HUAWEI-WLAN-UPDATE-MIB

All MIBs › HUAWEI-WLAN-UPDATE-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2014-11-27

Category: Technology: Wireless, Vendor: Huawei, Wireless and WLAN

Description: Huawei WLAN MIB for managing software updates and firmware distribution to WLAN devices under a wireless LAN controller.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-WLAN-UPDATE-MIB?

HUAWEI-WLAN-UPDATE-MIB is a Huawei-proprietary module for managing centralized software/firmware updates pushed from a WLAN Access Controller to its managed access points. It exposes each AP's current firmware version, the target update image, and the status of an in-progress, successful, or failed update task. Its monitoring purpose maps directly to software version and job/queue status: tracking whether each AP has successfully completed its firmware update task, or is stuck in progress or failed, is essential during a mass firmware rollout. It works within Huawei's broader WLAN AC-AP management framework, which coordinates AP discovery, configuration, and now firmware distribution from the controller. It is typically deployed on Huawei WLAN Access Controllers managing fleets of access points that require centralized, controller-initiated firmware updates. Engineers can download the HUAWEI-WLAN-UPDATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-WLAN-UPDATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei WLAN Access Controllers and access points (AP)

Monitoring Examples

An admin would poll an AP update-task table (an hwWlanApUpdateTable/hwWlanApUpdateEntry pattern) for each AP's current firmware version, target version, and update-task status. During a mass rollout, APs whose task status remains stuck in-progress or shows failed are the ones needing a manual re-trigger or a check for a download/connectivity issue. Comparing current versus target firmware version across the fleet confirms the rollout has fully completed before it is marked done.

What Can Be Monitored

AP firmware/software version
update task status (in-progress/success/failed)
target software image
update rollout progress across AP fleet

Imported Objects

From HUAWEI-WLAN-DEVICE-MIB

hwApIndex	OBJECT-TYPE
hwApMac	OBJECT-TYPE
hwApRegionIndex	OBJECT-TYPE
hwApType	OBJECT-TYPE

