All MIBs › HUAWEI-MSTP-MIB
Organization: Huawei Technologies co.,Ltd.
Last Updated: 2008-06-14
Category: Protocol: STP, Technology: Switching/L2, Vendor: Huawei
Description: Huawei MSTP (Multiple Spanning Tree Protocol) MIB for managing MST instances, region configuration, and port roles.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-MSTP-MIB?
HUAWEI-MSTP-MIB is a Huawei private enterprise MIB for managing the Multiple Spanning Tree Protocol (MSTP, IEEE 802.1s) implementation on Huawei bridges and switches. It exposes configuration and status data about MST regions, MST instances (mapping VLANs to spanning-tree instances), and the role and state of each bridge port within those instances. While primarily a Layer 2 topology-configuration MIB, it supports monitoring the software status of the spanning-tree protocol itself, such as whether a port is forwarding, blocking, or in an alternate/backup role, which is important for detecting loops or unexpected topology changes. It builds on concepts defined in the IEEE 802.1s/802.1Q MSTP standard and is a Huawei-specific complement to standard bridge MIBs such as the IETF BRIDGE-MIB. It's typically deployed on Huawei enterprise or carrier switches running MSTP to prevent Layer 2 loops across VLAN-segmented networks. Engineers can download the HUAWEI-MSTP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-MSTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei enterprise switch
- Huawei carrier switch
Monitoring Examples
This MIB excerpt provides no specific object or table names, but based on its stated purpose an administrator would typically read the MST region name/revision and per-instance VLAN mapping to confirm all switches agree on region configuration, then poll per-port role and state (root, designated, alternate/backup; forwarding/blocking) for each MST instance. A port unexpectedly reporting a blocking or alternate state, or a region configuration mismatch between switches, would indicate an active spanning-tree loop-prevention event or a misconfiguration.
What Can Be Monitored
- MST region name and revision
- instance-to-VLAN mapping
- per-port MSTP role
- per-port MSTP state
- bridge priority
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| BridgeId |
From HUAWEI-MIB
| hwDatacomm | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
| ifName | OBJECT-TYPE |
From P-BRIDGE-MIB
| EnabledStatus |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwL2Mgmt | 1.3.6.1.4.1.2011.5.25.42 | |||
| hwMstp | 1.3.6.1.4.1.2011.5.25.42.4 | This module include the information about MSTP protocol in the bridge. The information can be read and some of them can be set. | ||
| hwMstpObjects | 1.3.6.1.4.1.2011.5.25.42.4.1 | |||
| HWM hwMstpStatus | 1.3.6.1.4.1.2011.5.25.42.4.1.1 | HwMSTPEnabledStatus | read-write | Whether the Bridge MSTP is enabled. Enable indicate that MSTP enable in the bridge; Disabled indicate that MSTP disable in the bridge. By default, the Bridge MSTP is disabled. |
| INT hwMstpForceVersion | 1.3.6.1.4.1.2011.5.25.42.4.1.2 | INTEGER | read-write | The mode of this Bridge spanning-tree protocol. At present, the bridge hold out STP compatible mode and MSTP . User can set the mode by command line. By default, the mode is MSTP. |
| I32 hwMstpDiameter | 1.3.6.1.4.1.2011.5.25.42.4.1.3 | Integer32 | read-write | The diameter of Bridge. It stands for the scope of the network. It affects the time that include hello time, forward delay time, maxage. Every bridge can set the diameter of Bridge, and it is effective when the bridge is root bridge. Effective in the CIST By default, the diameter is 7. The value of hwMstpDiameter is only unused(65535) when it is read. |
| I32 hwMstpBridgeMaxHops | 1.3.6.1.4.1.2011.5.25.42.4.1.4 | Integer32 | read-write | The maximum value of the Bridge hops. It can limit the scope of the bridge network. It is effective when the bridge is root bridge. The BPDU that the bridge receives from the Designed bridge will be dropped when the hops in the BPDU is zero . By default, the value is 20. |
| BRI hwMstpMasterBridgeID | 1.3.6.1.4.1.2011.5.25.42.4.1.5 | BridgeId | read-only | The Bridge Identifier of the current Master Bridge. It is the root Bridge Identifier of the instance 0 in the region. |
| I32 hwMstpMasterPathCost | 1.3.6.1.4.1.2011.5.25.42.4.1.6 | Integer32 | read-only | The CIST path cost from the transmitting Bridge to the Master Bridge. By default, the value is 0. |
| HWM hwMstpBpduGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.7 | HwMSTPEnabledStatus | read-write | Whether the Bridge BPDU Guard function is enabled. If the function is enabled, the port will shutdown when received BPDU and the port is configured as edgeport. The purpose of the function is to prevent the bridge from BPDU attacking. By default, the function is disabled |
| I32 hwMstpAdminFormatSelector | 1.3.6.1.4.1.2011.5.25.42.4.1.8 | Integer32 | read-only | The administrative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s. By default, the value is 0 |
| OCT hwMstpAdminRegionName | 1.3.6.1.4.1.2011.5.25.42.4.1.9 | OCTET STRING | read-write | This MSTP administrative region name. It changes to hwMstpOperRegionName when user use the activing command to active the configuration of the region. |
| I32 hwMstpAdminRevisionLevel | 1.3.6.1.4.1.2011.5.25.42.4.1.10 | Integer32 | read-write | This MSTP administrative revision level. It changes to hwMstpOperRevisionLevel when user use the activing command to active the configuration of the region. By default, the value is 0. |
| I32 hwMstpOperFormatSelector | 1.3.6.1.4.1.2011.5.25.42.4.1.11 | Integer32 | read-only | The operative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s. By default, the value is 0. |
| OCT hwMstpOperRegionName | 1.3.6.1.4.1.2011.5.25.42.4.1.12 | OCTET STRING | read-only | This MSTP operative region name. It can be used to determine whether the region is the same region with the mapping between VLAN and instance and hwMstpOperRevisionLevel. |
| I32 hwMstpOperRevisionLevel | 1.3.6.1.4.1.2011.5.25.42.4.1.13 | Integer32 | read-only | This MSTP operative revision level. It can be used to determine whether the region is the same region with the mapping between VLAN and instance and hwMstpOperRegionName. By default, the value is 0 |
| INT hwMstpRegionConfActive | 1.3.6.1.4.1.2011.5.25.42.4.1.14 | INTEGER | read-write | Active the region configuration. Generally, the value of the hwMstpRegionConfActive is disable, but the value will be set as enable if Net Manager want to active the configure of the region in the bridge. And then all manager configuration will change to operable configuration. The value of hwMstpRegionConfActive is only disable when it is read. It is only enable when it is set. |
| INT hwMstpDefaultVlanAllo | 1.3.6.1.4.1.2011.5.25.42.4.1.15 | INTEGER | read-write | Set default configuration about VLAN allocation and all VLANs are mapped to CIST. The value of hwMstpDefaultVlanAllo is only unused(65535) when it is read. It is only enable(1) when it is set. |
