All MIBs › HUAWEI-WLAN-SYS-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2014-10-23
Category: Technology: Wireless, Vendor: Huawei, Wireless and WLAN
Description: Huawei WLAN MIB for managing system-level WLAN parameters and overall wireless controller system status.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-WLAN-SYS-MIB?
HUAWEI-WLAN-SYS-MIB is a Huawei proprietary MIB holding system-wide wireless controller settings and trap-restraint (suppression) configuration. Its objects cover a global trap-restrain-all flag, severity-based trap restraint, per-region and per-AP trap restraint index masks, carrier and controller identifiers, forwarding mode, network-element numbering, maximum AP-access count, and country code (regulatory domain). As a configuration MIB it lets an administrator confirm the controller's regulatory country code and check whether trap suppression is masking notifications that should otherwise be visible. It is deployed on Huawei wireless LAN controllers (AC). Engineers can download the HUAWEI-WLAN-SYS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-WLAN-SYS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei wireless LAN controllers (AC)
Monitoring Examples
An administrator troubleshooting a missing AP-down alert checks hwWlanTrapRestrainAll and the per-AP restraint mask to confirm whether trap suppression is unintentionally hiding notifications for that AP.
What Can Be Monitored
- trap restraint/suppression configuration
- country code and AP-access capacity
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-WLAN-MIB
| hwWlan | MODULE-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwWlanSysManagement | 1.3.6.1.4.1.2011.6.139.1 | add table of hwWlanStaIpv6Switch,and notes for sta ipv6 service. | ||
| hwWlanTrapRestrain | 1.3.6.1.4.1.2011.6.139.1.1 | |||
| INT hwWlanTrapRestrainAll | 1.3.6.1.4.1.2011.6.139.1.1.1 | INTEGER | read-write | All wlan trap restrain switch. If this switch is enabled, all the traps on ac will not be sent. |
| hwWlanTrapSeverityRestrain | 1.3.6.1.4.1.2011.6.139.1.1.2 | |||
| INT hwWlanTrapSeverityRestrainSeverity | 1.3.6.1.4.1.2011.6.139.1.1.2.1 | INTEGER | read-write | Wlan trap restrain by severity. critical: means the trap whose severity is not higner than critical will not be sent. major: means the trap whose severity is not higner than major will not be sent. minor: means the trap whose severity is not higner than minor will not be sent. warning: means the trap whose severity is not higner than warning will not be sent. none: means all the severities of traps can be sent. |
| hwWlanApRegionTrapRestrain | 1.3.6.1.4.1.2011.6.139.1.1.3 | |||
| OCT hwWlanApRegionTrapRestrainRegionIndexMask | 1.3.6.1.4.1.2011.6.139.1.1.3.1 | OCTET STRING | read-write | Wlan trap restrain by ap region. Every bit is used to describe the region's trap will be restrained or not. 0 means not restrain, and 1 means restrain. Each Byte describes 8 regions are restrained or not. The value of this node is hexadecimal integer block. For example, the first Byte describes region 0~7 is restrained or not, and the second Byte describes region 8~15 is restrained or not. Such as, if only region 0,4,5,6,7,9 is restrain, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2. |
| hwWlanApTrapRestrain | 1.3.6.1.4.1.2011.6.139.1.1.4 | |||
