HUAWEI-SHDSL-MIB

All MIBs › HUAWEI-SHDSL-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2013--0-8-

Category: DSL and Broadband, Domain: DSL, Vendor: Huawei

Description: Huawei SHDSL (Symmetric High-Speed DSL) MIB for managing SHDSL line profiles, performance counters, and alarm thresholds.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-SHDSL-MIB?

HUAWEI-SHDSL-MIB is a Huawei enterprise MIB for Symmetric High-speed DSL (SHDSL) line management, extending the standard IETF HDSL2-SHDSL-LINE-MIB (RFC 4319) with Huawei-specific line profile and alarm objects. It exposes configuration data (line profiles, rate/mode settings) alongside performance counters and alarm thresholds for SHDSL copper-line transceivers. Its core monitoring use is hardware/line health: tracking signal quality, error-second counts, and threshold-crossing alarms that reveal a degrading or failing copper line before it drops. It explicitly depends on and extends the standard HDSL2-SHDSL-LINE-MIB, so it should be read alongside that RFC-defined module. Typical deployment is on Huawei DSL access multiplexers (DSLAMs) or broadband gateways delivering symmetric DSL service to business or backhaul customers. Engineers can download the HUAWEI-SHDSL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-SHDSL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei DSLAM
Huawei SHDSL line card
Huawei broadband access device

Monitoring Examples

An administrator would poll SHDSL performance counters (modeled on the standard shdsl line-table performance entries this MIB extends) alongside Huawei-specific alarm-threshold objects to catch a line whose error-second count is climbing, signaling impending SHDSL circuit failure due to line noise or a physical fault.

What Can Be Monitored

SHDSL line profile settings
line performance counters
error seconds
alarm threshold status

Imported Objects

From HDSL2-SHDSL-LINE-MIB

hdsl2Shdsl15MinIntervalNumber	OBJECT-TYPE
hdsl2Shdsl1DayIntervalNumber	OBJECT-TYPE
hdsl2ShdslEndpointSide	OBJECT-TYPE
hdsl2ShdslEndpointWirePair	OBJECT-TYPE
hdsl2ShdslInvIndex	OBJECT-TYPE
hdsl2ShdslSpanConfProfileEntry	OBJECT-TYPE
hdsl2ShdslSpanConfProfileName	OBJECT-TYPE
hdsl2ShdslSpanStatusEntry	OBJECT-TYPE
hdsl2ShdslStatusActualLineRate	OBJECT-TYPE

From HUAWEI-DEVICE-MIB

hwFrameIndex	OBJECT-TYPE
hwPortIndex	OBJECT-TYPE
hwPortOperStatus	OBJECT-TYPE
hwSlotIndex	OBJECT-TYPE

