the router would use the Phase_IV compliant locally administered MAC address for that circuit, and would be configured to communicate with Phase_IV nodes over that circuit. |
| INT ibmdecNodeType | 1.3.6.1.4.1.2.6.2.17.4 | INTEGER | read-only | This parameter indicates the node type of the router. This object is the same as the phivRouteType object defined by RFC 1289, however, this definition extends the enumerations to provide new values. |
| INT ibmdecSplitHorPoisonRev | 1.3.6.1.4.1.2.6.2.17.3 | INTEGER | read-only | Defines whether the Split Horizon with Poison Reverse option is enabled or not |
| ibmdls | 1.3.6.1.4.1.2.6.2.9 | |||
| OCT ibmdlsCirDestAddress | 1.3.6.1.4.1.2.6.2.9.12.1.4 | OCTET STRING | read-only | The MAC address of the destination of this circuit. |
| INT ibmdlsCirDestSap | 1.3.6.1.4.1.2.6.2.9.12.1.5 | INTEGER | read-only | The SAP identifier of the destination of this circuit. |
| ibmdlsCirEntry | 1.3.6.1.4.1.2.6.2.9.12.1 | not-accessible | Information on a DLS circuit. | |
| INT ibmdlsCirIfIndex | 1.3.6.1.4.1.2.6.2.9.12.1.1 | INTEGER | read-only | The value of IfIndex for the interface supporting this circuit. |
| INT ibmdlsCirLocalAddress | 1.3.6.1.4.1.2.6.2.9.12.1.24 | INTEGER | read-only | The address (ibmdlsCirSrcAddress or ibmdlsCirDestAddress) that is local on this circuit. |
| INT ibmdlsCirLocalConnectionState | 1.3.6.1.4.1.2.6.2.9.12.1.25 | INTEGER | read-only | The state of the DLSw circuit connection based upon the progression of events as a logical link station and its associated DLSw connection is brought up or down. |
| CTR ibmdlsCirLocalLinkAdpRcvErr | 1.3.6.1.4.1.2.6.2.9.12.1.18 | Counter | read-only | The number of data-detected receive errors by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkAdpSendErr | 1.3.6.1.4.1.2.6.2.9.12.1.19 | Counter | read-only | The number of data-detected transmit errors by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkCmdContRepolls | 1.3.6.1.4.1.2.6.2.9.12.1.23 | Counter | read-only | The number of continuous repolls sent by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkCmdPollsSent | 1.3.6.1.4.1.2.6.2.9.12.1.21 | Counter | read-only | The number of command polls sent by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkCmdRepollsSent | 1.3.6.1.4.1.2.6.2.9.12.1.22 | Counter | read-only | The number of command repolls sent by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkDataPktRcv | 1.3.6.1.4.1.2.6.2.9.12.1.16 | Counter | read-only | The number of sequenced data packets received by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkDataPktResent | 1.3.6.1.4.1.2.6.2.9.12.1.14 | Counter | read-only | The number of sequenced data packets resent by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkDataPktSent | 1.3.6.1.4.1.2.6.2.9.12.1.13 | Counter | read-only | The number of sequenced data packets sent by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkInvalidPktRcv | 1.3.6.1.4.1.2.6.2.9.12.1.17 | Counter | read-only | The number of invalid packets received by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkMaxContResent | 1.3.6.1.4.1.2.6.2.9.12.1.15 | Counter | read-only | The maximum number of contiguous resendings by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkRcvInactiveTimeouts | 1.3.6.1.4.1.2.6.2.9.12.1.20 | Counter | read-only | The number of inactivity timeouts received by the local link station used by this circuit. |
| OCT ibmdlsCirLocalLinkRouting | 1.3.6.1.4.1.2.6.2.9.12.1.9 | OCTET STRING | read-only | The routing information field used by the local link portion of this circuit. The routing information field consists of a 2-byte routing control field and up to eight 2-byte route designators. |
| INT ibmdlsCirLocalLinkState | 1.3.6.1.4.1.2.6.2.9.12.1.7 | INTEGER | read-only | The state of the local link station used by this circuit. |
| INT ibmdlsCirLocalLinkSubState | 1.3.6.1.4.1.2.6.2.9.12.1.8 | INTEGER | read-only | The sub-state of the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkTestCmdsFail | 1.3.6.1.4.1.2.6.2.9.12.1.11 | Counter | read-only | The number of test commands failed by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkTestCmdsRcv | 1.3.6.1.4.1.2.6.2.9.12.1.12 | Counter | read-only | The number of test commands received by the local link station used by this circuit. |
| CTR ibmdlsCirLocalLinkTestCmdsSent | 1.3.6.1.4.1.2.6.2.9.12.1.10 | Counter | read-only | The number of test commands sent by the local link station used by this circuit. |
| IP ibmdlsCirPartnerRouterAddress | 1.3.6.1.4.1.2.6.2.9.12.1.6 | IpAddress | read-only | The IP address of the partner router used by this circuit. |
| OCT ibmdlsCirSrcAddress | 1.3.6.1.4.1.2.6.2.9.12.1.2 | OCTET STRING | read-only | The MAC address of the source of this circuit. |
| INT ibmdlsCirSrcSap | 1.3.6.1.4.1.2.6.2.9.12.1.3 | INTEGER | read-only | The SAP identifier of the source of this circuit. |
| ibmdlsCirTable | 1.3.6.1.4.1.2.6.2.9.12 | not-accessible | Table of information on DLS circuits active on this router. | |
| OCT ibmdlsDefaultDestAddress | 1.3.6.1.4.1.2.6.2.9.9.1.1 | OCTET STRING | read-only | The destination address that this table entry applies to. |
| ibmdlsDefaultDestEntry | 1.3.6.1.4.1.2.6.2.9.9.1 | not-accessible | Mapping of a MAC address to a default router. | |
| ibmdlsDefaultDestTable | 1.3.6.1.4.1.2.6.2.9.9 | not-accessible | Table of default routers for MAC addresses. | |
| ibmdlsDefaultNBDestEntry | 1.3.6.1.4.1.2.6.2.9.10.1 | not-accessible | Mapping of a NetBIOS name to a default router. | |
| STR ibmdlsDefaultNBDestName | 1.3.6.1.4.1.2.6.2.9.10.1.1 | DisplayString | read-only | The destination NetBIOS name that this table entry applies to. |
| ibmdlsDefaultNBDestTable | 1.3.6.1.4.1.2.6.2.9.10 | not-accessible | Table of default routers for NetBIOS names. | |
| IP ibmdlsDefaultNBRouterAddress | 1.3.6.1.4.1.2.6.2.9.10.1.2 | IpAddress | read-only | The default router used for reaching the destination name in ibmdlsDefaultNBDestName. |
| IP ibmdlsDefaultRouterAddress | 1.3.6.1.4.1.2.6.2.9.9.1.2 | IpAddress | read-only | The default router used for reaching the destination address in ibmdlsDefaultDestAddress. |
| INT ibmdlsFrameFilterType | 1.3.6.1.4.1.2.6.2.9.2 | INTEGER | read-only | The type of SNA filtering applied using the ibmdlsLocalFrameFilterTable and ibmdlsRemoteFrameFilterTable. If this field = permit(2), then all filters defined for SNA use the action of permitting frames to be forwarded if they meet the criteria given by the source and destination address values. If this field = deny(1), then all filters defined for SNA use the action of denying frames to be forwarded if they meet the criteria given by the source and destination address values. |
| OCT ibmdlsLocalFrameFilterDestAddress | 1.3.6.1.4.1.2.6.2.9.5.1.4 | OCTET STRING | read-only | The destination MAC address that this filter is applied to. |
| OCT ibmdlsLocalFrameFilterDestMask | 1.3.6.1.4.1.2.6.2.9.5.1.5 | OCTET STRING | read-only | A mask indicating the bits of the destination address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the destination address is considered significant. |
| ibmdlsLocalFrameFilterEntry | 1.3.6.1.4.1.2.6.2.9.5.1 | not-accessible | Filter information for a MAC address source-destination pair. | |
| INT ibmdlsLocalFrameFilterID | 1.3.6.1.4.1.2.6.2.9.5.1.1 | INTEGER | read-only | A unique identifier for this filter. |
| OCT ibmdlsLocalFrameFilterSrcAddress | 1.3.6.1.4.1.2.6.2.9.5.1.2 | OCTET STRING | read-only | The source MAC address that this filter is applied to. |
| OCT ibmdlsLocalFrameFilterSrcMask | 1.3.6.1.4.1.2.6.2.9.5.1.3 | OCTET STRING | read-only | A mask indicating the bits of the source address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the source address is considered significant. |
| ibmdlsLocalFrameFilterTable | 1.3.6.1.4.1.2.6.2.9.5 | not-accessible | The SNA local frame filter table. This table contains information regarding the filtering of SNA frames received from local LAN segments. | |
| STR ibmdlsLocalNameFilterDestAddress | 1.3.6.1.4.1.2.6.2.9.7.1.3 | DisplayString | read-only | The destination NetBIOS name that this filter is applied to. |
| ibmdlsLocalNameFilterEntry | 1.3.6.1.4.1.2.6.2.9.7.1 | not-accessible | Filter information for a NetBIOS source-destination name pair. | |
| INT ibmdlsLocalNameFilterID | 1.3.6.1.4.1.2.6.2.9.7.1.1 | INTEGER | read-only | A unique identifier for this filter. |
| STR ibmdlsLocalNameFilterSrcAddress | 1.3.6.1.4.1.2.6.2.9.7.1.2 | DisplayString | read-only | The source NetBIOS name that this filter is applied to. |
| ibmdlsLocalNameFilterTable | 1.3.6.1.4.1.2.6.2.9.7 | not-accessible | The NetBIOS local name filter table. This table contains information regarding the filtering of NetBIOS frames received from local LAN segments. | |
| INT ibmdlsNameFilterType | 1.3.6.1.4.1.2.6.2.9.3 | INTEGER | read-only | The type of NetBIOS filtering applied using the ibmdlsLocalNameFilterTable and ibmdlsRemoteNameFilterTable. If this field = permit(2), then all filters defined for NetBIOS use the action of permitting frames to be forwarded if they meet the criteria given by the source and destination address values. If this field = deny(1), then all filters defined for NetBIOS use the action of denying frames to be forwarded if they meet the criteria given by the source and destination address values. |
| OCT ibmdlsRemoteFrameFilterDestAddress | 1.3.6.1.4.1.2.6.2.9.6.1.4 | OCTET STRING | read-only | The destination MAC address that this filter is applied to. |
| OCT ibmdlsRemoteFrameFilterDestMask | 1.3.6.1.4.1.2.6.2.9.6.1.5 | OCTET STRING | read-only | A mask indicating the bits of the destination address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the destination address is considered significant. |
| ibmdlsRemoteFrameFilterEntry | 1.3.6.1.4.1.2.6.2.9.6.1 | not-accessible | Filter information for a MAC address source-destination pair. | |
| INT ibmdlsRemoteFrameFilterID | 1.3.6.1.4.1.2.6.2.9.6.1.1 | INTEGER | read-only | A unique identifier for this filter. |
| OCT ibmdlsRemoteFrameFilterSrcAddress | 1.3.6.1.4.1.2.6.2.9.6.1.2 | OCTET STRING | read-only | The source MAC address that this filter is applied to. |
| OCT ibmdlsRemoteFrameFilterSrcMask | 1.3.6.1.4.1.2.6.2.9.6.1.3 | OCTET STRING | read-only | A mask indicating the bits of the source address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the source address is considered significant. |
| ibmdlsRemoteFrameFilterTable | 1.3.6.1.4.1.2.6.2.9.6 | not-accessible | The SNA remote frame filter table. This table contains information regarding the filtering of SNA frames received from other participating DLS routers. | |
| STR ibmdlsRemoteNameFilterDestAddress | 1.3.6.1.4.1.2.6.2.9.8.1.3 | DisplayString | read-only | The destination NetBIOS name that this filter is applied to. |
| ibmdlsRemoteNameFilterEntry | 1.3.6.1.4.1.2.6.2.9.8.1 | not-accessible | Filter information for a NetBIOS source-destination name pair. | |
| INT ibmdlsRemoteNameFilterID | 1.3.6.1.4.1.2.6.2.9.8.1.1 | INTEGER | read-only | A unique identifier for this filter. |
| STR ibmdlsRemoteNameFilterSrcAddress | 1.3.6.1.4.1.2.6.2.9.8.1.2 | DisplayString | read-only | The source NetBIOS name that this filter is applied to. |
| ibmdlsRemoteNameFilterTable | 1.3.6.1.4.1.2.6.2.9.8 | not-accessible | The NetBIOS name filter table. This table contains information regarding the filtering of NetBIOS frames received from other participating DLS routers. | |
| IP ibmdlsRouterAddress | 1.3.6.1.4.1.2.6.2.9.4.1.1 | IpAddress | read-only | The IP address of the router participating in Data Link Switching. |
| INT ibmdlsRouterDefinedBy | 1.3.6.1.4.1.2.6.2.9.4.1.3 | INTEGER | read-only | The origin of this entry. user(1) indicates that this router is defined via the Configuration Program. system(2) indicates that this router was defined automatically as a result of a connection request from another router. |
| ibmdlsRouterEntry | 1.3.6.1.4.1.2.6.2.9.4.1 | not-accessible | Information for a single participating router. | |
| CTR ibmdlsRouterInFrames | 1.3.6.1.4.1.2.6.2.9.4.1.4 | Counter | read-only | Number of frames received from the partner router. |
| CTR ibmdlsRouterOutFrames | 1.3.6.1.4.1.2.6.2.9.4.1.5 | Counter | read-only | Number of frames sent to the partner router. |
| INT ibmdlsRouterStatus | 1.3.6.1.4.1.2.6.2.9.4.1.2 | INTEGER | read-only | The current state of the remote connection |
| ibmdlsRouterTable | 1.3.6.1.4.1.2.6.2.9.4 | not-accessible | A table of information regarding all routers participating in Data Link Switching. | |
| INT ibmdlsStationAddress | 1.3.6.1.4.1.2.6.2.9.11.1.2 | INTEGER | read-only | The SDLC address of this station. |
| OCT ibmdlsStationDestAddress | 1.3.6.1.4.1.2.6.2.9.11.1.13 | OCTET STRING | read-only | The token ring physical address to which this station should be connected. If this information is not available the IBM 6611 Network Processor will return a length of zero for this object. |
| ibmdlsStationEntry | 1.3.6.1.4.1.2.6.2.9.11.1 | not-accessible | Information on a single SNA station attached to this router. | |
| INT ibmdlsStationForceDisconnectTimeout | 1.3.6.1.4.1.2.6.2.9.11.1.6 | INTEGER | read-only | The number of seconds that the IBM 6611 will wait after requesting a disconnect from the link (DISC) before forcing a disconnect. |
| INT ibmdlsStationIfIndex | 1.3.6.1.4.1.2.6.2.9.11.1.1 | INTEGER | read-only | The value of IfIndex for the port to which this station is attached. |
| INT ibmdlsStationMaxIfieldSize | 1.3.6.1.4.1.2.6.2.9.11.1.7 | INTEGER | read-only | The value in bytes of the maximum I-field size (a multiple of 256 plus 9). |
| INT ibmdlsStationPrimaryRepollCount | 1.3.6.1.4.1.2.6.2.9.11.1.9 | INTEGER | read-only | The number of times that the primary station will poll the secondary station unsuccessfully before marking the station as not working. |
| INT ibmdlsStationPrimaryRepollThreshold | 1.3.6.1.4.1.2.6.2.9.11.1.10 | INTEGER | read-only | The number of repolls as a percentage of the total polls sent to the secondary station. The specified percentage equals the maximum rate of repolls allowed, above which the IBM 6611 declares that a temporary error has occurred and logs an entry in the system error log. |
| INT ibmdlsStationPrimaryRepollTimeout | 1.3.6.1.4.1.2.6.2.9.11.1.8 | INTEGER | read-only | The length of time (in tenths of seconds) that the primary station will wait for a response from the secondary station. |
| INT ibmdlsStationPrimarySlowListTimeout | 1.3.6.1.4.1.2.6.2.9.11.1.11 | INTEGER | read-only | The number of seconds that the primary station will wait between polls to stations on the slow list. |
| INT ibmdlsStationRetransmitCount | 1.3.6.1.4.1.2.6.2.9.11.1.4 | INTEGER | read-only | The number of contiguous information frame bursts that will be transmitted to this station before declaring a permanent transmission error. |
| INT ibmdlsStationRetransmitThreshold | 1.3.6.1.4.1.2.6.2.9.11.1.5 | INTEGER | read-only | The number of information frame transmissions allowed as a percentage of total information frame transmissions. The specified rate is the maximum rate of retransmissions allowed above which an error log entry will be make. |
| OCT ibmdlsStationSrcAddress | 1.3.6.1.4.1.2.6.2.9.11.1.12 | OCTET STRING | read-only | The token ring physical address used for this station. |
| ibmdlsStationTable | 1.3.6.1.4.1.2.6.2.9.11 | not-accessible | Table of configuration information on SNA stations attached to this router. | |
| INT ibmdlsStationTransmitWindowCount | 1.3.6.1.4.1.2.6.2.9.11.1.3 | INTEGER | read-only | The number of SDLC information frames to send to this station before turning the line around to get a response. |
| INT ibmdlsVirtualRingSegmentNumber | 1.3.6.1.4.1.2.6.2.9.1 | INTEGER | read-only | The token ring segment number used in all frames passed to or from the IBM 6611 Data Link Switching function. |
| ibmdot1dBase | 1.3.6.1.4.1.2.6.2.15.1 | |||
| OCT ibmdot1dBaseBridgeAddress | 1.3.6.1.4.1.2.6.2.15.1.1 | OCTET STRING | read-only | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with ibmdot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. |
| INT ibmdot1dBaseNumPorts | 1.3.6.1.4.1.2.6.2.15.1.2 | INTEGER | read-only | The number of TB ports controlled by this bridging entity. |
| INT ibmdot1dBasePort | 1.3.6.1.4.1.2.6.2.15.1.4.1.1 | INTEGER | read-only | The port number of the port for which this entry contains bridge management information. |
| OID ibmdot1dBasePortCircuit | 1.3.6.1.4.1.2.6.2.15.1.4.1.3 | OBJECT IDENTIFIER | read-only | For a port which potentially has the same value of ibmdot1dBasePortIfIndex as another port on the same bridge, this object contains an identifier unique to this port. For example, in the case where multiple ports correspond one-to-one with multiple Frame Relay circuit's, this value provides the object identifier for the frame relay MIB. Fpr a port which has a unique value of ibmdot1dBasePortIfIndex, this object can have the value {0.0}. |
| CTR ibmdot1dBasePortDelayExceededDiscards | 1.3.6.1.4.1.2.6.2.15.1.4.1.4 | Counter | read-only | The number of frames discarded by this port due to excessive transit delay through the bridge. |
| ibmdot1dBasePortEntry | 1.3.6.1.4.1.2.6.2.15.1.4.1 | not-accessible | A list of information for each port of the bridge. | |
| INT ibmdot1dBasePortIfIndex | 1.3.6.1.4.1.2.6.2.15.1.4.1.2 | INTEGER | read-only | The value of the instance of the ifIndex object, defined in RFC 1156, RFC 1213 for the interface corresponding to this port. |
| CTR ibmdot1dBasePortMtuExceededDiscards | 1.3.6.1.4.1.2.6.2.15.1.4.1.5 | Counter | read-only | The number of frames discarded by this port due to an excessive size. |
| ibmdot1dBasePortTable | 1.3.6.1.4.1.2.6.2.15.1.4 | not-accessible | A table that contains generic information about every port that is associated with this bridge. | |
| INT ibmdot1dBaseType | 1.3.6.1.4.1.2.6.2.15.1.3 | INTEGER | read-only | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type. |
| ibmdot1dStatic | 1.3.6.1.4.1.2.6.2.15.4 | |||
| OCT ibmdot1dStaticAddress | 1.3.6.1.4.1.2.6.2.15.4.1.1.1 | OCTET STRING | read-write | The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address. |
| OCT ibmdot1dStaticAllowedToGoTo | 1.3.6.1.4.1.2.6.2.15.4.1.1.3 | OCTET STRING | read-write | The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) |
| ibmdot1dStaticEntry | 1.3.6.1.4.1.2.6.2.15.4.1.1 | not-accessible | Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded. | |
| INT ibmdot1dStaticReceivePort | 1.3.6.1.4.1.2.6.2.15.4.1.1.2 | INTEGER | read-write | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry. |
| INT ibmdot1dStaticStatus | 1.3.6.1.4.1.2.6.2.15.4.1.1.4 | INTEGER | read-write | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out. |
| ibmdot1dStaticTable | 1.3.6.1.4.1.2.6.2.15.4.1 | not-accessible | A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses. | |
| ibmdot1dStp | 1.3.6.1.4.1.2.6.2.15.2 | |||
