All MIBs › HUAWEI-WLAN-SYS-MIB › hwWlanApTrapRestrainApIndexMask
hwWlanApTrapRestrainApIndexMask
Module: HUAWEI-WLAN-SYS-MIB
OID (symbolic): HUAWEI-WLAN-SYS-MIB::hwWlanApTrapRestrainApIndexMask
OID (numeric): 1.3.6.1.4.1.2011.6.139.1.1.4.1
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Wlan trap restrain by ap. Every bit is used to describe the ap's trap will be restrained or not. 0 means not restrain, and 1 means restrain. Each Byte describes 8 aps are restrained or not. The value of this node is hexadecimal integer block. For example, the first Byte describes ap 0~7 is restrained or not, and the second Byte describes ap 8~15 is restrained or not. Such as, if only ap 0,4,5,6,7,9 is restrain, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2.
What is hwWlanApTrapRestrainApIndexMask?
A bitmap where each bit represents one AP and a 1 means that AP's traps are restrained (0 means not restrained), packed 8 APs per byte, using the same encoding scheme as hwWlanApRegionTrapRestrainRegionIndexMask. Admins use it to silence traps from individual access points, e.g. ones being reconfigured or swapped.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.139.1.1.4.1 snmpwalk -v2c -c public <target> HUAWEI-WLAN-SYS-MIB::hwWlanApTrapRestrainApIndexMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.139.1.1.4.1.1 snmpget -v2c -c public <target> HUAWEI-WLAN-SYS-MIB::hwWlanApTrapRestrainApIndexMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.139.1.1.4.1.1 s <value>
Start monitoring Huawei wireless LAN controller (AC, system-wide config/trap suppression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-WLAN-SYS-MIB::hwWlanApTrapRestrainApIndexMask OID value, configure state conditions and alerts, and monitor any Huawei wireless LAN controller (AC, system-wide config/trap suppression) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.6.139 | hwWlan | HUAWEI-WLAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.139.1 | hwWlanSysManagement | HUAWEI-WLAN-SYS-MIB |
| 1.3.6.1.4.1.2011.6.139.1.1 | hwWlanTrapRestrain | HUAWEI-WLAN-SYS-MIB |
| 1.3.6.1.4.1.2011.6.139.1.1.4 | hwWlanApTrapRestrain | HUAWEI-WLAN-SYS-MIB |
| 1.3.6.1.4.1.2011.6.139.1.1.4.1 | hwWlanApTrapRestrainApIndexMask | HUAWEI-WLAN-SYS-MIB |