All MIBs › HUAWEI-IPV6-MIB
Organization: IPv6-Team of Huawei Technologies
Last Updated: 2007-05-24
Category: IP and Core Protocols, Technology: IPv6, Vendor: Huawei
Description: Huawei IPv6 MIB providing extended IPv6 management objects for address configuration, neighbor discovery, routing, and interface statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-IPV6-MIB?
HUAWEI-IPV6-MIB is a Huawei enterprise MIB extending IPv6 protocol management on Huawei networking equipment, covering IPv6 address configuration, neighbor discovery, routing, and interface-level statistics. It falls into the network-protocol/interface-configuration category, exposing objects that describe how IPv6 is configured and operating on each interface of the device. Its monitoring value centers on protocol/software status — confirming IPv6 addresses are correctly assigned, neighbor-discovery/reachability is functioning, and interface-level IPv6 traffic counters are incrementing as expected — rather than physical hardware sensors. It models itself on, and is meant to complement, the standard IETF IPv6 MIBs (such as IP-MIB/IPV6-MIB, RFC 4293/2465) while adding Huawei-specific extensions. It is typically deployed on Huawei routers and switches in networks that have enabled dual-stack or native IPv6 routing, where operators need visibility into IPv6-specific configuration and neighbor state. Engineers can download the HUAWEI-IPV6-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-IPV6-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei router/switch (IPv6-enabled)
Monitoring Examples
No sample object names were provided for this module, so specific object/table identifiers cannot be honestly cited; based on its description, an operator would be expected to poll per-interface IPv6 address and neighbor-discovery-cache objects to confirm addresses are assigned and neighbors are reachable, along with interface IPv6 traffic statistics to spot a stalled or misconfigured IPv6 interface.
What Can Be Monitored
- IPv6 address configuration per interface
- neighbor discovery/reachability state
- IPv6 interface traffic statistics
- IPv6 routing status
Imported Objects
From HUAWEI-MIB
| hwDatacomm | OBJECT-IDENTITY |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From IPV6-MIB
| ipv6IfIndex | OBJECT-TYPE |
From P-BRIDGE-MIB
| EnabledStatus |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| RowStatus |
OIDs
RFC description
IPv6 protocol management for Huawei devices providing configuration and status information for IPv6 interfaces.
Start monitoring Huawei router or switch, IPv6-enabled with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.