| OID symbolic | OID numeric | Type | Access | Description |
|---|
| usr | 1.3.6.1.4.1.429 | | | |
| nas | 1.3.6.1.4.1.429.1 | | | |
| ids0 | 1.3.6.1.4.1.429.1.16 | | | |
| ids0CfgTable | 1.3.6.1.4.1.429.1.16.1 | | not-accessible | A table of operator definable parameters for each DS0 |
| ids0CfgEntry | 1.3.6.1.4.1.429.1.16.1.1 | | not-accessible | There is one DS0 Configure entry for each DS0 timeslot in
the chassis |
| INT ids0CfgDs1Index | 1.3.6.1.4.1.429.1.16.1.1.1 | INTEGER | read-only | The index value which uniquely identifies the CSU to which
this entry is applicable. The value of ds0CfgDs1Index
matches the value of the index for the corresponding DS1
entity in the entity table of the chassis MIB. |
| INT ids0CfgDs0Index | 1.3.6.1.4.1.429.1.16.1.1.2 | INTEGER | read-only | The index value which uniquely identifies the timeslot of
the CSU to which this entry refers. |
| STR ids0CfgDs0Id | 1.3.6.1.4.1.429.1.16.1.1.3 | DisplayString | read-write | An operator definable string useful for easy identification
of a DS0 relative to the user application. |
| INT ids0CfgBlockCallType | 1.3.6.1.4.1.429.1.16.1.1.4 | INTEGER | read-write | An oject that defines the type of calls to be blocked by
the specified DS0. A value of blockAll(5) results in all
calls to this DS0 being blocked.
Default = blockNone(2). |
| INT ids0CfgDs0AssignedSlot | 1.3.6.1.4.1.429.1.16.1.1.5 | INTEGER | read-write | Defines which slot (1 thru 16) the specified DS0 is
restricted to connect with. A value of 17 indicates that
this DS0 is not restricted. If a value of 0 is returned,
it it indicatesthat this NAC does not support the
definition of this object.
Default = 17. |
| INT ids0CfgDs0AssignedChannel | 1.3.6.1.4.1.429.1.16.1.1.6 | INTEGER | read-write | Defines which channel of a modem the specified DS0 is
restricted to connect with. A value of 33 indicates that
this DS0 is not restricted. If a value of 0 is returned,
it it indicatesthat this NAC does not support the
definition of this object.
Default = 33. |
| INT ids0CfgDs0SrvcState | 1.3.6.1.4.1.429.1.16.1.1.7 | INTEGER | read-write | Defines the service state of a specified DS0. This object
does not apply to Rob Bit T1 operation.
Default =
inService(2). |
| INT ids0CfgNailUpDs0 | 1.3.6.1.4.1.429.1.16.1.1.8 | INTEGER | read-write | This will put a DS0 in either a normal or a Transparent
mode.
Normal Mode : This is a normal ds0.
Transparent Mode
: This provides clear ds0 channels to pass data between the
T1-PRI NAC and modems. |
| ids0StatTable | 1.3.6.1.4.1.429.1.16.2 | | not-accessible | USR's DS0 Status table contains various timeslot status
information. |
| ids0StatEntry | 1.3.6.1.4.1.429.1.16.2.1 | | not-accessible | There is one entry in the DS0 Status table for each
timeslot in the chassis. |
| INT ids0StatDs1Index | 1.3.6.1.4.1.429.1.16.2.1.1 | INTEGER | read-only | The index value which uniquely identifies the CSU to which
this entry is applicable. The value of ds0StatDs1Index
matches the value of the index for the coresponding DS1
entity in the entity table of the chassis MIB. |
| INT ids0StatDs0Index | 1.3.6.1.4.1.429.1.16.2.1.2 | INTEGER | read-only | The index value which uniquely identifies the timeslot of
the CSU to which this entry refers. The value of
ds0StatDs0Index matches the value of the index for the
corresponding DS0 entity in the entity table of the chassis
MIB. |
| INT ids0StatDs0 | 1.3.6.1.4.1.429.1.16.2.1.3 | INTEGER | read-only | This object indicates the current status of the specified
timeslot. The status values change dynamically with system
operation. |
| INT ids0StatDevConnTo | 1.3.6.1.4.1.429.1.16.2.1.4 | INTEGER | read-only | This object indicates the device currently connected. |
| INT ids0StatSlotConnTo | 1.3.6.1.4.1.429.1.16.2.1.5 | INTEGER | read-only | This object indicates the slot of the device currently
connected. Range = 0(none)-16. |
| INT ids0StatChanConnTo | 1.3.6.1.4.1.429.1.16.2.1.6 | INTEGER | read-only | This object indicates the channel of the device currently
connected. Default 255. |
| INT ids0StatDs0SrvcState | 1.3.6.1.4.1.429.1.16.2.1.7 | INTEGER | read-only | This is the current service state of a DS0. This object
does not apply to Rob Bit T1 operation. |
| INT ids0StatCallArrivalTime | 1.3.6.1.4.1.429.1.16.2.1.8 | INTEGER | not-accessible | This object indicates the call arrival time in GMT w/1 sec
resolution. |
