HUAWEI-LQOS-MIB

All MIBs › HUAWEI-LQOS-MIB

Organization: HUAWEI LANSWITCH

Last Updated: 2002-11-19

Category: Domain: DSL, Quality of Service, Vendor: Huawei

Description: Huawei LQOS (Line-level QoS) MIB for managing subscriber line QoS policies, shaping rates, and priority scheduling on DSL and PON access lines.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-LQOS-MIB?

HUAWEI-LQOS-MIB is a Huawei MIB for line-level Quality of Service on subscriber access lines, applicable to DSL and PON broadband access equipment, and is closely tied to Huawei's ACL feature set. It exposes configuration data for per-subscriber-line QoS policy assignment, traffic shaping rates, and priority scheduling. Its monitoring value is mainly software/service-configuration status: confirming a subscriber line has the correct QoS policy and shaping rate applied, which is directly tied to SLA compliance rather than to physical hardware health. Because the extracted module description is minimal ('module node for qos and acl'), this MIB may function partly as a registration/organizational node tying together separate QoS and ACL branches rather than exposing extensive runtime data itself. It is deployed on Huawei broadband access nodes such as DSLAMs and PON OLTs that provision differentiated QoS per subscriber. Engineers can download the HUAWEI-LQOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-LQOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei DSL access multiplexers (DSLAM)
Huawei PON/OLT access equipment

Monitoring Examples

No sample object names were provided and the module description is minimal, so runtime object names cannot be confirmed. Based on the short description, an administrator would be expected to check per-subscriber-line QoS policy assignment and shaping-rate configuration to verify a line is receiving its contracted bandwidth priority, and to detect a policy that failed to apply after a provisioning change.

What Can Be Monitored

per-subscriber QoS policy assignment
traffic shaping rate configuration
priority scheduling configuration
ACL policy association

