Hub-rptr-prvt

All MIBs › Hub-rptr-prvt

Category: Device Management, Technology: Switching/L2

Description: Private repeater MIB providing vendor-specific extensions to standard hub/repeater management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Hub-rptr-prvt?

Hub-rptr-prvt is a vendor-private extension MIB layered on top of the standard IEEE 802.3 Repeater MIB, adding proprietary objects for hub/repeater devices used in legacy shared-Ethernet networks. It exposes low-level hardware and link-layer fault counters for repeater ports and groups, such as descriptor overflow counts, memory errors, and jabber events, plus management-connection port information. Its central use is hardware fault monitoring: rptrMemoryErrors and the descriptor overflow counters reveal internal buffer or memory faults in the repeater hardware, rptrJabberCounter flags malfunctioning stations flooding the segment with jabber signals, and the rptrfmGroupTable's status objects report the global operational health of each repeater group/module. As a private extension it clearly depends on and complements the standard Repeater MIB (RFC 1516/2108) for baseline repeater management objects. This MIB is deployed on legacy Ethernet hub/repeater hardware in older shared-media LAN segments, largely from a specific hub vendor's product line predating switched Ethernet, and technicians maintaining this equipment can download the Hub-rptr-prvt file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Hub-rptr-prvt. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ethernet hub/repeater (legacy shared-media device)

Monitoring Examples

An operator would poll rptrfmGroupTable/rptrfmGroupEntry, indexed by rptrGroupIndex, to read rptrGroupGlobalStatus and rptrGroupPrevStatus, catching a transition from normal to a fault status that indicates a repeater group has failed or degraded. Rising rptrRxDscrptrOverFlow or rptrTxDscrptrOverFlow counts alongside rptrMemoryErrors would point to a hardware buffer or memory problem inside the repeater needing replacement. A climbing rptrJabberCounter would identify a misbehaving NIC on the segment continuously jabbering and disrupting shared-media traffic.

What Can Be Monitored

repeater group status
receive/transmit descriptor overflow counts
internal memory errors
jabber event count
management connection port

