HUAWEI-MTA-MIB

All MIBs › HUAWEI-MTA-MIB

Last Updated: 2002-10-01

Category: Domain: Telephony/VoIP, Vendor: Huawei

Description: Huawei MTA (Message Transfer Agent) MIB providing management objects for email relay and message transfer functions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-MTA-MIB?

HUAWEI-MTA-MIB is a Huawei proprietary MIB providing management objects for the Message Transfer Agent (MTA) function, which relays and transfers email/messaging traffic on Huawei network or unified-communications equipment. Beyond its terse revision header (authored by a large internal Huawei team), no detailed description text is available in the module, but by its name it would expose configuration and status objects related to mail relay operation, message queues, and transfer statistics. As with most MTA-style MIBs, it would be used to monitor software service status such as queue depth, message throughput, or relay/delivery failures rather than physical hardware sensors. It likely depends on Huawei's private enterprise MIB tree and possibly standard mail-transfer concepts (SMTP) rather than a specific IETF MIB. It would typically be deployed on Huawei messaging gateways or unified-communications platforms that relay email/voicemail notifications within an enterprise network. Engineers can download the HUAWEI-MTA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-MTA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei messaging gateways / unified-communications platforms

Monitoring Examples

An administrator would poll MTA-related queue and status objects to check for a backlog of undelivered messages, which would indicate a downstream mail server or network connectivity problem. A rising count of transfer failures or retries would be a leading indicator of an MTA relay outage. Since detailed object names are not available for this MIB, exact table names would need to be confirmed from the source file, but typical MTA MIBs expose per-queue message counts and last-error status objects.