From HUAWEI-MIB

huaweiUtility

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwShdsl	1.3.6.1.4.1.2011.6.35			The HUAWEI SHDSL MIB,extend based on HDSL2-SHDSL-LINE-MIB-rfc4319.mib.
hwShdslPortBindConfTable	1.3.6.1.4.1.2011.6.35.2		not-accessible	shdsl port bing configuration Table
hwShdslPortBindConfEntry	1.3.6.1.4.1.2011.6.35.2.1		not-accessible	The entry of hwShdslPortBindConfTable. hwShdslGroupIndex should be equal to hwShdslIfIndexFirst. hwShdslIfIndexFirst is the fisrt ifindex of the binding group. hwShdslIfIndexSecond is the second ifindex of the binding group. When binding SHDSL port, RowStatus should be createAndGo(4). When unbinding SHDSL port, RowStatus should be destroy(6).
U32 hwShdslGroupIndex	1.3.6.1.4.1.2011.6.35.2.1.1	Unsigned32	read-only	Group index of the binding group.
U32 hwShdslIfIndexFirst	1.3.6.1.4.1.2011.6.35.2.1.2	Unsigned32	read-write	Fisrt ifindex of the binding group. Should be specified when binding SHDSL port.
U32 hwShdslIfIndexSecond	1.3.6.1.4.1.2011.6.35.2.1.3	Unsigned32	read-write	Second ifindex of the binding group. Should be specified when binding SHDSL port.
ROW hwShdslPortBindRowStatus	1.3.6.1.4.1.2011.6.35.2.1.4	RowStatus	read-write	rowStatus, which support the createAndGo and destroy.
hwShdslPortBindTable	1.3.6.1.4.1.2011.6.35.3		not-accessible	This table supports the configuration of port type in the SLC and SLF board
hwShdslPortBindEntry	1.3.6.1.4.1.2011.6.35.3.1		not-accessible	This table supports the configuration of port type in the SLC and SLF board
I32 hwShdslPortBindPriPort	1.3.6.1.4.1.2011.6.35.3.1.1	Integer32	read-only	SHDSL bind primary port
INT hwShdslPortBindType	1.3.6.1.4.1.2011.6.35.3.1.2	INTEGER	read-write	SHDSL bind type
U32 hwShdslPortBindPortList	1.3.6.1.4.1.2011.6.35.3.1.3	Unsigned32	read-write	SHDSL bind ports cover bits.
ROW hwShdslBindRowStatus	1.3.6.1.4.1.2011.6.35.3.1.4	RowStatus	read-write	The row administration status, only supporting add or delete. add means bind, delete means undo the bind
hwShdslChipsetModeTable	1.3.6.1.4.1.2011.6.35.4		not-accessible	This table supports the configuration of the chipset mode of SHDSL board
hwShdslChipsetModeEntry	1.3.6.1.4.1.2011.6.35.4.1		not-accessible	This table supports the configuration of the chipset mode of SHDSL board
I32 hwShdslFrameID	1.3.6.1.4.1.2011.6.35.4.1.1	Integer32	not-accessible	FrameID, the frame id of the device
I32 hwShdslSlotID	1.3.6.1.4.1.2011.6.35.4.1.2	Integer32	not-accessible	SlotID, the slot id of the device
I32 hwShdslChipsetID	1.3.6.1.4.1.2011.6.35.4.1.3	Integer32	not-accessible	ChipsetID, the chipset id of the board
INT hwShdslChipsetMode	1.3.6.1.4.1.2011.6.35.4.1.4	INTEGER	read-write	SHDSL Chipset Mode, the pathmode of the chipset
hwShdslSpanConfProfileTable	1.3.6.1.4.1.2011.6.35.5		not-accessible	This table supports the configuration of the modulation mode of SHDSL line-profile.
hwShdslSpanConfProfileEntry	1.3.6.1.4.1.2011.6.35.5.1		not-accessible	This table supports the configuration of the modulation mode of SHDSL line-profile.
INT hwhdsl2hwShdslSpanConfModulationMode	1.3.6.1.4.1.2011.6.35.5.1.1	INTEGER	read-create	This object defines the modulation mode in the HDSL2/SHDSL span.
INT hwhdsl2hwShdslSpanConfPathMode	1.3.6.1.4.1.2011.6.35.5.1.2	INTEGER	read-create	This object defines path mode of line, M-Pair bonding ports can only work in ATM mode, EFM bonding ports work in PTM mode.
INT hwhdsl2hwShdslSpanConfFrameType	1.3.6.1.4.1.2011.6.35.5.1.3	INTEGER	read-create	This object defines the frame type.
INT hwhdsl2hwShdslSpanConfClkAlign	1.3.6.1.4.1.2011.6.35.5.1.4	INTEGER	read-create	This object defines the synchronization of the clock for sending and receving.
hwShdslSpanStatusTable	1.3.6.1.4.1.2011.6.35.6		not-accessible	This table supports the status information of the modulation mode of SHDSL line-profile.
hwShdslSpanStatusEntry	1.3.6.1.4.1.2011.6.35.6.1		not-accessible	This table supports the status information of the modulation mode of SHDSL line-profile.
INT hwhdsl2hwShdslModulationMode	1.3.6.1.4.1.2011.6.35.6.1.1	INTEGER	read-create	Contains the current modulation mode in the HDSL2/SHDSL span,as reported in an Equipment Response message.
U32 hwhdsl2ShdslStatusCurrLoopAttenUs	1.3.6.1.4.1.2011.6.35.6.1.2	Unsigned32	read-only	Contains the current upstream loop attenuation value in the HDSL2/SHDSL span. It ranges from 0 to 128 units of 1dB.
I32 hwhdsl2ShdslStatusCurrSnrMarginUs	1.3.6.1.4.1.2011.6.35.6.1.3	Integer32	read-only	Contains the current upstream snr margin value in the HDSL2/SHDSL span.