| INT hwMstpDefaultRegionName | 1.3.6.1.4.1.2011.5.25.42.4.1.16 | INTEGER | read-write | Set default region name. The value of hwMstpDefaultRegionName is only unused(65535) when it is read. It is only reset(1) when it is set. |
| INT hwMstpPathCostStandard | 1.3.6.1.4.1.2011.5.25.42.4.1.17 | INTEGER | read-write | Path cost standard of the bridge. Value dot1d-1998 is IEEE 802.1d standard in 1998, value dot1t is IEEE 802.1t standard, and value legacy is a private legacy standard. The default path cost standard is 2(IEEE 802.1t standard). |
| hwMstpVIDAllocationTable | 1.3.6.1.4.1.2011.5.25.42.4.1.18 | not-accessible | The table includes the information of the VLAN with relation to the instance of MSTP. | |
| hwMstpVIDAllocationEntry | 1.3.6.1.4.1.2011.5.25.42.4.1.18.1 | not-accessible | The table includes the information of the VLAN with relation to the instance of MSTP. The index of the table is vlanid. Default, the VLAN is in the CIST. | |
| I32 hwMstpVID | 1.3.6.1.4.1.2011.5.25.42.4.1.18.1.1 | Integer32 | not-accessible | VLAN Identifier. |
| I32 hwMstpAdminMstID | 1.3.6.1.4.1.2011.5.25.42.4.1.18.1.2 | Integer32 | read-only | Administrative Multiple spanning-tree instance Identifier. The relation between VLAN and Multiple spanning-tree instance is set by operation in the region, but it isn't effective if the configuration isn't actived. The scope of instance identifier is different, some versions are 0 to 48. |
| I32 hwMstpOperMstID | 1.3.6.1.4.1.2011.5.25.42.4.1.18.1.3 | Integer32 | read-only | Operative Multiple spanning-tree instance Identifier. The relation between VLAN and Multiple spanning-tree instance is effective in the bridge. The scope of instance identifier is different, some versions are 0 to 48. |
| hwMstpInstanceTable | 1.3.6.1.4.1.2011.5.25.42.4.1.19 | not-accessible | The table includes the information of the instance. | |
| hwMstpInstanceEntry | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1 | not-accessible | The table includes the information of the instance. The index of the table is Multiple spanning-tree instance Identifier. | |
| I32 hwMstpInstanceID | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.1 | Integer32 | not-accessible | Multiple spanning-tree instance Identifier. The scope of instance identifier is different, some versions are 0 to 48. |
| BRI hwMstpiBridgeID | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.2 | BridgeId | read-only | The Bridge Identifier for the spanning tree instance identified by MSTID. |
| I32 hwMstpiBridgePriority | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.3 | Integer32 | read-create | The Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096.For example, we can set the Priority of the bridge such as 0, 4096, 8192 etc. It can be used to determined whether the bridge is the root of the spanning tree. |
| BRI hwMstpiDesignedRoot | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.4 | BridgeId | read-only | The Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTID. |
| I32 hwMstpiRootPathCost | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.5 | Integer32 | read-only | The path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTID. |
| I32 hwMstpiRootPort | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.6 | Integer32 | read-only | The root port for the spanning tree instance identified by the MSTID. |
| INT hwMstpiRootType | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.7 | INTEGER | read-create | Config this Bridge as a primary root or secondary root / cancel the root for this spanning tree instance identified by MSTID. The current value of the hwMstpiRootType is the value that was set recently. |
| I32 hwMstpiRemainingHops | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.8 | Integer32 | read-only | The remaining hops of the spanning tree instance identified by MSTID. |
| OCT hwMstpiAdminMappedVlanListLow | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.9 | OCTET STRING | read-create | The lower part of administrative VLAN list mapped to the spanning tree instance identified by MSTID. |
| OCT hwMstpiAdminMappedVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.10 | OCTET STRING | read-create | The higher part of administrative VLAN list mapped to the spanning tree instance identified by MSTID. |
| OCT hwMstpiOperMappedVlanListLow | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.11 | OCTET STRING | read-only | The lower part of operative VLAN list mapped to the spanning tree instance identified by MSTID. |
| OCT hwMstpiOperMappedVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.12 | OCTET STRING | read-only | The higher part of operative VLAN list mapped to the spanning tree instance identified by MSTID. |
| ROW hwMstpiRowStatus | 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.13 | RowStatus | read-create | To band MSTI and VLAN List. Operation of CreateAndGo can be used to create a new instance, and operation of Destroy be used to destroy an existent instance. But these operation won't be effective if they are not actived by executing command of active region-configuration or setting mib node of hwMstpRegionConfActive. |
| hwMstpPortTable | 1.3.6.1.4.1.2011.5.25.42.4.1.20 | not-accessible | The table includes the information of the port of the multiple spanning tree instance. | |
| hwMstpPortEntry | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1 | not-accessible | The table includes the information of the port of the multiple spanning tree instance. The index of the table is the aggregation of multiple spanning tree instance identifier and port index. | |
| I32 hwMstpiPortIndex | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.1 | Integer32 | not-accessible | The index of the bridge port. |
| INT hwMstpiState | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.2 | INTEGER | read-only | The current state of the port. It must be disabled, discarding, learning or forwarding. |
| I32 hwMstpiPortPriority | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.3 | Integer32 | read-write | The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mstiPortIndex. And step of 16. It is the priority of the port in the multiple spanning tree instance, and it can be used to determine the role of the port in the multiple spanning tree. |
| I32 hwMstpiPathCost | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.4 | Integer32 | read-write | the path cost of paths with which the package passes the port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard. |
| BRI hwMstpiDesignatedRoot | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.5 | BridgeId | read-only | The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID |
| I32 hwMstpiDesignatedCost | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.6 | Integer32 | read-only | The path cost of the designated port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge BPDUs. |