| INT ibmdot1dStpBridgeForwardDelay | 1.3.6.1.4.1.2.6.2.15.2.14 | INTEGER | read-write | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range for this parameter is related to the value of ibmdot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1d/D9 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. The IBM 6611 Network Processor obtains this value from the 'Forward Delay Time' parameter provided to the configuration program. |
| INT ibmdot1dStpBridgeHelloTime | 1.3.6.1.4.1.2.6.2.15.2.13 | INTEGER | read-write | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1d/D9 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. The IBM 6611 Network Processor obtains this value from the 'Hello Time' parameter provided to the configuration program. |
| INT ibmdot1dStpBridgeMaxAge | 1.3.6.1.4.1.2.6.2.15.2.12 | INTEGER | read-write | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range for this parameter is related to the value of ibmdot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1d/D9 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. The IBM 6611 Network Processor obtains this value from the 'Max Age' parameter provided to the configuration program. |
| OCT ibmdot1dStpDesignatedRoot | 1.3.6.1.4.1.2.6.2.15.2.5 | OCTET STRING | read-only | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. |
| INT ibmdot1dStpForwardDelay | 1.3.6.1.4.1.2.6.2.15.2.11 | INTEGER | read-only | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in a particular state before moving to the next state. For example, how long a port stays in the Listening state when moving from Blocking to Learning. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. (Note that this value is the one that this bridge is currently using, in contrast to ibmdot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.) |
| INT ibmdot1dStpHelloTime | 1.3.6.1.4.1.2.6.2.15.2.9 | INTEGER | read-only | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
| INT ibmdot1dStpHoldTime | 1.3.6.1.4.1.2.6.2.15.2.10 | INTEGER | read-only | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. |
| INT ibmdot1dStpMaxAge | 1.3.6.1.4.1.2.6.2.15.2.8 | INTEGER | read-only | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
| INT ibmdot1dStpPort | 1.3.6.1.4.1.2.6.2.15.2.15.1.1 | INTEGER | read-only | The port number of the port for which this entry contains Spanning Tree Protocol management information. This port number is the same as that reported by ibmdot1dBasePort. |
| OCT ibmdot1dStpPortDesignatedBridge | 1.3.6.1.4.1.2.6.2.15.2.15.1.8 | OCTET STRING | read-only | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| INT ibmdot1dStpPortDesignatedCost | 1.3.6.1.4.1.2.6.2.15.2.15.1.7 | INTEGER | read-only | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| OCT ibmdot1dStpPortDesignatedPort | 1.3.6.1.4.1.2.6.2.15.2.15.1.9 | OCTET STRING | read-only | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| OCT ibmdot1dStpPortDesignatedRoot | 1.3.6.1.4.1.2.6.2.15.2.15.1.6 | OCTET STRING | read-only | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. |
| INT ibmdot1dStpPortEnable | 1.3.6.1.4.1.2.6.2.15.2.15.1.4 | INTEGER | read-write | The enabled/disabled status of the port. |
| ibmdot1dStpPortEntry | 1.3.6.1.4.1.2.6.2.15.2.15.1 | not-accessible | A list of information maintained by every port about the Spanning Tree Protocol state for that port. | |
| CTR ibmdot1dStpPortForwardTransitions | 1.3.6.1.4.1.2.6.2.15.2.15.1.10 | Counter | read-only | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| INT ibmdot1dStpPortPathCost | 1.3.6.1.4.1.2.6.2.15.2.15.1.5 | INTEGER | read-write | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. The IBM 6611 Network Processor obtains this value from the 'Path Cost' parameter provided to the configuration program. |
| INT ibmdot1dStpPortPriority | 1.3.6.1.4.1.2.6.2.15.2.15.1.2 | INTEGER | read-write | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of ibmdot1dStpPort. |
| INT ibmdot1dStpPortState | 1.3.6.1.4.1.2.6.2.15.2.15.1.3 | INTEGER | read-only | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see ibmdot1dStpPortEnable), this object will have a value of disabled(1). |
| ibmdot1dStpPortTable | 1.3.6.1.4.1.2.6.2.15.2.15 | not-accessible | A table that contains port-specific information for the Spanning Tree Protocol. | |
| INT ibmdot1dStpPriority | 1.3.6.1.4.1.2.6.2.15.2.2 | INTEGER | read-write | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of ibmdot1dBaseBridgeAddress. |
| INT ibmdot1dStpProtocolSpecification | 1.3.6.1.4.1.2.6.2.15.2.1 | INTEGER | read-only | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined. |
| INT ibmdot1dStpRootCost | 1.3.6.1.4.1.2.6.2.15.2.6 | INTEGER | read-only | The cost of the path to the root as seen from this bridge. |
| INT ibmdot1dStpRootPort | 1.3.6.1.4.1.2.6.2.15.2.7 | INTEGER | read-only | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| TIK ibmdot1dStpTimeSinceTopologyChange | 1.3.6.1.4.1.2.6.2.15.2.3 | TimeTicks | read-only | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| CTR ibmdot1dStpTopChanges | 1.3.6.1.4.1.2.6.2.15.2.4 | Counter | read-only | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| ibmdot1dTp | 1.3.6.1.4.1.2.6.2.15.3 | |||
| INT ibmdot1dTpAgingTime | 1.3.6.1.4.1.2.6.2.15.3.2 | INTEGER | read-write | The timeout period in seconds for aging out dynamically learned forwarding information. The IBM 6611 Network Processor obtains this value from the 'Aging Time' parameter provided to the configuration program. |
| OCT ibmdot1dTpFdbAddress | 1.3.6.1.4.1.2.6.2.15.3.3.1.1 | OCTET STRING | read-only | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| ibmdot1dTpFdbEntry | 1.3.6.1.4.1.2.6.2.15.3.3.1 | not-accessible | Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. | |
| INT ibmdot1dTpFdbPort | 1.3.6.1.4.1.2.6.2.15.3.3.1.2 | INTEGER | read-only | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of ibmdot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the ibmdot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of ibmdot1dTpFdbStatus is not learned(3). |
| INT ibmdot1dTpFdbStatus | 1.3.6.1.4.1.2.6.2.15.3.3.1.3 | INTEGER | read-only | The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of ibmdot1dTpFdbPort, nor an entry in the ibmdot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of ibmdot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of ibmdot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of ibmdot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of ibmdot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) : the value of the corresponding instance of ibmdot1dTpFdbAddress is also the value of an existing instance of ibmdot1dStaticAddress. |
| ibmdot1dTpFdbTable | 1.3.6.1.4.1.2.6.2.15.3.3 | not-accessible | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | |
| CTR ibmdot1dTpLearnedEntryDiscards | 1.3.6.1.4.1.2.6.2.15.3.1 | Counter | read-only | The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent. |
| INT ibmdot1dTpPort | 1.3.6.1.4.1.2.6.2.15.3.4.1.1 | INTEGER | read-only | The port number of the port for which this entry contains Transparent bridging management information. |
| ibmdot1dTpPortEntry | 1.3.6.1.4.1.2.6.2.15.3.4.1 | not-accessible | A list of information for each port of a transparent bridge. | |
| CTR ibmdot1dTpPortInDiscards | 1.3.6.1.4.1.2.6.2.15.3.4.1.5 | Counter | read-only | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. |
| CTR ibmdot1dTpPortInFrames | 1.3.6.1.4.1.2.6.2.15.3.4.1.3 | Counter | read-only | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function. |
| INT ibmdot1dTpPortMaxInfo | 1.3.6.1.4.1.2.6.2.15.3.4.1.2 | INTEGER | read-only | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| CTR ibmdot1dTpPortOutFrames | 1.3.6.1.4.1.2.6.2.15.3.4.1.4 | Counter | read-only | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function. |
| ibmdot1dTpPortTable | 1.3.6.1.4.1.2.6.2.15.3.4 | not-accessible | A table that contains information about every port that is associated with this transparent bridge. | |
| ibmDSUs | 1.3.6.1.4.1.2.6.2.3 | |||
| ibmFiltOrderInEntry | 1.3.6.1.4.1.2.6.2.7.7.1.1 | not-accessible | Filter order information for incoming frames. | |
| INT ibmFiltOrderInIfIndex | 1.3.6.1.4.1.2.6.2.7.7.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| STR ibmFiltOrderInName | 1.3.6.1.4.1.2.6.2.7.7.1.1.3 | DisplayString | read-only | The name of the filter applied to incoming frames that is associated with the priority, ibmFiltOrderInPriority. |
| INT ibmFiltOrderInPriority | 1.3.6.1.4.1.2.6.2.7.7.1.1.2 | INTEGER | read-only | The priority of when a filter is applied to an incoming frame. A value of 1 signifies that it is applied first. |
| ibmFiltOrderInTable | 1.3.6.1.4.1.2.6.2.7.7.1 | not-accessible | Table of information describing which order the filters are applied for incoming frames. | |
| INT ibmFiltOrderInType | 1.3.6.1.4.1.2.6.2.7.7.1.1.4 | INTEGER | read-only | The type of entry, either sr or tb. |
| ibmFiltOrderOutEntry | 1.3.6.1.4.1.2.6.2.7.7.2.1 | not-accessible | Filter order information for outgoing frames. | |
| INT ibmFiltOrderOutIfIndex | 1.3.6.1.4.1.2.6.2.7.7.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| STR ibmFiltOrderOutName | 1.3.6.1.4.1.2.6.2.7.7.2.1.3 | DisplayString | read-only | The name of the filter applied to outgoing frames that is associated with the priority, ibmFiltOrderOutPriority. |
| INT ibmFiltOrderOutPriority | 1.3.6.1.4.1.2.6.2.7.7.2.1.2 | INTEGER | read-only | The priority of when a filter is applied to an outgoing frame. A value of 1 signifies that it is applied first. |
| ibmFiltOrderOutTable | 1.3.6.1.4.1.2.6.2.7.7.2 | not-accessible | Table of information describing which order the filters are applied for outgoing frames. | |
| INT ibmFiltOrderOutType | 1.3.6.1.4.1.2.6.2.7.7.2.1.4 | INTEGER | read-only | The type of entry, either sr or tb. |
| ibmfr | 1.3.6.1.4.1.2.6.2.8 | |||
| INT ibmfrCircuitCommittedBurst | 1.3.6.1.4.1.2.6.2.8.2.1.12 | INTEGER | read-only | This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval. |
| TIK ibmfrCircuitCreationTime | 1.3.6.1.4.1.2.6.2.8.2.1.10 | TimeTicks | read-only | The time when this virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest. The time value is relative to other times on this interface only. |
| INT ibmfrCircuitDlci | 1.3.6.1.4.1.2.6.2.8.2.1.2 | INTEGER | read-only | The Data Link Connection Identifier for this virtual circuit. |
| ibmfrCircuitEntry | 1.3.6.1.4.1.2.6.2.8.2.1 | not-accessible | The information regarding a single Data Link Connection Identifier. | |
| INT ibmfrCircuitExcessBurst | 1.3.6.1.4.1.2.6.2.8.2.1.13 | INTEGER | read-only | This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed. |
| INT ibmfrCircuitIfIndex | 1.3.6.1.4.1.2.6.2.8.2.1.1 | INTEGER | read-only | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| TIK ibmfrCircuitLastTimeChange | 1.3.6.1.4.1.2.6.2.8.2.1.11 | TimeTicks | read-only | The time when last there was a change in the virtual circuit state. The time value is relative to other times on this interface only. |
| CTR ibmfrCircuitReceivedBECNs | 1.3.6.1.4.1.2.6.2.8.2.1.5 | Counter | read-only | Number of frames received from the network in- dicating backward congestion since the virtual circuit was created. |
| CTR ibmfrCircuitReceivedFECNs | 1.3.6.1.4.1.2.6.2.8.2.1.4 | Counter | read-only | Number of frames received from the network in- dicating forward congestion since the virtual circuit was created. |
| CTR ibmfrCircuitReceivedFrames | 1.3.6.1.4.1.2.6.2.8.2.1.8 | Counter | read-only | Number of frames received over this virtual circuit since it was created. |
| CTR ibmfrCircuitReceivedOctets | 1.3.6.1.4.1.2.6.2.8.2.1.9 | Counter | read-only | Number of octets received over this virtual circuit since it was created. |
| CTR ibmfrCircuitSentFrames | 1.3.6.1.4.1.2.6.2.8.2.1.6 | Counter | read-only | The number of frames sent from this virtual circuit since it was created. |
| CTR ibmfrCircuitSentOctets | 1.3.6.1.4.1.2.6.2.8.2.1.7 | Counter | read-only | The number of octets sent from this virtual circuit since it was created. |
| INT ibmfrCircuitState | 1.3.6.1.4.1.2.6.2.8.2.1.3 | INTEGER | read-only | Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by set- ting virtual circuit state to active, or delet- ed by changing Circuit state to deleted. Whether or not the row actually disappears is let to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to inactive to tem- porarily disable a given circuit. |
| ibmfrCircuitTable | 1.3.6.1.4.1.2.6.2.8.2 | not-accessible | A table containing information about specific Data Link Connection Identifiers and corresponding virtual circuits. | |
| INT ibmfrCircuitThroughput | 1.3.6.1.4.1.2.6.2.8.2.1.14 | INTEGER | read-only | Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement inter- val. If the configured committed burst rate and throughput are both non-zero, the measurement interval T=ibmfrCircuitCommittedBurst/ibmfrCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement in- terval T=ibmfrCircuitExcessBurst/ifSpeed. |
| INT ibmfrDlcmiAddress | 1.3.6.1.4.1.2.6.2.8.1.1.3 | INTEGER | read-only | This variable states which address format is in use on the Frame Relay interface. |
| INT ibmfrDlcmiAddressLen | 1.3.6.1.4.1.2.6.2.8.1.1.4 | INTEGER | read-only | This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address in- cluding the control portion. |
| ibmfrDlcmiEntry | 1.3.6.1.4.1.2.6.2.8.1.1 | not-accessible | The Parameters for the Data Link Connection Management Interface. | |
| INT ibmfrDlcmiErrorThreshold | 1.3.6.1.4.1.2.6.2.8.1.1.7 | INTEGER | read-only | This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down. |
| INT ibmfrDlcmiFullEnquiryInterval | 1.3.6.1.4.1.2.6.2.8.1.1.6 | INTEGER | read-only | Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage. |
| INT ibmfrDlcmiIfIndex | 1.3.6.1.4.1.2.6.2.8.1.1.1 | INTEGER | read-only | The ifIndex value of the corresponding ifEn- try. |
| INT ibmfrDlcmiMaxSupportedVCs | 1.3.6.1.4.1.2.6.2.8.1.1.9 | INTEGER | read-only | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal capability is configured, the agent should respond bad- Value |
| INT ibmfrDlcmiMonitoredEvents | 1.3.6.1.4.1.2.6.2.8.1.1.8 | INTEGER | read-only | This is the maximum number of responses to FULL STATUS or LINK INTEGERITY VERIFICATION messages missed before the device will mark the interface down. |
| INT ibmfrDlcmiMulticast | 1.3.6.1.4.1.2.6.2.8.1.1.10 | INTEGER | read-only | This indicates whether the Frame Relay provid- er offers a Multicast Service. |
| INT ibmfrDlcmiPollingInterval | 1.3.6.1.4.1.2.6.2.8.1.1.5 | INTEGER | read-only | This is the number of seconds between succes- sive status enquiry messages. |
| INT ibmfrDlcmiState | 1.3.6.1.4.1.2.6.2.8.1.1.2 | INTEGER | read-only | This variable states which Data Link Connec- tion Management scheme is active (and by impli- cation, what DLCI it uses) on the Frame Relay interface. |
| ibmfrDlcmiTable | 1.3.6.1.4.1.2.6.2.8.1 | not-accessible | The Parameters for the Data Link Connection Management Interface corresponding to any given ifEntry. | |
| OCT ibmfrErrData | 1.3.6.1.4.1.2.6.2.8.3.1.3 | OCTET STRING | read-only | An octet string containing as much of the er- ror packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all in- formation up to the PDU. |
| ibmfrErrEntry | 1.3.6.1.4.1.2.6.2.8.3.1 | not-accessible | The error information for a single frame relay interface. | |
| INT ibmfrErrIfIndex | 1.3.6.1.4.1.2.6.2.8.3.1.1 | INTEGER | read-only | The ifIndex Value of the corresponding ifEn- try. |
| ibmfrErrTable | 1.3.6.1.4.1.2.6.2.8.3 | not-accessible | A table containing information about Errors on the Frame Relay interface. | |
| TIK ibmfrErrTime | 1.3.6.1.4.1.2.6.2.8.3.1.4 | TimeTicks | read-only | The time at which the error was detected. The time value is relative to other times on this interface only. |
| INT ibmfrErrType | 1.3.6.1.4.1.2.6.2.8.3.1.2 | INTEGER | read-only | The type of error that was last seen on this interface. |
| INT ibmhopCountFilterBcastType | 1.3.6.1.4.1.2.6.2.7.5.1.1.2 | INTEGER | read-only | Determines what type of incoming frames will be filtered. |
| INT ibmhopCountFilterCount | 1.3.6.1.4.1.2.6.2.7.5.1.1.3 | INTEGER | read-only | The number of hops allowed for incoming frames. |
| INT ibmhopCountFilterIfIndex | 1.3.6.1.4.1.2.6.2.7.5.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| ibmhopCountFilterInfoEntry | 1.3.6.1.4.1.2.6.2.7.5.1.1 | not-accessible | Hop count filtering information for a single interface. | |
| ibmhopCountFilterInfoTable | 1.3.6.1.4.1.2.6.2.7.5.1 | not-accessible | Table of hop count filtering information. | |
| ibmicmp | 1.3.6.1.4.1.2.6.2.5 | |||
| ibminterfaces | 1.3.6.1.4.1.2.6.2.19 | |||
| ibmipext | 1.3.6.1.4.1.2.6.2.19.1 | |||
| IP ibmipFilterAddr1 | 1.3.6.1.4.1.2.6.2.19.1.3.1.6 | IpAddress | read-only | A valid IP address of the host, subnet or network for this filter. For singular filters, this is the only end point, however, for dual filters this is the source end point. |
| IP ibmipFilterAddr2 | 1.3.6.1.4.1.2.6.2.19.1.3.1.8 | IpAddress | read-only | Defines the destination IP address if ibmipFilterType is dual. This value is undefined for singular filters. |
| ibmipFilterEntry | 1.3.6.1.4.1.2.6.2.19.1.3.1 | not-accessible | An entry in the IP address/mask filter table. | |
| ibmipFilterExtEntry | 1.3.6.1.4.1.2.6.2.19.1.4.1 | not-accessible | An entry in the IP port number filter table. | |
| INT ibmipFilterExtFilterId | 1.3.6.1.4.1.2.6.2.19.1.4.1.2 | INTEGER | read-only | An id that defines this filter entry. This number is unique within this interface and is the same filter ID as defined by ibmipFilterId. |
| INT ibmipFilterExtIfIndex | 1.3.6.1.4.1.2.6.2.19.1.4.1.1 | INTEGER | read-only | Defines the interface associated with this IP port number filter definition. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group. |
| INT ibmipFilterExtProtocol | 1.3.6.1.4.1.2.6.2.19.1.4.1.4 | INTEGER | read-only | Specifies the protocol associated with the value defined by ibmipFilterExtValue for this filter specification. |
| ibmipFilterExtTable | 1.3.6.1.4.1.2.6.2.19.1.4 | not-accessible | Table of IP port number filter definitions. | |
| INT ibmipFilterExtValue | 1.3.6.1.4.1.2.6.2.19.1.4.1.3 | INTEGER | read-only | Defines a TCP or UDP port number that will be filtered using this filter specification. |
| INT ibmipFilterId | 1.3.6.1.4.1.2.6.2.19.1.3.1.2 | INTEGER | read-only | An id that defines this filter entry. This number is unique within this interface. |
| INT ibmipFilterIfIndex | 1.3.6.1.4.1.2.6.2.19.1.3.1.1 | INTEGER | read-only | Defines the interface associated with this address/mask filter definition. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group. |
| IP ibmipFilterMask1 | 1.3.6.1.4.1.2.6.2.19.1.3.1.7 | IpAddress | read-only | A valid IP address mask used for this filter. In conjunction with the IP address defined by ibmipFilterAddr1, it defines the range of IP addresses to be filtered. |
| IP ibmipFilterMask2 | 1.3.6.1.4.1.2.6.2.19.1.3.1.9 | IpAddress | read-only | A valid IP address mask used for this filter. In conjunction with the IP address defined by ibmipFilterAddr2, it defines the range of IP addresses to be filtered. |
| INT ibmipFilterScope | 1.3.6.1.4.1.2.6.2.19.1.3.1.3 | INTEGER | read-only | Defines whether this filter is applied to all interfaces or just this one. |