What Can Be Monitored

message queue depth
relay/transfer success and failure counts
MTA service status

Imported Objects

From HUAWEI-DEVICE-MIB

hwFrameIndex	OBJECT-TYPE
hwPortIndex	OBJECT-TYPE
hwSlotIndex	OBJECT-TYPE

From HUAWEI-MIB

huaweiUtility

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwMTA	1.3.6.1.4.1.2011.6.14			V01-01 mta MIB:HUAWEI-MTA-MIB.mib V1.0 tangrong 17270/huawei, liguanrong 26321/huawei, liaoshunquan 24705/huawei, wangxinran 19281/huawei, liuguoping 17383/huawei, wangxiaoman 20905/huawei, luohui 14047/huawei, chenjiangming 18851/huawei, liuchenglong 25279/huawei, zhuyangbin 30583/huawei, weijiahong 14192/huawei, zhoupeng 22164/huawei, xucongyuan 17403/huawei
hwMTAMibObjects	1.3.6.1.4.1.2011.6.14.1
mtaTable	1.3.6.1.4.1.2011.6.14.1.1		not-accessible	MTA
mtaEntry	1.3.6.1.4.1.2011.6.14.1.1.1		not-accessible	MTA
INT hwMtaState	1.3.6.1.4.1.2011.6.14.1.1.1.1	INTEGER	read-only	the current state of MTA device, including 1.normal, 2.waiting config, 3.new config error, 4.self detect failed, 5.MTA fault
OCT hwMtaHardWareVersion	1.3.6.1.4.1.2011.6.14.1.1.1.2	OCTET STRING	read-only	the current hardware version of MTA device
OCT hwMtaSoftWareVersion	1.3.6.1.4.1.2011.6.14.1.1.1.3	OCTET STRING	read-only	the current software version of MTA device
INT hwMtaProtocol	1.3.6.1.4.1.2011.6.14.1.1.1.4	INTEGER	read-create	the protocol that MTA support, including:1. Defined privately by HONET, 2. x.50 s bit loop, 3. x.50 s bit=1, 4. x.50 s bit=0 5. I.460 protocol. ( the 4th and 5th is not supported now)
INT hwChannel1Mode	1.3.6.1.4.1.2011.6.14.1.1.1.5	INTEGER	read-create	determine working mode of channel 1: a syn. mode, an asyn. mode, or a prohibited mode
INT hwChannel1Rate	1.3.6.1.4.1.2011.6.14.1.1.1.6	INTEGER	read-create	determine the service speed of channel 1
INT hwChannel1DteDce	1.3.6.1.4.1.2011.6.14.1.1.1.7	INTEGER	read-create	determine the polarity of channel 1: DCE or DTE
INT hwChannel1Clock	1.3.6.1.4.1.2011.6.14.1.1.1.8	INTEGER	read-create	the clock locked mode of channel 1: 1. Internal means the clock in MTA device, 2.External means the superior device's clock, 3. Slave means the clock of device access to this channel
I32 hwChannel1SignalLinePhase	1.3.6.1.4.1.2011.6.14.1.1.1.9	Integer32	read-create	the signal line phase of channel 1, determined by four bits of which the less significant defines the clock sending phase, the 2th the clock receiving phase, the 3th the data sending phase, the 4th the data receiving phase. and value 1 means reverse phase, value 0 means in-phase.
I32 hwChannel1AsynLen	1.3.6.1.4.1.2011.6.14.1.1.1.10	Integer32	read-create	the word length of channel 1 working in the asynchro mode, including the starting bit,the data bits and the end bit
INT hwChannel1BChannelNo	1.3.6.1.4.1.2011.6.14.1.1.1.11	INTEGER	read-create	determins the B channel N.O. to carry the data in channel 1
INT hwChannel1EnvolopPhase	1.3.6.1.4.1.2011.6.14.1.1.1.12	INTEGER	read-create	determins the envolop phase to carry the data in channel 1
INT hwChannel1Status	1.3.6.1.4.1.2011.6.14.1.1.1.13	INTEGER	read-only	describes the current state of channel 1
INT hwChannel2Mode	1.3.6.1.4.1.2011.6.14.1.1.1.14	INTEGER	read-create	determine working mode of channel 2: a syn. mode, an asyn. mode, or a prohibited mode
INT hwChannel2Rate	1.3.6.1.4.1.2011.6.14.1.1.1.15	INTEGER	read-create	determine the service speed of channel 2
INT hwChannel2DteDce	1.3.6.1.4.1.2011.6.14.1.1.1.16	INTEGER	read-create	determine the polarity of channel 2: DCE or DTE
INT hwChannel2Clock	1.3.6.1.4.1.2011.6.14.1.1.1.17	INTEGER	read-create	the clock locked mode of channel 2: 1. Internal means the clock in MTA device, 2.External means the superior device's clock, 3. Slave means the clock of device access to this channel
I32 hwChannel2SignalLinePhase	1.3.6.1.4.1.2011.6.14.1.1.1.18	Integer32	read-create	the signal line phase of channel 2, determined by four bits of which the less significant defines the clock sending phase, the 2th the clock receiving phase, the 3th the data sending phase, the 4th the data receiving phase. and value 1 means reverse phase, value 0 means in-phase.
I32 hwChannel2AsynLen	1.3.6.1.4.1.2011.6.14.1.1.1.19	Integer32	read-create	the word length of channel 2 working in the asynchro mode, including the starting bit,the data bits and the end bit
INT hwChannel2BChannelNo	1.3.6.1.4.1.2011.6.14.1.1.1.20	INTEGER	read-create	determins the B channel N.O. to carry the data in channel 2
INT hwChannel2EnvolopPhase	1.3.6.1.4.1.2011.6.14.1.1.1.21	INTEGER	read-create	determins the envolop phase to carry the data in channel 2