Imported Objects

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
OBJECT-TYPE
internet

From SNMP-REPEATER-MIB

rptrPortAdminStatus	OBJECT-TYPE
rptrPortGroupIndex	OBJECT-TYPE
rptrPortIndex	OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
enterprises	1.3.6.1.4.1
fibronics	1.3.6.1.4.1.22
fm800	1.3.6.1.4.1.22.51
fmdebug	1.3.6.1.4.1.22.51.6
fmdiag	1.3.6.1.4.1.22.51.5
fmethrptr	1.3.6.1.4.1.22.51.11
fmlu	1.3.6.1.4.1.22.51.3
fmslot	1.3.6.1.4.1.22.51.2
fmsystem	1.3.6.1.4.1.22.51.1
fmsystemperm	1.3.6.1.4.1.22.51.1.2
fmsystemrun	1.3.6.1.4.1.22.51.1.1
private	1.3.6.1.4
INT rptrEDBPort	1.3.6.1.4.1.22.51.11.1.6	INTEGER	read-only	Returns the port number which the MultiHub (EDB) is connected to. if the MultiHub is not connected to the card the value returned will be 99, if the card is installed in a stand alone chassis then reading this object will return 99
rptrfmGroupEntry	1.3.6.1.4.1.22.51.11.2.1.1		not-accessible
rptrfmGroupTable	1.3.6.1.4.1.22.51.11.2.1		not-accessible
rptrgroup	1.3.6.1.4.1.22.51.11.2
INT rptrGroupAutoPartition	1.3.6.1.4.1.22.51.11.2.1.1.9	INTEGER	read-only	Group Auto partition Fault status. If the value is one - at least one of the ports is in auto-partition.
INT rptrGroupBackupHead1State	1.3.6.1.4.1.22.51.11.2.1.1.14	INTEGER	read-write	Enable the user to enable or disable the backup port for Head module only in 303 cards. when set to enabled(1) the active port will be the primary port, when set to disabled(2) the active port will be the secondary port and when set to normal(3) the active port will be set by the backup algorithm
INT rptrGroupCpuError	1.3.6.1.4.1.22.51.11.2.1.1.6	INTEGER	read-only	CPU Fault status. If the value is one - there is a CPU fault in the card.
NTF rptrGroupCPUFaultStatus	1.3.6.1.4.1.22.51.11.0.3			Issued when a CPU fault is detected
NTF rptrGroupDetachEdbPort	1.3.6.1.4.1.22.51.11.0.12			Issued when the port connected to the EDB Is not dettached by a detach command received from the NMS
NTF rptrGroupDetachNmsPort	1.3.6.1.4.1.22.51.11.0.9			Issued when the port connected to the NMS Is not dettached by a detach command received from the NMS
INT rptrGroupDetachStatus	1.3.6.1.4.1.22.51.11.2.1.1.10	INTEGER	read-only	Global Detach status. If the value is one - at least one of the ports is detached.
INT rptrGroupGlobalCommandCode	1.3.6.1.4.1.22.51.11.2.1.1.11	INTEGER	read-write	Enable the user to attach/detach all repeater ports. Note: in case off detach command - all port will detach except the port on which the last NMS message was received. when reading this object the value returned is always attach-all-ports(1)
INT rptrGroupGlobalError	1.3.6.1.4.1.22.51.11.2.1.1.4	INTEGER	read-only	Group Global Fault status. If the value is one - there is a fault in the card.
OCT rptrGroupGlobalStatus	1.3.6.1.4.1.22.51.11.2.1.1.2	OCTET STRING	read-only	8 bytes. 60 status bits of the card. For more information about the meaning of the status, read the specific user manual of each card. The channel leds are encoded into 2 bytes.
NTF rptrGroupHead1BackupMainActive	1.3.6.1.4.1.22.51.0.10			Indicates that the MAIN link is active
NTF rptrGroupHead1BackupSecondActive	1.3.6.1.4.1.22.51.0.11			Indicates that the SECOND link is active
INT rptrGroupIndex	1.3.6.1.4.1.22.51.11.2.1.1.1	INTEGER	read-only	Group Number
INT rptrGroupJabberError	1.3.6.1.4.1.22.51.11.2.1.1.5	INTEGER	read-only	Jabber Fault status. If the value is one - there is a jabber event.
NTF rptrGroupJabberFaultStatus	1.3.6.1.4.1.22.51.11.0.2			Issued when the port enters the jabber lock state
INT rptrGroupLinkSelectHead1	1.3.6.1.4.1.22.51.11.2.1.1.13	INTEGER	read-write	Enable the user to switch between MAIN and SECOND link only in Head module in the 303 type cards.
INT rptrGroupMaxModuleNumber	1.3.6.1.4.1.22.51.11.2.1.1.16	INTEGER	read-only	Maximum Number of modules in a group.
INT rptrGroupMIndex	1.3.6.1.4.1.22.51.11.4.1.1.1	INTEGER	read-only	Group Number
rptrgroupmodule	1.3.6.1.4.1.22.51.11.4
INT rptrGroupModuleBackupState	1.3.6.1.4.1.22.51.11.4.1.1.4	INTEGER	read-write	Enable the user to overide the backup switch (enable/disable). or let the state be as the switch is (hardware) This object applies only to the 308 card. setting this object will take effect only after the next reset or power up of the card.
rptrGroupModuleEntry	1.3.6.1.4.1.22.51.11.4.1.1		read-write
INT rptrGroupModuleIndex	1.3.6.1.4.1.22.51.11.4.1.1.2	INTEGER	read-only	Module Number
