HUAWEI-WLAN-AC-MIB

All MIBs › HUAWEI-WLAN-AC-MIB

Organization: Huawei Technologies co.,Ltd.

Last Updated: 2009-07-25

Category: Domain: Wireless, Technology: Wireless, Vendor: Huawei, Wireless and WLAN

Description: Huawei WLAN Access Controller MIB for managing AP discovery, AC configuration, WLAN radio policies, and client associations.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-WLAN-AC-MIB?

HUAWEI-WLAN-AC-MIB is a Huawei proprietary MIB managing wireless Access Controller (AC) infrastructure bindings, specifically the mapping between wireless tunnel-access interfaces and their physical slots, and board-reassembly bindings for distributed AC hardware. Its tables, keyed by interface index or slot ID, record slot assignment and row status for each binding. As a configuration/hardware-status MIB it lets an administrator confirm a wireless tunnel-access interface is correctly bound to its intended slot on a modular AC chassis. It is deployed on Huawei wireless LAN controllers (AC) with modular slot-based hardware. Engineers can download the HUAWEI-WLAN-AC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-WLAN-AC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei wireless LAN controllers (AC), modular chassis

Monitoring Examples

An administrator checks hwWlanTunnelAccessSlotId for a tunnel-access interface reporting connectivity loss to confirm it's still correctly bound to the expected physical slot after a hardware change.