| OCT hwWlanApTrapRestrainApIndexMask | 1.3.6.1.4.1.2011.6.139.1.1.4.1 | OCTET STRING | read-write | Wlan trap restrain by ap. Every bit is used to describe the ap's trap will be restrained or not. 0 means not restrain, and 1 means restrain. Each Byte describes 8 aps are restrained or not. The value of this node is hexadecimal integer block. For example, the first Byte describes ap 0~7 is restrained or not, and the second Byte describes ap 8~15 is restrained or not. Such as, if only ap 0,4,5,6,7,9 is restrain, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2. |
| hwWlanSysPara | 1.3.6.1.4.1.2011.6.139.1.2 | |||
| INT hwWlanCarrierId | 1.3.6.1.4.1.2011.6.139.1.2.1 | INTEGER | read-write | The carrier identification. cmcc means 'China mobile communications corporation' , ctc means 'China telecom company' , cuc means 'China unicom company', other means 'Other company', |
| I32 hwWlanAcId | 1.3.6.1.4.1.2011.6.139.1.2.2 | Integer32 | read-write | The ac identification. The carrier must set ac id and carrier id before use. In this case, APs can check each other whether blong to a same AC. |
| INT hwWlanForwardMode | 1.3.6.1.4.1.2011.6.139.1.2.3 | INTEGER | read-write | AC forward mode.It can be set ess(1): ess mode ap(2): ap mode |
| OCT hwWlanAcNEnumber | 1.3.6.1.4.1.2011.6.139.1.2.4 | OCTET STRING | read-write | Description. |
| I32 hwWlanAcAccessMaxApNumber | 1.3.6.1.4.1.2011.6.139.1.2.5 | Integer32 | read-only | Description. |
| OCT hwAcCountryCode | 1.3.6.1.4.1.2011.6.139.1.2.6 | OCTET STRING | read-write | Description. |
| OCT hwWlanApUsername | 1.3.6.1.4.1.2011.6.139.1.2.8 | OCTET STRING | read-write | Description: When set, need to together with password, and the username length is 4 to 31 characters. |
| OCT hwWlanApPassword | 1.3.6.1.4.1.2011.6.139.1.2.9 | OCTET STRING | read-write | Description: When set, need to together with username, and the password length is 8 to 32 characters which must contain at least one capital letter, one lowcase letter and one number. |
| I32 hwWlanUsernamePasswordApId | 1.3.6.1.4.1.2011.6.139.1.2.10 | Integer32 | read-write | Description: The node is useful only when get the username or password and must be set first and read with username or password. When get the username or password without the node ,it means get the gloable configuration from AC, otherwise, it means get the specified AP' username or password from AP. For when change the username or password,and not commit, the AC's configuration is diffrent with AP' real configuration. When specified the AP ID , and the AP is not in the normal state, return the username or password from AC's gloable configuration. |
| INT hwWlanApLldpSwitch | 1.3.6.1.4.1.2011.6.139.1.2.11 | INTEGER | read-write | Description: Global AP LLDP switch. |
| I32 hwWlanAcAccessMaxStaNumber | 1.3.6.1.4.1.2011.6.139.1.2.12 | Integer32 | read-only | Description. |
| INT hwWlanAcDtlsSwitch | 1.3.6.1.4.1.2011.6.139.1.2.13 | INTEGER | read-write | Description. |
| OCT hwWlanAcDtlsPsk | 1.3.6.1.4.1.2011.6.139.1.2.14 | OCTET STRING | read-write | Description. |
| I32 hwWlanApLogManualBackupApId | 1.3.6.1.4.1.2011.6.139.1.2.15 | Integer32 | read-write | Description. |
| INT hwWlanAcDtlsDefaultPskSwitch | 1.3.6.1.4.1.2011.6.139.1.2.16 | INTEGER | read-write | Description. |
| INT hwWlanWorkMode | 1.3.6.1.4.1.2011.6.139.1.2.17 | INTEGER | read-only | Description. |
| INT hwWlanIpv6Enable | 1.3.6.1.4.1.2011.6.139.1.2.18 | INTEGER | read-write | Description. |
| INT hwWlanInterAcDtlsEncrpyt | 1.3.6.1.4.1.2011.6.139.1.2.19 | INTEGER | read-write | Description. |
| OCT hwWlanInterAcDtlsPsk | 1.3.6.1.4.1.2011.6.139.1.2.20 | OCTET STRING | read-write | Description. |