Imported Objects

From HUAWEI-MIB

huaweiMgmt

OBJECT-IDENTITY

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT hwLineRateIfIndex	1.3.6.1.4.1.2011.5.2.9.1.1	INTEGER	read-only
ROW hwLineRateRowStatus	1.3.6.1.4.1.2011.5.2.9.1.3	RowStatus	read-create
hwLineRateTable	1.3.6.1.4.1.2011.5.2.9		not-accessible
hwLineRateTableEntry	1.3.6.1.4.1.2011.5.2.9.1		not-accessible
INT hwLineRateValue	1.3.6.1.4.1.2011.5.2.9.1.2	INTEGER	read-create
hwLswQosAclMib	1.3.6.1.4.1.2011.5.2			Module node for qos and acl.
INT hwMirrorAclIndex	1.3.6.1.4.1.2011.5.2.7.1.1	INTEGER	read-only
INT hwMirrorDirection	1.3.6.1.4.1.2011.5.2.7.1.3	INTEGER	read-only
INT hwMirrorIfIndex	1.3.6.1.4.1.2011.5.2.7.1.2	INTEGER	read-only
INT hwMirrorIpAclNum	1.3.6.1.4.1.2011.5.2.7.1.6	INTEGER	read-create
INT hwMirrorIpAclSubitem	1.3.6.1.4.1.2011.5.2.7.1.7	INTEGER	read-create
INT hwMirrorLinkAclNum	1.3.6.1.4.1.2011.5.2.7.1.8	INTEGER	read-create
INT hwMirrorLinkAclSubitem	1.3.6.1.4.1.2011.5.2.7.1.9	INTEGER	read-create
ROW hwMirrorRowStatus	1.3.6.1.4.1.2011.5.2.7.1.12	RowStatus	read-create
T/F hwMirrorRuntime	1.3.6.1.4.1.2011.5.2.7.1.11	TruthValue	read-only
hwMirrorTable	1.3.6.1.4.1.2011.5.2.7		not-accessible
hwMirrorTableEntry	1.3.6.1.4.1.2011.5.2.7.1		not-accessible
INT hwMirrorToIfIndex	1.3.6.1.4.1.2011.5.2.7.1.10	INTEGER	read-create
INT hwMirrorUserAclNum	1.3.6.1.4.1.2011.5.2.7.1.4	INTEGER	read-create
INT hwMirrorUserAclSubitem	1.3.6.1.4.1.2011.5.2.7.1.5	INTEGER	read-create
INT hwPriorityAclIndex	1.3.6.1.4.1.2011.5.2.4.1.1	INTEGER	read-only
T/F hwPriorityCosFromIpPre	1.3.6.1.4.1.2011.5.2.4.1.14	TruthValue	read-create
INT hwPriorityCosValue	1.3.6.1.4.1.2011.5.2.4.1.13	INTEGER	read-create	802.1p priority value background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) from-ipprec Specify 802.1p priority same as IP precedence network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6)
INT hwPriorityDirection	1.3.6.1.4.1.2011.5.2.4.1.3	INTEGER	read-only
INT hwPriorityDscp	1.3.6.1.4.1.2011.5.2.4.1.10	INTEGER	read-create	af1 Specify Assured Forwarding 1 service(10) af2 Specify Assured Forwarding 2 service(18) af3 Specify Assured Forwarding 3 service(26) af4 Specify Assured Forwarding 4 service(34) be Specify Best Effort service(0) cs1 Specify Class Seletor 1 service(8) cs2 Specify Class Seletor 2 service(16) cs3 Specify Class Seletor 3 service(24) cs4 Specify Class Seletor 4 service(32) cs5 Specify Class Seletor 5 service(40) cs6 Specify Class Seletor 6 service(48) cs7 Specify Class Seletor 7 service(56) ef Specify Expedited Forwarding service(46)
INT hwPriorityIfIndex	1.3.6.1.4.1.2011.5.2.4.1.2	INTEGER	read-only
INT hwPriorityIpAclNum	1.3.6.1.4.1.2011.5.2.4.1.6	INTEGER	read-create
INT hwPriorityIpAclSubitem	1.3.6.1.4.1.2011.5.2.4.1.7	INTEGER	read-create
T/F hwPriorityIpPreFromCos	1.3.6.1.4.1.2011.5.2.4.1.12	TruthValue	read-create