I32 hwhdsl2ShdslStatusCurrPboUs	1.3.6.1.4.1.2011.6.35.6.1.4	Integer32	read-only	Contains the current upstream Power Back-Off in the HDSL2/SHDSL span.
INT hwhdsl2ShdslStatusNtrMode	1.3.6.1.4.1.2011.6.35.6.1.5	INTEGER	read-create	Contains the NTR mode.
I32 hwhdsl2ShdslStatusCurrLoopAttenDs	1.3.6.1.4.1.2011.6.35.6.1.6	Integer32	read-only	Contains the current downstream loop attenuation in the HDSL2/SHDSL span. It ranges from 0 to 128 units of 1dB.
I32 hwhdsl2ShdslStatusCurrSnrMarginDs	1.3.6.1.4.1.2011.6.35.6.1.7	Integer32	read-only	Contains the current downstream SNR margin in the HDSL2/SHDSL span.
I32 hwhdsl2ShdslStatusCurrPboDs	1.3.6.1.4.1.2011.6.35.6.1.8	Integer32	read-only	Contains the current downstream Power Back-Off in the HDSL2/SHDSL span.
hwShdslCrossTalkCanellationGroupTable	1.3.6.1.4.1.2011.6.35.7		not-accessible	This table supports the configuration of the cross talk cancellation group.
hwShdslCrossTalkCanellationGroupEntry	1.3.6.1.4.1.2011.6.35.7.1		not-accessible	This table supports the configuration of the cross talk cancellation group.
U32 hwShdslCrossTalkCanellationGroupIndex	1.3.6.1.4.1.2011.6.35.7.1.1	Unsigned32	not-accessible	The index of shdsl cross talk cancellation group.
OCT hwShdslCrossTalkCanellationGroupPortList	1.3.6.1.4.1.2011.6.35.7.1.2	OCTET STRING	read-write	The port list of the shdsl cross talk cancellation group. Port index indicates the port value.
INT hwShdslCrossTalkCanellationGroupAdminStatus	1.3.6.1.4.1.2011.6.35.7.1.3	INTEGER	read-write	The administration status of the shdsl cross talk cancellation group. When the administration status is deactivate, the port in the group cannot be activated.
INT hwShdslCrossTalkCanellationGroupOperStatus	1.3.6.1.4.1.2011.6.35.7.1.4	INTEGER	read-only	The running status of the shdsl cross talk cancellation group.
ROW hwShdslCrossTalkCanellationGroupRowStatus	1.3.6.1.4.1.2011.6.35.7.1.5	RowStatus	read-write	This object is used to create a new row or to modify or delete an existing row in this table.
hwShdslTrapsVbOids	1.3.6.1.4.1.2011.6.35.8
I32 hwShdsl2ChipsetSwitchResult	1.3.6.1.4.1.2011.6.35.8.1	Integer32	accessible-for-notify	SHDSL Chipset Switch Result
I32 hwShdslPortBindOper	1.3.6.1.4.1.2011.6.35.8.2	Integer32	accessible-for-notify	SHDSL Port Bind operate
I32 hwShdslPortBindNum	1.3.6.1.4.1.2011.6.35.8.3	Integer32	accessible-for-notify	SHDSL Bind Port number
I32 hwhdslSpanConfProfileID	1.3.6.1.4.1.2011.6.35.8.4	Integer32	accessible-for-notify	Indicate the line template item.
OCT hwhdslActivationFailureCause	1.3.6.1.4.1.2011.6.35.8.5	OCTET STRING	accessible-for-notify	Indicate the the reason of the active port fail.
I32 hwhdslChipsetID	1.3.6.1.4.1.2011.6.35.8.6	Integer32	accessible-for-notify	ChipsetID, the chipset id of the board.
hwShdslTraps	1.3.6.1.4.1.2011.6.35.9
hwShdslCommonTraps	1.3.6.1.4.1.2011.6.35.9.1
hwShdslCommonTrapsPrefix	1.3.6.1.4.1.2011.6.35.9.1.0
NTF hwShdslPortStatusChangeTrap	1.3.6.1.4.1.2011.6.35.9.1.0.1			shdsl port status change trap.
NTF hwShdslPortBindChangeTrap	1.3.6.1.4.1.2011.6.35.9.1.0.2			shdsl port bind change trap.
NTF hwShdslChipsetModeSwitchTrap	1.3.6.1.4.1.2011.6.35.9.1.0.3			shdsl chipset mode switch trap.
hwShdslAlarmTraps	1.3.6.1.4.1.2011.6.35.9.2
hwShdslAlarmTrapsPrefix	1.3.6.1.4.1.2011.6.35.9.2.0
NTF hwShdslPortActRateLowerThresholdAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.1			The activation rate of the xDSL line is lower than the threshold.
NTF hwShdslSTUCSnrExceedThresholdAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.2			The STU-C SNR margin exceeds the threshold.
NTF hwShdslSTUCLoopAtteExceedThreAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.3			The STU-C loop attenuation exceeds the threshold.
NTF hwShdslSTUCESSExceedThreAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.4			The STU-C errored seconds (ESs) exceeds the threshold.
NTF hwShdslSTUCSESSExceedThreAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.5			The STU-C severely errored seconds (SESs) exceeds the threshold.
NTF hwShdslSTUCCRCErrExceedThreAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.6			The STU-C CRC errors exceeds the threshold.
NTF hwShdslSTUCLOSWExceedThreAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.7			The STU-C loss of synchronization word (LOSW) exceeds the threshold.
NTF hwShdslSTUCUASSExceedThreAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.8			The STU-C unavailable seconds (UASs) exceeds the threshold.
NTF hwShdslSTURPowerOffThreAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.9			The G.SHDSL STU-R is powered off.
NTF hwShdslPortAutoDeactiveAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.10			The G.SHDSL port is automatically deactivated due to the line fault.
NTF hwShdslPortReactiveAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.11			The G.SHDSL port is re-activated after the line recovers.
NTF hwShdslConfigParaFailedActivateAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.12			The G.SHDSL line configuration parameters fail to activate the port.
NTF hwShdslChipsetNotAvailableAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.13			The G.SHDSL chipset is not available.
NTF hwShdslChipsetRecoverAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.14			The G.SHDSL chipset recovers from a fault.
NTF hwShdslPortDeactiveAlarmTrap	1.3.6.1.4.1.2011.6.35.9.2.0.15			Some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses.
hwShdslEndpointCurrTable	1.3.6.1.4.1.2011.6.35.10		not-accessible	This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines. As with other tables in this MIB module indexed by ifIndex, entries in this table MUST be maintained in a persistent manner.
hwShdslEndpointCurrEntry	1.3.6.1.4.1.2011.6.35.10.1		not-accessible	This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines.
DAT hwShdslEndpointCurr15MinStartTime	1.3.6.1.4.1.2011.6.35.10.1.1	DateAndTime	read-only	Start time of the current 15-minute performance statistics.
DAT hwShdslEndpointCurr1DayStartTime	1.3.6.1.4.1.2011.6.35.10.1.2	DateAndTime	read-only	Start time of the current 1-day performance statistics.
hwShdsl15MinIntervalTable	1.3.6.1.4.1.2011.6.35.11		not-accessible	This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent.
hwShdsl15MinIntervalEntry	1.3.6.1.4.1.2011.6.35.11.1		not-accessible	This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent.
DAT hwShdsl15MinIntervalStartTime	1.3.6.1.4.1.2011.6.35.11.1.1	DateAndTime	read-only	Start time of the historical 15-minute performance statistics.
hwShdsl1DayIntervalTable	1.3.6.1.4.1.2011.6.35.12		not-accessible	This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent.
hwShdsl1DayIntervalEntry	1.3.6.1.4.1.2011.6.35.12.1		not-accessible	This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval.
DAT hwShdsl1DayIntervalStartTime	1.3.6.1.4.1.2011.6.35.12.1.1	DateAndTime	read-only	Start time of the historical 1-day performance statistics.
hwShdslConformance	1.3.6.1.4.1.2011.6.35.13
hwShdslCompliances	1.3.6.1.4.1.2011.6.35.13.1
hwShdslCompliance	1.3.6.1.4.1.2011.6.35.13.1.1			The compliance statement for systems supporting this module.
hwShdslObjectGroups	1.3.6.1.4.1.2011.6.35.13.2
hwShdslPortBindConfGroup	1.3.6.1.4.1.2011.6.35.13.2.1			shdsl port bing group configuration.
hwShdslPortBindGroup	1.3.6.1.4.1.2011.6.35.13.2.2			This table supports the configuration of port type in the SLC and SLF board.
hwShdslChipsetModeGroup	1.3.6.1.4.1.2011.6.35.13.2.3			This table supports the configuration of the chipset mode of SHDSL board.
hwShdslSpanConfProfileGroup	1.3.6.1.4.1.2011.6.35.13.2.4			This table supports the configuration of the modulation mode of SHDSL line-profile.
hwShdslSpanStatusGroup	1.3.6.1.4.1.2011.6.35.13.2.5			This table supports the status information of the modulation mode of SHDSL line-profile.
hwShdslCrossTalkCanellationGroupGroup	1.3.6.1.4.1.2011.6.35.13.2.6			This table supports the configuration of the cross talk cancellation group.
hwShdslTrapsVbOidsGroup	1.3.6.1.4.1.2011.6.35.13.2.7			This table contains Shdsl traps Vb Oids.
hwShdslTrapsGroup	1.3.6.1.4.1.2011.6.35.13.2.8			This table contains Shdsl traps.
hwShdslEndpointCurrGroup	1.3.6.1.4.1.2011.6.35.13.2.9			This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines.
hwShdsl15MinIntervalGroup	1.3.6.1.4.1.2011.6.35.13.2.10			This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval.
hwShdsl1DayIntervalGroup	1.3.6.1.4.1.2011.6.35.13.2.11			This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval.

RFC description

Extends HDSL2/SHDSL line management on Huawei devices with performance monitoring and protection switching capabilities.

Start monitoring Huawei DSLAM / SHDSL line card / broadband access device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-SHDSL-MIB

What Is HUAWEI-SHDSL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description