| INT hwWlanStaIpv6Switch | 1.3.6.1.4.1.2011.6.139.1.2.21 | INTEGER | read-write | Whether to process IPv6 services of STAs. |
| hwWlanAcSourceInterface | 1.3.6.1.4.1.2011.6.139.1.3 | |||
| I32 hwWlanAcSourceInterfaceValue | 1.3.6.1.4.1.2011.6.139.1.3.1 | Integer32 | read-write | the value of wlan ac source interface. |
| INT hwWlanAcSourceInterfaceMethod | 1.3.6.1.4.1.2011.6.139.1.3.2 | INTEGER | read-write | operation method of wlan ac source interface.It can be set default(1): use default setting vlanif(2): use vlanif interface loopback(3): use loopback interface ipaddress(4):user ip address |
| IP hwWlanAcSourceIPv4Address | 1.3.6.1.4.1.2011.6.139.1.3.3 | IpAddress | read-write | Description. |
| hwWlanBatchQuery | 1.3.6.1.4.1.2011.6.139.1.4 | |||
| INT hwWlanBatchQueryType | 1.3.6.1.4.1.2011.6.139.1.4.1 | INTEGER | read-write | Data type of Batch query. For example, apProfName(1) can be used to get ap-profile-name list. The batch query support two modes, the number mode and the ID list mode, binding the node hwWlanBatchRequestNum and hwWlanBatchStartCount means use the number mode, binding the node hwWlanBatchRequestIdList, hwWlanBatchRequestIdSize hwWlanBatchRequestIdNum means use the ID list mode. |
| I32 hwWlanBatchRequestNum | 1.3.6.1.4.1.2011.6.139.1.4.2 | Integer32 | read-write | The request number of the batch query, it used in number mode. This node must be set in company with the node hwWlanBatchStartCount. For example, there are 6 ap-profiles(0 1 3 5 6 9) in the AC, Set hwWlanBatchQuery to apProfName(1), set hwWlanBatchRequestNum to 3, and set hwWlanBatchStartCount to 2, then get the node hwWlanBatchValueList and hwWlanBatchReturnNum, that means start from the 2nd ap-profile, get 3 ap-profile-names, the result in hwWlanBatchValueList are ap-profile(3 5 6 9). |
| I32 hwWlanBatchStartCount | 1.3.6.1.4.1.2011.6.139.1.4.3 | Integer32 | read-write | The start count of the batch query, it used in number mode. This node must be set in company with the node hwWlanBatchRequestNum. For example, there are 6 ap-profiles(0 1 3 5 6 9) in the AC, Set hwWlanBatchQuery to apProfName(1), set hwWlanBatchRequestNum to 3, and set hwWlanBatchStartCount to 2, then get the node hwWlanBatchValueList and hwWlanBatchReturnNum, that means start from the 2nd ap-profile, get 3 ap-profile-names, the result in hwWlanBatchValueList are ap-profile(3 5 6 9). |
| OCT hwWlanBatchRequestIdList | 1.3.6.1.4.1.2011.6.139.1.4.4 | OCTET STRING | read-write | The ID list of the data type, It used in ID list mode. This node must be set in company with the node hwWlanBatchRequestIdSize and hwWlanBatchRequestIdNum. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC, set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3), set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3) |
| I32 hwWlanBatchRequestIdSize | 1.3.6.1.4.1.2011.6.139.1.4.5 | Integer32 | read-write | The length of a batch query ID element, it used in ID list mode. This node must be set in company with the node hwWlanBatchRequestIdList and hwWlanBatchRequestIdNum. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC, set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3), set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3) |
| I32 hwWlanBatchRequestIdNum | 1.3.6.1.4.1.2011.6.139.1.4.6 | Integer32 | read-write | The number of batch query by id, it used in ID list mode. This node must be set in company with the node hwWlanBatchRequestIdList and hwWlanBatchRequestIdSize. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC, set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3), set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3) |