| ibmipFilterTable | 1.3.6.1.4.1.2.6.2.19.1.3 | not-accessible | Table of IP address/mask filter definitions. | |
| INT ibmipFilterType | 1.3.6.1.4.1.2.6.2.19.1.3.1.4 | INTEGER | read-only | Defines the type of filtering. |
| INT ibmipPermitDeny | 1.3.6.1.4.1.2.6.2.19.1.3.1.5 | INTEGER | read-only | Identifies whether traffic for a specified filter ID is to be permitted to pass through the IBM 6611 or whether it is to be discarded. |
| INT ibmipPtyQueueDefault | 1.3.6.1.4.1.2.6.2.19.1.1.1.3 | INTEGER | read-only | Identifies the transmission queue to be used for IP packets which are not assigned to use a specific transmission queue. |
| INT ibmipPtyQueueEnable | 1.3.6.1.4.1.2.6.2.19.1.1.1.2 | INTEGER | read-only | The value of this object identifies if IP prioritization is enabled on this interface. |
| ibmipPtyQueueEnableEntry | 1.3.6.1.4.1.2.6.2.19.1.1.1 | not-accessible | Each entry defines whether IP prioritization is enabled on a particular interface and the default transmission queue. | |
| INT ibmipPtyQueueEnableIfIndex | 1.3.6.1.4.1.2.6.2.19.1.1.1.1 | INTEGER | read-only | Defines the interface associated with IP prioritization. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group. |
| ibmipPtyQueueEnableTable | 1.3.6.1.4.1.2.6.2.19.1.1 | not-accessible | This table defines which interfaces are enabled for IP prioritization. It also defines the default serial transmission priority queue to be used for IP packets which are not assigned to use a specific transmission queue. | |
| ibmipPtyQueueEntry | 1.3.6.1.4.1.2.6.2.19.1.2.1 | not-accessible | Each entry defines the UDP/TCP port number and its associated transmission priority queue for a given interface. | |
| INT ibmipPtyQueueIfIndex | 1.3.6.1.4.1.2.6.2.19.1.2.1.1 | INTEGER | read-only | Defines the interface on which a UDP/TCP port is associated with a specific transmission priority queue. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group. |
| INT ibmipPtyQueueNumber | 1.3.6.1.4.1.2.6.2.19.1.2.1.4 | INTEGER | read-only | Indicates which transmission queue will be used to transmit a packet which has a port number as specified by ibmipPtyQueuePort. |
| INT ibmipPtyQueuePort | 1.3.6.1.4.1.2.6.2.19.1.2.1.2 | INTEGER | read-only | Identifies a UDP or TCP port number. |
| ibmipPtyQueueTable | 1.3.6.1.4.1.2.6.2.19.1.2 | not-accessible | This table contains the assignments of UDP/TCP port numbers to specific transmission queues for a given serial interface. | |
| INT ibmipPtyQueueType | 1.3.6.1.4.1.2.6.2.19.1.2.1.3 | INTEGER | read-only | Indicates the port type of the port number defined by ibmipPtyQueuePort. |
| ibmipx | 1.3.6.1.4.1.2.6.2.12 | |||
| OCT ibmipxAddrAddress | 1.3.6.1.4.1.2.6.2.12.34.1.1 | OCTET STRING | read-only | The IPX address to which this entry's addressing information pertains. |
| ibmipxAddrEntry | 1.3.6.1.4.1.2.6.2.12.34.1 | not-accessible | An entry in the IPX address table. | |
| INT ibmipxAddrIfIndex | 1.3.6.1.4.1.2.6.2.12.34.1.2 | INTEGER | read-only | The interface index which identifies the interface to which this entry is applicable. |
| ibmipxAddrTable | 1.3.6.1.4.1.2.6.2.12.34 | not-accessible | The IPX Address Table. | |
| ibmipxConfigEntry | 1.3.6.1.4.1.2.6.2.12.4.1 | not-accessible | IPX configuration information for a single interface. | |
| ibmipxConfigTable | 1.3.6.1.4.1.2.6.2.12.4 | not-accessible | The table of IPX configuration information gathered on a per-interface basis. | |
| ibmipxFilterEntry | 1.3.6.1.4.1.2.6.2.12.36.1 | not-accessible | An entry in the IPX filter table. | |
| INT ibmipxFilterHCCompare | 1.3.6.1.4.1.2.6.2.12.36.1.6 | INTEGER | read-only | Indicates the relational association desired if filtering is being done based on hop count. If filtering is not being done based on hop count (that is, if the hop count portion of ibmipxFilterMask is 0) the value of this object will be none(1). |
| INT ibmipxFilterIfIndex | 1.3.6.1.4.1.2.6.2.12.36.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmipxFilterMask | 1.3.6.1.4.1.2.6.2.12.36.1.4 | OCTET STRING | read-only | An octet string indicating the parts of the IDP header relevant to this filter entry. This mask will be bitwise ANDed with the IDP packet; if the result is equal to the value of ibmipxFilterValue, the packet will be filtered according to the value of ibmipxFilterType. |
| INT ibmipxFilterNumber | 1.3.6.1.4.1.2.6.2.12.36.1.2 | INTEGER | read-only | A unique integer identifying this filter entry for this interface. |
| ibmipxFilterTable | 1.3.6.1.4.1.2.6.2.12.36 | not-accessible | The IPX Filter Table. | |
| INT ibmipxFilterType | 1.3.6.1.4.1.2.6.2.12.36.1.5 | INTEGER | read-only | Determines whether this filter is a deny entry or a permit entry. |
| CTR ibmipxFilterUse | 1.3.6.1.4.1.2.6.2.12.36.1.7 | Counter | read-only | Usage count for this filter entry. |
| OCT ibmipxFilterValue | 1.3.6.1.4.1.2.6.2.12.36.1.3 | OCTET STRING | read-only | An octet string representing the IDP header information required by this filter entry. Incoming IDP packets will be bitwise ANDed with the value of ibmipxFilterMask, and if the result is equal to the value of this object, the packet will be filtered according to the value of ibmipxFilterType. The structure of an IDP header is as follows: BIT16 checksum BIT16 length BIT8 transport control (ie. hop count) BIT8 packet type BIT32 destination network address BIT48 destination host address BIT16 destination socket BIT32 source network address BIT48 source host address BIT16 source socket |
| CTR ibmipxidpBadLen | 1.3.6.1.4.1.2.6.2.12.21 | Counter | read-only | Number of IDP datagrams with number of bytes in the packet less than the number of bytes specified in the IDP header field. |
| CTR ibmipxidpBadSum | 1.3.6.1.4.1.2.6.2.12.22 | Counter | read-only | Number of IDP datagrams with a bad checksum |
| CTR ibmipxidpBadTTL | 1.3.6.1.4.1.2.6.2.12.23 | Counter | read-only | Number of IDP datagrams with TTL value > IDP maximum hopcount of 16. |
| CTR ibmipxidpBcastInReceives | 1.3.6.1.4.1.2.6.2.12.6 | Counter | read-only | Number of IDP broadcast datagrams received. |
| CTR ibmipxidpBcastOutRequests | 1.3.6.1.4.1.2.6.2.12.12 | Counter | read-only | Number of IDP broadcast datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmipxidpForwDatagrams. |
| INT ibmipxidpChecksum | 1.3.6.1.4.1.2.6.2.12.4.1.3 | INTEGER | read-only | Indicates the type of checksumming being done by IDP. |
| INT ibmipxidpForwarding | 1.3.6.1.4.1.2.6.2.12.1 | INTEGER | read-only | Indicates if this node is acting as an IPX router. |
| CTR ibmipxidpForwDatagrams | 1.3.6.1.4.1.2.6.2.12.14 | Counter | read-only | Number of IDP datagrams for which an attempt was made to forward. |
| CTR ibmipxidpInAddrErrors | 1.3.6.1.4.1.2.6.2.12.10 | Counter | read-only | Number of incoming IDP datagrams discarded because the network portion of the address did not match the configured address for this host. |
| CTR ibmipxidpInDiscards | 1.3.6.1.4.1.2.6.2.12.8 | Counter | read-only | Number of incoming IDP datagrams discarded due to lack of resources. |
| CTR ibmipxidpInReceives | 1.3.6.1.4.1.2.6.2.12.5 | Counter | read-only | Total number of IDP datagrams received. |
| CTR ibmipxidpOutDiscards | 1.3.6.1.4.1.2.6.2.12.15 | Counter | read-only | Total number of outgoing IDP datagrams discarded. |
| CTR ibmipxidpOutNoRoutes | 1.3.6.1.4.1.2.6.2.12.16 | Counter | read-only | Number of outgoing IDP datagrams discarded because no route was available to the specified destination. |
| CTR ibmipxidpOutRequests | 1.3.6.1.4.1.2.6.2.12.11 | Counter | read-only | Number of IDP datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmipxidpForwDatagrams. |
| CTR ibmipxidpRoutingDiscards | 1.3.6.1.4.1.2.6.2.12.17 | Counter | read-only | Number of routing entries discarded even though they were valid. |
| CTR ibmipxidpTooSmall | 1.3.6.1.4.1.2.6.2.12.20 | Counter | read-only | Number of IDP datagrams with len < the size of an IDP header. |
| CTR ibmipxidpZeroDirBcast | 1.3.6.1.4.1.2.6.2.12.19 | Counter | read-only | Number of IDP datagrams forwarded to the system due to zeronet broadcast. |
| INT ibmipxLoopbackActive | 1.3.6.1.4.1.2.6.2.12.4.1.5 | INTEGER | read-only | Indicates if this port will use the hardware to loopback locally addressed packets or return the packet to the system via a software loopback. |
| INT ibmipxPortIfIndex | 1.3.6.1.4.1.2.6.2.12.4.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmipxPortStatus | 1.3.6.1.4.1.2.6.2.12.4.1.2 | INTEGER | read-only | The status of the IPX protocol stack on this interface. |
| OCT ibmipxRouteDest | 1.3.6.1.4.1.2.6.2.12.35.1.1 | OCTET STRING | read-only | The desination network of this route. |
| ibmipxRouteEntry | 1.3.6.1.4.1.2.6.2.12.35.1 | not-accessible | An entry in the IPX route table. | |
| INT ibmipxRouteIfIndex | 1.3.6.1.4.1.2.6.2.12.35.1.2 | INTEGER | read-only | The index value which identifies the local interface through which the next hop of this route should be reached. |
| INT ibmipxRouteMetric | 1.3.6.1.4.1.2.6.2.12.35.1.4 | INTEGER | read-only | The hop count to the destination. |
| OCT ibmipxRouteNextHop | 1.3.6.1.4.1.2.6.2.12.35.1.3 | OCTET STRING | read-only | The IPX network address of the next hop of this route. |
| ibmipxRouteTable | 1.3.6.1.4.1.2.6.2.12.35 | not-accessible | The IPX Route Table. | |
| CTR ibmipxRouteUse | 1.3.6.1.4.1.2.6.2.12.35.1.5 | Counter | read-only | Reference counter for this route. |
| INT ibmipxsapServerAge | 1.3.6.1.4.1.2.6.2.12.43.1.6 | INTEGER | read-only | The number of seconds since this server entry was updated by the SAP protocol. |
| ibmipxsapServerEntry | 1.3.6.1.4.1.2.6.2.12.43.1 | not-accessible | Information on a single server. | |
| INT ibmipxsapServerHops | 1.3.6.1.4.1.2.6.2.12.43.1.7 | INTEGER | read-only | The number of network hops required to reach this server. |
| OCT ibmipxsapServerHost | 1.3.6.1.4.1.2.6.2.12.43.1.3 | OCTET STRING | read-only | The IPX host address of this server. |
| INT ibmipxsapServerIfIndex | 1.3.6.1.4.1.2.6.2.12.43.1.8 | INTEGER | read-only | The interface which is used to reach this server. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmipxsapServerIndex | 1.3.6.1.4.1.2.6.2.12.43.1.9 | INTEGER | read-only | A unique number identifying servers advertised at the same IPX network and host address. |
| STR ibmipxsapServerName | 1.3.6.1.4.1.2.6.2.12.43.1.5 | DisplayString | read-only | The name of this server. |
| OCT ibmipxsapServerNet | 1.3.6.1.4.1.2.6.2.12.43.1.2 | OCTET STRING | read-only | The IPX network number of this server. |
| CTR ibmipxsapServerRequestsFiltered | 1.3.6.1.4.1.2.6.2.12.43.1.10 | Counter | read-only | Number of times a request for this server has been filtered. |
| INT ibmipxsapServerSocket | 1.3.6.1.4.1.2.6.2.12.43.1.4 | INTEGER | read-only | The IPX socket number this server uses to advertise its service. |
| ibmipxsapServerTable | 1.3.6.1.4.1.2.6.2.12.43 | not-accessible | Table of IPX servers. | |
| INT ibmipxsapServerType | 1.3.6.1.4.1.2.6.2.12.43.1.1 | INTEGER | read-only | The type of this server. |
| CTR ibmipxsapStatInErrors | 1.3.6.1.4.1.2.6.2.12.41 | Counter | read-only | Number of incoming SAP packets discarded due to errors. |
| CTR ibmipxsapStatInRequests | 1.3.6.1.4.1.2.6.2.12.37 | Counter | read-only | Number of SAP requests received by this entity. |
| CTR ibmipxsapStatInResponses | 1.3.6.1.4.1.2.6.2.12.39 | Counter | read-only | Number of SAP responses received by this entity. |
| CTR ibmipxsapStatOutDiscards | 1.3.6.1.4.1.2.6.2.12.42 | Counter | read-only | Number of outgoing SAP packets discarded due to lack of resources. |
| CTR ibmipxsapStatOutRequests | 1.3.6.1.4.1.2.6.2.12.38 | Counter | read-only | Number of SAP requests sent by this entity. |
| CTR ibmipxsapStatOutResponses | 1.3.6.1.4.1.2.6.2.12.40 | Counter | read-only | Number of SAP responses sent by this entity. |
| INT ibmmacAddrFilterIfIndex | 1.3.6.1.4.1.2.6.2.7.1.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmmacAddrFilterInBcastType | 1.3.6.1.4.1.2.6.2.7.1.1.1.2 | INTEGER | read-only | For the incoming MAC address filter table, determines what type of frames will be filtered. |
| OCT ibmmacAddrFilterInDestAddress | 1.3.6.1.4.1.2.6.2.7.1.2.1.4 | OCTET STRING | read-only | MAC destination address to be filtered. |
| OCT ibmmacAddrFilterInDestMask | 1.3.6.1.4.1.2.6.2.7.1.2.1.5 | OCTET STRING | read-only | Mask to allow ibmmacAddrFilterInDestAddress to be used as a range of values. |
| ibmmacAddrFilterInEntry | 1.3.6.1.4.1.2.6.2.7.1.2.1 | not-accessible | Filtering information for incoming frames. | |
| INT ibmmacAddrFilterInFilterType | 1.3.6.1.4.1.2.6.2.7.1.1.1.4 | INTEGER | read-only | For the incoming filter table, determines whether the entries are permit or deny entries. |
| ibmmacAddrFilterInfoEntry | 1.3.6.1.4.1.2.6.2.7.1.1.1 | not-accessible | MAC address filtering information for a single interface. | |
| ibmmacAddrFilterInfoTable | 1.3.6.1.4.1.2.6.2.7.1.1 | not-accessible | Table of MAC address filtering information. | |
| INT ibmmacAddrFilterInIfIndex | 1.3.6.1.4.1.2.6.2.7.1.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| CTR ibmmacAddrFilterInNotForwarded | 1.3.6.1.4.1.2.6.2.7.1.1.1.6 | Counter | read-only | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| OCT ibmmacAddrFilterInSrcAddress | 1.3.6.1.4.1.2.6.2.7.1.2.1.2 | OCTET STRING | read-only | MAC source address to be filtered. |
| OCT ibmmacAddrFilterInSrcMask | 1.3.6.1.4.1.2.6.2.7.1.2.1.3 | OCTET STRING | read-only | Mask to allow ibmmacAddrFilterInSrcAddress to be used as a range of values. |
| ibmmacAddrFilterInTable | 1.3.6.1.4.1.2.6.2.7.1.2 | not-accessible | Table of MAC address filtering information for incoming frames. | |
| INT ibmmacAddrFilterInType | 1.3.6.1.4.1.2.6.2.7.1.2.1.6 | INTEGER | read-only | The type of entry, either sr or tb. |
| INT ibmmacAddrFilterOutBcastType | 1.3.6.1.4.1.2.6.2.7.1.1.1.3 | INTEGER | read-only | For the outgoing MAC address filter table, determines what type of frames will be filtered. |
| OCT ibmmacAddrFilterOutDestAddress | 1.3.6.1.4.1.2.6.2.7.1.3.1.4 | OCTET STRING | read-only | MAC destination address to be filtered. |
| OCT ibmmacAddrFilterOutDestMask | 1.3.6.1.4.1.2.6.2.7.1.3.1.5 | OCTET STRING | read-only | Mask to allow ibmmacAddrFilterOutDestAddress to be used as a range of values. |
| ibmmacAddrFilterOutEntry | 1.3.6.1.4.1.2.6.2.7.1.3.1 | not-accessible | Filtering information for outgoing frames. | |
| INT ibmmacAddrFilterOutFilterType | 1.3.6.1.4.1.2.6.2.7.1.1.1.5 | INTEGER | read-only | For the outgoing filter table, determines whether the entries are permit or deny entries. |
| INT ibmmacAddrFilterOutIfIndex | 1.3.6.1.4.1.2.6.2.7.1.3.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| CTR ibmmacAddrFilterOutNotForwarded | 1.3.6.1.4.1.2.6.2.7.1.1.1.7 | Counter | read-only | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| OCT ibmmacAddrFilterOutSrcAddress | 1.3.6.1.4.1.2.6.2.7.1.3.1.2 | OCTET STRING | read-only | MAC source address to be filtered. |
| OCT ibmmacAddrFilterOutSrcMask | 1.3.6.1.4.1.2.6.2.7.1.3.1.3 | OCTET STRING | read-only | Mask to allow ibmmacAddrFilterOutSrcAddress to be used as a range of values. |
| ibmmacAddrFilterOutTable | 1.3.6.1.4.1.2.6.2.7.1.3 | not-accessible | Table of MAC address filtering information for outgoing frames. | |
| INT ibmmacAddrFilterOutType | 1.3.6.1.4.1.2.6.2.7.1.3.1.6 | INTEGER | read-only | Type type of entry either sr or tb |
| INT ibmmacAddrFilterType | 1.3.6.1.4.1.2.6.2.7.1.1.1.8 | INTEGER | read-only | The type of entry, either sr or tb. |
| GAU ibmMainProcessorLoad | 1.3.6.1.4.1.2.6.2.4.1.1.2 | Gauge | read-only | The main processor load averaged over one minute. The load is given as a percentage. For example, 25% is 25. |
| ibmMainProcessorLoadEntry | 1.3.6.1.4.1.2.6.2.4.1.1 | not-accessible | An entry in the main processor load table. | |
| INT ibmMainProcessorLoadIndex | 1.3.6.1.4.1.2.6.2.4.1.1.1 | INTEGER | read-only | Indicates the number of minutes ago that this entry contains main processor load information for. |
| ibmMainProcessorLoadTable | 1.3.6.1.4.1.2.6.2.4.1 | not-accessible | A table containing the average main processor load over each minute for the last 60 minutes. | |
| ibmmaint | 1.3.6.1.4.1.2.6.2.4.4 | |||
| INT ibmmaintShutdown | 1.3.6.1.4.1.2.6.2.4.4.1 | INTEGER | read-write | When read, an active 6611 will return the value running(1). To force a shutdown, without a subsequent re-ipl of the 6611, this value should be set to shutdown-noipl(2). To recyle the 6611, (i.e.- shutdown with a subsequent re-ipl), and use the currently installed configuration, this variable should be set to shutdown-ipl-local(4). |
| ibmnbpFilter | 1.3.6.1.4.1.2.6.2.16.2 | |||
| CTR ibmnbpFilterPacketsFiltered | 1.3.6.1.4.1.2.6.2.16.2.1 | Counter | read-only | The number of packets filtered by nbp filters. |
| CTR ibmnbpFilterPacketsSent | 1.3.6.1.4.1.2.6.2.16.2.2 | Counter | read-only | The number of packets not filtered by nbp filters. |
| ibmppp | 1.3.6.1.4.1.2.6.2.10 | |||
| INT ibmpppIPCPCompressionType | 1.3.6.1.4.1.2.6.2.10.5.2.1.7 | INTEGER | read-only | The compression type used on this link as defined in section 5.2 of RFC 1172. The numerical values that this object can be are the same as the numerical values that are included in the IPCP compression option configuration packets. The IBM 6611 Network Processor always provides a value of none(1) for this object. |
| ibmpppIPCPEntry | 1.3.6.1.4.1.2.6.2.10.5.2.1 | not-accessible | All information pertinant to running the IPCP over a single PPP link. | |
| CTR ibmpppIPCPInOctets | 1.3.6.1.4.1.2.6.2.10.5.2.1.4 | Counter | read-only | The number of octets received in IPCP packets received on the link identified by ibmpppIPCPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted. |
| CTR ibmpppIPCPInPackets | 1.3.6.1.4.1.2.6.2.10.5.2.1.3 | Counter | read-only | The number of IPCP packets received on the link identified by ibmpppIPCPLinkNumber. |
| INT ibmpppIPCPLinkNumber | 1.3.6.1.4.1.2.6.2.10.5.2.1.1 | INTEGER | read-only | The value of ibmpppLinkIndex for the link over which this instance of the IPCP is being run. |
| CTR ibmpppIPCPOutOctets | 1.3.6.1.4.1.2.6.2.10.5.2.1.6 | Counter | read-only | The number of octets all in IPCP packets sent on the link identified by ibmpppIPCPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted. |
| CTR ibmpppIPCPOutPackets | 1.3.6.1.4.1.2.6.2.10.5.2.1.5 | Counter | read-only | The number of IPCP packets sent on the link identified by ibmpppIPLinkNumber. |
| CTR ibmpppIPCPRejects | 1.3.6.1.4.1.2.6.2.10.5.2.1.2 | Counter | read-only | The number of Protocol Reject Messages received when attempting to send an IPCP Packet over the link identified by ibmpppIPCPLinkNumber. |
| ibmpppIPCPTable | 1.3.6.1.4.1.2.6.2.10.5.2 | not-accessible | A table containing specific information for the running of the IPCP over PPP in this managed object. An entry in this table is uniquely identified by the ibmpppIPCPLinkNumber value comprised by said entry. | |
| ibmpppIPEntry | 1.3.6.1.4.1.2.6.2.10.5.1.1 | not-accessible | All information pertinant to running the IP over a single PPP link. | |