| BRI hwMstpiDesignatedBridge | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.7 | BridgeId | read-only | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| OCT hwMstpiDesignatedPort | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.8 | OCTET STRING | read-only | The port Identifier of the port on the Designated Bridge for this port's segment. |
| INT hwMstpiStpPortEdgeport | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.9 | INTEGER | read-write | Whether the port fast is enabled. By default, there is no configuration on the port. When the port is the edge port, it can change to forwarding state . We can set the value. Disable indicates that we make the port not to be a edge port. Enable indicates that we make the port to be a edge port. The port's edge port state is same in all instance of MSTP. When set the value, the hwMstpInstanceID must be 0. |
| INT hwMstpiStpPortPointToPoint | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.10 | INTEGER | read-write | Whether the port connects the point to point link. If user set the port as a point to point port, the port is a point to point port in all instance of the MSTP. If user set the port as a point to point port but the port isn't, the mstp may import temporary loop. So user can use the default. When set the value, the hwMstpInstanceID must be 0. |
| INT hwMstpiStpMcheck | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.11 | INTEGER | read-write | When root interface is changed from STP mode to MSTP mode, the appointed interface can not switch to MSTP mode automatically. At the time, you need switch to MSTP mode with hand by set Mcheck value to enable(1). The value of hwMstpiStpMcheck is unused(65535) when it is read.The value of hwMstpiStpMcheck must be enable(1) when it is set. When set the value, the hwMstpInstanceID must be 0. |
| I32 hwMstpiStpTransLimit | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.12 | Integer32 | read-write | The value is used to set BPDU maximum transmission rate of the port . When the value is set, the hwMstpInstanceID must be 0. If value is set 0, the transmit limit of the port is equal to the hwMstpTransmitLimitDefault value. |
| C32 hwMstpiStpRXStpBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.13 | Counter32 | read-only | The number of received Config BPDU. Effective in CIST. |
| C32 hwMstpiStpTXStpBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.14 | Counter32 | read-only | The number of transmitted Config BPDU. Effective in CIST. |
| C32 hwMstpiStpRXTCNBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.15 | Counter32 | read-only | The number of received TCN BPDU. Effective in CIST. |
| C32 hwMstpiStpTXTCNBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.16 | Counter32 | read-only | The number of transmitted TCN BPDU. Effective in CIST. |
| C32 hwMstpiStpRXRSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.17 | Counter32 | read-only | The number of received RST BPDU. Effective in CIST. |
| C32 hwMstpiStpTXRSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.18 | Counter32 | read-only | The number of transmitted RST BPDU. Effective in CIST. |
| C32 hwMstpiStpRXMSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.19 | Counter32 | read-only | The number of received MST BPDU. Effective in CIST. |
| C32 hwMstpiStpTXMSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.20 | Counter32 | read-only | The number of transmitted MST BPDU. Effective in CIST. |
| INT hwMstpiStpClearStatistics | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.21 | INTEGER | read-write | Clear the spanning tree statistic. Effective in CIST. The value of hwMstpiStpClearStatistics is unused(65535) when it is read. The value of hwMstpiStpClearStatistics must be clear(1) when it is set. |
| INT hwMstpiStpDefaultPortCost | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.22 | INTEGER | read-write | Set default port path cost. The value of hwMstpiStpDefaultPortCost is unused(65535) when it is read. The value of hwMstpiStpDefaultPortCost must be reset(1) when it is set. |
| HWM hwMstpiStpStatus | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.23 | HwMSTPEnabledStatus | read-write | Whether the spanning tree protocol is enabled on this port. Effective in CIST. When set the value, the hwMstpInstanceID must be 0. |
| HWM hwMstpiPortRootGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.24 | HwMSTPEnabledStatus | read-write | Whether the root guard is enabled. The function is to prevent the port from receiving the BPDU , the priority of which is above the priority of the port. When set the value, the hwMstpInstanceID must be 0. |
| HWM hwMstpiPortLoopGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.25 | HwMSTPEnabledStatus | read-write | Whether the loop protection is enabled. When set the value, the hwMstpInstanceID must be 0. |
| INT hwMstpPortCompliance | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.26 | INTEGER | read-write | The value of this object identifies the protocol format of the MSTP packet sent and received on the port. The protocol format can be one of the following: 1: auto (the self-adaptive protocol format) 2: dotls (the standard IEEE 802.1s format) 3: legacy (the private protocol format) By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1). |
| HWM hwMstpConfigDigestSnooping | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.27 | HwMSTPEnabledStatus | read-write | This object indicates whether the digest snooping function is enabled on the port: 1: enabled 2: disabled By default, the function is not enabled. In other words, the default value is disabled(2). |
| HWM hwMstpNoAgreementCheck | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.30 | HwMSTPEnabledStatus | read-write | Whether enhance agreement is enabled. When Huawei datacomm devices running the VRP are internetworking with non-Huawei devices, you need to enable this on Huawei devices to configure the mode of the fast transition mechanism the same as that on non-Huawei devices. |
| HWM hwMstpPortTCNotify | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.31 | HwMSTPEnabledStatus | read-write | The main interface notifies its sub-interfaces to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted. |
| INT hwMstpiStpPortBpduFilter | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.32 | INTEGER | read-write | Whether the port BPDU-filter is enabled. By default, there is no configuration on the port. The port will not send or receive BPDUs. |
| INT hwMstpiPortRole | 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.33 | INTEGER | read-only | Indicates the port role on a particular instance. |
| INT hwMstpSnooping | 1.3.6.1.4.1.2011.5.25.42.4.1.21 | INTEGER | read-write | when the device's interface receive TCN, the servers is normal in device where MSTP is disable. By default, the value is disabled. |
| hwMstpAccessoryTable | 1.3.6.1.4.1.2011.5.25.42.4.1.22 | not-accessible | The table of MSTP Accessory Information. | |
| hwMstpAccessoryEntry | 1.3.6.1.4.1.2011.5.25.42.4.1.22.1 | not-accessible | The table entry of MSTP Accessory Information. | |