| OCT hwWlanBatchValueList | 1.3.6.1.4.1.2011.6.139.1.4.7 | OCTET STRING | read-only | The returned value list. If the value ended by a string, each value is divided by '?', otherwise , each value will have a fixed length. This node must be get in company with the node hwWlanBatchReturnNum. |
| I32 hwWlanBatchReturnNum | 1.3.6.1.4.1.2011.6.139.1.4.8 | Integer32 | read-only | The number of successful query. This node must be get in company with the node hwWlanBatchValueList. |
| I32 hwWlanBatchTotalNum | 1.3.6.1.4.1.2011.6.139.1.4.9 | Integer32 | read-only | Total number of current batch query. For example, There are 10 ap-Profiles in the AC, the value of this node will be 10. |
| hwWlanCapwapConfig | 1.3.6.1.4.1.2011.6.139.1.5 | |||
| I32 hwWlanCapwapKeepAliveInterval | 1.3.6.1.4.1.2011.6.139.1.5.1 | Integer32 | read-write | The interval of maintain freshness of the CAPWAP channel, in seconds. |
| I32 hwWlanCapwapKeepAliveTimes | 1.3.6.1.4.1.2011.6.139.1.5.2 | Integer32 | read-write | The times of maintain freshness of the CAPWAP channel before it timeout. |
| I32 hwWlanCapwapControlPriorityACToAP | 1.3.6.1.4.1.2011.6.139.1.5.3 | Integer32 | read-write | the ac's priority value of CAPWAP control packet,includ cos and tos, ranging between 0 and 7. |
| I32 hwWlanCapwapControlPriorityAPToAC | 1.3.6.1.4.1.2011.6.139.1.5.4 | Integer32 | read-write | the ap's priority value of CAPWAP control packet,includ tos, ranging between 0 and 7. |
| hwWlanAcProtect | 1.3.6.1.4.1.2011.6.139.1.6 | |||
| IP hwWlanAcProtectIpAddress | 1.3.6.1.4.1.2011.6.139.1.6.1 | IpAddress | read-write | IP address of the backup AC. |
| U32 hwWlanAcProtectPriority | 1.3.6.1.4.1.2011.6.139.1.6.2 | Unsigned32 | read-write | Dual-link hot backup priorities. |
| INT hwWlanAcProtectSwitch | 1.3.6.1.4.1.2011.6.139.1.6.3 | INTEGER | read-write | Dual-link hot backup switch. |
| INT hwWlanAcProtectRestoreSwitch | 1.3.6.1.4.1.2011.6.139.1.6.4 | INTEGER | read-write | Description. |
| I32 hwUndoWlanAcProtectIpAddress | 1.3.6.1.4.1.2011.6.139.1.6.5 | Integer32 | read-write | Description. |
| I32 hwUndoWlanAcProtectPriority | 1.3.6.1.4.1.2011.6.139.1.6.6 | Integer32 | read-write | Description. |
| OCT hwWlanAcProtectIpv6Address | 1.3.6.1.4.1.2011.6.139.1.6.7 | OCTET STRING | read-write | Description. |
| hwWlanConfigChannel | 1.3.6.1.4.1.2011.6.139.1.7 | |||
| OCT hwWlan24G20MconfigChannel | 1.3.6.1.4.1.2011.6.139.1.7.1 | OCTET STRING | read-only | Description. |
| OCT hwWlan24G40MPlusConfigChannel | 1.3.6.1.4.1.2011.6.139.1.7.2 | OCTET STRING | read-only | Description. |
| OCT hwWlan24G40MMinusConfigChannel | 1.3.6.1.4.1.2011.6.139.1.7.3 | OCTET STRING | read-only | Description. |
| OCT hwWlan5G20MConfigChannel | 1.3.6.1.4.1.2011.6.139.1.7.4 | OCTET STRING | read-only | Description. |
| OCT hwWlan5G40MPlusConfigChannel | 1.3.6.1.4.1.2011.6.139.1.7.5 | OCTET STRING | read-only | Description. |
| OCT hwWlan5G40MMinusConfigChannel | 1.3.6.1.4.1.2011.6.139.1.7.6 | OCTET STRING | read-only | Description. |
| I32 hwWlanConfigChannelApId | 1.3.6.1.4.1.2011.6.139.1.7.7 | Integer32 | read-write | Ap index, is used to identify AP uniquely.Query the configurable channel of the ap must contain apid otherwise query are global configurable channel. |
| OCT hwWlan24G80MConfigChannel | 1.3.6.1.4.1.2011.6.139.1.7.8 | OCTET STRING | read-only | Description. |
