| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoWlanVlanMIB | 1.3.6.1.4.1.9.9.268 | | | This MIB module provides network management
support for device VLAN configuration on
IEEE 802.11 wireless LAN.
ACRONYMS
AES
Advanced Encryption Standard, an encryption
mechanism.
MIC
Message Integrity Check.
WEP
Wired Equivalent Privacy, an encryption mechanism. |
| ciscoWlanVlanMIBNotifications | 1.3.6.1.4.1.9.9.268.0 | | | |
| NTF ciscoWlanVlanWepChangeNotif | 1.3.6.1.4.1.9.9.268.0.1 | | | This ciscoWlanVlanWepChangeNotif notification
will be sent when the WEP configuration
in the cwvlWlanNUcastKeyTable is changed.
The cwvlWlanNUcastKeyValue specify the new key
value for a given key for a VLAN. The sending
of these notifications can be enabled or disabled
via the cwvlWlanWepChangeNotifEnabled object. |
| ciscoWlanVlanMIBObjects | 1.3.6.1.4.1.9.9.268.1 | | | |
| cwvlRoamDomainConfig | 1.3.6.1.4.1.9.9.268.1.1 | | | |
| T/F cwvlWlanDot1qEncapEnabled | 1.3.6.1.4.1.9.9.268.1.1.1 | TruthValue | read-write | This object enables and disables IEEE 802.1Q
type encapsulation for all VLANs. If this object
is set to 'false', then the 802.1Q encapsulation
is disabled on all interfaces. If this object
is set to 'true', then the 802.1Q encapsulation
is enabled on all interfaces. |
| CWV cwvlBridgingNativeVlanId | 1.3.6.1.4.1.9.9.268.1.1.2 | CwvlVlanIdOrZero | read-write | This object specifies the native VLAN ID for layer
2 bridging. If this object is set to '0', there is
no layer 2 bridging native VLAN ID. Setting this
object will automatically update the dot1qPvid for
all interfaces in the Q-BRIDGE-MIB (if supported) to
the same value provided it is not '0'. The dot1qPvid
will be read-only. The dot1qPvid specifies the native
VLAN ID on each device interface. If this object is
'0', the return value of dot1qPvid is not valid.
If the device is attached to a VLAN port of an Ethernet
bridge or switch, then the device must have a non-zero
native VLAN ID, and that VLAN ID must also match the
VLAN ID of the port on the bridge or switch. The native
VLAN ID is the default VLAN ID for frames received that
are not otherwise associated with a VLAN ID. |
| T/F cwvlVoIPVlanEnabled | 1.3.6.1.4.1.9.9.268.1.1.3 | TruthValue | read-write | This object enables and disables VoIP VLAN
functionality for this agent. If this object is
set to 'true', and cwvlVoIPVlanId is a non-zero,
the value of the cwvlVoIPVlanId object is the
user-configured VoIP VLAN ID. If this object is
set to 'true', and cwvlVoIPVlanId is CDP VVID,
this agent automatically enables the VoIP VLAN
when it receives CDP messages with non-zero VVID
field on its root port, otherwise, the VoIP VLAN
is disabled. If this object is set to 'false',
then the VoIP VLAN is disabled and no station can
associate with a VoIP VLAN ID. |
| CWV cwvlVoIPVlanId | 1.3.6.1.4.1.9.9.268.1.1.4 | CwvlVlanIdOrZero | read-write | This object is the VoIP VLAN ID. All VoIP VLAN
ID values are non-zero VLAN ID. A value of '0' is
used to represent CDP VVID. |
| CWV cwvlPublicVlanId | 1.3.6.1.4.1.9.9.268.1.1.5 | CwvlVlanIdOrZero | read-write | The object is the Public VLAN ID. This VLAN is
the only VLAN which may be configured on an 802.11
network interface to not require WEP encryption. All
other VLANs require WEP encryption in order
to isolate the broadcast domains. If the value of
object is '0', there is no specific VLAN ID for
the Public VLAN. |
| cwvlDot11VlanConfig | 1.3.6.1.4.1.9.9.268.1.2 | | | |
| cwvlWlanVlanTable | 1.3.6.1.4.1.9.9.268.1.2.1 | | not-accessible | This table contains attributes for configuration
and security management of VLANs. Devices can
configure to have multiple VLANs on an interface.
VLANs on different interfaces of the same VLAN ID
must have the same configuration. Therefore,
attributes for each conceptual row applies to the
VLANs of the corresponding VLAN ID on all
interfaces. |
| cwvlWlanVlanEntry | 1.3.6.1.4.1.9.9.268.1.2.1.1 | | not-accessible | Each entry includes parameters for to enable
VLAN and configure encryption and key usages
for a particular VLAN. |
| CWV cwvlWlanVlanId | 1.3.6.1.4.1.9.9.268.1.2.1.1.1 | CwvlVlanIdOrZero | not-accessible | This is the VLAN ID to which the parameters in
each conceptual row shall be applied. |
| T/F cwvlWlanEnabled | 1.3.6.1.4.1.9.9.268.1.2.1.1.2 | TruthValue | read-create | If the value is 'true', this VLAN is enabled on
all trunk and hybrid ports. If the value is 'false',
this VLAN is disabled on all ports. |
| U32 cwvlWlanNUcastKeyRotateInterval | 1.3.6.1.4.1.9.9.268.1.2.1.1.3 | Unsigned32 | read-create | The object specifies the WEP encryption key
rotation period. If the value is '0', it indicates
no key rotation. |
| INT cwvlWlanEncryptionMode | 1.3.6.1.4.1.9.9.268.1.2.1.1.4 | INTEGER | read-create | Encryption mode used on the VLANs are:
none (1) - No encryption and use VLan as security
mechanism,
wep (2) - WEP encryption,
aes (3) - Advanced Encryption Standard. |
| T/F cwvlWlanEncryptionMandatory | 1.3.6.1.4.1.9.9.268.1.2.1.1.5 | TruthValue | read-create | Encryption option for wep(2) selection of
cwvlWlanEncryptionMode:
'true' - WEP encryption is mandatory,
'false' - WEP encryption is option. |
| CDO cwvlWlanMicAlgorithm | 1.3.6.1.4.1.9.9.268.1.2.1.1.6 | CDot11IfMicAlgorithm | read-create | This is the auxiliary MIC type used on WEP-encoded
packets for client stations assigned to this VLAN. |
| CDO cwvlWlanWepKeyPermuteAlgorithm | 1.3.6.1.4.1.9.9.268.1.2.1.1.7 | CDot11IfWepKeyPermuteAlgorithm | read-create | This is the function through which the WEP
encryption key is permuted between key renewal
periods for client stations assigned to this VLAN. |
| T/F cwvlWlanWepKeyHashing | 1.3.6.1.4.1.9.9.268.1.2.1.1.8 | TruthValue | read-create | This is an optional key hashing for WEP encryption.