| I32 hwMstpAccessoryIndex | 1.3.6.1.4.1.2011.5.25.42.4.1.22.1.1 | Integer32 | not-accessible | The index of the Accessory Commands of MSTP. |
| INT hwMstpBackupReplyAgreement | 1.3.6.1.4.1.2011.5.25.42.4.1.22.1.2 | INTEGER | read-write | When the port of device, which played the backup or alternate role, receives the BPDU message with high priority, and the proposal flag of this message was set. The BPDU message can be send from this port immediately, the agreement flag was set of this BPDU message. |
| INT hwMstpStpNoAgreementCheck | 1.3.6.1.4.1.2011.5.25.42.4.1.22.1.3 | INTEGER | read-write | when the port is root, calculating allsyned without check syned flag of root. |
| hwMstpProTable | 1.3.6.1.4.1.2011.5.25.42.4.1.23 | not-accessible | The MSTP process information table. | |
| hwMstpProEntry | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1 | not-accessible | Entry of the MSTP process information table. | |
| I32 hwMstpProID | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.1 | Integer32 | not-accessible | MSTP process identifier. |
| HWM hwMstpProStpState | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.4 | HwMSTPEnabledStatus | read-create | Whether Spannting-Tree is enabled or not on a MSTP process. |
| I32 hwMstpProPriority | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.5 | Integer32 | read-create | The priority for the MSTP process spanning tree, step of 4096. For example, we can set the Priority of the bridge such as 0, 4096, 8192 etc. It can be used to determined whether the process is the root of the whole spanning tree. The default value is 32768. |
| INT hwMstpProRootType | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.6 | INTEGER | read-create | Config this MSTP process as a primary root, secondary root or cancel the root for spanning tree. The default value is not a primary or secondary root. |
| INT hwMstpProForceVersion | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.7 | INTEGER | read-create | Mode of Spanning-Tree portocol on a MSTP process. |
| HWM hwMstpProBpduGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.8 | HwMSTPEnabledStatus | read-create | Whether BPDU portection is enabled or not on a MSTP process. |
| I32 hwMstpProDiameter | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.9 | Integer32 | read-create | The Spanning-Tree diameter of a MSTP process, the default value is 7. The value of hwMstpProDiameter is only unused(65535) when it is read. |
| INT hwMstpProConvergeMode | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.10 | INTEGER | read-create | Spanning-Tree converge mode. When the mode is fast, MAC entries and ARP entries will be deleted. When the mode is normal, the entries will be aged. |
| I32 hwMstpProMaxHops | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.11 | Integer32 | read-create | Maxhops of a MSTP process, the default value is 20. |
| INT hwMstpProMCheck | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.12 | INTEGER | read-create | Whether to do Mcheck function on a MSTP process. |
| INT hwMstpProPathCostStandard | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.13 | INTEGER | read-create | Path cost standard of a MSTP process, the fault value is dot1t. |
| I32 hwMstpProHelloTime | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.14 | Integer32 | read-create | Hello time of a MSTP process, the default value is 200 centiseconds. |
| I32 hwMstpProFwdDelay | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.15 | Integer32 | read-create | Forward delay of a MSTP process, the default value is 1500 centiseconds. |
| I32 hwMstpProMaxAge | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.16 | Integer32 | read-create | Max age of a MSTP process, the default value is 2000 centiseconds. |
| I32 hwMstpProTimerFactor | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.17 | Integer32 | read-create | Timer factor, which is used in loop protection, the default value is 3. |
| OCT hwMstpProTCNotify | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.18 | OCTET STRING | read-create | The current MSTP process notifies the specified STP instance in MSTP process 0 to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted. |
| OCT hwMstpProNoLinkSharePortList | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.19 | OCTET STRING | read-create | The port list participates in the status calculation of a specified MSTP process witch no-link-share method. |
| OCT hwMstpProLinkSharePortList | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.20 | OCTET STRING | read-create | The port list participates in the status calculation of a specified MSTP process witch link-share method. |
| HWM hwMstpProTcGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.21 | HwMSTPEnabledStatus | read-create | Whether the TC protection function is enabled on the MSTP process. If the function is enabled, the TC message exceeded threshold will be defered to deal with at the end of TC protection time. |
| I32 hwMstpProTcGuardThreshold | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.22 | Integer32 | read-create | The threshold of the TC protection on the MSTP process. It decided the maximum TC messages can be dealt with in a TC protection time. |
| ENA hwMstpProTcNotifyProcess | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.23 | EnabledStatus | read-create | Whether the current MSTP process notifies MSTP process 0 to update MAC entries and ARP entries after receiving a TC message. |
| ENA hwMstpProRegionConfActive | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.24 | EnabledStatus | read-create | Active the region configuration. Generally, the value of the hwMstpProRegionConfActive is disable, but the value will be set as enable if Net Manager want to active the configure of the region in the bridge. And then all manager configuration will change to operable configuration. The value of hwMstpRegionConfActive is only disable when it is read. It is only enable when it is set. |
| ENA hwMstpProLinkShareGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.25 | EnabledStatus | read-create | Whether the Link-share Guard function is enabled on the MSTP process. If the function is enabled, the root Guard function will also work on port in all instance besides instance 0, when the link between the ports either of which is in Link_share mode broken down. |
| OCT hwMstpConfigDegist | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.26 | OCTET STRING | read-only | This MSTP region-configuration digest. It can be used to determine whether the region is the same region with another one. |
| ENA hwMstpProRegionConfShare | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.27 | EnabledStatus | read-only | Suggesting that whether all the process will share the same Region-config with process 0. If the function is enable, all the existing process will share the same Region-config with process 0. |
| ROW hwMstpProRowStatus | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.30 | RowStatus | read-create | MSTP process table rowstatus. |