INT hwPriorityIpPreValue	1.3.6.1.4.1.2011.5.2.4.1.11	INTEGER	read-create	critical Specify critical precedence(5) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) from-cos Specify IP precedence same as 802.1p priority immediate Specify immediate precedence(2) internet Specify internetwork control precedence(6) network Specify network control precedence(7) priority Specify priority precedence(1) routine Specify routine precedence(0)
INT hwPriorityLinkAclNum	1.3.6.1.4.1.2011.5.2.4.1.8	INTEGER	read-create
INT hwPriorityLinkAclSubitem	1.3.6.1.4.1.2011.5.2.4.1.9	INTEGER	read-create
INT hwPriorityLocalPre	1.3.6.1.4.1.2011.5.2.4.1.15	INTEGER	read-create
ROW hwPriorityRowStatus	1.3.6.1.4.1.2011.5.2.4.1.17	RowStatus	read-create
T/F hwPriorityRuntime	1.3.6.1.4.1.2011.5.2.4.1.16	TruthValue	read-only
hwPriorityTable	1.3.6.1.4.1.2011.5.2.4		not-accessible
hwPriorityTableEntry	1.3.6.1.4.1.2011.5.2.4.1		not-accessible
INT hwPriorityUserAclNum	1.3.6.1.4.1.2011.5.2.4.1.4	INTEGER	read-create
INT hwPriorityUserAclSubitem	1.3.6.1.4.1.2011.5.2.4.1.5	INTEGER	read-create
INT hwQueueIfIndex	1.3.6.1.4.1.2011.5.2.2.1.1	INTEGER	read-only
INT hwQueueMaxDelay	1.3.6.1.4.1.2011.5.2.2.1.19	INTEGER	read-only
INT hwQueueScheduleMode	1.3.6.1.4.1.2011.5.2.2.1.2	INTEGER	read-write
hwQueueTable	1.3.6.1.4.1.2011.5.2.2		not-accessible
hwQueueTableEntry	1.3.6.1.4.1.2011.5.2.2.1		not-accessible
INT hwQueueWeight1	1.3.6.1.4.1.2011.5.2.2.1.3	INTEGER	read-write
INT hwQueueWeight2	1.3.6.1.4.1.2011.5.2.2.1.4	INTEGER	read-write
INT hwQueueWeight3	1.3.6.1.4.1.2011.5.2.2.1.5	INTEGER	read-write
INT hwQueueWeight4	1.3.6.1.4.1.2011.5.2.2.1.6	INTEGER	read-write
INT hwQueueWeight5	1.3.6.1.4.1.2011.5.2.2.1.7	INTEGER	read-write
INT hwQueueWeight6	1.3.6.1.4.1.2011.5.2.2.1.8	INTEGER	read-write
INT hwQueueWeight7	1.3.6.1.4.1.2011.5.2.2.1.9	INTEGER	read-write
INT hwQueueWeight8	1.3.6.1.4.1.2011.5.2.2.1.10	INTEGER	read-write
INT hwRateLimitAclIndex	1.3.6.1.4.1.2011.5.2.3.1.1	INTEGER	read-only
INT hwRateLimitDirection	1.3.6.1.4.1.2011.5.2.3.1.3	INTEGER	read-only
T/F hwRateLimitExceedDrop	1.3.6.1.4.1.2011.5.2.3.1.11	TruthValue	read-create
INT hwRateLimitExceedDscp	1.3.6.1.4.1.2011.5.2.3.1.12	INTEGER	read-create
INT hwRateLimitIfIndex	1.3.6.1.4.1.2011.5.2.3.1.2	INTEGER	read-only
INT hwRateLimitIpAclNum	1.3.6.1.4.1.2011.5.2.3.1.6	INTEGER	read-create
INT hwRateLimitIpAclSubitem	1.3.6.1.4.1.2011.5.2.3.1.7	INTEGER	read-create
INT hwRateLimitLinkAclNum	1.3.6.1.4.1.2011.5.2.3.1.8	INTEGER	read-create
INT hwRateLimitLinkAclSubitem	1.3.6.1.4.1.2011.5.2.3.1.9	INTEGER	read-create
ROW hwRateLimitRowStatus	1.3.6.1.4.1.2011.5.2.3.1.14	RowStatus	read-create
T/F hwRateLimitRuntime	1.3.6.1.4.1.2011.5.2.3.1.13	TruthValue	read-only
hwRateLimitTable	1.3.6.1.4.1.2011.5.2.3		not-accessible
hwRateLimitTableEntry	1.3.6.1.4.1.2011.5.2.3.1		not-accessible
INT hwRateLimitTargetRate	1.3.6.1.4.1.2011.5.2.3.1.10	INTEGER	read-create
INT hwRateLimitUserAclNum	1.3.6.1.4.1.2011.5.2.3.1.4	INTEGER	read-create
INT hwRateLimitUserAclSubitem	1.3.6.1.4.1.2011.5.2.3.1.5	INTEGER	read-create
INT hwRedirectAclIndex	1.3.6.1.4.1.2011.5.2.5.1.1	INTEGER	read-only