If the value is 'true', the hashing option is applied.
If the value is 'false', the hashing option is not
applied to WEP encryption. |
| INT cwvlWlanEncryptionAlgorithm | 1.3.6.1.4.1.9.9.268.1.2.1.1.9 | INTEGER | read-create | This object determines if Standard IEEE 802.11 or
Cisco propriety AES, MIC, and hashing for WEP
encryption is applied. If the value is standard(1), the
Standard IEEE 802.11 encryption is applied. If the
value is cisco(2), the Cisco propriety encryption is
applied. |
| ROW cwvlWlanRowStatus | 1.3.6.1.4.1.9.9.268.1.2.1.1.10 | RowStatus | read-create | This is used to create a new row, modify or
delete an existing row and a VLAN configuration
in this table.
A VLAN can only be activated by setting this
object to `active' by the agent. When it is
`active', the VLAN is being used or referenced
in other system configurations.
A VLAN should only be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') if only if it is not referenced
by all associated system configurations. |
| cwvlWlanNUcastKeyTable | 1.3.6.1.4.1.9.9.268.1.2.2 | | not-accessible | This table contains shared WEP keys for all IEEE
802.11 packets transmitted and received frames over
a VLAN identified by the cwvlWlanVlanId if encryption
is enabled (i.e., the cwvlWlanEncryptionMode is
wep(2) or aes(3)) on the VLAN.
If WEP encryption is enabled for the transmitted
IEEE 802.11 frames, then the Default Shared WEP
key in the set are used to encrypt the transmitted
both broadcast and multicast frames associated with
the cwvlWlanVlanId. Key '1' in the set is the
default key. The Default Shared WEP key is
also used to encrypt or decrypt unicast frames,
associated with the cwvlWlanVlanId, if an individual
session key is not defined for the target station
address. |
| cwvlWlanNUcastKeyEntry | 1.3.6.1.4.1.9.9.268.1.2.2.1 | | not-accessible | Each entry contains the key index, key length, and
key value. There is a maximum of 4 keys per VLAN or
key set. Each key set is indexed by the VLAN ID. |
| U32 cwvlWlanNUcastKeyIndex | 1.3.6.1.4.1.9.9.268.1.2.2.1.1 | Unsigned32 | not-accessible | This object is a representative of the
corresponding 802.11 WEP Key Index used when
transmitting or receiving frames with this key.
SNMP table indexing conventions require table
index to be non-zero. Therefore, this object has
to be one greater than the actual 802.11 WEP key
index. A value of '1' for this object corresponds
to a value of '0' for the 802.11 WEP key index. |
| U32 cwvlWlanNUcastKeyLen | 1.3.6.1.4.1.9.9.268.1.2.2.1.2 | Unsigned32 | read-write | This object specifies the length in octets of
cwvlWlanNUcastKeyValue. Common values are 5 for
40-bit WEP key and 13 for 128-bit WEP key. A value
of '0' means that the key is not set. |
| WEP cwvlWlanNUcastKeyValue | 1.3.6.1.4.1.9.9.268.1.2.2.1.3 | WepKeyType128 | read-write | This is the WEP secret key value. The agent
always returns a zero-length string when this
object is read for security reason. |
| T/F cwvlWlanWepChangeNotifEnabled | 1.3.6.1.4.1.9.9.268.1.2.3 | TruthValue | read-write | Indicates whether ciscoWlanVlanWepChangeNotif
notifications will or will not be sent by
the agent when the WEP key in the
cwvlWlanNUcastKeyTable are changed. |
| ciscoWlanVlanMIBConformance | 1.3.6.1.4.1.9.9.268.2 | | | |
| ciscoWlanVlanMIBCompliances | 1.3.6.1.4.1.9.9.268.2.1 | | | |
| ciscoWlanVlanMIBCompliance | 1.3.6.1.4.1.9.9.268.2.1.1 | | | The compliance statement for the
ciscoWlanVlanMIBGroups. |
| ciscoWlanVlanMIBGroups | 1.3.6.1.4.1.9.9.268.2.2 | | | |
| ciscoWlanRoamDomainGroup | 1.3.6.1.4.1.9.9.268.2.2.1 | | | Global VLAN configuration for wireless LAN
roaming domain. |
| ciscoWlanDot11VlanConfigGroup | 1.3.6.1.4.1.9.9.268.2.2.2 | | | Per VLAN based configurations for IEEE 802.11
wireless LAN. |
| ciscoWlanVlanNotificationGroup | 1.3.6.1.4.1.9.9.268.2.2.3 | | | This is the notification group for the
CISCO-WLAN-VLAN-MIB. |
