HUAWEI-WLAN-AP-RADIO-MIB

All MIBs › HUAWEI-WLAN-AP-RADIO-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2020-06-16

Category: Technology: Wireless, Vendor: Huawei, Wireless and WLAN

Description: Huawei WLAN MIB for managing access point radio interface parameters including channel, power, and 802.11 PHY settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-WLAN-AP-RADIO-MIB?

HUAWEI-WLAN-AP-RADIO-MIB is a Huawei enterprise MIB for managing wireless access point radio interfaces, covering per-radio parameters such as channel selection, transmit power, and 802.11 PHY settings, plus associated fault conditions like channel changes, RF signal-environment deterioration, and radio-down events. Its data spans configuration (channel/power settings) and fault/trap-oriented status (radio down, interference rate, channel-change notifications), making it directly relevant to monitoring the operational health of individual AP radios. Key hardware/software status signals include whether a radio is up or down, its current interference/noise level, and unplanned channel changes, all of which are early indicators of RF environment problems or a failing radio module. It is part of Huawei's broader WLAN AC/AP management MIB family and depends on other Huawei WLAN MIBs for AP identity and controller association. It is deployed on Huawei WLAN access points managed by a Huawei wireless controller (AC) in enterprise and campus Wi-Fi deployments. Engineers can download the HUAWEI-WLAN-AP-RADIO-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-WLAN-AP-RADIO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei WLAN access point

Monitoring Examples

No sample runtime objects were provided for this module beyond the described trap names, so a specific table walk cannot be given without inventing OIDs; based on the module description, an operator would watch for hwRadioDownTrap and hwRadioSignalEnvDeteriorationTrap notifications and correlate them with hwRadioChannelChangedTrap events to distinguish a hardware radio failure from an RF interference-driven auto-channel change.

What Can Be Monitored

radio channel setting
transmit power level
radio up/down status
RF interference rate
channel-change events

Imported Objects

From HUAWEI-WLAN-AP-MIB

hwWlanApId	OBJECT-TYPE
hwWlanApMac	OBJECT-TYPE
hwWlanApName	OBJECT-TYPE

From HUAWEI-WLAN-MIB

hwWlan

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
RowStatus

How to Use in IPNetwork Monitor

Example using hwWlanRadioRcvFrames OID:

Select a Huawei WLAN access point radio, managed via AC (channel/power/interference) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwWlanRadioRcvFrames into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object indicates the number of user packets received at the wireless side. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF hwApAccessChannelUtilExceedThresholdRecovTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.25			The channel usage falls below the clear alarm threshold.
NTF hwApAccessChannelUtilExceedThresholdTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.24			The channel usage exceeds the alarm threshold.
NTF hwApAccessUserNumExceedThresholdRecovTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.21			The number of users associated with the AP falls below the clear alarm threshold.
NTF hwApAccessUserNumExceedThresholdTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.20			The number of users associated with the AP exceeds the alarm threshold.
NTF hwAPCoInterfClearTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.6			The co-channel interference between APs was removed.
NTF hwAPCoInterfDetectedTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.5			The co-channel interference between APs was detected.
NTF hwApMonitorModeChangedTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.4			The wireless monitoring mode of an AP was changed.
NTF hwApRoamChannelUtilExceedThresholdRecovTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.27			The channel usage by the roaming STAs falls below the clear alarm threshold.
NTF hwApRoamChannelUtilExceedThresholdTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.26			The channel usage by the roaming STAs exceeds the alarm threshold.
NTF hwApRoamUserNumExceedThresholdRecovTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.23			The number of roaming users The number of roaming users connected to the AP falls below the clear alarm threshold.
NTF hwApRoamUserNumExceedThresholdTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.22			The number of roaming users connected to the AP exceeds the alarm threshold.
NTF hwNeiborInterfClearTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.8			The adjacent-channel interference between APs was removed.
NTF hwNerborInterfDetectedTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.7			The adjacent-channel interference between APs was detected.
NTF hwOtherDeviceInterfClearTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.12			Interference on other devices was removed.
NTF hwOtherDeviceInterfDetectedTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.11			Interference on other devices was detected.
NTF hwRadioAntennaGainIsUnlawfulTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.18			The antenna gain of the radio does not conform to local law.
OCT hwRadioChannelChangedHasRadarChannel	1.3.6.1.4.1.2011.6.139.16.1.1.2.40	OCTET STRING	read-only	Description.
NTF hwRadioChannelChangedTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.1			This alarm is generated when a channel changes.
NTF hwRadioDownRecovTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.14			The radio link Down alarm was cleared.
NTF hwRadioDownRecovTrapFat	1.3.6.1.4.1.2011.6.139.16.1.1.1.29			Description.
NTF hwRadioDownTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.13			A wireless link is Down.
NTF hwRadioDownTrapFat	1.3.6.1.4.1.2011.6.139.16.1.1.1.28			Description.
NTF hwRadioNotSupportChannelTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.16			A channel is not supported.
NTF hwRadioNotSupportPowerLevelTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.17			Power is not supported.
NTF hwRadioPowerChangedTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.19			The radio power is changed.
NTF hwRadioReachMaxUserPhySpecClearTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.31			This object indicates that the number of access STAs falls below the maximum value supported by a radio.
NTF hwRadioReachMaxUserPhySpecTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.30			This object indicates that the number of access STAs reaches the maximum value supported by a radio.
NTF hwRadioSignalEnvDeteriorationTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.2			This alarm is generated when radio environment deteriorates.
NTF hwRadioSignalEnvResumeTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.3			This alarm is generated when radio environment is recovered.
NTF hwStaInterfClearTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.10			Interference on STA was cleared.
NTF hwStaInterfDetectedTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.9			Interference on STA was detected.
NTF hwWIDSDetectRogueTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1.15			A suspicious device is detected.
I32 hwWlanApChannel	1.3.6.1.4.1.2011.6.139.16.1.1.2.11	Integer32	read-only	Description.
MAC hwWlanApInterfBssid	1.3.6.1.4.1.2011.6.139.16.1.1.2.12	MacAddress	read-only	Description.
I32 hwWlanApMonitorMode	1.3.6.1.4.1.2011.6.139.16.1.1.2.9	Integer32	read-only	Description.
OCT hwWlanApMonitorModeDesc	1.3.6.1.4.1.2011.6.139.16.1.1.2.36	OCTET STRING	read-only	Description.
I32 hwWlanApPreMonitorMode	1.3.6.1.4.1.2011.6.139.16.1.1.2.10	Integer32	read-only	Description.
I32 hwWlanApPreMonitorModeDesc	1.3.6.1.4.1.2011.6.139.16.1.1.2.37	Integer32	read-only	Description.
I32 hwWlanApRadioNotifyPara	1.3.6.1.4.1.2011.6.139.16.1.1.2.28	Integer32	read-only	Description.
I32 hwWlanAuthAPId	1.3.6.1.4.1.2011.6.139.16.1.4.1.3	Integer32	read-only	This object indicates the ID of the authorized AP that is closest to the rogue AP.
I32 hwWlanInterfApChannel	1.3.6.1.4.1.2011.6.139.16.1.1.2.15	Integer32	read-only	Description.
I32 hwWlanInterfRSSI	1.3.6.1.4.1.2011.6.139.16.1.1.2.16	Integer32	read-only	Description.
OCT hwWlanInterfStaMac	1.3.6.1.4.1.2011.6.139.16.1.1.2.13	OCTET STRING	read-only	Description.
hwWlanRadio	1.3.6.1.4.1.2011.6.139.16			V1.37, modify the node of hwRadioChannelChangedTrap, hwRadioSignalEnvDeteriorationTrap and hwRadioDownTrap, rename the node of hwWlanRadioInterfereRate hwWlanRadioInterferenceRate.
I32 hwWlanRadioActualAntennaGain	1.3.6.1.4.1.2011.6.139.16.1.1.2.4	Integer32	read-only	Description.
U32 hwWlanRadioActualChannel	1.3.6.1.4.1.2011.6.139.16.1.1.2.1	Unsigned32	read-only	Description.
INT hwWlanRadioActualChannelBandwidth	1.3.6.1.4.1.2011.6.139.16.1.1.2.2	INTEGER	read-only	Description.
U32 hwWlanRadioActualEIRP	1.3.6.1.4.1.2011.6.139.16.1.2.1.45	Unsigned32	read-only	This object indicates the actual power of a radio, invalid value is 255.
I32 hwWlanRadioActualPowerLevel	1.3.6.1.4.1.2011.6.139.16.1.1.2.3	Integer32	read-only	Description.
I32 hwWlanRadioAntennaGain	1.3.6.1.4.1.2011.6.139.16.1.2.1.15	Integer32	read-only	This object indicates the antenna gain.
OCT hwWlanRadioApGroup	1.3.6.1.4.1.2011.6.139.16.1.2.1.55	OCTET STRING	read-only	This object indicates the group name
INT hwWlanRadioAutoBandwidthSelectSwitch	1.3.6.1.4.1.2011.6.139.16.1.2.1.57	INTEGER	read-only	This object indicates the DBS switch status.
U32 hwWlanRadioBadChannel	1.3.6.1.4.1.2011.6.139.16.1.1.2.43	Unsigned32	read-only	Description.
I32 hwWlanRadioBandwidth	1.3.6.1.4.1.2011.6.139.16.1.2.1.19	Integer32	read-only	This object indicates the interface bandwidth.