| CTR ibmpppIPInOctets | 1.3.6.1.4.1.2.6.2.10.5.1.1.4 | Counter | read-only | The number of octets received in IP packets received on the link identified by ibmpppIPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted. |
| CTR ibmpppIPInPackets | 1.3.6.1.4.1.2.6.2.10.5.1.1.3 | Counter | read-only | The number of IP packets received on the link identified by ibmpppIPLinkNumber. |
| INT ibmpppIPLinkNumber | 1.3.6.1.4.1.2.6.2.10.5.1.1.1 | INTEGER | read-only | The value of ibmpppLinkIndex for the link over which this instance of the IP is being run. |
| CTR ibmpppIPOutOctets | 1.3.6.1.4.1.2.6.2.10.5.1.1.6 | Counter | read-only | The number of octets all in IP Packets sent on the link identified by ibmpppIPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted. |
| CTR ibmpppIPOutPackets | 1.3.6.1.4.1.2.6.2.10.5.1.1.5 | Counter | read-only | The number of IP packets sent on the link identified by ibmpppIPLinkNumber. |
| CTR ibmpppIPRejects | 1.3.6.1.4.1.2.6.2.10.5.1.1.2 | Counter | read-only | The number of Protocol Reject Messages received when attempting to send an IP packet over the link identified by ibmpppIPLinkNumber. |
| ibmpppIPTable | 1.3.6.1.4.1.2.6.2.10.5.1 | not-accessible | A table containing specific information for the running of the IP over PPP in this managed object. An entry in this table is uniquely identified by the ibmpppIPLinkNumber value comprised by said entry. | |
| ibmpppLCPEntry | 1.3.6.1.4.1.2.6.2.10.5.3.1 | not-accessible | All information pertinant to running LCP over a single PPP link. | |
| CTR ibmpppLCPInCAs | 1.3.6.1.4.1.2.6.2.10.5.3.1.10 | Counter | read-only | Number of Configuration Acknowledge packets received on this link. |
| CTR ibmpppLCPInCNs | 1.3.6.1.4.1.2.6.2.10.5.3.1.12 | Counter | read-only | Number of Configuration NAK packets received on this link. |
| CTR ibmpppLCPInCodeRejs | 1.3.6.1.4.1.2.6.2.10.5.3.1.20 | Counter | read-only | Number of Code Reject packets received on this link. |
| CTR ibmpppLCPInCRejs | 1.3.6.1.4.1.2.6.2.10.5.3.1.14 | Counter | read-only | Number of Configuration Reject packets received on this link. |
| CTR ibmpppLCPInCRs | 1.3.6.1.4.1.2.6.2.10.5.3.1.8 | Counter | read-only | Number of Configuration Request packets received on this link. |
| CTR ibmpppLCPInDiscReqs | 1.3.6.1.4.1.2.6.2.10.5.3.1.26 | Counter | read-only | Number of Discard Request packets received on this link. |
| CTR ibmpppLCPInEchoReps | 1.3.6.1.4.1.2.6.2.10.5.3.1.24 | Counter | read-only | Number of Echo Reply packets received on this link. |
| CTR ibmpppLCPInEchoReqs | 1.3.6.1.4.1.2.6.2.10.5.3.1.22 | Counter | read-only | Number of Echo Request packets received on this link. |
| CTR ibmpppLCPInOctets | 1.3.6.1.4.1.2.6.2.10.5.3.1.4 | Counter | read-only | The number of octets received in LCP packets received on the link identified by ibmpppLCPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted. |
| CTR ibmpppLCPInPackets | 1.3.6.1.4.1.2.6.2.10.5.3.1.3 | Counter | read-only | The number of LCP packets received on the link identified by ibmpppLCPLinkNumber. |
| CTR ibmpppLCPInTAs | 1.3.6.1.4.1.2.6.2.10.5.3.1.18 | Counter | read-only | Number of Terminate Acknowledge packets received on this link. |
| CTR ibmpppLCPInTRs | 1.3.6.1.4.1.2.6.2.10.5.3.1.16 | Counter | read-only | Number of Terminate Request packets received on this link. |
| INT ibmpppLCPLinkNumber | 1.3.6.1.4.1.2.6.2.10.5.3.1.1 | INTEGER | read-only | The value of ibmpppLinkIndex for the link over which this instance of LCP is being run. |
| CTR ibmpppLCPOutCAs | 1.3.6.1.4.1.2.6.2.10.5.3.1.9 | Counter | read-only | Number of Configuration Acknowledge packets sent on this link. |
| CTR ibmpppLCPOutCNs | 1.3.6.1.4.1.2.6.2.10.5.3.1.11 | Counter | read-only | Number of Configuration NAK packets sent on this link. |
| CTR ibmpppLCPOutCodeRejs | 1.3.6.1.4.1.2.6.2.10.5.3.1.19 | Counter | read-only | Number of Code Reject packets sent on this link. |
| CTR ibmpppLCPOutCRejs | 1.3.6.1.4.1.2.6.2.10.5.3.1.13 | Counter | read-only | Number of Configuration Reject packets sent on this link. |
| CTR ibmpppLCPOutCRs | 1.3.6.1.4.1.2.6.2.10.5.3.1.7 | Counter | read-only | Number of Configuration Request packets sent on this link. |
| CTR ibmpppLCPOutDiscReqs | 1.3.6.1.4.1.2.6.2.10.5.3.1.25 | Counter | read-only | Number of Discard Request packets sent on this link. |
| CTR ibmpppLCPOutEchoReps | 1.3.6.1.4.1.2.6.2.10.5.3.1.23 | Counter | read-only | Number of Echo Reply packets sent on this link. |
| CTR ibmpppLCPOutEchoReqs | 1.3.6.1.4.1.2.6.2.10.5.3.1.21 | Counter | read-only | Number of Echo Request packets sent on this link. |
| CTR ibmpppLCPOutOctets | 1.3.6.1.4.1.2.6.2.10.5.3.1.6 | Counter | read-only | The number of octets all in LCP packets sent on the link identified by ibmpppLCPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted. |
| CTR ibmpppLCPOutPackets | 1.3.6.1.4.1.2.6.2.10.5.3.1.5 | Counter | read-only | The number of LCP packets sent on the link identified by ibmpppLCPLinkNumber. |
| CTR ibmpppLCPOutTAs | 1.3.6.1.4.1.2.6.2.10.5.3.1.17 | Counter | read-only | Number of Terminate Acknowledge packets sent on this link. |
| CTR ibmpppLCPOutTRs | 1.3.6.1.4.1.2.6.2.10.5.3.1.15 | Counter | read-only | Number of Terminate Request packets sent on this link. |
| CTR ibmpppLCPRejects | 1.3.6.1.4.1.2.6.2.10.5.3.1.2 | Counter | read-only | The number of Protocol Reject Messages received when attempting to send an LCP packet over the link identified by ibmpppLCPLinkNumber. This really ought not to happen. |
| ibmpppLCPTable | 1.3.6.1.4.1.2.6.2.10.5.3 | not-accessible | A table containing specific information for the running of LCP over PPP in this managed object. An entry in this table is uniquely identified by the ibmpppLCPLinkNumber value comprised by said entry. | |
| INT ibmpppLinkACCompression | 1.3.6.1.4.1.2.6.2.10.2.1.10 | INTEGER | read-only | Indicates the Address/Control Field compression that has been configured on the link. Receive-only(1) indicates that this node can receive compressed packets but won't send them. Send-only(2) indicates that this node will send compressed packets but can not receive them. Receive-and- send(3) indicates that the node will send and can receive compressed packets. None(4) indicates that this node will neither send nor receive compressed packets. See section 2.7, on page 13 of RFC 1172. The IBM 6611 Network Processor always provides a value of none(4) for this object. |
| CTR ibmpppLinkBadAddresses | 1.3.6.1.4.1.2.6.2.10.3.1.2 | Counter | read-only | The number of packets received with an incorrect Address Field. See section 3.1, Page 5, 'Address Field' of RFC 1171. |
| CTR ibmpppLinkBadControls | 1.3.6.1.4.1.2.6.2.10.3.1.4 | Counter | read-only | The number of packets received on this link with an incorrect Control Field. See Section 3.1, Page 5, 'Flag Sequence' of RFC 1171. |
| CTR ibmpppLinkBadCRCs | 1.3.6.1.4.1.2.6.2.10.3.1.10 | Counter | read-only | The number of received packets that have been discarded due to having an incorrect CRC. |
| TIK ibmpppLinkChangeTime | 1.3.6.1.4.1.2.6.2.10.2.1.5 | TimeTicks | read-only | The value of sysUpTime when the state of the link automaton last changed. |
| INT ibmpppLinkCommand | 1.3.6.1.4.1.2.6.2.10.1.1.10 | INTEGER | read-only | See section 4.14 on page 13 of RFC 1171. Reading from this variable will return no-op(1). The IBM 6611 Network Processor always provides a value of no-op(1) for this object. |
| CTR ibmpppLinkConfigTimeouts | 1.3.6.1.4.1.2.6.2.10.3.1.11 | Counter | read-only | The number of Configure Request packets that have timed out. |
| ibmpppLinkControlEntry | 1.3.6.1.4.1.2.6.2.10.1.1 | not-accessible | Management control information about a particular PPP Link. | |
| INT ibmpppLinkControlIndex | 1.3.6.1.4.1.2.6.2.10.1.1.1 | INTEGER | read-only | A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that identified by the same value of an ifIndex object instance. The value for each link must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. |
| ibmpppLinkControlTable | 1.3.6.1.4.1.2.6.2.10.1 | not-accessible | A table containing PPP-link specific control variables for this managed object. An entry in this table is uniquely identified by the ibmpppLinkControlIndex value comprised by said entry. | |
| INT ibmpppLinkCRCSize | 1.3.6.1.4.1.2.6.2.10.1.1.2 | INTEGER | read-only | Number of bits used in the CRC on this link. See section 3.1, 'Frame Check Sequence (FCS) Field' on page 5 of RFC 1171. Setting this object to a new value will have effect when this link is next restarted. |
| INT ibmpppLinkCurrentState | 1.3.6.1.4.1.2.6.2.10.2.1.3 | INTEGER | read-only | The current state of the link automaton. See section 4.1.3. 'State Transition Table' on page 13 of RFC 1171. |
| ibmpppLinkErrorsEntry | 1.3.6.1.4.1.2.6.2.10.3.1 | not-accessible | Error information about a particular PPP Link. | |
| INT ibmpppLinkErrorsIndex | 1.3.6.1.4.1.2.6.2.10.3.1.1 | INTEGER | read-only | A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that identified by the same value of an ifIndex object instance. The value for each link must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. |
| ibmpppLinkErrorsTable | 1.3.6.1.4.1.2.6.2.10.3 | not-accessible | A table containing PPP-link specific statistical information for this managed object. An entry in this table is uniquely identified by the ibmpppLinkErrorsIndex value comprised by said entry. | |
| CTR ibmpppLinkInRxOctets | 1.3.6.1.4.1.2.6.2.10.4.1.9 | Counter | read-only | The current value of the In-Rx-Octets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| CTR ibmpppLinkInRxPackets | 1.3.6.1.4.1.2.6.2.10.4.1.7 | Counter | read-only | The current value of the In-Rx-Packets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| CTR ibmpppLinkInTxLQRs | 1.3.6.1.4.1.2.6.2.10.4.1.2 | Counter | read-only | The current value of In-Tx-LQRs used in Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| CTR ibmpppLinkInTxOctets | 1.3.6.1.4.1.2.6.2.10.4.1.5 | Counter | read-only | The current value of the In-Tx-Octets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| CTR ibmpppLinkInTxPackets | 1.3.6.1.4.1.2.6.2.10.4.1.3 | Counter | read-only | The current value of the In-Tx-Packets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| CTR ibmpppLinkInvalidProtocols | 1.3.6.1.4.1.2.6.2.10.3.1.7 | Counter | read-only | The number of times that a packet has been received with an invalid Protocol specified in the Protocol Field. An invalid Protocol is one which does not conform to the requirements of section 3.1, page 5 of RFC 1171. |
| OCT ibmpppLinkLastBadAddress | 1.3.6.1.4.1.2.6.2.10.3.1.3 | OCTET STRING | read-only | The most recent incorrect address received on this link. |
| OCT ibmpppLinkLastBadControl | 1.3.6.1.4.1.2.6.2.10.3.1.5 | OCTET STRING | read-only | The most recent incorrect Control Field received on this link. |
| CTR ibmpppLinkLastInRxOctets | 1.3.6.1.4.1.2.6.2.10.4.1.10 | Counter | read-only | The current value of the Last-In-Rx-Octets-Ctr counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| CTR ibmpppLinkLastInRxPackets | 1.3.6.1.4.1.2.6.2.10.4.1.8 | Counter | read-only | The current value of the Last-In-Rx-Packets-Ctr counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| OCT ibmpppLinkLastInvalidProtocol | 1.3.6.1.4.1.2.6.2.10.3.1.8 | OCTET STRING | read-only | The most recently received invalid Protocol. |
| CTR ibmpppLinkLastOutTxOctets | 1.3.6.1.4.1.2.6.2.10.4.1.6 | Counter | read-only | The current value of the Last-Out-Tx-Octets-Counter counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| CTR ibmpppLinkLastOutTxPackets | 1.3.6.1.4.1.2.6.2.10.4.1.4 | Counter | read-only | The current value of the Last-Out-Tx-Packets-Ctr counter used bu Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| OCT ibmpppLinkLastUnknownProtocol | 1.3.6.1.4.1.2.6.2.10.3.1.6 | OCTET STRING | read-only | The most recently received unknown Protocol. An unknown Protocol is one which has a well-formed Protocol number, but which the PPP implementation does not know how to handle. |
| OCT ibmpppLinkLocalACCMap | 1.3.6.1.4.1.2.6.2.10.1.1.7 | OCTET STRING | read-only | The (ACC) Asynchronous-Control-Character-Map for this node. This is the ACC Map that the node on the other end of the link will use when building a packet to send to this node. See section 2.2, page 3, 'Async-Control- Character-Map' of RFC 1172. The IBM 6611 Network Processor always provides a value of zero for this object. |
| INT ibmpppLinkLocalMRU | 1.3.6.1.4.1.2.6.2.10.1.1.5 | INTEGER | read-only | The MRU (Maximum Receive Unit) of this node on the link. See section 2.1, page 2, 'Maximum Receive Unit' of RFC 1172. Changing this object will have effect when the link is next restarted. |
| INT ibmpppLinkLocalQualityPeriod | 1.3.6.1.4.1.2.6.2.10.2.1.7 | INTEGER | read-only | This is the maximum interval at which this node will transmit Link-Quality-Report Packets. See section 2.5, on page 10 of RFC 1172. This object is in units of microseconds. |
| INT ibmpppLinkMagicLoopCount | 1.3.6.1.4.1.2.6.2.10.1.1.9 | INTEGER | read-only | The number of times that this node will do a Magic Number Configuration before deciding that the link is looped back. 0 indicates that the node does not do Magic Number Configuration. -1 indicates that it tries forever. Changing this object takes effect the next time that the link is restarted. |
| INT ibmpppLinkMagicNumber | 1.3.6.1.4.1.2.6.2.10.2.1.6 | INTEGER | read-only | This node's Magic Number. See section 2.4, page 7, 'Magic Number' of RFC 1172. |
| INT ibmpppLinkMaxRestarts | 1.3.6.1.4.1.2.6.2.10.1.1.4 | INTEGER | read-only | The Max-Restarts parameter described in section 4.3, 'Timers and Counters' on page 20 of RFC 1171. |
| INT ibmpppLinkMeasurementsValid | 1.3.6.1.4.1.2.6.2.10.2.1.11 | INTEGER | read-only | The current value of the Measurements-Valid state variable used for Link-Quality Management. See section 3.5, page 19, of RFC 1172. |
| CTR ibmpppLinkPacketTooLongs | 1.3.6.1.4.1.2.6.2.10.3.1.9 | Counter | read-only | The number of received packets that have been discarded because their length exceeded the MRU. |
| OID ibmpppLinkPhysical | 1.3.6.1.4.1.2.6.2.10.2.1.13 | OBJECT IDENTIFIER | read-only | A reference to MIB definitions specific to the particular physical interface type (e.g. T1) being used by the PPP Link. If the agent is unable to obtain this information, the value of this object will be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value. |
| INT ibmpppLinkPreviousState | 1.3.6.1.4.1.2.6.2.10.2.1.4 | INTEGER | read-only | The immediately previous state of the link automaton. See section 4.1.3. 'State Transition Table' on page 13 of RFC 1171. |
| INT ibmpppLinkProtocolCompression | 1.3.6.1.4.1.2.6.2.10.2.1.9 | INTEGER | read-only | Indicates the Protocol compression that has been configured on the link. Receive-only(1) indicates that this node can receive compressed packets but won't send them. Send-only(2) indicates that this node will send compressed packets but can not receive them. Receive-and-send(3) indicates that the node will send and can receive compressed packets. None(4) indicates that this node will neither send nor receive compressed packets. See section 2.6, on page 11 of RFC 1172. The IBM 6611 Network Processor always provides a value of none(4) for this object. |
| INT ibmpppLinkQuality | 1.3.6.1.4.1.2.6.2.10.2.1.12 | INTEGER | read-only | The current quality of the link as declared by the nodes Link-Quality Management modules. No effort is made to define good or bad, nor the policy used to determine it. |
| ibmpppLinkQualityEntry | 1.3.6.1.4.1.2.6.2.10.4.1 | not-accessible | Link Quality Management information about a particular PPP Link. | |
| INT ibmpppLinkQualityIndex | 1.3.6.1.4.1.2.6.2.10.4.1.1 | INTEGER | read-only | A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that identified by the same value of an ifIndex object instance. The value for each link must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. |
| ibmpppLinkQualityTable | 1.3.6.1.4.1.2.6.2.10.4 | not-accessible | A table containing PPP-link specific statistical information for this managed object. An entry in this table is uniquely identified by the ibmpppLinkQualityIndex value comprised by said entry. | |
| OCT ibmpppLinkRemoteACCMap | 1.3.6.1.4.1.2.6.2.10.1.1.8 | OCTET STRING | read-only | The (ACC) Asynchronous-Control-Character-Map that this node uses when building a packet to send to the node on the other end of the link. See section 2.2, page 3, 'Async-Control-Character-Map' of RFC 1172. The IBM 6611 Network Processor always provides a value of zero for this object. |
| INT ibmpppLinkRemoteMRU | 1.3.6.1.4.1.2.6.2.10.1.1.6 | INTEGER | read-only | What this node believes is the MRU for the node on the other end of the link. See section 2.1, page 2, 'Maximum Receive Unit' of RFC 1172. Changing this object will immediately cause the local node to use the new MRU when transmitting packets. If this number is increased, then the sender MAY elect to use the new MRU. If the MRU is decreased then the sender MUST use the new MRU. |
| INT ibmpppLinkRemoteQualityPeriod | 1.3.6.1.4.1.2.6.2.10.2.1.8 | INTEGER | read-only | This is the maximum interval at which this node expects that the other node will transmit Link-Quality-Report Packets. See section 2.5, on page 10 of RFC 1172. This object is in units of microseconds. |
| INT ibmpppLinkRestartTimerValue | 1.3.6.1.4.1.2.6.2.10.1.1.3 | INTEGER | read-only | The value used for the Restart Timer. It is in units of hundredths of a second. See section 4.3, 'Timers and Counters' on page 20 of RFC 1171. |
| ibmpppLinkStatusEntry | 1.3.6.1.4.1.2.6.2.10.2.1 | not-accessible | Status information about a particular PPP Link. | |
| INT ibmpppLinkStatusIndex | 1.3.6.1.4.1.2.6.2.10.2.1.1 | INTEGER | read-only | A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that identified by the same value of an ifIndex object instance. The value for each link must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. |
| ibmpppLinkStatusTable | 1.3.6.1.4.1.2.6.2.10.2 | not-accessible | A table containing PPP-link status specific information for this managed object. An entry in this table is uniquely identified by the ibmpppLinkStatusIndex value comprised by said entry. | |
| CTR ibmpppLinkTerminateTimeouts | 1.3.6.1.4.1.2.6.2.10.3.1.12 | Counter | read-only | The number of Terminate Request packets that have timed out. |
| INT ibmpppLinkVersion | 1.3.6.1.4.1.2.6.2.10.2.1.2 | INTEGER | read-only | The version of LCP that is being run over this link (per RFC 1171). This value currently must be 1. |
| ibmpppProtocolTables | 1.3.6.1.4.1.2.6.2.10.5 | |||
| ibmProd | 1.3.6.1.4.1.2.6 | |||
| ibmptyqueue | 1.3.6.1.4.1.2.6.2.19.2 | |||
| CTR ibmPtyQueueingDiscards | 1.3.6.1.4.1.2.6.2.19.2.1.1.5 | Counter | read-only | Identifies the number of packets discarded from this queue due to a queue overflow. |
| ibmPtyQueueingEntry | 1.3.6.1.4.1.2.6.2.19.2.1.1 | not-accessible | Each entry defines the Link Bandwidth Allocation (LBA) and Queue Bandwidth Reservation (QBR) definitions for a specific transmission queue on a serial interface. Additionally, a counter is provided indicating the number of packets discarded on this queue due to a queue overflow. | |