| I32 hwMstpProTcGuardInterval | 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.31 | Integer32 | read-write | The value is the tc-protection interval time. If the value is set 0, the tc guard interval value is euqal to the hello time. |
| hwMstpPortBindTable | 1.3.6.1.4.1.2011.5.25.42.4.1.24 | not-accessible | The port bind table. | |
| hwMstpPortBindEntry | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1 | not-accessible | The port bind entry. | |
| I32 hwMstpPortId1 | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.1 | Integer32 | not-accessible | The port external port index. |
| I32 hwMstpPortId2 | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.2 | Integer32 | not-accessible | The port external port index. |
| I32 hwMstpPortId3 | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.3 | Integer32 | not-accessible | The port external port index. |
| I32 hwMstpPortId4 | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.4 | Integer32 | not-accessible | The port external port index. |
| I32 hwMstpPortIdFlag | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.5 | Integer32 | not-accessible | The port type. |
| OCT hwMstpPortVlanListLow | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.6 | OCTET STRING | read-create | The VLAN list of port. |
| OCT hwMstpPortVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.7 | OCTET STRING | read-create | The VLAN list of port. |
| INT hwMstpProNewPortType | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.8 | INTEGER | read-create | An interface to participate in the status calculation of link-share , no-link-share or no-link-share with VLAN Spanning Tree processes. |
| I32 hwMstpProNewPortBpduVlan | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.9 | Integer32 | read-create | The VLAN of port is BPDU VLAN. |
| ROW hwMstpPortBindRowStatus | 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.100 | RowStatus | read-create | MSTP port binding table rowstatus. |
| hwMstpProPortTable | 1.3.6.1.4.1.2011.5.25.42.4.1.25 | not-accessible | The table includes the information of the port of the MSTP process. | |
| hwMstpProPortEntry | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1 | not-accessible | The entry of the MSTP process port information table. | |
| INT hwMstpProPortState | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.2 | INTEGER | read-only | The current state of the port in MSTP process. It must be disabled, discarding, learning or forwarding. |
| I32 hwMstpProPortPriority | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.3 | Integer32 | read-write | The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of hwMstpiPortIndex. And step of 16. It is the priority of the port in the MSTP process, and it can be used to determine the role of the port in the MSTP process Spanning Tree. |
| I32 hwMstpProPortPathCost | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.4 | Integer32 | read-write | The path cost of paths with which the package passes the port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard. |
| BRI hwMstpProPortDesignatedRoot | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.5 | BridgeId | read-only | The Bridge Identifier of the Root Bridge for the port of the MSTP process Spanning Tree. |
| I32 hwMstpProPortDesignatedCost | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.6 | Integer32 | read-only | The path cost of the designated port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge BPDUs. |
| BRI hwMstpProPortDesignatedBridge | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.7 | BridgeId | read-only | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| OCT hwMstpProPortDesignatedPort | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.8 | OCTET STRING | read-only | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| HWM hwMstpProPortStpEdgeport | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.9 | HwMSTPEnabledStatus | read-write | Whether the port fast is enabled in the MSTP process. When the port is the edge port, it can change to forwarding state immediately. |
| INT hwMstpProPortStpPointToPoint | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.10 | INTEGER | read-write | Whether the port connects the point to point link. If user set the port as a point to point port, the port is a point to point port in the MSTP process. If user set the port as a point to point port but the port isn't, the mstp may import temporary loop. So user can use the default. |
| INT hwMstpProPortStpMcheck | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.11 | INTEGER | read-write | When root interface is changed from STP mode to RSTP or MSTP mode, the appointed interface can not switch to RSTP or MSTP mode automatically. At the time, you need switch back with hand by set Mcheck value to enable(1). The value unused(65535) when it is read. |
| I32 hwMstpProPortStpTransLimit | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.12 | Integer32 | read-write | The value used by the port transmit state machine to limit the maximum transmission rate. |
| C32 hwMstpProPortStpRXStpBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.13 | Counter32 | read-only | The number of received Config BPDUs. |
| C32 hwMstpProPortStpTXStpBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.14 | Counter32 | read-only | The number of transmitted Config BPDUs. |
| C32 hwMstpProPortStpRXTCNBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.15 | Counter32 | read-only | The number of received TCN BPDUs. |
| C32 hwMstpProPortStpTXTCNBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.16 | Counter32 | read-only | The number of transmitted TCN BPDUs. |
| C32 hwMstpProPortStpRXRSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.17 | Counter32 | read-only | The number of received RST BPDUs. |
| C32 hwMstpProPortStpTXRSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.18 | Counter32 | read-only | The number of transmitted RST BPDUs. |
| C32 hwMstpProPortStpRXMSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.19 | Counter32 | read-only | The number of received MST BPDUs. |
| C32 hwMstpProPortStpTXMSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.20 | Counter32 | read-only | The number of transmitted MST BPDUs. |
| INT hwMstpProPortStpClearStatistics | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.21 | INTEGER | read-write | Clear the Spanning Tree statistics in specified MSTP process. The value is unused(65535) when it is read. The value must be clear(1) when it is set. |
| INT hwMstpProPortStpDefaultPortCost | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.22 | INTEGER | read-write | Set default port path cost. |
| HWM hwMstpProPortStpStatus | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.23 | HwMSTPEnabledStatus | read-write | Whether the Spanning Tree Protocol is enabled on this port. |
| HWM hwMstpProPortRootGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.24 | HwMSTPEnabledStatus | read-write | Whether the root guard is enabled. The function is to prevent the port from receiving the BPDUs, the priority of which is above the priority of the port. |