INT rptrGroupModuleStructInfo	1.3.6.1.4.1.22.51.11.4.1.1.3	INTEGER	read-only	List of modules numnbers: eM892.330 /* BLANK / EM892.331 / FO single port / EM892.332 / FO dual port / EM892.333 / COAX single port / EM892.334 / COAX dual port / EM892.332B / FO dual port for Dual Homing / EM892.335 / 10BASET single port / EM892.337 / DTE / EM892.336 / 10BASET dual port / EM892.339 / AUI */
rptrGroupModuleTable	1.3.6.1.4.1.22.51.11.4.1		not-accessible
INT rptrGroupPIndex	1.3.6.1.4.1.22.51.11.3.1.1.1	INTEGER	read-only	Group Number
rptrgroupport	1.3.6.1.4.1.22.51.11.3
CTR rptrGroupPortAutoPartitionCount	1.3.6.1.4.1.22.51.11.3.1.1.6	Counter	read-only	This counter is incremented evry time there is a Auto Partition state in the port.
NTF rptrGroupPortAutoPartitionStatus	1.3.6.1.4.1.22.51.11.0.6			Issued when the port is auto partitioned
INT rptrGroupPortAutoPartitionType	1.3.6.1.4.1.22.51.11.3.1.1.7	INTEGER	read-only	Auto Partition type.
rptrGroupPortEntry	1.3.6.1.4.1.22.51.11.3.1.1		read-write
INT rptrGroupPortIndex	1.3.6.1.4.1.22.51.11.3.1.1.2	INTEGER	read-only	Port Number
CTR rptrGroupPortLinkFaultCounter	1.3.6.1.4.1.22.51.11.3.1.1.5	Counter	read-only	This counter is incremented evry time a link change is detected in the port. A link change is encountered on the port whenever the link is disappearing or apearing on the port
INT rptrGroupPortLinkStatus	1.3.6.1.4.1.22.51.11.3.1.1.3	INTEGER	read-only	When the value is 1, link status is O.K.
NTF rptrGroupPortLinkStatus2	1.3.6.1.4.1.22.51.11.0.8			Issued when the link status of the port changed its status
INT rptrGroupPortRcvStatus	1.3.6.1.4.1.22.51.11.3.1.1.4	INTEGER	read-only	This object describes the receive status of the port, When a port is receiveing data the object gets the value receive(1), when the port does not receive any data the object gets the value no-receive(2)
NTF rptrGroupPortStatus	1.3.6.1.4.1.22.51.11.0.1			Issued when the port changed its status
rptrGroupPortTable	1.3.6.1.4.1.22.51.11.3.1		not-accessible
OCT rptrGroupPrevStatus	1.3.6.1.4.1.22.51.11.2.1.1.3	OCTET STRING	read-only	8 bytes. Previous 60 status bits of the card. This object id is used mainly for traps (see Card Trap)
INT rptrGroupRepeaterBlockError	1.3.6.1.4.1.22.51.11.2.1.1.8	INTEGER	read-only	Repeater Block Fault status. If the value is one - there is a fault in the repeater block.
NTF rptrGroupRepeaterBlockFaultStatus	1.3.6.1.4.1.22.51.11.0.5			Issued when a repeater block error is detected
INT rptrGroupSQE	1.3.6.1.4.1.22.51.11.2.1.1.7	INTEGER	read-only	Group SQE Fault status (for AUI module (339)). If the value is one - there is an SQE indication to the card.
NTF rptrGroupSQEStatus	1.3.6.1.4.1.22.51.11.0.4			Issued when a SQE error is detected
INT rptrGroupTailState	1.3.6.1.4.1.22.51.11.2.1.1.15	INTEGER	read-write	Enable the user to enable or disable Tail in 303 card
NTF rptrGroupTrap	1.3.6.1.4.1.22.51.11.0.7			Generated when a significant status has changed in a group. By xoring the 2 statuses, the NMS can identify the cause of the trap.
INT rptrGroupTrapMask	1.3.6.1.4.1.22.51.11.2.1.1.12	INTEGER	read-write	When setting this variable to mask-info(4) then only all traps will be sent. When setting this variable to mask-warn(3) then only traps with severity of warn or fatal will be sent.When setting this variable to mask-fatal(2) then only traps with severity of fatal will be sent. When setting this variable to mask-all(1) then no traps will be sent.
rptrinfo	1.3.6.1.4.1.22.51.11.1
CTR rptrJabberCounter	1.3.6.1.4.1.22.51.11.1.4	Counter	read-only	This counter is incremented evry time there is a jubber in one of the ports.
CTR rptrMemoryErrors	1.3.6.1.4.1.22.51.11.1.3	Counter	read-only	This counter is incremented evry time there is a memory error
INT rptrNMSConnectionPort	1.3.6.1.4.1.22.51.11.1.5	INTEGER	read-only	Returns the port number which the NMS is connected.
CTR rptrRxDscrptrOverFlow	1.3.6.1.4.1.22.51.11.1.1	Counter	read-only	This counter reflects the number of the missed received packets due to lack of resourcees such as descriptors or memory buffers
CTR rptrTxDscrptrOverFlow	1.3.6.1.4.1.22.51.11.1.2	Counter	read-only	This counter is incremented evry time there is a transmit over flow
trap	1.3.6.1.4.1.22.3
traperm	1.3.6.1.4.1.22.3.2
traprun	1.3.6.1.4.1.22.3.1
trapvar	1.3.6.1.4.1.22.3.3

RFC description

Fibronics Ethernet repeater private MIB for NM129 hub components and port management.

Start monitoring Legacy Fibronics Ethernet hub/repeater (shared-media device) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Hub-rptr-prvt

What Is Hub-rptr-prvt?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description