What Can Be Monitored

tunnel-access interface to physical slot binding

Imported Objects

From HUAWEI-WLAN-MIB

hwWlan

MODULE-IDENTITY

From IF-MIB

InterfaceIndex

From P-BRIDGE-MIB

EnabledStatus

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwWlanACManagement	1.3.6.1.4.1.2011.6.139.100			Wlan AC management.
I32 hwWlanAcSourceBind	1.3.6.1.4.1.2011.6.139.100.1	Integer32	read-write	Bind the loopback number as ac source.
hwWlanTunnelAccessInterfaceBindTable	1.3.6.1.4.1.2011.6.139.100.2		not-accessible	Bind the interface as the access interface when the access type is tunnle access.
hwWlanTunnelAccessInterfaceBindEntry	1.3.6.1.4.1.2011.6.139.100.2.1		not-accessible	The entry of hwWlanTunnelAccessInterfaceBindTable.
NUM hwWlanTunnelAccessInterfaceIndex	1.3.6.1.4.1.2011.6.139.100.2.1.1	InterfaceIndex	not-accessible	The index of the tunnel access interface.
I32 hwWlanTunnelAccessSlotId	1.3.6.1.4.1.2011.6.139.100.2.1.2	Integer32	not-accessible	The slot id of the board which receive the user packets.
ROW hwWlanTunnelAccessInterfaceBindRawStatus	1.3.6.1.4.1.2011.6.139.100.2.1.3	RowStatus	read-write	This table can be created and deleted.
hwWlanRessembleBoardBindTable	1.3.6.1.4.1.2011.6.139.100.3		not-accessible	The table which configrate wlan ressemble board bind table.
hwWlanRessembleBoardBindEntry	1.3.6.1.4.1.2011.6.139.100.3.1		not-accessible	The entry of hwWlanRessembleBoardBindTable.
I32 hwWlanRessembleBoardBindSlotId	1.3.6.1.4.1.2011.6.139.100.3.1.1	Integer32	not-accessible	The slot id of the board which will be bind as the ressemble board.
ROW hwWlanRessembleBoardBindRawStatus	1.3.6.1.4.1.2011.6.139.100.3.1.2	RowStatus	read-write	This table can be created and deleted.
hwWlanAccessTypeEnableTable	1.3.6.1.4.1.2011.6.139.100.4		not-accessible	The table configurate the wlan access type of the access interface. It can be used for ethernet interface/ethernet sub interface/trunk interface/trunk sub interface.
hwWlanAccessTypeEnableEntry	1.3.6.1.4.1.2011.6.139.100.4.1		not-accessible	The entry of hwWlanAccessTypeEnableTable.
NUM hwWlanAccessIfIndex	1.3.6.1.4.1.2011.6.139.100.4.1.1	InterfaceIndex	not-accessible	The index of the wlan access interface.
ENA hwWlanDirectAccessEnable	1.3.6.1.4.1.2011.6.139.100.4.1.2	EnabledStatus	read-create	Enable the access type of the wlan access interface as direct access.
hwWlanAccessInfoTable	1.3.6.1.4.1.2011.6.139.100.5		not-accessible	The table of wlan ap access infomation.
hwWlanAccessInfoEntry	1.3.6.1.4.1.2011.6.139.100.5.1		not-accessible	The entry of hwWlanAccessInfoTable.
I32 hwWlanAccessInfoApIndex	1.3.6.1.4.1.2011.6.139.100.5.1.1	Integer32	not-accessible	The index of ap device.
IP hwWlanAccessInfoApIP	1.3.6.1.4.1.2011.6.139.100.5.1.2	IpAddress	read-only	The ip address of the ap device.
I32 hwWlanAccessInfoApControlPort	1.3.6.1.4.1.2011.6.139.100.5.1.3	Integer32	read-only	The control port of the ap device.
I32 hwWlanAccessInfoApDataPort	1.3.6.1.4.1.2011.6.139.100.5.1.4	Integer32	read-only	The data port of the ap device.
OCT hwWlanAccessInfoAccessInterfaceName	1.3.6.1.4.1.2011.6.139.100.5.1.5	OCTET STRING	read-only	The access interface name of the ap device.
I32 hwWlanAccessInfoAccessType	1.3.6.1.4.1.2011.6.139.100.5.1.6	Integer32	read-only	The access type of the ap device.
hwWlanVeSubInterfaceWlanEnableTable	1.3.6.1.4.1.2011.6.139.100.6		not-accessible	When the wlan access type is tunnle access, the virtual ethernet sub interface must be configurated wlan enble to be used by the wlan user.
hwWlanVeSubInterfaceWlanEnableEntry	1.3.6.1.4.1.2011.6.139.100.6.1		not-accessible	The entry of hwWlanVeSubInterfaceWlanEnableTable.
NUM hwWlanVeSubInterfaceIndex	1.3.6.1.4.1.2011.6.139.100.6.1.1	InterfaceIndex	not-accessible	The index of the WLAN virtual etherner interface which used for the wlan user access.
ENA hwWlanVeSubInterfaceWlanEnable	1.3.6.1.4.1.2011.6.139.100.6.1.2	EnabledStatus	read-write	Enable wlan.
hwWlanAcManageGroups	1.3.6.1.4.1.2011.6.139.100.7
hwWlanAcSourceBindGroup	1.3.6.1.4.1.2011.6.139.100.7.1			Bind the loopback number as ac source.
hwWlanTunnelAccessInterfaceBindGroup	1.3.6.1.4.1.2011.6.139.100.7.2			Bind the interface as the access interface when the access type is tunnle access.
hwWlanRessembleBoardBindGroup	1.3.6.1.4.1.2011.6.139.100.7.3			Configurate wlan ressemble board bind.
hwWlanAccessTypeEnableGroup	1.3.6.1.4.1.2011.6.139.100.7.4			Configurate the wlan access type of the access interface.
hwWlanAccessInfoGroup	1.3.6.1.4.1.2011.6.139.100.7.5			Wlan ap access infomation.
hwWlanVeSubInterfaceWlanEnableGroup	1.3.6.1.4.1.2011.6.139.100.7.6			When the wlan access type is tunnle access, the virtual ethernet sub interface must be configurated wlan enble to be used by the wlan user.

RFC description

Manages WLAN Access Controller (AC) configuration on Huawei devices, supporting tunnel interface binding and source binding.

Start monitoring Huawei wireless LAN controller (AC), modular chassis (slot bindings) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-WLAN-AC-MIB

What Is HUAWEI-WLAN-AC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description