| HWM hwMstpProPortLoopGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.25 | HwMSTPEnabledStatus | read-write | Whether the loop protection is enabled. |
| INT hwMstpProPortCompliance | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.26 | INTEGER | read-write | The value of this object identifies the protocol format of the MSTP packet sent and received on the port. The protocol format can be one of the following: 1: auto (the self-adaptive protocol format) 2: dotls (the standard IEEE 802.1s format) 3: legacy (the private protocol format) By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1). |
| HWM hwMstpProPortConfigDigestSnooping | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.27 | HwMSTPEnabledStatus | read-write | This object indicates whether the digest snooping function is enabled on the port: 1: enabled 2: disabled By default, the function is not enabled. In other words, the default value is disabled(2). |
| HWM hwMstpProPortNoAgreementCheck | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.30 | HwMSTPEnabledStatus | read-write | Whether enhance agreement is enabled. When Huawei datacomm devices running the VRP are internetworking with non-Huawei devices, you need to enable this on Huawei devices to configure the mode of the fast transition mechanism the same as that on non-Huawei devices. |
| HWM hwMstpProPortTCNotify | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.31 | HwMSTPEnabledStatus | read-write | The main interface notifies its sub-interfaces to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted. |
| INT hwMstpProPortType | 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.32 | INTEGER | read-only | An interface to participate in the status calculation of link-share or no-link-share Spanning Tree processes. |
| HWM hwMstpTcGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.26 | HwMSTPEnabledStatus | read-write | Whether the Bridge TC Guard function is enabled. If the function is enabled, the TC message in each instance exceeded threshold will be defered to deal with at the end of TC protection time. By default, the function is disabled. |
| I32 hwMstpTcGuardThreshold | 1.3.6.1.4.1.2011.5.25.42.4.1.27 | Integer32 | read-write | The threshold of the Bridge TC Guard. It decided the maximum TC message in each instance can be dealt with in a TC protection time. |
| hwMstpProInstanceTable | 1.3.6.1.4.1.2011.5.25.42.4.1.28 | not-accessible | ||
| hwMstpProInstanceEntry | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1 | not-accessible | The entry of the MSTP process instance information table. | |
| BRI hwMstpProInstanceBridgeID | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.1 | BridgeId | read-only | The Bridge Identifier for the spanning tree instance identified by MSTID. |
| I32 hwMstpProInstanceBridgePriority | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.2 | Integer32 | read-create | The Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096.For example, we can set the Priority of the bridge such as 0, 4096, 8192 etc. It can be used to determined whether the bridge is the root of the spanning tree. |
| BRI hwMstpProInstanceDesignedRoot | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.3 | BridgeId | read-only | The Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTID. |
| I32 hwMstpProInstanceRootPathCost | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.4 | Integer32 | read-only | The path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTID. |
| I32 hwMstpProInstanceRootPort | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.5 | Integer32 | read-only | The root port for the spanning tree instance identified by the MSTID. |
| INT hwMstpProInstanceRootType | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.6 | INTEGER | read-create | Config this Bridge as a primary root or secondary root / cancel the root for this spanning tree instance identified by MSTID. The current value of the hwMstpiRootType is the value that was set recently. |
| I32 hwMstpProInstanceRemainingHops | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.7 | Integer32 | read-only | The remaining hops of the spanning tree instance identified by MSTID. |
| OCT hwMstpProInstanceAdminMappedVlanListLow | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.8 | OCTET STRING | read-create | The lower part of administrative VLAN list mapped to the spanning tree instance identified by MSTID. |
| OCT hwMstpProInstanceAdminMappedVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.9 | OCTET STRING | read-create | The higher part of administrative VLAN list mapped to the spanning tree instance identified by MSTID. |
| OCT hwMstpProInstanceOperMappedVlanListLow | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.10 | OCTET STRING | read-only | The lower part of operative VLAN list mapped to the spanning tree instance identified by MSTID. |
| OCT hwMstpProInstanceOperMappedVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.11 | OCTET STRING | read-only | The higher part of operative VLAN list mapped to the spanning tree instance identified by MSTID. |
| ROW hwMstpProInstanceRowStatus | 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.100 | RowStatus | read-create | To band MSTI and VLAN List. Operation of CreateAndGo can be used to create a new instance, and operation of Destroy be used to destroy an existent instance. But these operation won't be effective if they are not actived by executing command of active region-configuration or setting mib node of hwMstpRegionConfActive. |
| hwMstpProNewPortTable | 1.3.6.1.4.1.2011.5.25.42.4.1.29 | not-accessible | The table includes the information of the port of the MSTP process. | |
| hwMstpProNewPortEntry | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1 | not-accessible | The entry of the MSTP process port information table. | |
| INT hwMstpProNewPortState | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.1 | INTEGER | read-only | The current state of the port in MSTP process. It must be disabled, discarding, learning or forwarding. |
| I32 hwMstpProNewPortPriority | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.2 | Integer32 | read-write | The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of hwMstpiPortIndex. And step of 16. It is the priority of the port in the MSTP process, and it can be used to determine the role of the port in the MSTP process Spanning Tree. |
| I32 hwMstpProNewPortPathCost | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.3 | Integer32 | read-write | The path cost of paths with which the package passes the port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard. |
| BRI hwMstpProNewPortDesignatedRoot | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.4 | BridgeId | read-only | The Bridge Identifier of the Root Bridge for the port of the MSTP process Spanning Tree. |