INT hwWlanRadioChannelChangedReason	1.3.6.1.4.1.2011.6.139.16.1.1.2.6	INTEGER	read-only	Description.
OCT hwWlanRadioChannelChangedReasonStr	1.3.6.1.4.1.2011.6.139.16.1.1.2.7	OCTET STRING	read-only	Description.
U32 hwWlanRadioChannelFreeRate	1.3.6.1.4.1.2011.6.139.16.1.2.1.26	Unsigned32	read-only	This object indicates the idle period.
INT hwWlanRadioChannelSelectMode	1.3.6.1.4.1.2011.6.139.16.1.2.1.53	INTEGER	read-only	This object indicates the channel selection Mode
U32 hwWlanRadioChInterferenceRate	1.3.6.1.4.1.2011.6.139.16.1.2.1.29	Unsigned32	read-only	This object indicates the interference rate.
U32 hwWlanRadioChUtilizationRate	1.3.6.1.4.1.2011.6.139.16.1.2.1.25	Unsigned32	read-only	This object indicates the channel usage on the radio.
hwWlanRadioCompliance	1.3.6.1.4.1.2011.6.139.16.3.1.1			Description.
hwWlanRadioCompliances	1.3.6.1.4.1.2011.6.139.16.3.1
U32 hwWlanRadioConflictRate	1.3.6.1.4.1.2011.6.139.16.1.1.2.8	Unsigned32	read-only	Description.
hwWlanRadioConformance	1.3.6.1.4.1.2011.6.139.16.3
OCT hwWlanRadioDecsption	1.3.6.1.4.1.2011.6.139.16.1.2.1.16	OCTET STRING	read-only	This object indicates the interface description.
I32 hwWlanRadioDownCause	1.3.6.1.4.1.2011.6.139.16.1.1.2.14	Integer32	read-only	Description.
OCT hwWlanRadioDownCauseStr	1.3.6.1.4.1.2011.6.139.16.1.1.2.25	OCTET STRING	read-only	Description.
OCT hwWlanRadioEnvDetReason	1.3.6.1.4.1.2011.6.139.16.1.1.2.39	OCTET STRING	read-only	Radio environment deterioration reason
INT hwWlanRadioFlexibleRadioStatus	1.3.6.1.4.1.2011.6.139.16.1.2.1.56	INTEGER	read-only	This object indicates the flexible-radio status
INT hwWlanRadioFlexibleRadioSwitch	1.3.6.1.4.1.2011.6.139.16.1.2.1.59	INTEGER	read-only	This object indicates the status of the flexible radio switch. The default value is 2.
INT hwWlanRadioFreqType	1.3.6.1.4.1.2011.6.139.16.1.2.1.5	INTEGER	read-only	This object indicates the radio frequency band.
U32 hwWlanRadioID	1.3.6.1.4.1.2011.6.139.16.1.2.1.2	Unsigned32	accessible-for-notify	This object indicates the radio ID.
U32 hwWlanRadioInfoApId	1.3.6.1.4.1.2011.6.139.16.1.2.1.48	Unsigned32	read-only	AP ID.
MAC hwWlanRadioInfoApMac	1.3.6.1.4.1.2011.6.139.16.1.2.1.1	MacAddress	accessible-for-notify	This object indicates the MAC address of the AP.
OCT hwWlanRadioInfoApName	1.3.6.1.4.1.2011.6.139.16.1.2.1.3	OCTET STRING	read-only	This object indicates the AP name.
hwWlanRadioInfoEntry	1.3.6.1.4.1.2011.6.139.16.1.2.1		not-accessible	The indexes of this table are hwWlanRadioInfoApMac and hwWlanRadioID.
hwWlanRadioInfoGroup	1.3.6.1.4.1.2011.6.139.16.3.2.3			Description.
hwWlanRadioInfoTable	1.3.6.1.4.1.2011.6.139.16.1.2		not-accessible	This table is used to query RF information, including channel, power, number of sent and received packets, and number of users.
I32 hwWlanRadioInfoUpDownTimes	1.3.6.1.4.1.2011.6.139.16.1.2.1.22	Integer32	read-only	This object indicates how many times the interface goes online and offline.
U32 hwWlanRadioInterferenceRate	1.3.6.1.4.1.2011.6.139.16.1.1.2.44	Unsigned32	read-only	Interfere Rate.
I32 hwWlanRadioLastChange	1.3.6.1.4.1.2011.6.139.16.1.2.1.21	Integer32	read-only	This object indicates how long the interface has stayed in the current state.
I32 hwWlanRadioLegitimateAntennaGain	1.3.6.1.4.1.2011.6.139.16.1.1.2.5	Integer32	read-only	Description.
I32 hwWlanRadioLegitimateEirp	1.3.6.1.4.1.2011.6.139.16.1.1.2.38	Integer32	read-only	Description.
MAC hwWlanRadioMac	1.3.6.1.4.1.2011.6.139.16.1.2.1.20	MacAddress	read-only	This object indicates the MAC address of the interface.