| INT ibmPtyQueueingIfIndex | 1.3.6.1.4.1.2.6.2.19.2.1.1.1 | INTEGER | read-only | Defines the interface associated with this priority queue information. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group. |
| INT ibmPtyQueueingLBA | 1.3.6.1.4.1.2.6.2.19.2.1.1.3 | INTEGER | read-only | Link Bandwidth Allocation (LBA): Identifies the number of packets that will be transmitted from this queue before a lower priority queue will be serviced. |
| INT ibmPtyQueueingQBR | 1.3.6.1.4.1.2.6.2.19.2.1.1.4 | INTEGER | read-only | Queue Bandwidth Reservation (QBR): Identifies the percentage of buffer space on a serial adapter that is allotted to a particular queue for transmission of packets. The sum of all QBR values on an interface must add up to 100%. |
| INT ibmPtyQueueingQnum | 1.3.6.1.4.1.2.6.2.19.2.1.1.2 | INTEGER | read-only | Identifies the priority queue associated with this interface and its priority queue information. |
| ibmPtyQueueingTable | 1.3.6.1.4.1.2.6.2.19.2.1 | not-accessible | This table provides information on a specific transmission queue of a serial interface. Information includes: - Link Bandwidth Allocation (LBA): Identifies the number of packets transmitted from a particular queue before a lower priority transmission queue will be serviced. - Queue Bandwidth Reservation (QBR): Identifies the percentage of buffer space on a serial adapter that is allotted to a particular queue for transmission of packets. | |
| INT ibmRIFFilterIfIndex | 1.3.6.1.4.1.2.6.2.7.8.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmRIFFilterInBcastType | 1.3.6.1.4.1.2.6.2.7.8.1.1.2 | INTEGER | read-only | For the incoming routing information field filter table, determines what type of frames will be filtered. |
| INT ibmRIFFilterInBridgeMask | 1.3.6.1.4.1.2.6.2.7.8.2.1.5 | INTEGER | read-only | Mask to allow ibmRIFFilterInBridgeNumber to be used as a range of values. |
| INT ibmRIFFilterInBridgeNumber | 1.3.6.1.4.1.2.6.2.7.8.2.1.4 | INTEGER | read-only | Indicates which bridge number to filter. |
| ibmRIFFilterInEntry | 1.3.6.1.4.1.2.6.2.7.8.2.1 | not-accessible | Filtering information for a single routing information field on a single interface. | |
| INT ibmRIFFilterInFilterType | 1.3.6.1.4.1.2.6.2.7.8.1.1.4 | INTEGER | read-only | For the incoming routing information filter table, determines whether the entries are permit or deny entries. |
| ibmRIFFilterInfoEntry | 1.3.6.1.4.1.2.6.2.7.8.1.1 | not-accessible | Routing information field filtering information for a single interface. | |
| ibmRIFFilterInfoTable | 1.3.6.1.4.1.2.6.2.7.8.1 | not-accessible | Table of routing information field filtering information. | |
| INT ibmRIFFilterInIfIndex | 1.3.6.1.4.1.2.6.2.7.8.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| CTR ibmRIFFilterInNotForwarded | 1.3.6.1.4.1.2.6.2.7.8.1.1.6 | Counter | read-only | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| INT ibmRIFFilterInRingMask | 1.3.6.1.4.1.2.6.2.7.8.2.1.3 | INTEGER | read-only | Mask to allow ibmRIFFilterInRingNumber to be used as a range of values. |
| INT ibmRIFFilterInRingNumber | 1.3.6.1.4.1.2.6.2.7.8.2.1.2 | INTEGER | read-only | Indicates which ring number to filter. |
| INT ibmRIFFilterInRouteDesignator | 1.3.6.1.4.1.2.6.2.7.8.2.1.6 | INTEGER | read-only | Indicates which route designators in the routing information field are to be used for filtering. |
| ibmRIFFilterInTable | 1.3.6.1.4.1.2.6.2.7.8.2 | not-accessible | Table of routing information field filtering information for incoming frames. | |
| INT ibmRIFFilterOutBcastType | 1.3.6.1.4.1.2.6.2.7.8.1.1.3 | INTEGER | read-only | For the outgoing routing information field filter table, determines what type of frames will be filtered. |
| INT ibmRIFFilterOutBridgeMask | 1.3.6.1.4.1.2.6.2.7.8.3.1.5 | INTEGER | read-only | Mask to allow ibmRIFFilterOutBridgeNumber to be used as a range of values. |
| INT ibmRIFFilterOutBridgeNumber | 1.3.6.1.4.1.2.6.2.7.8.3.1.4 | INTEGER | read-only | Indicates which bridge number to filter. |
| ibmRIFFilterOutEntry | 1.3.6.1.4.1.2.6.2.7.8.3.1 | not-accessible | Filtering information for a single routing information field on a single interface. | |
| INT ibmRIFFilterOutFilterType | 1.3.6.1.4.1.2.6.2.7.8.1.1.5 | INTEGER | read-only | For the outgoing routing information field filter table, determines whether the entries are permit or deny entries. |
| INT ibmRIFFilterOutIfIndex | 1.3.6.1.4.1.2.6.2.7.8.3.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| CTR ibmRIFFilterOutNotForwarded | 1.3.6.1.4.1.2.6.2.7.8.1.1.7 | Counter | read-only | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| INT ibmRIFFilterOutRingMask | 1.3.6.1.4.1.2.6.2.7.8.3.1.3 | INTEGER | read-only | Mask to allow ibmRIFFilterOutRingNumber to be used as a range of values. |
| INT ibmRIFFilterOutRingNumber | 1.3.6.1.4.1.2.6.2.7.8.3.1.2 | INTEGER | read-only | Indicates which ring number to filter. |
| INT ibmRIFFilterOutRouteDesignator | 1.3.6.1.4.1.2.6.2.7.8.3.1.6 | INTEGER | read-only | Indicates which route designators in the routing information field are to be used for filtering. |
| ibmRIFFilterOutTable | 1.3.6.1.4.1.2.6.2.7.8.3 | not-accessible | Table of routing information field filtering information for outgoing frames. | |
| INT ibmringFilterIfIndex | 1.3.6.1.4.1.2.6.2.7.4.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmringFilterInBcastType | 1.3.6.1.4.1.2.6.2.7.4.1.1.2 | INTEGER | read-only | For the incoming ring filter table, determines what type of frames will be filtered. |
| ibmringFilterInEntry | 1.3.6.1.4.1.2.6.2.7.4.2.1 | not-accessible | Filtering information for a single ring number on a single interface. | |
| INT ibmringFilterInFilterType | 1.3.6.1.4.1.2.6.2.7.4.1.1.4 | INTEGER | read-only | For the incoming ring filter table, determines whether the entries are permit or deny entries. |
| ibmringFilterInfoEntry | 1.3.6.1.4.1.2.6.2.7.4.1.1 | not-accessible | Ring filtering information for a single interface. | |
| ibmringFilterInfoTable | 1.3.6.1.4.1.2.6.2.7.4.1 | not-accessible | Table of ring filtering information. | |
| INT ibmringFilterInIfIndex | 1.3.6.1.4.1.2.6.2.7.4.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmringFilterInMask | 1.3.6.1.4.1.2.6.2.7.4.2.1.3 | INTEGER | read-only | Mask to allow ibmringFilterInNumber to be used as a range of values. |
| CTR ibmringFilterInNotForwarded | 1.3.6.1.4.1.2.6.2.7.4.1.1.6 | Counter | read-only | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| INT ibmringFilterInNumber | 1.3.6.1.4.1.2.6.2.7.4.2.1.2 | INTEGER | read-only | Indicates which ring number to filter. |
| ibmringFilterInTable | 1.3.6.1.4.1.2.6.2.7.4.2 | not-accessible | Table of ring number filtering information for incoming frames. | |
| INT ibmringFilterOutBcastType | 1.3.6.1.4.1.2.6.2.7.4.1.1.3 | INTEGER | read-only | For the outgoing ring filter table, determines what type of frames will be filtered. |
| ibmringFilterOutEntry | 1.3.6.1.4.1.2.6.2.7.4.3.1 | not-accessible | Filtering information for a single ring number on a single interface. | |
| INT ibmringFilterOutFilterType | 1.3.6.1.4.1.2.6.2.7.4.1.1.5 | INTEGER | read-only | For the outgoing ring filter table, determines whether the entries are permit or deny entries. |
| INT ibmringFilterOutIfIndex | 1.3.6.1.4.1.2.6.2.7.4.3.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmringFilterOutMask | 1.3.6.1.4.1.2.6.2.7.4.3.1.3 | INTEGER | read-only | Mask to allow ibmringFilterOutNumber to be used as a range of values. |
| CTR ibmringFilterOutNotForwarded | 1.3.6.1.4.1.2.6.2.7.4.1.1.7 | Counter | read-only | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| INT ibmringFilterOutNumber | 1.3.6.1.4.1.2.6.2.7.4.3.1.2 | INTEGER | read-only | Indicates which ring number to filter. |
| ibmringFilterOutTable | 1.3.6.1.4.1.2.6.2.7.4.3 | not-accessible | Table of ring number filtering information for outgoing frames. | |
| ibmrpq | 1.3.6.1.4.1.2.6.2.14 | |||
| INT ibmsapFilterIfIndex | 1.3.6.1.4.1.2.6.2.7.2.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmsapFilterIn | 1.3.6.1.4.1.2.6.2.7.2.1.1.4 | OCTET STRING | read-only | A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an incoming frame with that SAP is to be forwarded. |
| INT ibmsapFilterInBcastType | 1.3.6.1.4.1.2.6.2.7.2.1.1.2 | INTEGER | read-only | For the incoming SAP filter table, determines what type of frames will be filtered. |
| ibmsapFilterInfoEntry | 1.3.6.1.4.1.2.6.2.7.2.1.1 | not-accessible | SAP filtering information for a single interface. | |
| ibmsapFilterInfoTable | 1.3.6.1.4.1.2.6.2.7.2.1 | not-accessible | Table of SAP filtering information. | |
| CTR ibmsapFilterInNotForwarded | 1.3.6.1.4.1.2.6.2.7.2.1.1.6 | Counter | read-only | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| OCT ibmsapFilterOut | 1.3.6.1.4.1.2.6.2.7.2.1.1.5 | OCTET STRING | read-only | A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an outgoing frame with that SAP is to be forwarded. |
| INT ibmsapFilterOutBcastType | 1.3.6.1.4.1.2.6.2.7.2.1.1.3 | INTEGER | read-only | For the outgoing SAP filter table, determines what type of frames will be filtered. |
| CTR ibmsapFilterOutNotForwarded | 1.3.6.1.4.1.2.6.2.7.2.1.1.7 | Counter | read-only | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| INT ibmsapFilterType | 1.3.6.1.4.1.2.6.2.7.2.1.1.8 | INTEGER | read-only | The type of entry, either sr or tb. |
| ibmSelectNet | 1.3.6.1.4.1.2.6.2.16.1 | |||
| ibmSelectNetEntry | 1.3.6.1.4.1.2.6.2.16.1.1.1 | not-accessible | The description of a selected network definition. | |
| ibmSelectNetFilter | 1.3.6.1.4.1.2.6.2.16.4 | |||
| ibmSelectNetFilterEntry | 1.3.6.1.4.1.2.6.2.16.4.1.1 | not-accessible | The description of a filter for this selected network definition. | |
| INT ibmSelectNetFilterIndex | 1.3.6.1.4.1.2.6.2.16.4.1.1.1 | INTEGER | read-only | An identifier that is unique to the selected network definition to which this filter applies. This value is the same as that provided by ibmSelectNetIndex. |
| OCT ibmSelectNetFilterNetEnd | 1.3.6.1.4.1.2.6.2.16.4.1.1.3 | OCTET STRING | read-only | The network address that ends the range for this destination network filter. This address is a two octet DDP network address in network byte order. |
| OCT ibmSelectNetFilterNetStart | 1.3.6.1.4.1.2.6.2.16.4.1.1.2 | OCTET STRING | read-only | The network address that starts the range for this destination network filter. This address is a two octet DDP network address in network byte order. |
| ibmSelectNetFilterTable | 1.3.6.1.4.1.2.6.2.16.4.1 | not-accessible | The list of selected network destination network filter entries. | |
| INT ibmSelectNetIndex | 1.3.6.1.4.1.2.6.2.16.1.1.1.1 | INTEGER | read-only | An identifier that is unique to the default zone name that is present in this entry. |
| OCT ibmSelectNetInterfaceNetStart | 1.3.6.1.4.1.2.6.2.16.1.1.1.5 | OCTET STRING | read-only | The network address that starts the range for the interface associated with this definition. |
| OCT ibmSelectNetNetEnd | 1.3.6.1.4.1.2.6.2.16.1.1.1.4 | OCTET STRING | read-only | The network address that ends the range for this entry. This address is a two octet DDP network address in network byte order. |
| OCT ibmSelectNetNetStart | 1.3.6.1.4.1.2.6.2.16.1.1.1.3 | OCTET STRING | read-only | The network address that starts the range for this entry. This address is a two octet DDP network address in network byte order. |
| ibmSelectNetTable | 1.3.6.1.4.1.2.6.2.16.1.1 | not-accessible | The list of selected network definition entries. | |
| OCT ibmSelectNetZone | 1.3.6.1.4.1.2.6.2.16.1.1.1.2 | OCTET STRING | read-only | The ASCII default zone name of this entry. |
| INT ibmsnapFilterIfIndex | 1.3.6.1.4.1.2.6.2.7.3.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| ibmsnapFilterInEntry | 1.3.6.1.4.1.2.6.2.7.3.2.1 | not-accessible | Filtering information for a single SNAP value on a single interface. | |
| INT ibmsnapFilterInFilterType | 1.3.6.1.4.1.2.6.2.7.3.1.1.2 | INTEGER | read-only | For the incoming SNAP filter table, determines whether the entries are permit or deny entries. |
| ibmsnapFilterInfoEntry | 1.3.6.1.4.1.2.6.2.7.3.1.1 | not-accessible | SNAP filtering information for a single interface. | |
| ibmsnapFilterInfoTable | 1.3.6.1.4.1.2.6.2.7.3.1 | not-accessible | Table of SNAP filtering information. Note that SNAP filtering only comes into play if packets with source SAP 0xAA are being forwarded. | |
| INT ibmsnapFilterInIfIndex | 1.3.6.1.4.1.2.6.2.7.3.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmsnapFilterInMask | 1.3.6.1.4.1.2.6.2.7.3.2.1.3 | INTEGER | read-only | Mask to allow ibmsnapFilterInValue to be used as a range of values. |
| CTR ibmsnapFilterInNotForwarded | 1.3.6.1.4.1.2.6.2.7.3.1.1.4 | Counter | read-only | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| ibmsnapFilterInTable | 1.3.6.1.4.1.2.6.2.7.3.2 | not-accessible | Table of SNAP type filtering information for incoming frames. Note that the entries in this table only come into play if packets with source SAP 0xAA are being forwarded. | |
| INT ibmsnapFilterInType | 1.3.6.1.4.1.2.6.2.7.3.2.1.4 | INTEGER | read-only | The type of entry, either sr or tb. |
| INT ibmsnapFilterInValue | 1.3.6.1.4.1.2.6.2.7.3.2.1.2 | INTEGER | read-only | Indicates which SNAP value to filter. |
| ibmsnapFilterOutEntry | 1.3.6.1.4.1.2.6.2.7.3.3.1 | not-accessible | Filtering information for a single SNAP value on a single interface. | |
| INT ibmsnapFilterOutFilterType | 1.3.6.1.4.1.2.6.2.7.3.1.1.3 | INTEGER | read-only | For the outgoing SNAP filter table, determines whether the entries are permit or deny entries. |
| INT ibmsnapFilterOutIfIndex | 1.3.6.1.4.1.2.6.2.7.3.3.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmsnapFilterOutMask | 1.3.6.1.4.1.2.6.2.7.3.3.1.3 | INTEGER | read-only | Mask to allow ibmsnapFilterOutValue to be used as a range of values. |
| CTR ibmsnapFilterOutNotForwarded | 1.3.6.1.4.1.2.6.2.7.3.1.1.5 | Counter | read-only | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| ibmsnapFilterOutTable | 1.3.6.1.4.1.2.6.2.7.3.3 | not-accessible | Table of SNAP filtering information for outgoing frames. Note that the entries in this table only come into play if packets with source SAP 0xAA are being forwarded. | |
| INT ibmsnapFilterOutType | 1.3.6.1.4.1.2.6.2.7.3.3.1.4 | INTEGER | read-only | The type of entry, either sr or tb. |
| INT ibmsnapFilterOutValue | 1.3.6.1.4.1.2.6.2.7.3.3.1.2 | INTEGER | read-only | Indicates which SNAP values to filter. |
| INT ibmsnapFilterType | 1.3.6.1.4.1.2.6.2.7.3.1.1.6 | INTEGER | read-only | The type of entry, either sr or tb. |
| ibmsnmp | 1.3.6.1.4.1.2.6.2.6 | |||
| ibmSubagents | 1.3.6.1.4.1.2.6.2.1 | |||
| ibmswvpd | 1.3.6.1.4.1.2.6.2.4.2 | |||
| ibmsysInfo | 1.3.6.1.4.1.2.6.2.4.4.7 | |||
| ibmsysMBUFs | 1.3.6.1.4.1.2.6.2.4.4.7.1 | |||
| CTR ibmsysMBUFsDelayedRequests | 1.3.6.1.4.1.2.6.2.4.4.7.1.5 | Counter | read-only | Number of MBUF requests that were delayed due to lack of resources. |
| CTR ibmsysMBUFsDeniedRequests | 1.3.6.1.4.1.2.6.2.4.4.7.1.4 | Counter | read-only | Number of MBUF requests that were denied due to lack of resources. |
| GAU ibmsysMBUFsInUses | 1.3.6.1.4.1.2.6.2.4.4.7.1.1 | Gauge | read-only | Number of kernel MBUFs currently in use. |
| GAU ibmsysMBUFsKbytes | 1.3.6.1.4.1.2.6.2.4.4.7.1.2 | Gauge | read-only | Kbytes of MBUFs currently allocated to the network. |
| GAU ibmsysMBUFsPercents | 1.3.6.1.4.1.2.6.2.4.4.7.1.3 | Gauge | read-only | Percentage of total MBUFs available that are currently allocated to the network |
| ibmsysPageSpace | 1.3.6.1.4.1.2.6.2.4.4.7.2 | |||
| GAU ibmsysPageSpaceInUse | 1.3.6.1.4.1.2.6.2.4.4.7.2.2 | Gauge | read-only | Total number of paging space pages currently in use on the 6611. A page is defined as 4096 bytes, so for example, an ibmsysPageSpaceInUse value of 8839 equals 8839 * 4096 = 36204544 bytes of paging space in use. |
| INT ibmsysPageSpaceTotal | 1.3.6.1.4.1.2.6.2.4.4.7.2.1 | INTEGER | read-only | Total number of paging space pages available on the 6611. A page is defined as 4096 bytes, so for example, an ibmsysPageSpaceTotal value of 12288 equals 12288 * 4096 = 50331648 bytes of paging space. |
| ibmsysRealMem | 1.3.6.1.4.1.2.6.2.4.4.7.3 | |||
| GAU ibmsysRealMemFree | 1.3.6.1.4.1.2.6.2.4.4.7.3.3 | Gauge | read-only | Total number of real memory frames currently free on the 6611. A frame is defined as 4096 bytes, so for example, an ibmsysRealMemFree value of 71 equals 71 * 4096 = 290816 bytes of real memory free. |
| GAU ibmsysRealMemInUse | 1.3.6.1.4.1.2.6.2.4.4.7.3.2 | Gauge | read-only | Total number of real memory frames currently in use on the 6611. A frame is defined as 4096 bytes, so for example, an ibmsysRealMemInUse value of 4025 equals 4025 * 4096 = 16486400 bytes of real memory in use. |
| INT ibmsysRealMemSize | 1.3.6.1.4.1.2.6.2.4.4.7.3.1 | INTEGER | read-only | Total number of real memory frames available on the 6611. A frame is defined as 4096 bytes, so for example, an ibmsysRealMemSize value of 4096 equals 4096 * 4096 = 16777216 bytes of real memory. |
| ibmsystem | 1.3.6.1.4.1.2.6.2.4 | |||
| ibmtb | 1.3.6.1.4.1.2.6.2.15 | |||
| ibmtbEthTypeFilters | 1.3.6.1.4.1.2.6.2.15.7 | |||
| INT ibmtbEthTypeFiltIfIndex | 1.3.6.1.4.1.2.6.2.15.7.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| ibmtbEthTypeFiltInEntry | 1.3.6.1.4.1.2.6.2.15.7.2.1 | not-accessible | Filtering information for a single Ethernet type on a single interface. | |
| INT ibmtbEthTypeFiltInFilterType | 1.3.6.1.4.1.2.6.2.15.7.1.1.2 | INTEGER | read-only | For the incoming Ethernet type filter table, determines whether the entries are permit or deny entries. |
| ibmtbEthTypeFiltInfoEntry | 1.3.6.1.4.1.2.6.2.15.7.1.1 | not-accessible | Ethernet type filtering information for a single interface. | |
| ibmtbEthTypeFiltInfoTable | 1.3.6.1.4.1.2.6.2.15.7.1 | not-accessible | Table of Ethernet type filtering information. Note that this filtering only applies to: 1) The Ethernet TYPE field for DIX version 2 frames. 2) The Ethernet TYPE field contained in the SNAP header of 802.3 frames, if the frame contains a SNAP header (SSAP = DSAP = 0xAA) | |
| INT ibmtbEthTypeFiltInIfIndex | 1.3.6.1.4.1.2.6.2.15.7.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmtbEthTypeFiltInMask | 1.3.6.1.4.1.2.6.2.15.7.2.1.3 | OCTET STRING | read-only | Mask to allow ibmtbEthTypeFiltInValue to be used as a range of values. |
| CTR ibmtbEthTypeFiltInNotForwarded | 1.3.6.1.4.1.2.6.2.15.7.1.1.4 | Counter | read-only | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| ibmtbEthTypeFiltInTable | 1.3.6.1.4.1.2.6.2.15.7.2 | not-accessible | Table of Ethernet type filtering information for incoming frames. Note that this filtering only applies to: 1) The Ethernet TYPE field for DIX version 2 frames. 2) The Ethernet TYPE field contained in the SNAP header of 802.3 frames, if the frame contains a SNAP header (SSAP = DSAP = 0xAA) | |
| OCT ibmtbEthTypeFiltInValue | 1.3.6.1.4.1.2.6.2.15.7.2.1.2 | OCTET STRING | read-only | Indicates which Ethernet type to filter. |