INT hwRedirectDirection	1.3.6.1.4.1.2011.5.2.5.1.3	INTEGER	read-only
INT hwRedirectIfIndex	1.3.6.1.4.1.2011.5.2.5.1.2	INTEGER	read-only
INT hwRedirectIpAclNum	1.3.6.1.4.1.2011.5.2.5.1.6	INTEGER	read-create
INT hwRedirectIpAclSubitem	1.3.6.1.4.1.2011.5.2.5.1.7	INTEGER	read-create
INT hwRedirectLinkAclNum	1.3.6.1.4.1.2011.5.2.5.1.8	INTEGER	read-create
INT hwRedirectLinkAclSubitem	1.3.6.1.4.1.2011.5.2.5.1.9	INTEGER	read-create
ROW hwRedirectRowStatus	1.3.6.1.4.1.2011.5.2.5.1.13	RowStatus	read-create
T/F hwRedirectRuntime	1.3.6.1.4.1.2011.5.2.5.1.12	TruthValue	read-only
hwRedirectTable	1.3.6.1.4.1.2011.5.2.5		not-accessible
hwRedirectTableEntry	1.3.6.1.4.1.2011.5.2.5.1		not-accessible
T/F hwRedirectToCpu	1.3.6.1.4.1.2011.5.2.5.1.10	TruthValue	read-create
INT hwRedirectToIfIndex	1.3.6.1.4.1.2011.5.2.5.1.11	INTEGER	read-create
INT hwRedirectUserAclNum	1.3.6.1.4.1.2011.5.2.5.1.4	INTEGER	read-create
INT hwRedirectUserAclSubitem	1.3.6.1.4.1.2011.5.2.5.1.5	INTEGER	read-create
INT hwStatisticAclIndex	1.3.6.1.4.1.2011.5.2.6.1.1	INTEGER	read-only
INT hwStatisticCountClear	1.3.6.1.4.1.2011.5.2.6.1.12	INTEGER	read-write
INT hwStatisticDirection	1.3.6.1.4.1.2011.5.2.6.1.3	INTEGER	read-only
INT hwStatisticIfIndex	1.3.6.1.4.1.2011.5.2.6.1.2	INTEGER	read-only
INT hwStatisticIpAclNum	1.3.6.1.4.1.2011.5.2.6.1.6	INTEGER	read-create
INT hwStatisticIpAclSubitem	1.3.6.1.4.1.2011.5.2.6.1.7	INTEGER	read-create
INT hwStatisticLinkAclNum	1.3.6.1.4.1.2011.5.2.6.1.8	INTEGER	read-create
INT hwStatisticLinkAclSubitem	1.3.6.1.4.1.2011.5.2.6.1.9	INTEGER	read-create
C64 hwStatisticPacketCount	1.3.6.1.4.1.2011.5.2.6.1.11	Counter64	read-only
ROW hwStatisticRowStatus	1.3.6.1.4.1.2011.5.2.6.1.13	RowStatus	read-create
T/F hwStatisticRuntime	1.3.6.1.4.1.2011.5.2.6.1.10	TruthValue	read-only
hwStatisticTable	1.3.6.1.4.1.2011.5.2.6		not-accessible
hwStatisticTableEntry	1.3.6.1.4.1.2011.5.2.6.1		not-accessible
INT hwStatisticUserAclNum	1.3.6.1.4.1.2011.5.2.6.1.4	INTEGER	read-create
INT hwStatisticUserAclSubitem	1.3.6.1.4.1.2011.5.2.6.1.5	INTEGER	read-create
INT hwWFQMaxWeight1	1.3.6.1.4.1.2011.5.2.2.1.11	INTEGER	read-write
INT hwWFQMaxWeight2	1.3.6.1.4.1.2011.5.2.2.1.12	INTEGER	read-write
INT hwWFQMaxWeight3	1.3.6.1.4.1.2011.5.2.2.1.13	INTEGER	read-write
INT hwWFQMaxWeight4	1.3.6.1.4.1.2011.5.2.2.1.14	INTEGER	read-write
INT hwWFQMaxWeight5	1.3.6.1.4.1.2011.5.2.2.1.15	INTEGER	read-write
INT hwWFQMaxWeight6	1.3.6.1.4.1.2011.5.2.2.1.16	INTEGER	read-write
INT hwWFQMaxWeight7	1.3.6.1.4.1.2011.5.2.2.1.17	INTEGER	read-write
INT hwWFQMaxWeight8	1.3.6.1.4.1.2011.5.2.2.1.18	INTEGER	read-write

RFC description

Manages QoS and ACL configuration including queue scheduling, priority weighting, and traffic classification on Huawei switches.

Start monitoring Huawei DSL access multiplexer (DSLAM) / PON OLT access equipment (line QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-LQOS-MIB

What Is HUAWEI-LQOS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description