U32 hwWlanRadioMaximumEIRP	1.3.6.1.4.1.2011.6.139.16.1.2.1.46	Unsigned32	read-only	This object indicates the maximum power of a radio, invalid value is 255.
I32 hwWlanRadioMaxMtu	1.3.6.1.4.1.2011.6.139.16.1.2.1.18	Integer32	read-only	This object indicates the maximum transmit unit (MTU) of the interface.
I32 hwWlanRadioMaxStaNum	1.3.6.1.4.1.2011.6.139.16.1.1.2.42	Integer32	read-write	Description.
I32 hwWlanRadioMaxTxPwrLvl	1.3.6.1.4.1.2011.6.139.16.1.2.1.12	Integer32	read-only	This object indicates the maximum transmit power.
U32 hwWlanRadioMngChannel	1.3.6.1.4.1.2011.6.139.16.1.1.2.30	Unsigned32	read-only	Description.
INT hwWlanRadioMngChannelBandwidth	1.3.6.1.4.1.2011.6.139.16.1.1.2.29	INTEGER	read-only	Description.
I32 hwWlanRadioMngPowerLevel	1.3.6.1.4.1.2011.6.139.16.1.1.2.31	Integer32	read-only	Description.
U32 hwWlanRadioMngSecondChannel	1.3.6.1.4.1.2011.6.139.16.1.1.2.35	Unsigned32	read-only	Description.
I32 hwWlanRadioNoise	1.3.6.1.4.1.2011.6.139.16.1.2.1.24	Integer32	read-only	This object indicates the interference noise of the radio. Invalid value is 0.
hwWlanRadioObjectGroups	1.3.6.1.4.1.2011.6.139.16.3.2
hwWlanRadioObjects	1.3.6.1.4.1.2011.6.139.16.1
U32 hwWlanRadioOnlineStaCnt	1.3.6.1.4.1.2011.6.139.16.1.2.1.40	Unsigned32	read-only	This object indicates the number of online users of the radio.
U32 hwWlanRadioPER	1.3.6.1.4.1.2011.6.139.16.1.2.1.23	Unsigned32	read-only	This object indicates the packet error rate at the wireless side.
INT hwWlanRadioPerformanceStatOperMode	1.3.6.1.4.1.2011.6.139.16.1.2.1.42	INTEGER	read-write	This object indicates the operating mode.
C64 hwWlanRadioPeriodRcvDropFrames	1.3.6.1.4.1.2011.6.139.16.1.2.1.33	Counter64	read-only	This object indicates the number of packets failed to be received by the radio within the echo interval.
C64 hwWlanRadioPeriodRcvErrFrames	1.3.6.1.4.1.2011.6.139.16.1.2.1.34	Counter64	read-only	This object indicates the number of error packets of the radio received within the echo interval.
C64 hwWlanRadioPeriodRcvFrames	1.3.6.1.4.1.2011.6.139.16.1.2.1.43	Counter64	read-only	This object indicates the number of packets of the radio received within the echo interval.
C64 hwWlanRadioPeriodRetryFrames	1.3.6.1.4.1.2011.6.139.16.1.2.1.38	Counter64	read-only	This object indicates the number of packets retransmitted at the wireless side within the echo interval.
C64 hwWlanRadioPeriodSendDropFrames	1.3.6.1.4.1.2011.6.139.16.1.2.1.39	Counter64	read-only	This object indicates the number of packets failed to be sent by the radio within the echo interval.
C64 hwWlanRadioPeriodSendFrames	1.3.6.1.4.1.2011.6.139.16.1.2.1.44	Counter64	read-only	This object indicates the number of packets of the radio sent within the echo interval.
OCT hwWlanRadioPortType	1.3.6.1.4.1.2011.6.139.16.1.2.1.17	OCTET STRING	read-only	This object indicates the interface type.
I32 hwWlanRadioPreActualChannel	1.3.6.1.4.1.2011.6.139.16.1.1.2.27	Integer32	read-only	Description.
U32 hwWlanRadioPreSecondActualChannel	1.3.6.1.4.1.2011.6.139.16.1.1.2.34	Unsigned32	read-only	Description.
I32 hwWlanRadioPwrAttRange	1.3.6.1.4.1.2011.6.139.16.1.2.1.13	Integer32	read-only	This object indicates the power attenuation range.
I32 hwWlanRadioPwrAttValue	1.3.6.1.4.1.2011.6.139.16.1.2.1.14	Integer32	read-only	This object indicates the power adjustment step.
MAC hwWlanRadioQueryPowerlevelApMac	1.3.6.1.4.1.2011.6.139.16.1.3.1.1	MacAddress	not-accessible	This object indicates the MAC address of the AP.
INT hwWlanRadioQueryPowerlevelBandwidth	1.3.6.1.4.1.2011.6.139.16.1.3.1.4	INTEGER	not-accessible	This object indicates the bandwidth.
U32 hwWlanRadioQueryPowerlevelChannel	1.3.6.1.4.1.2011.6.139.16.1.3.1.3	Unsigned32	not-accessible	This object indicates the channel.