| ibmtbEthTypeFiltOutEntry | 1.3.6.1.4.1.2.6.2.15.7.3.1 | not-accessible | Filtering information for a single Ethernet type on a single interface. | |
| INT ibmtbEthTypeFiltOutFilterType | 1.3.6.1.4.1.2.6.2.15.7.1.1.3 | INTEGER | read-only | For the outgoing Ethernet type filter table, determines whether the entries are permit or deny entries. |
| INT ibmtbEthTypeFiltOutIfIndex | 1.3.6.1.4.1.2.6.2.15.7.3.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmtbEthTypeFiltOutMask | 1.3.6.1.4.1.2.6.2.15.7.3.1.3 | OCTET STRING | read-only | Mask to allow ibmtbEthTypeFiltOutValue to be used as a range of values. |
| CTR ibmtbEthTypeFiltOutNotForwarded | 1.3.6.1.4.1.2.6.2.15.7.1.1.5 | Counter | read-only | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| ibmtbEthTypeFiltOutTable | 1.3.6.1.4.1.2.6.2.15.7.3 | not-accessible | Table of Ethernet type filtering information for outgoing frames. Note that this filtering only applies to: 1) The Ethernet TYPE field for DIX version 2 frames. 2) The Ethernet TYPE field contained in the SNAP header of 802.3 frames, if the frame contains a SNAP header (SSAP = DSAP = 0xAA) | |
| OCT ibmtbEthTypeFiltOutValue | 1.3.6.1.4.1.2.6.2.15.7.3.1.2 | OCTET STRING | read-only | Indicates which Ethernet type to filter. |
| ibmtbFiltOrderInEntry | 1.3.6.1.4.1.2.6.2.15.9.1.1 | not-accessible | Filter order information for incoming frames. | |
| INT ibmtbFiltOrderInIfIndex | 1.3.6.1.4.1.2.6.2.15.9.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| STR ibmtbFiltOrderInName | 1.3.6.1.4.1.2.6.2.15.9.1.1.3 | DisplayString | read-only | The name of the filter applied to incoming frames that is associated with the priority, ibmtbFiltOrderInPriority. |
| INT ibmtbFiltOrderInPriority | 1.3.6.1.4.1.2.6.2.15.9.1.1.2 | INTEGER | read-only | The priority of when a filter is applied to an incoming frame. A value of 1 signifies that it is applied first. |
| ibmtbFiltOrderInTable | 1.3.6.1.4.1.2.6.2.15.9.1 | not-accessible | Table of information describing which order the filters are applied for incoming frames. | |
| ibmtbFiltOrderOutEntry | 1.3.6.1.4.1.2.6.2.15.9.2.1 | not-accessible | Filter order information for outgoing frames. | |
| INT ibmtbFiltOrderOutIfIndex | 1.3.6.1.4.1.2.6.2.15.9.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| STR ibmtbFiltOrderOutName | 1.3.6.1.4.1.2.6.2.15.9.2.1.3 | DisplayString | read-only | The name of the filter applied to outgoing frames that is associated with the priority, ibmtbFiltOrderOutPriority. |
| INT ibmtbFiltOrderOutPriority | 1.3.6.1.4.1.2.6.2.15.9.2.1.2 | INTEGER | read-only | The priority of when a filter is applied to an outgoing frame. A value of 1 signifies that it is applied first. |
| ibmtbFiltOrderOutTable | 1.3.6.1.4.1.2.6.2.15.9.2 | not-accessible | Table of information describing which order the filters are applied for outgoing frames. | |
| ibmtbFiltOrderTable | 1.3.6.1.4.1.2.6.2.15.9 | |||
| ibmtbMACAddressFilters | 1.3.6.1.4.1.2.6.2.15.5 | |||
| INT ibmtbmacFiltIfIndex | 1.3.6.1.4.1.2.6.2.15.5.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmtbmacFiltInDestAddress | 1.3.6.1.4.1.2.6.2.15.5.2.1.4 | OCTET STRING | read-only | MAC destination address to be filtered. |
| OCT ibmtbmacFiltInDestMask | 1.3.6.1.4.1.2.6.2.15.5.2.1.5 | OCTET STRING | read-only | Mask to allow ibmtbmacFiltInDestAddress to be used as a range of values. |
| ibmtbmacFiltInEntry | 1.3.6.1.4.1.2.6.2.15.5.2.1 | not-accessible | Filtering information for incoming frames. | |
| INT ibmtbmacFiltInFilterType | 1.3.6.1.4.1.2.6.2.15.5.1.1.2 | INTEGER | read-only | For the incoming filter table, determines whether the entries are permit or deny entries. |
| ibmtbmacFiltInfoEntry | 1.3.6.1.4.1.2.6.2.15.5.1.1 | not-accessible | MAC address filtering information for a single interface. | |
| ibmtbmacFiltInfoTable | 1.3.6.1.4.1.2.6.2.15.5.1 | not-accessible | Table of MAC address filtering information. | |
| INT ibmtbmacFiltInIfIndex | 1.3.6.1.4.1.2.6.2.15.5.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| CTR ibmtbmacFiltInNotForwarded | 1.3.6.1.4.1.2.6.2.15.5.1.1.4 | Counter | read-only | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| OCT ibmtbmacFiltInSrcAddress | 1.3.6.1.4.1.2.6.2.15.5.2.1.2 | OCTET STRING | read-only | MAC source address to be filtered. |
| OCT ibmtbmacFiltInSrcMask | 1.3.6.1.4.1.2.6.2.15.5.2.1.3 | OCTET STRING | read-only | Mask to allow ibmtbmacFiltInSrcAddress to be used as a range of values. |
| ibmtbmacFiltInTable | 1.3.6.1.4.1.2.6.2.15.5.2 | not-accessible | Table of MAC address filtering information for incoming frames. | |
| OCT ibmtbmacFiltOutDestAddress | 1.3.6.1.4.1.2.6.2.15.5.3.1.4 | OCTET STRING | read-only | MAC destination address to be filtered. |
| OCT ibmtbmacFiltOutDestMask | 1.3.6.1.4.1.2.6.2.15.5.3.1.5 | OCTET STRING | read-only | Mask to allow ibmtbmacFiltOutDestAddress to be used as a range of values. |
| ibmtbmacFiltOutEntry | 1.3.6.1.4.1.2.6.2.15.5.3.1 | not-accessible | Filtering information for outgoing frames. | |
| INT ibmtbmacFiltOutFilterType | 1.3.6.1.4.1.2.6.2.15.5.1.1.3 | INTEGER | read-only | For the outgoing filter table, determines whether the entries are permit or deny entries. |
| INT ibmtbmacFiltOutIfIndex | 1.3.6.1.4.1.2.6.2.15.5.3.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| CTR ibmtbmacFiltOutNotForwarded | 1.3.6.1.4.1.2.6.2.15.5.1.1.5 | Counter | read-only | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| OCT ibmtbmacFiltOutSrcAddress | 1.3.6.1.4.1.2.6.2.15.5.3.1.2 | OCTET STRING | read-only | MAC source address to be filtered. |
| OCT ibmtbmacFiltOutSrcMask | 1.3.6.1.4.1.2.6.2.15.5.3.1.3 | OCTET STRING | read-only | Mask to allow ibmtbmacFiltOutSrcAddress to be used as a range of values. |
| ibmtbmacFiltOutTable | 1.3.6.1.4.1.2.6.2.15.5.3 | not-accessible | Table of MAC address filtering information for outgoing frames. | |
| ibmtbSAPFilters | 1.3.6.1.4.1.2.6.2.15.6 | |||
| INT ibmtbsapFiltIfIndex | 1.3.6.1.4.1.2.6.2.15.6.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmtbsapFiltIn | 1.3.6.1.4.1.2.6.2.15.6.1.1.2 | OCTET STRING | read-only | A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an incoming frame with that SAP is to be forwarded. |
| ibmtbsapFiltInfoEntry | 1.3.6.1.4.1.2.6.2.15.6.1.1 | not-accessible | SAP filtering information for a single interface. | |
| ibmtbsapFiltInfoTable | 1.3.6.1.4.1.2.6.2.15.6.1 | not-accessible | Table of SAP filtering information. | |
| CTR ibmtbsapFiltInNotForwarded | 1.3.6.1.4.1.2.6.2.15.6.1.1.4 | Counter | read-only | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| OCT ibmtbsapFiltOut | 1.3.6.1.4.1.2.6.2.15.6.1.1.3 | OCTET STRING | read-only | A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an outgoing frame with that SAP is to be forwarded. |
| CTR ibmtbsapFiltOutNotForwarded | 1.3.6.1.4.1.2.6.2.15.6.1.1.5 | Counter | read-only | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| ibmtbWindowFilters | 1.3.6.1.4.1.2.6.2.15.8 | |||
| INT ibmtbwinFiltIfIndex | 1.3.6.1.4.1.2.6.2.15.8.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmtbwinFiltInContents | 1.3.6.1.4.1.2.6.2.15.8.2.1.2 | OCTET STRING | read-only | String of bytes that will be compared with bytes in the frame. |
| ibmtbwinFiltInEntry | 1.3.6.1.4.1.2.6.2.15.8.2.1 | not-accessible | Filtering information for incoming frames. | |
| INT ibmtbwinFiltInFilterType | 1.3.6.1.4.1.2.6.2.15.8.1.1.2 | INTEGER | read-only | For the incoming filter table, determines whether the entries are permit or deny entries. |
| ibmtbwinFiltInfoEntry | 1.3.6.1.4.1.2.6.2.15.8.1.1 | not-accessible | Window filtering information for a single interface. | |
| ibmtbwinFiltInfoTable | 1.3.6.1.4.1.2.6.2.15.8.1 | not-accessible | Table of Window filtering information. | |
| INT ibmtbwinFiltInId | 1.3.6.1.4.1.2.6.2.15.8.2.1.7 | INTEGER | read-only | A unique identifier associated with this window filter entry. |
| INT ibmtbwinFiltInIfIndex | 1.3.6.1.4.1.2.6.2.15.8.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmtbwinFiltInMaskString | 1.3.6.1.4.1.2.6.2.15.8.2.1.3 | OCTET STRING | read-only | String of bytes that will be masked with bytes in the contents field. |
| CTR ibmtbwinFiltInNotForwarded | 1.3.6.1.4.1.2.6.2.15.8.1.1.4 | Counter | read-only | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| OCT ibmtbwinFiltInNumBytes | 1.3.6.1.4.1.2.6.2.15.8.2.1.5 | OCTET STRING | read-only | Number of bytes in the contents field that are used for filtering |
| OCT ibmtbwinFiltInOffset | 1.3.6.1.4.1.2.6.2.15.8.2.1.6 | OCTET STRING | read-only | Number of bytes offset into the frame from the offset start point to begin the compare. |
| STR ibmtbwinFiltInOffsetStart | 1.3.6.1.4.1.2.6.2.15.8.2.1.4 | DisplayString | read-only | Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address field, whereas, a value of 'DATA' means it is applied at the beginning of the data field. |
| ibmtbwinFiltInTable | 1.3.6.1.4.1.2.6.2.15.8.2 | not-accessible | Table of Window filtering information for incoming frames. | |
| OCT ibmtbwinFiltOutContents | 1.3.6.1.4.1.2.6.2.15.8.3.1.2 | OCTET STRING | read-only | String of bytes that will be compared with bytes in the frame. |
| ibmtbwinFiltOutEntry | 1.3.6.1.4.1.2.6.2.15.8.3.1 | not-accessible | Filtering information for outgoing frames. | |
| INT ibmtbwinFiltOutFilterType | 1.3.6.1.4.1.2.6.2.15.8.1.1.3 | INTEGER | read-only | For the outgoing filter table, determines whether the entries are permit or deny entries. |
| INT ibmtbwinFiltOutId | 1.3.6.1.4.1.2.6.2.15.8.3.1.7 | INTEGER | read-only | A unique identifier associated with this window filter entry. |
| INT ibmtbwinFiltOutIfIndex | 1.3.6.1.4.1.2.6.2.15.8.3.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmtbwinFiltOutMaskString | 1.3.6.1.4.1.2.6.2.15.8.3.1.3 | OCTET STRING | read-only | String of bytes that will be masked with bytes in the contents field. |
| CTR ibmtbwinFiltOutNotForwarded | 1.3.6.1.4.1.2.6.2.15.8.1.1.5 | Counter | read-only | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| OCT ibmtbwinFiltOutNumBytes | 1.3.6.1.4.1.2.6.2.15.8.3.1.5 | OCTET STRING | read-only | Number of bytes in the contents field that are used for filtering |
| OCT ibmtbwinFiltOutOffset | 1.3.6.1.4.1.2.6.2.15.8.3.1.6 | OCTET STRING | read-only | Number of bytes offset into the frame from the offset start point to begin the compare. |
| STR ibmtbwinFiltOutOffsetStart | 1.3.6.1.4.1.2.6.2.15.8.3.1.4 | DisplayString | read-only | Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address field, whereas, a value of 'DATA' means it is applied at the beginning of the data field. |
| ibmtbwinFiltOutTable | 1.3.6.1.4.1.2.6.2.15.8.3 | not-accessible | Table of Window filtering information for outgoing frames. | |
| ibmTG | 1.3.6.1.4.1.2.6.2.19.3 | |||
| INT ibmTGEnable | 1.3.6.1.4.1.2.6.2.19.3.1.1.3 | INTEGER | read-only | Defines whether the 2 T1 in a TG function is enabled on this interface |
| ibmTGEntry | 1.3.6.1.4.1.2.6.2.19.3.1.1 | not-accessible | Each entry identifies an interface participating in the 2 T1 in a TG function, along with its associated TG name and which protocol is using the function. | |
| STR ibmTGGroupName | 1.3.6.1.4.1.2.6.2.19.3.1.1.4 | DisplayString | read-only | Defines the common TG name assigned to all interfaces in this group. All interfaces with the same TG name will belong to the same group. |
| INT ibmTGIfIndex | 1.3.6.1.4.1.2.6.2.19.3.1.1.2 | INTEGER | read-only | Defines the interface associated with this particular TG name and protocol. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group. |
| INT ibmTGProtocol | 1.3.6.1.4.1.2.6.2.19.3.1.1.1 | INTEGER | read-only | Defines the protocol that is supported for this particular interface and TG name. Currently, only the IP protocol is supported |
| CTR ibmTGSwitchOuts | 1.3.6.1.4.1.2.6.2.19.3.1.1.5 | Counter | read-only | Counts the number of times a packet had to be switched to another interface in the transmission group. |
| ibmTGTable | 1.3.6.1.4.1.2.6.2.19.3.1 | not-accessible | This table provides information about serial point-to-point links which are participating in the 2 T1 in a transmission group (TG) function. | |
| CTR ibmTrapNum | 1.3.6.1.4.1.2.6.2.6.1 | Counter | read-only | Number of IBM enterprise specific traps generated by this node. |
| CTR ibmTrapThrottleCount | 1.3.6.1.4.1.2.6.2.6.2 | Counter | read-only | Number of traps throttled since last trap. |
| INT ibmTrapThrottleId | 1.3.6.1.4.1.2.6.2.6.3 | INTEGER | read-only | Trap ID of throttled traps. All throttled traps counted by ibmTrapThrottleCount have the this ID. |
| INT ibmTrapThrottleTime | 1.3.6.1.4.1.2.6.2.6.4 | INTEGER | read-only | Number of seconds which must separate consecutive enterprise-specific traps with identical ID in order to not throttle them. If the value of this object is 0, then trap throttling is inactive. |
| ibmvARP | 1.3.6.1.4.1.2.6.2.18.3.1 | |||
| CTR ibmvarpAssignReqs | 1.3.6.1.4.1.2.6.2.18.3.1.3 | Counter | read-only | The number of ARP assignment request received from clients since the last reboot. The client issues an assignment request packet to the router node that responded first to the query request. |
| CTR ibmvarpAssignResps | 1.3.6.1.4.1.2.6.2.18.3.1.4 | Counter | read-only | The number of ARP assignment responses sent to clients since the last reboot. The router node issues a VINES internet address for the client and sends it back in an assignment response packet. |
| CTR ibmvarpHeaderError | 1.3.6.1.4.1.2.6.2.18.3.1.5 | Counter | read-only | The number of ARP packets received since the last reboot with a header error. |
| CTR ibmvarpQueryReqs | 1.3.6.1.4.1.2.6.2.18.3.1.1 | Counter | read-only | The number of query requests received from clients since the last reboot. When a client is first booted up, it sends out a broadcast query request packet on its LAN segment. |
| CTR ibmvarpServiceResps | 1.3.6.1.4.1.2.6.2.18.3.1.2 | Counter | read-only | The number of ARP query responses sent out from this router node since the last reboot. Each router node on the same LAN segment that is providing address assignments will respond. |
| ibmvFltEntry | 1.3.6.1.4.1.2.6.2.18.7.2.1 | not-accessible | The information for each entry in the port filter configuration table. | |
| INT ibmvFltHCCompare | 1.3.6.1.4.1.2.6.2.18.7.2.1.7 | INTEGER | read-only | Administrator defined value which indicates the relational association desired if filtering is being done based on hop count. If filtering is not being done based on hop count (that is, if the hop count portion of IBM VINES Port Mask is 0) the value of this object will be none(1). |
| INT ibmvFltIfIndex | 1.3.6.1.4.1.2.6.2.18.7.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The IfIndex allows a subset of the filter table to be associated with a particular interface. |
| OCT ibmvFltMask | 1.3.6.1.4.1.2.6.2.18.7.2.1.5 | OCTET STRING | read-only | An octet string indicating the parts of the VIP header and transport header relevant to this filter entry. This mask will be bitwise ANDed with the appropriate header fields; if the result is equal to the value of ibmvnFilterValue, the packet will be filtered according to the value of ibmvnFilterType. |
| INT ibmvFltMode | 1.3.6.1.4.1.2.6.2.18.7.2.1.3 | INTEGER | read-only | Identifies if the port filter is an inbound or outbound filter. |
| INT ibmvFltNo | 1.3.6.1.4.1.2.6.2.18.7.2.1.2 | INTEGER | read-only | A unique integer identifying this filter entry for this interface. |
| ibmvFltTable | 1.3.6.1.4.1.2.6.2.18.7.2 | not-accessible | The list of information about port filter configurations at each interface . | |
| INT ibmvFltType | 1.3.6.1.4.1.2.6.2.18.7.2.1.6 | INTEGER | read-only | Administrator defined value which determines the filtering mode for all filters defined on this port. If the port is using Deny mode, then all packets matching a defined port filter will be discarded. If the port is using Permit mode, then only the packets matching a defined port filter will be forwarded. The default value is Deny. |
| CTR ibmvFltUses | 1.3.6.1.4.1.2.6.2.18.7.2.1.8 | Counter | read-only | This object counts how many times the defined filter was used. |
| OCT ibmvFltValue | 1.3.6.1.4.1.2.6.2.18.7.2.1.4 | OCTET STRING | read-only | An octet string representing the concatenation of VINES IP header fields and VINES transport header fields required by this filter entry. Incoming packets will be bitwise ANDed with the value of ibmvFltMask, and if the result is equal to the value of this object, the packet will be filtered according to the value of ibmvFltValue. Fields from VINES IP and transport headers used for filtering: field length field name ------------ ------------------------------ 8 BITS protocol type 4 BITS hop count 32 BITS destination network number 16 BITS destination subnetwork number 16 BITS destination port number 32 BITS source network number 16 BITS source subnetwork number 16 BITS source port number |
| ibmvFRP | 1.3.6.1.4.1.2.6.2.18.6 | |||
| CTR ibmvFRPfragmented | 1.3.6.1.4.1.2.6.2.18.6.4 | Counter | read-only | The number of packet fragmentations performed since the last reboot. |
| CTR ibmvFRPfragsReassembled | 1.3.6.1.4.1.2.6.2.18.6.2 | Counter | read-only | The number of fragments that were reassembled since the last reboot. If three fragments are to be reassembled into one packet, then this object value will add three to its total. |
| CTR ibmvFRPfrgCreated | 1.3.6.1.4.1.2.6.2.18.6.5 | Counter | read-only | The number of fragments created since the last reboot when fragmenting VINES IP packets. If a VINES IP packet is fragmented into three fragments, then this object value will add three to its total. |
| CTR ibmvFRPfrgFails | 1.3.6.1.4.1.2.6.2.18.6.6 | Counter | read-only | The number of times the fragmentation of a VINES IP packets fails since the last reboot. |
| CTR ibmvFRPreasFails | 1.3.6.1.4.1.2.6.2.18.6.3 | Counter | read-only | The number of times the reassembly of fragments fails since the last reboot. |
| CTR ibmvFRPreassembles | 1.3.6.1.4.1.2.6.2.18.6.1 | Counter | read-only | The number of times packets were reassembled since the last reboot. One VINES IP packet being broken into three message fragments is counted as one fragmentation. The three fragments being reassembled into one VINES IP packet counts as one reassembly. |
| ibmvICP | 1.3.6.1.4.1.2.6.2.18.5 | |||
| CTR ibmvicpExcGens | 1.3.6.1.4.1.2.6.2.18.5.1 | Counter | read-only | Number of exception notifications generated from this router node since the last reboot. |
| CTR ibmvicpHeaderError | 1.3.6.1.4.1.2.6.2.18.5.3 | Counter | read-only | The number of ICP packets received since the last reboot with an ICP header error. |
| CTR ibmvicpMetricGens | 1.3.6.1.4.1.2.6.2.18.5.2 | Counter | read-only | The number of metric notifications generated from this router node since the last reboot. The ICP packet contains metric information about the final transmission medium used to reach a client node. |
| OCT ibmvifAddress | 1.3.6.1.4.1.2.6.2.18.7.4.1.4 | OCTET STRING | read-only | The physical address of the interface, applies to LAN interfaces only. |