| I32 hwMstpProNewPortDesignatedCost | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.5 | Integer32 | read-only | The path cost of the designated port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge BPDUs. |
| BRI hwMstpProNewPortDesignatedBridge | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.6 | BridgeId | read-only | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| OCT hwMstpProNewPortDesignatedPort | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.7 | OCTET STRING | read-only | The port identifier of the port on the Designated Bridge for this port's segment. |
| INT hwMstpProNewPortStpEdgeport | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.8 | INTEGER | read-write | Whether the port fast is enabled in the MSTP process. By default, there is no configuration on the port. When the port is the edge port, it can change to forwarding state immediately. |
| INT hwMstpProNewPortStpPointToPoint | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.9 | INTEGER | read-write | Whether the port connects the point to point link. If user set the port as a point to point port, the port is a point to point port in the MSTP process. If user set the port as a point to point port but the port isn't, the mstp may import temporary loop. So user can use the default. |
| INT hwMstpProNewPortStpMcheck | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.10 | INTEGER | read-write | When root interface is changed from STP mode to RSTP or MSTP mode, the appointed interface can not switch to RSTP or MSTP mode automatically. At the time, you need switch back with hand by set Mcheck value to enable(1). The value unused(65535) when it is read. |
| I32 hwMstpProNewPortStpTransLimit | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.11 | Integer32 | read-write | The value is used to set BPDU maximum transmission rate of the port. If value is set 0, the transmit limit of the port is equal to the wMstpTransmitLimitDefault value |
| C32 hwMstpProNewPortStpRXStpBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.12 | Counter32 | read-only | The number of received Config BPDUs. |
| C32 hwMstpProNewPortStpTXStpBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.13 | Counter32 | read-only | The number of transmitted Config BPDUs. |
| C32 hwMstpProNewPortStpRXTCNBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.14 | Counter32 | read-only | The number of received TCN BPDUs. |
| C32 hwMstpProNewPortStpTXTCNBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.15 | Counter32 | read-only | The number of transmitted TCN BPDUs. |
| C32 hwMstpProNewPortStpRXRSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.16 | Counter32 | read-only | The number of received RST BPDUs. |
| C32 hwMstpProNewPortStpTXRSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.17 | Counter32 | read-only | The number of transmitted RST BPDUs. |
| C32 hwMstpProNewPortStpRXMSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.18 | Counter32 | read-only | The number of received MST BPDUs. |
| C32 hwMstpProNewPortStpTXMSTPBPDU | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.19 | Counter32 | read-only | The number of transmitted MST BPDUs. |
| INT hwMstpProNewPortStpClearStatistics | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.20 | INTEGER | read-write | Clear the Spanning Tree statistics in specified MSTP process. The value is unused(65535) when it is read. The value must be clear(1) when it is set. |
| INT hwMstpProNewPortStpDefaultPortCost | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.21 | INTEGER | read-write | Set default port path cost. |
| ENA hwMstpProNewPortStpStatus | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.22 | EnabledStatus | read-write | Whether the Spanning Tree Protocol is enabled on this port. |
| ENA hwMstpProNewPortRootGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.23 | EnabledStatus | read-write | Whether the root guard is enabled. The function is to prevent the port from receiving the BPDUs, the priority of which is above the priority of the port. |
| ENA hwMstpProNewPortLoopGuard | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.24 | EnabledStatus | read-write | Whether the loop protection is enabled. |
| INT hwMstpProNewPortCompliance | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.25 | INTEGER | read-write | The value of this object identifies the protocol format of the MSTP packet sent and received on the port. The protocol format can be one of the following: 1: auto (the self-adaptive protocol format) 2: dotls (the standard IEEE 802.1s format) 3: legacy (the private protocol format) By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1). |
| ENA hwMstpProNewPortConfigDigestSnooping | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.26 | EnabledStatus | read-write | This object indicates whether the digest snooping function is enabled on the port: 1: enabled 2: disabled By default, the function is not enabled. In other words, the default value is disabled(2). |
| ENA hwMstpProNewPortNoAgreementCheck | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.27 | EnabledStatus | read-write | Whether enhance agreement is enabled. When Huawei datacomm devices running the VRP are internetworking with non-Huawei devices, you need to enable this on Huawei devices to configure the mode of the fast transition mechanism the same as that on non-Huawei devices. |
| ENA hwMstpProNewPortVplsSubinterfaceEnable | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.28 | EnabledStatus | read-write | The main interface notifies its sub-interfaces to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted. |
| INT hwMstpProNewPortBpduEncapsulation | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.29 | INTEGER | read-write | The value of this object identifies the protocol format of the BPDU sent on the port. The protocol format can be one of the following: 1: pvst (the PVST format) 2: stp (the STP format) By default, the BPDU format of the MSTP packet is stp(2). |
| INT hwMstpProNewPortBpduFilter | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.30 | INTEGER | read-write | Whether the port BPDU-filter is enabled. By default, there is no configuration on the port. The port will not send or receive BPDUs. |
| C32 hwMstpProNewPortStpRXTC | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.31 | Counter32 | read-only | The number of TC BPDUs received by the port. |
| C32 hwMstpProNewPortStpTXTC | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.32 | Counter32 | read-only | The number of TC BPDUs sent by the port. |
| INT hwMstpProNewPortRole | 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.33 | INTEGER | read-only | Indicates the port role on a particular instance. |
| HWM hwMstpEdgedPortDefault | 1.3.6.1.4.1.2011.5.25.42.4.1.30 | HwMSTPEnabledStatus | read-write | When the stp edged-port default is enabled. By default,the port enabled stp is edged-port . |
| HWM hwMstpBpduFilterPortDefault | 1.3.6.1.4.1.2011.5.25.42.4.1.31 | HwMSTPEnabledStatus | read-write | When the stp BPDU-filter default is enabled. By default,the stp BPDU filter function is enabled . |