| OCT hwWlan5G80MConfigChannel | 1.3.6.1.4.1.2011.6.139.1.7.9 | OCTET STRING | read-only | Description. |
| hwWlanStaLoadbalance | 1.3.6.1.4.1.2011.6.139.1.8 | |||
| I32 hwWlanStaLoadbalanceEnable | 1.3.6.1.4.1.2011.6.139.1.8.1 | Integer32 | read-write | Description. |
| I32 hwWlanStaLoadbalanceMode | 1.3.6.1.4.1.2011.6.139.1.8.2 | Integer32 | read-write | Description. |
| I32 hwWlanStaLoadbalanceSessionGap | 1.3.6.1.4.1.2011.6.139.1.8.3 | Integer32 | read-write | Description. |
| I32 hwWlanStaLoadbalanceTrafficGap | 1.3.6.1.4.1.2011.6.139.1.8.4 | Integer32 | read-write | Description. |
| I32 hwWlanStaLoadbalanceAssociateThreshold | 1.3.6.1.4.1.2011.6.139.1.8.5 | Integer32 | read-write | Description. |
| hwWlanHsbConfig | 1.3.6.1.4.1.2011.6.139.1.9 | |||
| INT hwWlanHsbServiceType | 1.3.6.1.4.1.2011.6.139.1.9.1 | INTEGER | read-write | The hsb service type can be one of the three values: 1, 2, 3 (1: disable(1) 2: hsbGroup(2) 3: hsbService(3)). The default value of this node is 1. |
| U32 hwWlanHsbGroupId | 1.3.6.1.4.1.2011.6.139.1.9.2 | Unsigned32 | read-write | The id of the hsb group used. When hsb service type is disabled, the value of this node is 0xFFFFFFFF. |
| U32 hwWlanHsbTunnelId | 1.3.6.1.4.1.2011.6.139.1.9.3 | Unsigned32 | read-write | The id of the hsb tunnel used. When hsb service type is disabled, the value of this node is 0xFFFFFFFF. |
| hwWlanLocation | 1.3.6.1.4.1.2011.6.139.1.10 | |||
| IP hwWlanLocationServerIP | 1.3.6.1.4.1.2011.6.139.1.10.1 | IpAddress | read-write | Description. |
| I32 hwWlanLocationServerPort | 1.3.6.1.4.1.2011.6.139.1.10.2 | Integer32 | read-write | Description. |
| IP hwWlanLocationSourceIP | 1.3.6.1.4.1.2011.6.139.1.10.3 | IpAddress | read-write | Description. |
| I32 hwWlanLocationApReportToAC | 1.3.6.1.4.1.2011.6.139.1.10.4 | Integer32 | read-write | Description. |
| IP hwWlanLocationApReportToServerIp | 1.3.6.1.4.1.2011.6.139.1.10.5 | IpAddress | read-write | Description. |
| I32 hwWlanLocationApReportToUdpPort | 1.3.6.1.4.1.2011.6.139.1.10.6 | Integer32 | read-write | Description. |
| OCT hwWlanLocationApReportToIpv6Addr | 1.3.6.1.4.1.2011.6.139.1.10.7 | OCTET STRING | read-write | Description. |
| OCT hwWlanLocationAcReportToIpv6Addr | 1.3.6.1.4.1.2011.6.139.1.10.8 | OCTET STRING | read-write | Description. |
| hwWlanSpectrumAnalysis | 1.3.6.1.4.1.2011.6.139.1.11 | |||
| IP hwWlanSpectrumAnalysisServerIP | 1.3.6.1.4.1.2011.6.139.1.11.1 | IpAddress | read-write | Description. |
| I32 hwWlanSpectrumAnalysisServerPort | 1.3.6.1.4.1.2011.6.139.1.11.2 | Integer32 | read-write | Description. |
| I32 hwWlanNonWifiDeviceAgeTime | 1.3.6.1.4.1.2011.6.139.1.11.3 | Integer32 | read-write | Description. |
| IP hwWlanSpectrogramServerIP | 1.3.6.1.4.1.2011.6.139.1.11.4 | IpAddress | read-write | Description. |
| I32 hwWlanSpectrogramServerPort | 1.3.6.1.4.1.2011.6.139.1.11.5 | Integer32 | read-write | Description. |
| OCT hwWlanSpectrumAnalysisServerIPv6Addr | 1.3.6.1.4.1.2011.6.139.1.11.6 | OCTET STRING | read-write | Description. |
| OCT hwWlanSpectrogramServerIPv6Addr | 1.3.6.1.4.1.2011.6.139.1.11.7 | OCTET STRING | read-write | Description. |
| hwWlanSysManagementObjects | 1.3.6.1.4.1.2011.6.139.1.12 | |||
| hwWlanLBSConfig | 1.3.6.1.4.1.2011.6.139.1.12.1 | |||
| I32 hwWlanLBSAeServerPort | 1.3.6.1.4.1.2011.6.139.1.12.1.1 | Integer32 | read-write | Description. |
| INT hwWlanLBSAeApReportMode | 1.3.6.1.4.1.2011.6.139.1.12.1.2 | INTEGER | read-write | Description. |