| STR ibmvifDescr | 1.3.6.1.4.1.2.6.2.18.7.4.1.3 | DisplayString | read-only | A textual description of the interface. |
| ibmvifEntry | 1.3.6.1.4.1.2.6.2.18.7.4.1 | not-accessible | Information about one interface. | |
| CTR ibmvifInErrs | 1.3.6.1.4.1.2.6.2.18.7.4.1.6 | Counter | read-only | The total number of received VINES IP packets that contained errors since the last reboot. |
| CTR ibmvifInPkts | 1.3.6.1.4.1.2.6.2.18.7.4.1.5 | Counter | read-only | The total number of VINES IP packets that the router node received since the last reboot. |
| INT ibmvifNumber | 1.3.6.1.4.1.2.6.2.18.7.3 | INTEGER | read-only | The number of VINES interfaces configured on the router node. |
| CTR ibmvifOutErrs | 1.3.6.1.4.1.2.6.2.18.7.4.1.8 | Counter | read-only | The total number of transmitted VINES IP packets that contained errors since the last reboot. |
| CTR ibmvifOutPkts | 1.3.6.1.4.1.2.6.2.18.7.4.1.7 | Counter | read-only | The total number of VINES IP packets that the router node sent since the last reboot. |
| INT ibmvifPort | 1.3.6.1.4.1.2.6.2.18.7.4.1.2 | INTEGER | read-only | The port number of the interface. |
| INT ibmvifSlot | 1.3.6.1.4.1.2.6.2.18.7.4.1.1 | INTEGER | read-only | The slot number of the interface's communications card. |
| ibmvifTable | 1.3.6.1.4.1.2.6.2.18.7.4 | not-accessible | List of interfaces with some statistics about each interface. | |
| ibmvines | 1.3.6.1.4.1.2.6.2.18 | |||
| ibmvInterface | 1.3.6.1.4.1.2.6.2.18.7 | |||
| ibmvIP | 1.3.6.1.4.1.2.6.2.18.2 | |||
| CTR ibmvipBad | 1.3.6.1.4.1.2.6.2.18.2.7 | Counter | read-only | The total number of badly formed packets that the router node has received since the last booted. |
| CTR ibmvipBadHeaders | 1.3.6.1.4.1.2.6.2.18.2.8 | Counter | read-only | The number of incoming VINES IP packets received since the last reboot which contained a header error; excluding the following errors: length, checksum and time to live. |
| CTR ibmvipBadLens | 1.3.6.1.4.1.2.6.2.18.2.10 | Counter | read-only | The number of VINES IP packets received since the last reboot whose packet size is not equal to the number of bytes specified in the VINES IP header field. |
| CTR ibmvipBadSums | 1.3.6.1.4.1.2.6.2.18.2.11 | Counter | read-only | The number of VINES IP packets received since the last reboot with a bad checksum. |
| CTR ibmvipBcast | 1.3.6.1.4.1.2.6.2.18.2.4 | Counter | read-only | The number of VINES IP broadcast packets sent, both generated from the router node and routed from other nodes, since the last reboot. |
| CTR ibmvipBcastInReceives | 1.3.6.1.4.1.2.6.2.18.2.6 | Counter | read-only | The number of VINES IP broadcast packets received since the last reboot. |
| CTR ibmvipInDiscards | 1.3.6.1.4.1.2.6.2.18.2.12 | Counter | read-only | The number of incoming VINES IP packets discarded since the last reboot due to lack of resources. |
| CTR ibmvipInReceives | 1.3.6.1.4.1.2.6.2.18.2.5 | Counter | read-only | The number of unicast VINES IP packets received since the last reboot. A unicast packet is destined for this particular router node. It is not being forwarded, multicasted or broadcasted. |
| CTR ibmvipOutNoRoutes | 1.3.6.1.4.1.2.6.2.18.2.14 | Counter | read-only | The number of outgoing VINES IP packets discarded since the last reboot because no route is available. |
| CTR ibmvipRouted | 1.3.6.1.4.1.2.6.2.18.2.3 | Counter | read-only | The total number of packets that were routed to another node since the last reboot. |
| CTR ibmvipTooSmalls | 1.3.6.1.4.1.2.6.2.18.2.9 | Counter | read-only | The number of VINES IP packets received since the last reboot with len < the size of a VINES IP header. |
| CTR ibmvipTotalIn | 1.3.6.1.4.1.2.6.2.18.2.1 | Counter | read-only | The total number of VINES IP packets that the router node has received since the last reboot. |
| CTR ibmvipTotalOut | 1.3.6.1.4.1.2.6.2.18.2.2 | Counter | read-only | The total number of VINES IP packets that the router node has sent since the last reboot. |
| CTR ibmvipZeroHops | 1.3.6.1.4.1.2.6.2.18.2.13 | Counter | read-only | The number of VINES IP packets discarded since the last reboot because the hop count equals zero and the current node is not the destination. |
| INT ibmvNbrAging | 1.3.6.1.4.1.2.6.2.18.3.3.1.9 | INTEGER | read-only | The amount of time left before a neighbor entry will be removed because of aging. For a WAN link, which is defined to be permanent, this object is not applicable. |
| ibmvNbrEntry | 1.3.6.1.4.1.2.6.2.18.3.3.1 | not-accessible | The information for each entry in the neighbor table. | |
| INT ibmvNbrFlags | 1.3.6.1.4.1.2.6.2.18.3.3.1.10 | INTEGER | read-only | Only applicable to a WAN link; states if the link is permanent or non-permanent. |
| INT ibmvNbrIfIndex | 1.3.6.1.4.1.2.6.2.18.3.3.1.12 | INTEGER | read-only | The interface (using the MIB II standard) used to reach the neighbor. This number corresponds to the IfIndex object found in MIB II. |
| INT ibmvNbrIfType | 1.3.6.1.4.1.2.6.2.18.3.3.1.4 | INTEGER | read-only | The type of interface that the server uses to reach the neighbor. |
| OCT ibmvNbrLocAddress | 1.3.6.1.4.1.2.6.2.18.3.3.1.6 | OCTET STRING | read-only | The address of the router node's physical interface, such as a LAN address. |
| INT ibmvNbrLocPort | 1.3.6.1.4.1.2.6.2.18.3.3.1.8 | INTEGER | read-only | The port number on the interface card that the router node used to reach the neighbor. |
| INT ibmvNbrLocSlot | 1.3.6.1.4.1.2.6.2.18.3.3.1.7 | INTEGER | read-only | The slot number of the interface card that the router node uses to reach the neighbor. |
| INT ibmvNbrMetric | 1.3.6.1.4.1.2.6.2.18.3.3.1.13 | INTEGER | read-only | The cost to reach the neighbor. |
| OCT ibmvNbrNetid | 1.3.6.1.4.1.2.6.2.18.3.3.1.1 | OCTET STRING | read-only | The network ID of the neighbor. The VINES internet address has the following form: 'nnnnnnnn.ssss'hex, where n = network ID and s = subnetwork ID. If the neighbor is a router, then network ID is the router node's (the neighbor's) serial number. |
| INT ibmvNbrNumber | 1.3.6.1.4.1.2.6.2.18.3.2 | INTEGER | read-only | The number of entries in the neighbor table. |
| OCT ibmvNbrRemAddress | 1.3.6.1.4.1.2.6.2.18.3.3.1.5 | OCTET STRING | read-only | The address of the neighbor's physical interface. For LAN's, it is the hardware address of the neighbor. |
| OCT ibmvNbrRIF | 1.3.6.1.4.1.2.6.2.18.3.3.1.11 | OCTET STRING | read-only | LAN - MAC address and if applicable, source routing information. Frame Relay - n/a PPP - n/a |
| OCT ibmvNbrSubNetid | 1.3.6.1.4.1.2.6.2.18.3.3.1.2 | OCTET STRING | read-only | The subnetwork ID of the neighbor. The VINES internet address has the following form: 'nnnnnnnn.ssss'hex, where n = network ID and s = subnetwork ID. If the neighbor is a router node, then the subnetwork ID for the router node (the neighbor) is 1. |
| ibmvNbrTable | 1.3.6.1.4.1.2.6.2.18.3.3 | not-accessible | A list of information about IBM's VINES router neighbor table. | |
| INT ibmvNbrType | 1.3.6.1.4.1.2.6.2.18.3.3.1.3 | INTEGER | read-only | The type of the neighbor (workstation = pc). |
| ibmvNeighbor | 1.3.6.1.4.1.2.6.2.18.3 | |||
| INT ibmvPortCfgARP | 1.3.6.1.4.1.2.6.2.18.7.1.1.2 | INTEGER | read-only | Administrator defined value which specifies whether the router node will assign VINES addresses to clients that reside on the LAN attached to this port. The default value for this object is 'disable'. |
| INT ibmvPortCfgEN | 1.3.6.1.4.1.2.6.2.18.7.1.1.8 | INTEGER | read-only | Administrator defined value which determines the encapsulation method used for receiving and transmitting VINES packets on this port. Ethernet II uses DIX encapsulation with a packet type 0x0BAD for VINES IP and 0x0BAF for VINES Link Level Echo. IEEE 802.3 SNAP uses 802.2 encapsulation followed by a SNAP header using the organizationally unique ID 0x08 00 4A, the protocol id 0x80C4 for VINES IP and the protocol id 0x80C5 for VINES Link Level Echo. |
| ibmvPortCfgEntry | 1.3.6.1.4.1.2.6.2.18.7.1.1 | not-accessible | The information for each entry in the port configuration table. | |
| INT ibmvPortCfgHCtoServ | 1.3.6.1.4.1.2.6.2.18.7.1.1.4 | INTEGER | read-only | Administrator defined value which specifies the number of hops from the client to the router node. |
| INT ibmvPortCfgIfIndex | 1.3.6.1.4.1.2.6.2.18.7.1.1.1 | INTEGER | read-only | The interface (using the MIB II standard) which uniquely identifies each interface and allows multiple tables to be associated with a given interface. This number corresponds to the IfIndex object found in MIB II. |
| INT ibmvPortCfgInFlt | 1.3.6.1.4.1.2.6.2.18.7.1.1.9 | INTEGER | read-only | Administrator defined value which allows inbound port filters to be defined. The default value is 'disabled'. |
| INT ibmvPortCfgInFltNum | 1.3.6.1.4.1.2.6.2.18.7.1.1.10 | INTEGER | read-only | The number of inbound port filters defined for this port. |
| INT ibmvPortCfgMetric | 1.3.6.1.4.1.2.6.2.18.7.1.1.6 | INTEGER | read-only | Administrator defined value for port metric. This value overrides the metric which is used by the IBM 6611 to make routing decisions. If no response is provided to this parameter, the IBM 6611 will use defaults contained within the MPNP program. These defaults are based on values assigned by Banyan Systems for its VINES servers. The port metric is a rough estimate of the round trip delay for a maximum sized VINES IP packet to travel to any neighbor on this port. The unit for the metric value is 200 milliseconds. The default metric for an Ethernet port is 2. The default metric for a Token-Ring is determined by the response to the Token-Ring Data Rate parameter. The default metric for a serial port is determined by the response to the Serial-Line Speed parameter. |
| INT ibmvPortCfgOutFlt | 1.3.6.1.4.1.2.6.2.18.7.1.1.11 | INTEGER | read-only | Administrator defined value which allows outbound port filters to be defined. The default value is 'disabled'. |
| INT ibmvPortCfgOutFltNum | 1.3.6.1.4.1.2.6.2.18.7.1.1.12 | INTEGER | read-only | The number of outbound port filters defined for this port. |
| INT ibmvPortCfgPerUpdate | 1.3.6.1.4.1.2.6.2.18.7.1.1.5 | INTEGER | read-only | Administrator defined value which specifies whether periodic updates will be sent over a WAN link. |
| INT ibmvPortCfgServ | 1.3.6.1.4.1.2.6.2.18.7.1.1.3 | INTEGER | read-only | Administrator defined value specifying whether the serverless option is enables or disabled. When the serverless option is enabled; the router looks for particular broadcasts that clients use in finding the services on the VINES server. This allows client nodes on a serverless LAN to communicate with a VINES server more than one hop away. The default value for this object is 'disable'. |
| ibmvPortCfgTable | 1.3.6.1.4.1.2.6.2.18.7.1 | not-accessible | The list of information about port configuration at each interface. | |
| INT ibmvPortCfgTR | 1.3.6.1.4.1.2.6.2.18.7.1.1.7 | INTEGER | read-only | Administrator defined value which determines the encapsulation method used for receiving and transmitting VINES packets on this port. IEEE 802.5 LLC uses 802.2 encapsulation followed by an LLC field using SAP value 0xBC You cannot use IEEE 802.5 LLC encapsulation on the same port that performs data link switching, if the 0xBC SAP has been configured for frame forwarding by the data link switching function. IEEE 802.5 SNAP uses 802.2 encapsulation followed by a SNAP header using the organizationally unique ID 0x08 00 4A, the protocol id 0x80C4 for VINES IP and the protocol id 0x80C5 for VINES Link Level Echo. |
| STR ibmvRouterName | 1.3.6.1.4.1.2.6.2.18.1.2 | DisplayString | read-only | The name of the router node, up to 15 characters long. |
| INT ibmvRouterNetid | 1.3.6.1.4.1.2.6.2.18.1.3 | INTEGER | read-only | The VINES network ID of the router node equal to the router node's serial number. This id may be up to 4 bytes in length. |
| ibmvRouting | 1.3.6.1.4.1.2.6.2.18.4 | |||
| INT ibmvRtCfgFlt | 1.3.6.1.4.1.2.6.2.18.4.1.8 | INTEGER | read-only | Enables or disables all RTP router filters defined. If no RTP router filters are defined, then this object has no effect. If a filter is defined, then the default value is 'enabled'. |
| ibmvRtCfgFltEntry | 1.3.6.1.4.1.2.6.2.18.4.1.10.1 | not-accessible | The information for each entry in the RTP router filter table. | |
| INT ibmvRtCfgFltMode | 1.3.6.1.4.1.2.6.2.18.4.1.10.1.2 | INTEGER | read-only | The filtering action for the RTP router filter. The RTP router filters operate on the network number contained in the source network number field in the IP header of any RTP packet (update, request, response, and redirect). (The subnetwork ID is assumed to be 0x0001.) In deny mode, the IBM 6611 ignores route information from a service node if the sending router's network number matches any RTP router filter. In permit mode, the IBM 6611 processes route information from a router only if the sending router's network number matches any RTP router filter. The default for this object is 'deny'. |
| OCT ibmvRtCfgFltNetID | 1.3.6.1.4.1.2.6.2.18.4.1.10.1.1 | OCTET STRING | read-only | Administrator defined object which specifies the VINES network number to be filtered on the port. The range of the network number is 00000000 - FFFFFFFE. If the network number, 0xFFFFFFFF, is defined, then all network numbers will be filtered. |
| INT ibmvRtCfgFltNum | 1.3.6.1.4.1.2.6.2.18.4.1.9 | INTEGER | read-only | The number of RTP router filters currently defined. |
| ibmvRtCfgFltTable | 1.3.6.1.4.1.2.6.2.18.4.1.10 | not-accessible | A list of information about the RTP router filters which are specified for this router node. | |
| CTR ibmvRtCfgFltUses | 1.3.6.1.4.1.2.6.2.18.4.1.10.1.3 | Counter | read-only | The number of times the defined filter was used. |
| INT ibmvRtCfgInFlt | 1.3.6.1.4.1.2.6.2.18.4.1.2 | INTEGER | read-only | Enables or disables all inbound RTP filters defined. If no inbound RTP filters are defined, then this object has no effect. If a filter is defined, then the default value is 'enabled'. |
| ibmvRtCfgInFltEntry | 1.3.6.1.4.1.2.6.2.18.4.1.4.1 | not-accessible | The information for each entry in the inbound RTP filter table. | |
| INT ibmvRtCfgInFltIfIndex | 1.3.6.1.4.1.2.6.2.18.4.1.4.1.2 | INTEGER | read-only | The interface (using the MIB II standard) for which the inbound RTP filters were defined. This number corresponds to the IfIndex object found in MIB II. |
| INT ibmvRtCfgInFltMode | 1.3.6.1.4.1.2.6.2.18.4.1.4.1.3 | INTEGER | read-only | The filtering action for the inbound RTP filter. The inbound RTP filters operate on network numbers contained in the topological entries in the RTP update, response, and redirect packets received over a specified interface. In deny mode, the 6611 ignores route information for a network if the network number and the port on which the route information was received matches any inbound RTP filter. In permit mode, the IBM 6611 processes route information for a network only if the network number and the port on which the route information was received matches any inbound RTP filter. The default for this object is 'deny'. |
| OCT ibmvRtCfgInFltNetID | 1.3.6.1.4.1.2.6.2.18.4.1.4.1.1 | OCTET STRING | read-only | Administrator defined object which specifies the VINES network number to be filtered on the port. The range of the network number is 00000000 - FFFFFFFE. If the network number, 0xFFFFFFFF, is defined, then all network numbers will be filtered. |
| INT ibmvRtCfgInFltNum | 1.3.6.1.4.1.2.6.2.18.4.1.3 | INTEGER | read-only | The number of inbound RTP filters currently defined. |
| ibmvRtCfgInFltTable | 1.3.6.1.4.1.2.6.2.18.4.1.4 | not-accessible | A list of information about the inbound RTP filters which are specified for this router node. | |
| CTR ibmvRtCfgInFltUses | 1.3.6.1.4.1.2.6.2.18.4.1.4.1.4 | Counter | read-only | The number of times the defined filter was used. |
| INT ibmvRtCfgMax | 1.3.6.1.4.1.2.6.2.18.4.1.1 | INTEGER | read-only | The maximum number of entries allowed in the routing table. This value is not defined by administrator. |
| INT ibmvRtCfgOutFlt | 1.3.6.1.4.1.2.6.2.18.4.1.5 | INTEGER | read-only | Enables or disables all outbound RTP filters defined. If no outbound RTP filters are defined, then this object has no effect. If a filter is defined, then the default value is 'enabled'. |
| ibmvRtCfgOutFltEntry | 1.3.6.1.4.1.2.6.2.18.4.1.7.1 | not-accessible | The information for each entry in the outbound RTP filter table. | |
| INT ibmvRtCfgOutFltIfIndex | 1.3.6.1.4.1.2.6.2.18.4.1.7.1.2 | INTEGER | read-only | The interface (using the MIB II standard) for which the outbound RTP filters were defined. This number corresponds to the IfIndex object found in MIB II. |
| INT ibmvRtCfgOutFltMode | 1.3.6.1.4.1.2.6.2.18.4.1.7.1.3 | INTEGER | read-only | The filtering action for the outbound RTP filter. The outbound RTP filters operate on the network numbers contained in the topological entries in RTP update and response packets transmitted over a specified interface. In deny mode, filters operate on interface names and network numbers (that is, the network numbers contained in the topological entries in the RTP packets). In deny mode, the IBM 6611 does not advertise route information for a network if the network number and the interface on which the route information is to be transmitted matches any outbound RTP filter. In permit mode, the 6611 advertises route information for a network only if the network number and the interface on which the route information is to be transmitted matches any outbound RTP filter. The default for this object is 'Deny'. |
| OCT ibmvRtCfgOutFltNetID | 1.3.6.1.4.1.2.6.2.18.4.1.7.1.1 | OCTET STRING | read-only | Administrator defined object which specifies the VINES network number to be filtered on the port. The range of the network number is 00000000 - FFFFFFFE. If the network number, 0xFFFFFFFF, is defined, then all network numbers will be filtered. |
| INT ibmvRtCfgOutFltNum | 1.3.6.1.4.1.2.6.2.18.4.1.6 | INTEGER | read-only | The number of outbound RTP filters currently defined. |
| ibmvRtCfgOutFltTable | 1.3.6.1.4.1.2.6.2.18.4.1.7 | not-accessible | A list of information about the outbound RTP filters which are specified for this router node. | |
| CTR ibmvRtCfgOutFltUses | 1.3.6.1.4.1.2.6.2.18.4.1.7.1.4 | Counter | read-only | The number of times the defined filter was used. |
| ibmvRtConfig | 1.3.6.1.4.1.2.6.2.18.4.1 | |||
| ibmvRtEntry | 1.3.6.1.4.1.2.6.2.18.4.4.1 | not-accessible | The information for each entry in the router table. | |
| OCT ibmvRtGateNetid | 1.3.6.1.4.1.2.6.2.18.4.4.1.4 | OCTET STRING | read-only | The network ID of the router node that acts as the router for reaching the destination router node. |
| INT ibmvRtIdle | 1.3.6.1.4.1.2.6.2.18.4.4.1.3 | INTEGER | read-only | The time to live timer for this router node's entry. This value indicates the amount of time before the entry is removed from the called router node's routing table. The value is returned in 90 second units. |
| INT ibmvRtIfIndex | 1.3.6.1.4.1.2.6.2.18.4.4.1.5 | INTEGER | read-only | The interface (using the MIB II standard) which identifies the local interface through which the next hop of this route should be reached. This number corresponds to the IfIndex object found in MIB II. |