hwWlanRadioQueryPowerlevelEntry	1.3.6.1.4.1.2011.6.139.16.1.3.1		not-accessible	The indexes of this table are hwWlanRadioQueryPowerlevelApMac, hwWlanRadioQueryPowerlevelRadioId, hwWlanRadioQueryPowerlevelChannel, and hwWlanRadioQueryPowerlevelBandwidth.
hwWlanRadioQueryPowerlevelGroup	1.3.6.1.4.1.2011.6.139.16.3.2.4			Description.
I32 hwWlanRadioQueryPowerlevelMax	1.3.6.1.4.1.2011.6.139.16.1.3.1.5	Integer32	read-only	This object indicates the maximum power level.
U32 hwWlanRadioQueryPowerlevelRadioId	1.3.6.1.4.1.2011.6.139.16.1.3.1.2	Unsigned32	not-accessible	This object indicates the radio ID.
hwWlanRadioQueryPowerlevelTable	1.3.6.1.4.1.2011.6.139.16.1.3		not-accessible	This table is used to query the maximum power level for specified channel and bandwidth.
C64 hwWlanRadioRcvBytes	1.3.6.1.4.1.2011.6.139.16.1.2.1.31	Counter64	read-only	This object indicates the number of bytes in user packets received at the wireless side.
C64 hwWlanRadioRcvDropFrames	1.3.6.1.4.1.2011.6.139.16.1.2.1.51	Counter64	read-only	This object indicates the number of user packets failed to received at the wireless side.
C64 hwWlanRadioRcvErrFrames	1.3.6.1.4.1.2011.6.139.16.1.2.1.50	Counter64	read-only	This object indicates the number of wrong user packets received at the wireless side.
C64 hwWlanRadioRcvFramesEx	1.3.6.1.4.1.2011.6.139.16.1.2.1.30	Counter64	read-only	This object indicates the number of user packets received at the wireless side.
U32 hwWlanRadioRecvRate	1.3.6.1.4.1.2011.6.139.16.1.2.1.32	Unsigned32	read-only	This object indicates the downstream rate at the wireless side.
INT hwWlanRadioReferenceDataAnalysis	1.3.6.1.4.1.2011.6.139.16.1.2.1.58	INTEGER	read-only	This object indicates the status of the referencing data-analysis function. The default value is 2.
C64 hwWlanRadioRetryFrames	1.3.6.1.4.1.2011.6.139.16.1.2.1.49	Counter64	read-only	This object indicates the number of user packets retransmitted at the wireless side.
INT hwWlanRadioRunState	1.3.6.1.4.1.2011.6.139.16.1.2.1.6	INTEGER	read-only	This object indicates the running status of the radio.
U32 hwWlanRadioRxRatio	1.3.6.1.4.1.2011.6.139.16.1.2.1.28	Unsigned32	read-only	This object indicates the packet receiving ratio.
U32 hwWlanRadioSecondActualChannel	1.3.6.1.4.1.2011.6.139.16.1.1.2.33	Unsigned32	read-only	Description.
C64 hwWlanRadioSendBytes	1.3.6.1.4.1.2011.6.139.16.1.2.1.36	Counter64	read-only	This object indicates the number of bytes in user packets sent at the wireless side.
C64 hwWlanRadioSendFrames	1.3.6.1.4.1.2011.6.139.16.1.2.1.35	Counter64	read-only	This object indicates the number of user packets sent at the wireless side.
U32 hwWlanRadioSendRate	1.3.6.1.4.1.2011.6.139.16.1.2.1.37	Unsigned32	read-only	This object indicates the upstream rate at the wireless side.
INT hwWlanRadioSpectrumSwitchFlag	1.3.6.1.4.1.2011.6.139.16.1.2.1.47	INTEGER	read-only	This object indicates the spectrum switch flag of a radio.
I32 hwWlanRadioStaAveSignalStrength	1.3.6.1.4.1.2011.6.139.16.1.2.1.41	Integer32	read-only	This object indicates the number of online users of the radio.
I32 hwWlanRadioStaNum	1.3.6.1.4.1.2011.6.139.16.1.1.2.41	Integer32	read-write	Description.
hwWlanRadioTrap	1.3.6.1.4.1.2011.6.139.16.1.1.1
hwWlanRadioTrapGroup	1.3.6.1.4.1.2011.6.139.16.3.2.1			Description.
hwWlanRadioTrapObjectGroup	1.3.6.1.4.1.2011.6.139.16.3.2.2			Description.
hwWlanRadioTrapObjects	1.3.6.1.4.1.2011.6.139.16.1.1.2
hwWlanRadioTraps	1.3.6.1.4.1.2011.6.139.16.1.1
INT hwWlanRadioTxPowerSelectMode	1.3.6.1.4.1.2011.6.139.16.1.2.1.54	INTEGER	read-only	This object indicates the power selection Mode