| I32 hwMstpTransmitLimitDefault | 1.3.6.1.4.1.2011.5.25.42.4.1.32 | Integer32 | read-write | The value is used to set BPDU maximum transmission rate of all port in the device. |
| hwMstpTraps | 1.3.6.1.4.1.2011.5.25.42.4.2 | Definition point for Mstp notifications. | ||
| NTF hwMstpiPortStateForwarding | 1.3.6.1.4.1.2011.5.25.42.4.2.1 | The SNMP trap that is generated when a port turns into forwarding state from other state. | ||
| NTF hwMstpiPortStateDiscarding | 1.3.6.1.4.1.2011.5.25.42.4.2.2 | The SNMP trap that is generated when a port turns into discarding state from forwarding state. | ||
| NTF hwMstpiBridgeLostRootPrimary | 1.3.6.1.4.1.2011.5.25.42.4.2.3 | The SNMP trap that is generated when the bridge is no longer the root bridge of the instance. Another switch with higher priority has already been the root bridge of the instance. | ||
| NTF hwMstpiPortRootGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.4 | The SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance. | ||
| NTF hwMstpiPortBpduGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.5 | The SNMP trap that is generated when an edged port of the BPDU-guard switch receives BPDU packets. | ||
| NTF hwMstpiPortLoopGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.6 | The SNMP trap that is generated when an Alternate-Port or Root-Port is aged out. | ||
| NTF hwMstpiEdgePortChanged | 1.3.6.1.4.1.2011.5.25.42.4.2.7 | When the edged-port receives a BPDU packet, the edged-port attribute will be disabled. Then the SNMP trap is generated. | ||
| NTF hwMstpProPortStateForwarding | 1.3.6.1.4.1.2011.5.25.42.4.2.8 | The SNMP trap that is generated when a port turns into forwarding state from other state in the MSTP process. | ||
| NTF hwMstpProPortStateDiscarding | 1.3.6.1.4.1.2011.5.25.42.4.2.9 | The SNMP trap that is generated when a port turns into discarding state from forwarding state in the MSTP process. | ||
| NTF hwMstpProBridgeLostRootPrimary | 1.3.6.1.4.1.2011.5.25.42.4.2.10 | The SNMP trap that is generated when the bridge is no longer the root bridge of the MSTP process Spanning Tree. Another switch with higher priority has already been the root bridge. | ||
| NTF hwMstpProPortRootGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.11 | The SNMP trap that is generated when a root-guard port receives a superior message in the MSTP process. | ||
| NTF hwMstpProPortBpduGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.12 | The SNMP trap that is generated when an edged port of the BPDU-guard MSTP process receives BPDU packets. | ||
| NTF hwMstpProPortLoopGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.13 | The SNMP trap that is generated when an Alternate-Port or Root-Port is aged out in the MSTP process. | ||
| NTF hwMstpProEdgePortChanged | 1.3.6.1.4.1.2011.5.25.42.4.2.14 | When the edged-port receives a BPDU packet, the edged-port attribute will be disabled. Then the SNMP trap is generated. | ||
| NTF hwMstpiTcGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.15 | The SNMP trap that is generated when an MSTP instance receive TC BPDUs' number exceeds the threshold. | ||
| NTF hwMstpProTcGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.16 | The SNMP trap that is generated when an MSTP process receive TC BPDUs' number exceeds the threshold. | ||
| NTF hwMstpProRootChanged | 1.3.6.1.4.1.2011.5.25.42.4.2.17 | The SNMP trap that is generated when the root bridge of an instance of a MSTP process changed | ||
| NTF hwMstpProNewPortStateForwarding | 1.3.6.1.4.1.2011.5.25.42.4.2.18 | Specify that the status of the port STP becomes Forwarding in MSTP process. | ||
| NTF hwMstpProNewPortStateDiscarding | 1.3.6.1.4.1.2011.5.25.42.4.2.19 | Specify that the status of the port STP becomes Discarding in MSTP process. | ||
| NTF hwMstpProNewBridgeLostRootPrimary | 1.3.6.1.4.1.2011.5.25.42.4.2.20 | Specify that the switch loses the position of root bridge in MSTP process. | ||
| NTF hwMstpProNewPortRootGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.21 | Specify that a designated port receives a BPDU packet with the priority higher than that of the root bridge when root bridge protection is enabled in MSTP process. | ||
| NTF hwMstpProNewPortBpduGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.22 | Specify that the edge port receives the BPDU packets when BPDU protection was enabled in MSTP process. | ||
| NTF hwMstpProNewPortLoopGuarded | 1.3.6.1.4.1.2011.5.25.42.4.2.23 | Specify that the root port has not received any BPDU packets for a long time when loop protection is enabled in MSTP process. | ||
| NTF hwMstpProNewEdgePortChanged | 1.3.6.1.4.1.2011.5.25.42.4.2.24 | Specify that the edge port is invalid because of receiving a BPDU packet. | ||
| NTF hwMstpProLoopbackDetected | 1.3.6.1.4.1.2011.5.25.42.4.2.25 | When port detected loopback, block the port and arise trap. | ||
| hwMstpConformance | 1.3.6.1.4.1.2011.5.25.42.4.3 | |||
| hwMstpGroups | 1.3.6.1.4.1.2011.5.25.42.4.3.1 | |||
| hwMstpBridgeInfoGroup | 1.3.6.1.4.1.2011.5.25.42.4.3.1.1 | A collection of objects indicating the necessary capabilites of the bridge device which is running the multi spanning tree protocol. | ||
| hwMstpVlanInfoGroup | 1.3.6.1.4.1.2011.5.25.42.4.3.1.2 | A collection of objects describes the attribute of the VLAN in the multi spanning tree protocol. They are necessary to find the relation between VLAN and instance by the VLAN identifier. | ||
| hwMstpInstanceInfoGroup | 1.3.6.1.4.1.2011.5.25.42.4.3.1.3 | A collection of objects describes the attribute of the instance in the multi spanning tree protocol. | ||
| hwMstpPortInfoGroup | 1.3.6.1.4.1.2011.5.25.42.4.3.1.4 | A collection of objects is necessary to show the information of the port in the bridge in the multi spanning tree protocol. | ||
| hwMstpAccessoryGroup | 1.3.6.1.4.1.2011.5.25.42.4.3.1.5 | MSTP accessory group. | ||
| hwMstpNotificationGroup | 1.3.6.1.4.1.2011.5.25.42.4.3.1.6 | Notification. | ||
| hwMstpProGroup | 1.3.6.1.4.1.2011.5.25.42.4.3.1.7 | MSTP process group. | ||
| hwMstpProPortInfoGroup | 1.3.6.1.4.1.2011.5.25.42.4.3.1.8 | A collection of objects is necessary to show the information of the port in the bridge in the multi spanning tree protocol. | ||
| hwMstpProNotificationGroup | 1.3.6.1.4.1.2011.5.25.42.4.3.1.9 | MSTP process notification. | ||
| hwMstpProInstanceInfoGroup | 1.3.6.1.4.1.2011.5.25.42.4.3.1.10 | MSTP process instance group. | ||
| hwMstpCompliances | 1.3.6.1.4.1.2011.5.25.42.4.3.2 | |||
| hwMstpCompliance | 1.3.6.1.4.1.2011.5.25.42.4.3.2.1 | The compliance statement for device support of Priority and Multicast Filtering extended bridging services. |
RFC description
Huawei MSTP protocol MIB managing multiple spanning tree process information and bridge configuration in network switches.
Start monitoring Huawei enterprise or carrier switch/bridge (Multiple Spanning Tree Protocol) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.