INT hwChannel2Status	1.3.6.1.4.1.2011.6.14.1.1.1.22	INTEGER	read-only	describes the current state of channel 2
INT hwChannel3Mode	1.3.6.1.4.1.2011.6.14.1.1.1.23	INTEGER	read-create	determine working mode of channel 3: a syn. mode, an asyn. mode, or a prohibited mode
INT hwChannel3Rate	1.3.6.1.4.1.2011.6.14.1.1.1.24	INTEGER	read-create	determine the service speed of channel 3
INT hwChannel3DteDce	1.3.6.1.4.1.2011.6.14.1.1.1.25	INTEGER	read-create	determine the polarity of channel 3: DCE or DTE
INT hwChannel3Clock	1.3.6.1.4.1.2011.6.14.1.1.1.26	INTEGER	read-create	the clock locked mode of channel 3: 1. Internal means the clock in MTA device, 2.External means the superior device's clock, 3. Slave means the clock of device access to this channel
I32 hwChannel3SignalLinePhase	1.3.6.1.4.1.2011.6.14.1.1.1.27	Integer32	read-create	the signal line phase of channel 1, determined by four bits of which the less significant defines the clock sending phase, the 2th the clock receiving phase, the 3th the data sending phase, the 4th the data receiving phase. and value 1 means reverse phase, value 0 means in-phase.
I32 hwChannel3AsynLen	1.3.6.1.4.1.2011.6.14.1.1.1.28	Integer32	read-create	the word length of channel 3 working in the asynchro mode, including the starting bit,the data bits and the end bit
INT hwChannel3BChannelNo	1.3.6.1.4.1.2011.6.14.1.1.1.29	INTEGER	read-create	determins the B channel N.O. to carry the data in channel 3
INT hwChannel3EnvolopPhase	1.3.6.1.4.1.2011.6.14.1.1.1.30	INTEGER	read-create	determins the envolop phase to carry the data in channel 3
INT hwChannel3Status	1.3.6.1.4.1.2011.6.14.1.1.1.31	INTEGER	read-only	describes the current state of channel 3
OCT hwUserIdentity	1.3.6.1.4.1.2011.6.14.1.1.1.32	OCTET STRING	read-create	the identity label of this MTA, and two or more MTAs may have the same identity label
INT hwMaintainOper	1.3.6.1.4.1.2011.6.14.1.1.1.33	INTEGER	read-write	defines the maintain operation type, no operation(1) is just for GET, and is of no meaning for SET, CancelLoop(2) cancels all loops of the MTA, thus should not be set alongside Loop Object, LocalLoop and RemoteLoop must be bound to the Loop Object, reset operation will reset the MTA, and MTA will not be at loop state.
INT hwLoopObject	1.3.6.1.4.1.2011.6.14.1.1.1.34	INTEGER	read-write	defines the loop object when setting LocalLoop or RemoteLoop operation, Getting this object will get value noOperation(1), while is of no meaning when Setting
I32 hwChannel1AlarmStatus	1.3.6.1.4.1.2011.6.14.1.1.1.35	Integer32	read-only	describes the current alarm status of channel 1, 1 means the device access to MTA channel 1 is not ready, while 0 means the device is ready
I32 hwChannel2AlarmStatus	1.3.6.1.4.1.2011.6.14.1.1.1.36	Integer32	read-only	describes the current alarm status of channel 2, 1 means the device access to MTA channel 1 is not ready, while 0 means the device is ready
I32 hwChannel3AlarmStatus	1.3.6.1.4.1.2011.6.14.1.1.1.37	Integer32	read-only	describes the current alarm status of channel 3, 1 means the device access to MTA channel 1 is not ready, while 0 means the device is ready
I32 hwBChannel1AlarmStatus	1.3.6.1.4.1.2011.6.14.1.1.1.38	Integer32	read-only	describes the current alarm status of B channel 1, determined by two bits of which the less significant defines whether adaptive loss of multi-frame alignment of B channel 1 happened to MTA local equipment, 1 means yes, 0 means no, the most significant bit defines whether adaptive loss of multi-frame alignment of B channel 1 happened to MTA remote equipment, 1 means yes, 0 means no,
I32 hwBChannel2AlarmStatus	1.3.6.1.4.1.2011.6.14.1.1.1.39	Integer32	read-only	describes the current alarm status of B channel 2, determined by two bits of which the less significant defines whether adaptive loss of multi-frame alignment of B channel 2 happened to MTA local equipment, 1 means yes, 0 means no, the most significant bit defines whether adaptive loss of multi-frame alignment of B channel 1 happened to MTA remote equipment, 1 means yes, 0 means no,
ROW hwRowStatus	1.3.6.1.4.1.2011.6.14.1.1.1.40	RowStatus	read-create	MTA supports the operation createAndGo(4) and Destroy(6) only
hwMTAMibTrap	1.3.6.1.4.1.2011.6.14.2
hwMTATrapOid	1.3.6.1.4.1.2011.6.14.2.1
hwMTATrapsDefine	1.3.6.1.4.1.2011.6.14.2.2
hwMTATraps	1.3.6.1.4.1.2011.6.14.2.2.0
hwMTAMibCompance	1.3.6.1.4.1.2011.6.14.3

RFC description

Huawei Multi-Terminal Adapter (MTA) channel and protocol configuration.

Start monitoring Huawei messaging gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-MTA-MIB

What Is HUAWEI-MTA-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description