| INT ids0StatCallConnectTime | 1.3.6.1.4.1.429.1.16.2.1.9 | INTEGER | not-accessible | This object indicates the call connect time in GMT w/1 sec
resolution. |
| INT ids0StatCallTerminateTime | 1.3.6.1.4.1.429.1.16.2.1.10 | INTEGER | not-accessible | This object indicates the call terminate time in GMT w/1
sec resolution. |
| INT ids0StatCallType | 1.3.6.1.4.1.429.1.16.2.1.11 | INTEGER | not-accessible | This object indicates the call type (analog or digital). |
| INT ids0StatCallBlockState | 1.3.6.1.4.1.429.1.16.2.1.12 | INTEGER | read-only | This object indicates current ids0 call block status. |
| INT ids0StatCallDirn | 1.3.6.1.4.1.429.1.16.2.1.13 | INTEGER | not-accessible | This object indicates the call dirn (in or out bound). |
| ids0CmdTable | 1.3.6.1.4.1.429.1.16.3 | | not-accessible | The DS0 Command table contains an entry for each of the
manageable timeslots in the chassis. It provides a means
through which to take specific actions on one or more
timeslots in the chassis. |
| ids0CmdEntry | 1.3.6.1.4.1.429.1.16.3.1 | | not-accessible | There is one entry in the DS0 Command table per timeslot in
the chassis. |
| INT ids0CmdDs1Index | 1.3.6.1.4.1.429.1.16.3.1.1 | INTEGER | read-only | The index value which uniquely identifies the CSU to which
this entry is applicable. The value of ds0CmdDs1Index
matches the value of the index for the corresponding DS1
entity in the entity table of the chassis MIB. |
| INT ids0CmdDs0Index | 1.3.6.1.4.1.429.1.16.3.1.2 | INTEGER | read-only | The index which uniquely identifies the timeslot of the
specified CSU to which this entry is applicable. |
| OCT ids0CmdMgtStationId | 1.3.6.1.4.1.429.1.16.3.1.3 | OCTET STRING | read-write | This object is a generic read-write variable that a
Management Station (MS) can use to guarantee that the
results from a given command are the results of a command
issued by that specific MS. Each MS must SET a unique
value to this object when doing commands and GET the value
of this object together with ds0CmdReqId and ds0CmdResult
to detect interference from other MSs. |
| INT ids0CmdReqId | 1.3.6.1.4.1.429.1.16.3.1.4 | INTEGER | read-only | This object contains the value of the request-id field in
the SNMP PDU which invoked the current or most recent
command on this DS0 entity. If the request-id is unknown
or undefined, this object contains the zero value. |
| INT ids0CmdFunction | 1.3.6.1.4.1.429.1.16.3.1.5 | INTEGER | read-write | This object contains a value that identifies the command
being requested. |
| INT ids0CmdForce | 1.3.6.1.4.1.429.1.16.3.1.6 | INTEGER | read-write | In some cases, the DS0 entity may be in a state such that
certain commands could adversely affect connections. In
such cases, a command request with ds0CmdForce not defined,
or set to noForce will result in a warning. If the
operator elects to ignore such warnings, ds0CmdForce can be
set to force in a re-issued request and the command will be
carried out regardless of its potentially hazzardous
effects. |
| OCT ids0CmdParam | 1.3.6.1.4.1.429.1.16.3.1.7 | OCTET STRING | read-write | This object contains parameters that are specific to the
particular command being issued. In some cases, there will
be no additional parameters required. |
| INT ids0CmdResult | 1.3.6.1.4.1.429.1.16.3.1.8 | INTEGER | read-only | This object contains the result of the most recently
requested command, or the value none(1) if no commands have
been requested since the last reset. |
| INT ids0CmdCode | 1.3.6.1.4.1.429.1.16.3.1.9 | INTEGER | read-only | The value of this object upon command completion indicates
a further description of what went wrong if the command was
unsuccessful. |
| ids0BulkAccessTable | 1.3.6.1.4.1.429.1.16.4 | | not-accessible | A table of parameters for each DS0 accessed in a bulk
format |
| ids0BulkAccessEntry | 1.3.6.1.4.1.429.1.16.4.1 | | not-accessible | There is one bulk DS0 access for each DS1 in the chassis |
| INT ids0BulkAccessDs1Index | 1.3.6.1.4.1.429.1.16.4.1.1 | INTEGER | read-only | The index value which uniquely identifies the CSU to which
this entry is applicable. The value of
ds0BulkAccessDs1Index matches the value of the index for
the corresponding DS1 entity in the entity table of the
chassis MIB. |
| OCT ids0BulkAccessStatDs0Mdm | 1.3.6.1.4.1.429.1.16.4.1.2 | OCTET STRING | read-only | This object contains all of the ids0Stat table parameters
for all the DS0's on the DS1 |