U32 hwWlanRadioTxRatio	1.3.6.1.4.1.2011.6.139.16.1.2.1.27	Unsigned32	read-only	This object indicates the packet transmitting ratio.
U32 hwWlanRadioType	1.3.6.1.4.1.2011.6.139.16.1.2.1.4	Unsigned32	read-only	This object indicates the radio type (b\g\n\ac\ax).
I32 hwWlanRadioUacUserNum	1.3.6.1.4.1.2011.6.139.16.1.1.2.26	Integer32	read-only	Description.
hwWlanRadioUncontrolAPInfEntry	1.3.6.1.4.1.2011.6.139.16.1.4.1		not-accessible	The index of this table is hwWlanUncontrolApId.
hwWlanRadioUncontrolAPInfTable	1.3.6.1.4.1.2011.6.139.16.1.4		not-accessible	This table is used to query rogue AP information.
U32 hwWlanRadioWorkingChannel	1.3.6.1.4.1.2011.6.139.16.1.2.1.7	Unsigned32	read-only	This object indicates the actual channel of a radio.
INT hwWlanRadioWorkingChannelBandwidth	1.3.6.1.4.1.2011.6.139.16.1.2.1.10	INTEGER	read-only	This object indicates the actual channel bandwidth.
U32 hwWlanRadioWorkingPower	1.3.6.1.4.1.2011.6.139.16.1.2.1.9	Unsigned32	read-only	This object indicates the power determined by the actual power level.
U32 hwWlanRadioWorkingPowerLevel	1.3.6.1.4.1.2011.6.139.16.1.2.1.8	Unsigned32	read-only	This object indicates the actual power level of a radio.
U32 hwWlanRadioWorkingSecondChannel	1.3.6.1.4.1.2011.6.139.16.1.2.1.52	Unsigned32	read-only	This object indicates the second working channel of a radio.
INT hwWlanRadioWorkMode	1.3.6.1.4.1.2011.6.139.16.1.2.1.11	INTEGER	read-only	This object indicates the radio working mode.normal(1): The radio works in normal mode.monitor(2): The radio works in monitor mode and uses current band scanning.dualBand(4): The radio works in monitor mode and uses dual band scanning.dualBand(5): The radio works in monitor mode and uses proxy dual band scanning.
MAC hwWlanUncontrolApBSSID	1.3.6.1.4.1.2011.6.139.16.1.4.1.2	MacAddress	read-only	This object indicates the BSSID of the rogue AP.
U32 hwWlanUncontrolApChannel	1.3.6.1.4.1.2011.6.139.16.1.4.1.4	Unsigned32	read-only	This object indicates the working channel of the rogue AP.
I32 hwWlanUncontrolApId	1.3.6.1.4.1.2011.6.139.16.1.4.1.1	Integer32	not-accessible	This object indicates the index of the rogue AP.
I32 hwWlanUncontrolApRSSI	1.3.6.1.4.1.2011.6.139.16.1.4.1.5	Integer32	read-only	This object indicates the RSSI of the neighboring AP, in dBm.
OCT hwWlanUncontrolApSSID	1.3.6.1.4.1.2011.6.139.16.1.4.1.6	OCTET STRING	read-only	This object indicates the SSID of the rogue AP.
U32 hwWlanWIDSTrapInfoAPId	1.3.6.1.4.1.2011.6.139.16.1.1.2.32	Unsigned32	read-only	Description.
MAC hwWlanWIDSTrapInfoAPMAC	1.3.6.1.4.1.2011.6.139.16.1.1.2.19	MacAddress	read-only	Description.
OCT hwWlanWIDSTrapInfoAPName	1.3.6.1.4.1.2011.6.139.16.1.1.2.17	OCTET STRING	read-only	Description.
I32 hwWlanWIDSTrapInfoRadioId	1.3.6.1.4.1.2011.6.139.16.1.1.2.18	Integer32	read-only	Description.
I32 hwWlanWIDSTrapInfoRogueChanID	1.3.6.1.4.1.2011.6.139.16.1.1.2.24	Integer32	read-only	Description.
MAC hwWlanWIDSTrapInfoRogueMAC	1.3.6.1.4.1.2011.6.139.16.1.1.2.20	MacAddress	read-only	Description.
I32 hwWlanWIDSTrapInfoRogueRSSI	1.3.6.1.4.1.2011.6.139.16.1.1.2.23	Integer32	read-only	Description.
OCT hwWlanWIDSTrapInfoRogueSSId	1.3.6.1.4.1.2011.6.139.16.1.1.2.21	OCTET STRING	read-only	Description.
I32 hwWlanWIDSTrapInfoRogueType	1.3.6.1.4.1.2011.6.139.16.1.1.2.22	Integer32	read-only	Description.

RFC description

Monitors wireless radio signal quality, channel configuration and interference metrics for Huawei WLAN access points.

Start monitoring Huawei WLAN access point radio, managed via AC (channel/power/interference) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-WLAN-AP-RADIO-MIB