From HUAWEI-WLAN-MIB

hwWlan

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwWlanUpdate	1.3.6.1.4.1.2011.6.139.7			The MIB module defines the AP update operation.
hwWlanUpdateNotifications	1.3.6.1.4.1.2011.6.139.7.1
NTF hwApUpdateBeginNotify	1.3.6.1.4.1.2011.6.139.7.1.1			This notification occurs when ap begin to update.
NTF hwApUpdateResultNotify	1.3.6.1.4.1.2011.6.139.7.1.2			This notification occurs when ap has updated successfully or failed.
NTF hwApUpdateUbootNotMatchNotify	1.3.6.1.4.1.2011.6.139.7.1.3			This notification occurs when ap uboot not match version.
hwWlanUpdateNotifyObjects	1.3.6.1.4.1.2011.6.139.7.2
INT hwApUpdateResult	1.3.6.1.4.1.2011.6.139.7.2.1	INTEGER	read-only	Ap update result. 1 means success 2 means failure, unknown error 3 means failure, insufficient AP memory 4 means failure, fail to download the file 5 means failure, mismatch between the version in the EFS tail and the version in the file name 6 means failure, invalid file name 7 means failure, mismatch between the AP type in the EFS tail and the AP 8 means failure, file content error 9 means failure, writing flash memory failure 10 means failure, upgrade timeout 11 means failure, the communication between AP and AC fails
OCT hwApUpdateTime	1.3.6.1.4.1.2011.6.139.7.2.2	OCTET STRING	read-only	Description.
OCT hwApUpdateByFileName	1.3.6.1.4.1.2011.6.139.7.2.3	OCTET STRING	read-only	Description.
INT hwApUpdateNextOper	1.3.6.1.4.1.2011.6.139.7.2.4	INTEGER	read-only	Description.
OCT hwApUpdateResultStatus	1.3.6.1.4.1.2011.6.139.7.2.5	OCTET STRING	read-only	Description.
hwApUpdateObjects	1.3.6.1.4.1.2011.6.139.7.3
hwApUpdateConfig	1.3.6.1.4.1.2011.6.139.7.3.1
IP hwApUpdateFTPIPAddress	1.3.6.1.4.1.2011.6.139.7.3.1.1	IpAddress	read-write	FTP Server IP for Ap Update.
OCT hwApUpdateFTPUsername	1.3.6.1.4.1.2011.6.139.7.3.1.2	OCTET STRING	read-write	FTP Client Username for Ap Update.
OCT hwApUpdateFTPPassword	1.3.6.1.4.1.2011.6.139.7.3.1.3	OCTET STRING	read-write	FTP Client Password for Ap Update.
INT hwApUpdateMode	1.3.6.1.4.1.2011.6.139.7.3.1.4	INTEGER	read-write	The mode of Ap Update. ftp(1): Ap Image Update by ftp. ac(2): Ap Image Update by ac-ap protocol.
IP hwApUpdateSFTPIPAddress	1.3.6.1.4.1.2011.6.139.7.3.1.5	IpAddress	read-write	Description.
OCT hwApUpdateSFTPUsername	1.3.6.1.4.1.2011.6.139.7.3.1.6	OCTET STRING	read-write	Description.
OCT hwApUpdateSFTPPassword	1.3.6.1.4.1.2011.6.139.7.3.1.7	OCTET STRING	read-write	Description.
I32 hwApUpdateFTPMaxConnectNum	1.3.6.1.4.1.2011.6.139.7.3.1.8	Integer32	read-write	Description.
I32 hwApUpdateSFTPMaxConnectNum	1.3.6.1.4.1.2011.6.139.7.3.1.9	Integer32	read-write	Description.
OCT hwApUpdateFTPIPv6Address	1.3.6.1.4.1.2011.6.139.7.3.1.10	OCTET STRING	read-write	Description.
OCT hwApUpdateSFTPIPv6Address	1.3.6.1.4.1.2011.6.139.7.3.1.11	OCTET STRING	read-write	Description.
hwApUpdateTable	1.3.6.1.4.1.2011.6.139.7.3.2		not-accessible	Ap Update Table. The index of this table is hwApType.
hwApUpdateEntry	1.3.6.1.4.1.2011.6.139.7.3.2.1		not-accessible	Ap UpdateEntry.
OCT hwApUpdateFilename	1.3.6.1.4.1.2011.6.139.7.3.2.1.1	OCTET STRING	read-create	The ap image filename of ap update.
OCT hwApUpdateResultMask	1.3.6.1.4.1.2011.6.139.7.3.2.1.2	OCTET STRING	read-only	The result of ap update. Every bit is used to describe the ap updated successfully or unsuccessfully. 0 means success, and 1 means unsuccess. The value of this node is hexadecimal integer block. Each Byte describes 8 aps are updated successfully or unsuccessfully. For example, the first Byte describes ap 0~7 is updated successfully or unsuccessfully, and the second Byte describes ap 8~15 is updated successfully or unsuccessfully. Such as, if only ap 0,4,5,6,7,9 is updated unsuccessfully, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2.
INT hwApUpdateAdminOper	1.3.6.1.4.1.2011.6.139.7.3.2.1.3	INTEGER	read-create	Ap update administration operation. start(1): start ap update. reset(2): reset all the ap with specifed type after update finished
I32 hwApUpdatePercent	1.3.6.1.4.1.2011.6.139.7.3.2.1.4	Integer32	read-only	The percentage is only used for a online update operation. If the update begins, the percentage becomes 1. when some AP's update is finished, the percentage stands for the percentage which is the number of APs upgraded to the total number of APs. If the update is finished, the percentage will be 100.
ROW hwApUpdateRowStatus	1.3.6.1.4.1.2011.6.139.7.3.2.1.5	RowStatus	read-create	Row status: mainly to support to add or delete the relationship of ap's type and the update filename. createAndGo(4): add a relationship. destroy(6): delete the relationship.