| I32 hwWlanLBSAeApReportPort | 1.3.6.1.4.1.2011.6.139.1.12.1.3 | Integer32 | read-write | Description. |
| IP hwWlanLBSEkServerIp | 1.3.6.1.4.1.2011.6.139.1.12.1.4 | IpAddress | read-write | Description. |
| I32 hwWlanLBSEkServerPort | 1.3.6.1.4.1.2011.6.139.1.12.1.5 | Integer32 | read-write | Description. |
| INT hwWlanLBSEkApReportMode | 1.3.6.1.4.1.2011.6.139.1.12.1.6 | INTEGER | read-write | Description. |
| IP hwWlanLBSEkApReportIp | 1.3.6.1.4.1.2011.6.139.1.12.1.7 | IpAddress | read-write | Description. |
| I32 hwWlanLBSEkApReportPort | 1.3.6.1.4.1.2011.6.139.1.12.1.8 | Integer32 | read-write | Description. |
| IP hwWlanLBSSourceIp | 1.3.6.1.4.1.2011.6.139.1.12.1.9 | IpAddress | read-write | Description. |
| I32 hwWlanLBSAeCompoundTime | 1.3.6.1.4.1.2011.6.139.1.12.1.10 | Integer32 | read-write | Compound Time of AeroScout Tag Message |
| OCT hwWlanLBSEkServerIpv6Addr | 1.3.6.1.4.1.2011.6.139.1.12.1.11 | OCTET STRING | read-write | Description. |
| OCT hwWlanLBSEkApReportIpv6Addr | 1.3.6.1.4.1.2011.6.139.1.12.1.12 | OCTET STRING | read-write | Description. |
| OCT hwWlanLBSSourceIpv6Addr | 1.3.6.1.4.1.2011.6.139.1.12.1.13 | OCTET STRING | read-write | Description. |
| hwInterAcManagement | 1.3.6.1.4.1.2011.6.139.1.13 | |||
| INT hwMasterControllerSwitch | 1.3.6.1.4.1.2011.6.139.1.13.1 | INTEGER | read-write | Description. |
| INT hwConnectMasterControllerSwitch | 1.3.6.1.4.1.2011.6.139.1.13.2 | INTEGER | read-write | Description. |
| IP hwConnectMasterControllerIPv4Address | 1.3.6.1.4.1.2011.6.139.1.13.3 | IpAddress | read-write | Description. |
| OCT hwConnectMasterControllerIPv6Address | 1.3.6.1.4.1.2011.6.139.1.13.4 | OCTET STRING | read-write | Description. |
| hwWlanSysManagementConformance | 1.3.6.1.4.1.2011.6.139.1.14 | |||
| hwWlanSysManagementCompliances | 1.3.6.1.4.1.2011.6.139.1.14.1 | |||
| hwWlanSysManagementCompliance | 1.3.6.1.4.1.2011.6.139.1.14.1.1 | Description. | ||
| hwWlanSysManagementObjectGroups | 1.3.6.1.4.1.2011.6.139.1.14.2 | |||
| hwWlanTrapRestrainGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.1 | Description. | ||
| hwWlanSysParaGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.2 | Description. | ||
| hwWlanAcSourceInterfaceGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.3 | Description. | ||
| hwWlanBatchQueryGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.4 | Description. | ||
| hwWlanCapwapConfigGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.5 | Description. | ||
| hwWlanAcProtectGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.6 | Description. | ||
| hwWlanConfigChannelGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.7 | Description. | ||
| hwWlanStaLoadbalanceGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.8 | Description. | ||
| hwWlanHsbConfigGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.9 | Description. | ||
| hwWlanLocationGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.10 | Description. | ||
| hwWlanSpectrumAnalysisGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.11 | Description. | ||
| hwWlanLBSConfigGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.12 | Description. | ||
| hwInterAcManagementGroup | 1.3.6.1.4.1.2011.6.139.1.14.2.13 | Description. |
RFC description
Huawei WLAN system MIB for configuring and managing wireless LAN access controllers in global view.
Start monitoring Huawei wireless LAN controller (AC, system-wide config/trap suppression) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.