| INT ibmvRtMetric | 1.3.6.1.4.1.2.6.2.18.4.4.1.2 | INTEGER | read-only | The routing metric used by the called router node to reach the destination. A routing metric is an estimated round-trip delay time associated with the router that maximum sized VINES IP packets will take to reach the destination. The metric reflects the cost of the path to the destination, it is in 200-millisecond units. |
| OCT ibmvRtNetid | 1.3.6.1.4.1.2.6.2.18.4.4.1.1 | OCTET STRING | read-only | The network ID of the router node's destination router node. |
| INT ibmvRtNumber | 1.3.6.1.4.1.2.6.2.18.4.3 | INTEGER | read-only | The number of entires in the route table. |
| ibmvRTP | 1.3.6.1.4.1.2.6.2.18.4.2 | |||
| CTR ibmvrtpHeaderError | 1.3.6.1.4.1.2.6.2.18.4.2.9 | Counter | read-only | The number of RTP packets received since the last reboot with a RTP header error. |
| CTR ibmvrtpRedRecs | 1.3.6.1.4.1.2.6.2.18.4.2.8 | Counter | read-only | The number of routing redirect packets received since the last reboot. A 6611 receives a routing redirect packet when another node knows a more direct path to the destination node. |
| CTR ibmvrtpRedSents | 1.3.6.1.4.1.2.6.2.18.4.2.7 | Counter | read-only | The number of routing redirect packets sent since the last reboot. The routing redirect packets are sent by a node to notify another node of a more direct path to a destination node. |
| CTR ibmvrtpReqRecs | 1.3.6.1.4.1.2.6.2.18.4.2.4 | Counter | read-only | The number of routing request packets received since the last reboot. The 6611 receives routing request packets when another node requires an immediate update. The 6611 will send the update in a routing response packet. |
| CTR ibmvrtpReqSents | 1.3.6.1.4.1.2.6.2.18.4.2.3 | Counter | read-only | The number of routing request packets sent since the last reboot. Routing request packets are sent by a node when it requires an immediate update. |
| CTR ibmvrtpResRecs | 1.3.6.1.4.1.2.6.2.18.4.2.6 | Counter | read-only | The number of routing response packets received since the last reboot. When a node sends out a routing request packet, it receives a routing response packet which contains all the routing information requested. |
| CTR ibmvrtpResSents | 1.3.6.1.4.1.2.6.2.18.4.2.5 | Counter | read-only | The number of routing response packets sent since the last reboot. Routing response packets are sent in response to a routing request packet. |
| CTR ibmvrtpUpdRecs | 1.3.6.1.4.1.2.6.2.18.4.2.2 | Counter | read-only | The number of routing update packets received since the last reboot. The routing update packets are sent from neighboring node making known their existence. Packets received from router nodes include network topology information. |
| CTR ibmvrtpUpdSents | 1.3.6.1.4.1.2.6.2.18.4.2.1 | Counter | read-only | The number of routing update packets sent since the last reboot. The routing update packets are periodically broadcast by nodes to notify neighboring nodes of their existence. Router nodes include network topology information in these updates. |
| INT ibmvRtState | 1.3.6.1.4.1.2.6.2.18.4.4.1.6 | INTEGER | read-only | The state the routing entry; permanent or not permanent. |
| ibmvRtTable | 1.3.6.1.4.1.2.6.2.18.4.4 | not-accessible | A list of information about IBM's VINES router table. | |
| ibmvSysConfig | 1.3.6.1.4.1.2.6.2.18.1 | |||
| INT ibmvSysRtr | 1.3.6.1.4.1.2.6.2.18.1.1 | INTEGER | read-only | Indicates whether this node is acting as a VINES router. |
| INT ibmwindowFilterIfIndex | 1.3.6.1.4.1.2.6.2.7.6.1.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmwindowFilterInBcastType | 1.3.6.1.4.1.2.6.2.7.6.1.1.2 | INTEGER | read-only | For the incoming Window filter table, determines what type of frames will be filtered. |
| OCT ibmwindowFilterInContents | 1.3.6.1.4.1.2.6.2.7.6.2.1.2 | OCTET STRING | read-only | String of bytes that will be compared with bytes in the frame. |
| ibmwindowFilterInEntry | 1.3.6.1.4.1.2.6.2.7.6.2.1 | not-accessible | Filtering information for incoming frames. | |
| INT ibmwindowFilterInFilterType | 1.3.6.1.4.1.2.6.2.7.6.1.1.4 | INTEGER | read-only | For the incoming filter table, determines whether the entries are permit or deny entries. |
| ibmwindowFilterInfoEntry | 1.3.6.1.4.1.2.6.2.7.6.1.1 | not-accessible | Window filtering information for a single interface. | |
| ibmwindowFilterInfoTable | 1.3.6.1.4.1.2.6.2.7.6.1 | not-accessible | Table of Window filtering information. | |
| INT ibmwindowFilterInId | 1.3.6.1.4.1.2.6.2.7.6.2.1.7 | INTEGER | read-only | A unique identifier associated with this window filter entry. |
| INT ibmwindowFilterInIfIndex | 1.3.6.1.4.1.2.6.2.7.6.2.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmwindowFilterInMaskString | 1.3.6.1.4.1.2.6.2.7.6.2.1.3 | OCTET STRING | read-only | String of bytes that will be masked with bytes in the contents field. |
| CTR ibmwindowFilterInNotForwarded | 1.3.6.1.4.1.2.6.2.7.6.1.1.6 | Counter | read-only | Number of packets not forwarded, in the incoming direction, because they were filtered out. |
| OCT ibmwindowFilterInNumBytes | 1.3.6.1.4.1.2.6.2.7.6.2.1.5 | OCTET STRING | read-only | Number of bytes in the contents field that are used for filtering. |
| OCT ibmwindowFilterInOffset | 1.3.6.1.4.1.2.6.2.7.6.2.1.6 | OCTET STRING | read-only | Number of bytes offset into the frame from the offset start point to begin the compare. |
| STR ibmwindowFilterInOffsetStart | 1.3.6.1.4.1.2.6.2.7.6.2.1.4 | DisplayString | read-only | Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address field, whereas, a value of 'SAP' means it is applied at the beginning of the destination SAP field. |
| ibmwindowFilterInTable | 1.3.6.1.4.1.2.6.2.7.6.2 | not-accessible | Table of Window filtering information for incoming frames. | |
| INT ibmwindowFilterInType | 1.3.6.1.4.1.2.6.2.7.6.2.1.8 | INTEGER | read-only | The type of entry, either sr or tb. |
| INT ibmwindowFilterOutBcastType | 1.3.6.1.4.1.2.6.2.7.6.1.1.3 | INTEGER | read-only | For the outgoing Window filter table, determines what type of frames will be filtered. |
| OCT ibmwindowFilterOutContents | 1.3.6.1.4.1.2.6.2.7.6.3.1.2 | OCTET STRING | read-only | String of bytes that will be compared with bytes in the frame. |
| ibmwindowFilterOutEntry | 1.3.6.1.4.1.2.6.2.7.6.3.1 | not-accessible | Filtering information for outgoing frames. | |
| INT ibmwindowFilterOutFilterType | 1.3.6.1.4.1.2.6.2.7.6.1.1.5 | INTEGER | read-only | For the outgoing filter table, determines whether the entries are permit or deny entries. |
| INT ibmwindowFilterOutId | 1.3.6.1.4.1.2.6.2.7.6.3.1.7 | INTEGER | read-only | A unique identifier associated with this window filter entry. |
| INT ibmwindowFilterOutIfIndex | 1.3.6.1.4.1.2.6.2.7.6.3.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmwindowFilterOutMaskString | 1.3.6.1.4.1.2.6.2.7.6.3.1.3 | OCTET STRING | read-only | String of bytes that will be masked with bytes in the contents field. |
| CTR ibmwindowFilterOutNotForwarded | 1.3.6.1.4.1.2.6.2.7.6.1.1.7 | Counter | read-only | Number of packets not forwarded, in the outgoing direction, because they were filtered out. |
| OCT ibmwindowFilterOutNumBytes | 1.3.6.1.4.1.2.6.2.7.6.3.1.5 | OCTET STRING | read-only | Number of bytes in the contents field that are used for filtering. |
| OCT ibmwindowFilterOutOffset | 1.3.6.1.4.1.2.6.2.7.6.3.1.6 | OCTET STRING | read-only | Number of bytes offset into the frame from the offset start point to begin the compare. |
| STR ibmwindowFilterOutOffsetStart | 1.3.6.1.4.1.2.6.2.7.6.3.1.4 | DisplayString | read-only | Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address field, whereas, a value of 'SAP' means it is applied at the beginning of the destination SAP field. |
| ibmwindowFilterOutTable | 1.3.6.1.4.1.2.6.2.7.6.3 | not-accessible | Table of Window filtering information for outgoing frames. | |
| INT ibmwindowFilterOutType | 1.3.6.1.4.1.2.6.2.7.6.3.1.8 | INTEGER | read-only | The type of entry, either sr or tb. |
| INT ibmwindowFilterType | 1.3.6.1.4.1.2.6.2.7.6.1.1.8 | INTEGER | read-only | The type of entry, either sr or tb. |
| ibmxns | 1.3.6.1.4.1.2.6.2.11 | |||
| OCT ibmxnsAddrAddress | 1.3.6.1.4.1.2.6.2.11.34.1.1 | OCTET STRING | read-only | The XNS address to which this entry's addressing information pertains. |
| ibmxnsAddrEntry | 1.3.6.1.4.1.2.6.2.11.34.1 | not-accessible | An entry in the XNS address table. | |
| INT ibmxnsAddrIfIndex | 1.3.6.1.4.1.2.6.2.11.34.1.2 | INTEGER | read-only | The interface index which identifies the interface to which this entry is applicable. |
| ibmxnsAddrTable | 1.3.6.1.4.1.2.6.2.11.34 | not-accessible | The XNS Address Table. | |
| ibmxnsConfigEntry | 1.3.6.1.4.1.2.6.2.11.4.1 | not-accessible | XNS configuration information for a single interface. | |
| ibmxnsConfigTable | 1.3.6.1.4.1.2.6.2.11.4 | not-accessible | The table of XNS configuration information gathered on a per-interface basis. | |
| CTR ibmxnsErrChecksum | 1.3.6.1.4.1.2.6.2.11.25 | Counter | read-only | Number of Error packets generated because an IDP datagram was dropped due a bad checksum. |
| CTR ibmxnsErrCongDiscard | 1.3.6.1.4.1.2.6.2.11.31 | Counter | read-only | Number of Error packets generated for congestion discards. |
| CTR ibmxnsErrCongWarn | 1.3.6.1.4.1.2.6.2.11.30 | Counter | read-only | Number of Error packets generated for congestion warnings. |
| CTR ibmxnsErrOutMsgs | 1.3.6.1.4.1.2.6.2.11.33 | Counter | read-only | Total number of error packets generated. |
| INT ibmxnsErrpActive | 1.3.6.1.4.1.2.6.2.11.4.1.4 | INTEGER | read-only | Indicates if this port is originating error protocol packets. |
| CTR ibmxnsErrResources | 1.3.6.1.4.1.2.6.2.11.29 | Counter | read-only | Number of Error packets generated because an IDP datagram was dropped due to lack of resources. |
| CTR ibmxnsErrSquelched | 1.3.6.1.4.1.2.6.2.11.32 | Counter | read-only | Number of error packets that would have been generated, except that the faulted datagram had one of the following conditions: - was sent as link layer broadcast - NS destination was broadcast - NS source was 0, loopback, or broadcast |
| CTR ibmxnsErrTooBig | 1.3.6.1.4.1.2.6.2.11.28 | Counter | read-only | Number of Error packets generated because an IDP datagram was dropped because it was too large to be forwarded through this node. |
| CTR ibmxnsErrTTLExpired | 1.3.6.1.4.1.2.6.2.11.27 | Counter | read-only | Number of Error packets generated because an IDP datagram was dropped because its time-to-live counter had expired. |
| CTR ibmxnsErrUnreach | 1.3.6.1.4.1.2.6.2.11.26 | Counter | read-only | Number of Error packets generated because an IDP datagram was dropped due to an unreachable host. |
| CTR ibmxnsErrUnspec | 1.3.6.1.4.1.2.6.2.11.24 | Counter | read-only | Number of Error packets generated because an IDP datagram was dropped for unspecified reasons. |
| ibmxnsFilterEntry | 1.3.6.1.4.1.2.6.2.11.36.1 | not-accessible | An entry in the XNS filter table. | |
| INT ibmxnsFilterHCCompare | 1.3.6.1.4.1.2.6.2.11.36.1.6 | INTEGER | read-only | Indicates the relational association desired if filtering is being done based on hop count. If filtering is not being done based on hop count (that is, if the hop count portion of ibmxnsFilterMask is 0) the value of this object will be none(1). |
| INT ibmxnsFilterIfIndex | 1.3.6.1.4.1.2.6.2.11.36.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| OCT ibmxnsFilterMask | 1.3.6.1.4.1.2.6.2.11.36.1.4 | OCTET STRING | read-only | An octet string indicating the parts of the IDP header relevant to this filter entry. This mask will be bitwise ANDed with the IDP packet; if the result is equal to the value of ibmxnsFilterValue, the packet will be filtered according to the value of ibmxnsFilterType. |
| INT ibmxnsFilterNumber | 1.3.6.1.4.1.2.6.2.11.36.1.2 | INTEGER | read-only | A unique integer identifying this filter entry for this interface. |
| ibmxnsFilterTable | 1.3.6.1.4.1.2.6.2.11.36 | not-accessible | The XNS Filter Table. | |
| INT ibmxnsFilterType | 1.3.6.1.4.1.2.6.2.11.36.1.5 | INTEGER | read-only | Determines whether this filter is a deny entry or a permit entry. |
| CTR ibmxnsFilterUse | 1.3.6.1.4.1.2.6.2.11.36.1.7 | Counter | read-only | Usage count for this filter entry. |
| OCT ibmxnsFilterValue | 1.3.6.1.4.1.2.6.2.11.36.1.3 | OCTET STRING | read-only | An octet string representing the IDP header information required by this filter entry. Incoming IDP packets will be bitwise ANDed with the value of ibmxnsFilterMask, and if the result is equal to the value of this object, the packet will be filtered according to the value of ibmxnsFilterType. The structure of an IDP header is as follows: BIT16 checksum BIT16 length BIT8 transport control (ie. hop count) BIT8 packet type BIT32 destination network address BIT48 destination host address BIT16 destination socket BIT32 source network address BIT48 source host address BIT16 source socket |
| CTR ibmxnsidpBadLen | 1.3.6.1.4.1.2.6.2.11.21 | Counter | read-only | Number of IDP datagrams with number of bytes in the packet less than the number of bytes specified in the IDP header field. |
| CTR ibmxnsidpBadSum | 1.3.6.1.4.1.2.6.2.11.22 | Counter | read-only | Number of IDP datagrams with a bad checksum |
| CTR ibmxnsidpBadTTL | 1.3.6.1.4.1.2.6.2.11.23 | Counter | read-only | Number of IDP datagrams with TTL value > IDP maximum hopcount of 16. |
| CTR ibmxnsidpBcastInReceives | 1.3.6.1.4.1.2.6.2.11.6 | Counter | read-only | Number of IDP broadcast datagrams received. |
| CTR ibmxnsidpBcastOutRequests | 1.3.6.1.4.1.2.6.2.11.12 | Counter | read-only | Number of IDP broadcast datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmxnsidpForwDatagrams. |
| INT ibmxnsidpChecksum | 1.3.6.1.4.1.2.6.2.11.4.1.3 | INTEGER | read-only | Indicates the type of checksumming being done by IDP. |
| INT ibmxnsidpForwarding | 1.3.6.1.4.1.2.6.2.11.1 | INTEGER | read-only | Indicates if this node is acting as an XNS router. |
| CTR ibmxnsidpForwDatagrams | 1.3.6.1.4.1.2.6.2.11.14 | Counter | read-only | Number of IDP datagrams for which an attempt was made to forward. |
| CTR ibmxnsidpInDiscards | 1.3.6.1.4.1.2.6.2.11.8 | Counter | read-only | Number of incoming IDP datagrams discarded due to lack of resources. |
| CTR ibmxnsidpInReceives | 1.3.6.1.4.1.2.6.2.11.5 | Counter | read-only | Total number of IDP datagrams received. |
| CTR ibmxnsidpMcastInReceives | 1.3.6.1.4.1.2.6.2.11.7 | Counter | read-only | Number of IDP multicast datagrams received. |
| CTR ibmxnsidpMcastOutRequests | 1.3.6.1.4.1.2.6.2.11.13 | Counter | read-only | Number of IDP multicast datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmxnsidpForwDatagrams. |
| CTR ibmxnsidpOutDiscards | 1.3.6.1.4.1.2.6.2.11.15 | Counter | read-only | Total number of outgoing IDP datagrams discarded. |
| CTR ibmxnsidpOutNoRoutes | 1.3.6.1.4.1.2.6.2.11.16 | Counter | read-only | Number of outgoing IDP datagrams discarded because no route was available to the specified destination. |
| CTR ibmxnsidpOutRequests | 1.3.6.1.4.1.2.6.2.11.11 | Counter | read-only | Number of IDP datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmxnsidpForwDatagrams. |
| CTR ibmxnsidpRoutingDiscards | 1.3.6.1.4.1.2.6.2.11.17 | Counter | read-only | Number of routing entries discarded even though they were valid. |
| CTR ibmxnsidpTooSmall | 1.3.6.1.4.1.2.6.2.11.20 | Counter | read-only | Number of IDP datagrams with len < the size of an IDP header. |
| CTR ibmxnsidpZeroDirBcast | 1.3.6.1.4.1.2.6.2.11.19 | Counter | read-only | Number of IDP datagrams forwarded to the system due to zeronet broadcast. |
| INT ibmxnsLoopbackActive | 1.3.6.1.4.1.2.6.2.11.4.1.5 | INTEGER | read-only | Indicates if this port will use the hardware to loopback locally addressed packets or return the packet to the system via a software loopback. |
| INT ibmxnsPortIfIndex | 1.3.6.1.4.1.2.6.2.11.4.1.1 | INTEGER | read-only | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface. |
| INT ibmxnsPortStatus | 1.3.6.1.4.1.2.6.2.11.4.1.2 | INTEGER | read-only | The status of the XNS protocol stack on this interface. |
| OCT ibmxnsRouteDest | 1.3.6.1.4.1.2.6.2.11.35.1.1 | OCTET STRING | read-only | The desination network of this route. |
| ibmxnsRouteEntry | 1.3.6.1.4.1.2.6.2.11.35.1 | not-accessible | An entry in the XNS route table. | |
| INT ibmxnsRouteIfIndex | 1.3.6.1.4.1.2.6.2.11.35.1.2 | INTEGER | read-only | The index value which identifies the local interface through which the next hop of this route should be reached. |
| INT ibmxnsRouteMetric | 1.3.6.1.4.1.2.6.2.11.35.1.4 | INTEGER | read-only | The hop count to the destination. |
| OCT ibmxnsRouteNextHop | 1.3.6.1.4.1.2.6.2.11.35.1.3 | OCTET STRING | read-only | The XNS network address of the next hop of this route. |
| ibmxnsRouteTable | 1.3.6.1.4.1.2.6.2.11.35 | not-accessible | The XNS Route Table. | |
| CTR ibmxnsRouteUse | 1.3.6.1.4.1.2.6.2.11.35.1.5 | Counter | read-only | Reference counter for this route. |
| INT swvpdAction | 1.3.6.1.4.1.2.6.2.4.2.1.1.9 | INTEGER | read-only | The action being performed on this software. |
| STR swvpdDateTime | 1.3.6.1.4.1.2.6.2.4.2.1.1.11 | DisplayString | read-only | A string indicating the date and time that the action in swvpdAction was performed on this software. |
| swVpdEntry | 1.3.6.1.4.1.2.6.2.4.2.1.1 | not-accessible | An entry for a piece of software installed on this router. | |
| INT swvpdFixId | 1.3.6.1.4.1.2.6.2.4.2.1.1.7 | INTEGER | read-only | The fix level identifier for this piece of software. |
| INT swvpdIndex | 1.3.6.1.4.1.2.6.2.4.2.1.1.1 | INTEGER | read-only | A unique value for each entry in this table. |
| INT swvpdModId | 1.3.6.1.4.1.2.6.2.4.2.1.1.6 | INTEGER | read-only | The modification level identifier for this piece of software. |
| STR swvpdName | 1.3.6.1.4.1.2.6.2.4.2.1.1.2 | DisplayString | read-only | The name of this software product. |
| INT swvpdPath | 1.3.6.1.4.1.2.6.2.4.2.1.1.10 | INTEGER | read-only | An indication of which part of the system this software is installed on. The values correspond to the following paths: root(1) /etc/objrepos usr(2) /usr/lib/objrepos share(3) /usr/share/lib/objrepos |
| STR swvpdPtfName | 1.3.6.1.4.1.2.6.2.4.2.1.1.3 | DisplayString | read-only | If this entry represents a PTF, this object contains the name of the PTF. Otherwise this object contains a string of zero length. |
| INT swvpdRelId | 1.3.6.1.4.1.2.6.2.4.2.1.1.5 | INTEGER | read-only | The release identifier for this piece of software. |
| INT swvpdState | 1.3.6.1.4.1.2.6.2.4.2.1.1.8 | INTEGER | read-only | The state of the action in swvpdAction being performed on this software. |
| swVpdTable | 1.3.6.1.4.1.2.6.2.4.2.1 | not-accessible | A table containing software vital product data information. | |
| INT swvpdVerId | 1.3.6.1.4.1.2.6.2.4.2.1.1.4 | INTEGER | read-only | The version identifier for this piece of software. |
RFC description
Vendor-private MIB for IBM 6611 networking equipment; management information for device monitoring and configuration.
Start monitoring IBM 6611 Nways Multiprotocol Router with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.