OCT hwApUpdateResultInfo	1.3.6.1.4.1.2011.6.139.7.3.2.1.6	OCTET STRING	read-only	The result of ap update. Every bit is used to describe the ap updated successfully or unsuccessfully. 0 means success, and 1 means unsuccess. The value of this node is hexadecimal integer block. Each Byte describes 8 aps are updated successfully or unsuccessfully. For example, the first Byte describes ap 0~7 is updated successfully or unsuccessfully, and the second Byte describes ap 8~15 is updated successfully or unsuccessfully. Such as, if only ap 0,4,5,6,7,9 is updated unsuccessfully, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2.
OCT hwApUpdateApIdSetMask	1.3.6.1.4.1.2011.6.139.7.3.2.1.7	OCTET STRING	read-write	Description.
hwApUpdateProgressTable	1.3.6.1.4.1.2011.6.139.7.3.3		not-accessible	Description.
hwApUpdateProgressEntry	1.3.6.1.4.1.2011.6.139.7.3.3.1		not-accessible	Description.
INT hwApUpdateProgressStatus	1.3.6.1.4.1.2011.6.139.7.3.3.1.1	INTEGER	read-only	Description.
I32 hwApUpdateProgress	1.3.6.1.4.1.2011.6.139.7.3.3.1.2	Integer32	read-only	Description.
I32 hwApFlashProgress	1.3.6.1.4.1.2011.6.139.7.3.3.1.3	Integer32	read-only	Description.
hwMacApUpdateProgressTable	1.3.6.1.4.1.2011.6.139.7.3.4		not-accessible	Description.
hwMacApUpdateProgressEntry	1.3.6.1.4.1.2011.6.139.7.3.4.1		not-accessible	Description.
INT hwMacApUpdateProgressStatus	1.3.6.1.4.1.2011.6.139.7.3.4.1.1	INTEGER	read-only	Description.
I32 hwMacApUpdateProgress	1.3.6.1.4.1.2011.6.139.7.3.4.1.2	Integer32	read-only	Description.
I32 hwMacApFlashProgress	1.3.6.1.4.1.2011.6.139.7.3.4.1.3	Integer32	read-only	Description.
hwSingleApUpdateTable	1.3.6.1.4.1.2011.6.139.7.3.5		not-accessible	Description.
hwSingleApUpdateEntry	1.3.6.1.4.1.2011.6.139.7.3.5.1		not-accessible	Description.
INT hwSingleApUpdateAdminOper	1.3.6.1.4.1.2011.6.139.7.3.5.1.1	INTEGER	read-write	Description.
I32 hwSingleApUpdatePercent	1.3.6.1.4.1.2011.6.139.7.3.5.1.2	Integer32	read-only	Description.
INT hwSingleApUpdateResult	1.3.6.1.4.1.2011.6.139.7.3.5.1.3	INTEGER	read-only	Description.
OCT hwSingleApUpdateFilename	1.3.6.1.4.1.2011.6.139.7.3.5.1.4	OCTET STRING	read-create	Description.
hwMacSingleApUpdateTable	1.3.6.1.4.1.2011.6.139.7.3.6		not-accessible	Description.
hwMacSingleApUpdateEntry	1.3.6.1.4.1.2011.6.139.7.3.6.1		not-accessible	Description.
INT hwMacSingleApUpdateAdminOper	1.3.6.1.4.1.2011.6.139.7.3.6.1.1	INTEGER	read-write	Description.
I32 hwMacSingleApUpdatePercent	1.3.6.1.4.1.2011.6.139.7.3.6.1.2	Integer32	read-only	Description.
INT hwMacSingleApUpdateResult	1.3.6.1.4.1.2011.6.139.7.3.6.1.3	INTEGER	read-only	Description.
OCT hwMacSingleApUpdateFilename	1.3.6.1.4.1.2011.6.139.7.3.6.1.4	OCTET STRING	read-create	Description.
hwApTypeRegionUpdateTable	1.3.6.1.4.1.2011.6.139.7.3.7		not-accessible	Description.
hwApTypeRegionUpdateEntry	1.3.6.1.4.1.2011.6.139.7.3.7.1		not-accessible	Description.
OCT hwApTypeRegionUpdateFilename	1.3.6.1.4.1.2011.6.139.7.3.7.1.1	OCTET STRING	read-write	Description.
OCT hwApTypeRegionUpdateResultMask	1.3.6.1.4.1.2011.6.139.7.3.7.1.2	OCTET STRING	read-only	Description.The result of ap update. Every bit is used to describe the ap updated successfully or unsuccessfully. 0 means success, and 1 means unsuccess. The value of this node is hexadecimal integer block. Each Byte describes 8 aps are updated successfully or unsuccessfully. For example, the first Byte describes ap 0~7 is updated successfully or unsuccessfully, and the second Byte describes ap 8~15 is updated successfully or unsuccessfully. Such as, if only ap 0,4,5,6,7,9 is updated unsuccessfully, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2.
INT hwApTypeRegionUpdateAdminOper	1.3.6.1.4.1.2011.6.139.7.3.7.1.3	INTEGER	read-write	Description.
I32 hwApTypeRegionUpdatePercent	1.3.6.1.4.1.2011.6.139.7.3.7.1.4	Integer32	read-only	Description.
ROW hwApTypeRegionUpdateRowStatus	1.3.6.1.4.1.2011.6.139.7.3.7.1.5	RowStatus	read-create	Description.
OCT hwApTypeRegionUpdateResultInfo	1.3.6.1.4.1.2011.6.139.7.3.7.1.6	OCTET STRING	read-only	Description.
hwWlanUpdateObjects	1.3.6.1.4.1.2011.6.139.7.4
hwWlanUpdateConformance	1.3.6.1.4.1.2011.6.139.7.5
hwWlanUpdateCompliances	1.3.6.1.4.1.2011.6.139.7.5.1
hwWlanUpdateCompliance	1.3.6.1.4.1.2011.6.139.7.5.1.1			Description.
hwWlanUpdateObjectGroups	1.3.6.1.4.1.2011.6.139.7.5.2
hwWlanUpdateNotificationsGroup	1.3.6.1.4.1.2011.6.139.7.5.2.1			Description.
hwWlanUpdateNotifyObjectsGroup	1.3.6.1.4.1.2011.6.139.7.5.2.2			Description.
hwApUpdateObjectsGroup	1.3.6.1.4.1.2011.6.139.7.5.2.3			Description.

RFC description

Controls and monitors wireless access point firmware update operations and status for Huawei WLAN systems.

Start monitoring Huawei WLAN Access Controller and access points (centralized firmware update) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-WLAN-UPDATE-MIB

What Is HUAWEI-WLAN-UPDATE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description