HUAWEI-IPDSLAM-MSTP-MIB

All MIBs › HUAWEI-IPDSLAM-MSTP-MIB

Organization: Huawei Technologies co.,Ltd.

Last Updated: 2012-05-04

Category: Domain: DSL, Protocol: STP, Vendor: Huawei

Description: Huawei IP-DSLAM MSTP MIB for managing Multiple Spanning Tree Protocol instances and port roles on Huawei IP DSLAM platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-IPDSLAM-MSTP-MIB?

HUAWEI-IPDSLAM-MSTP-MIB is a Huawei enterprise MIB for IP-DSLAM (DSL Access Multiplexer) platforms, defining objects to manage the Multiple Spanning Tree Protocol (MSTP), an enhancement over STP/RSTP that lets multiple VLANs share redundant paths for load-sharing while preventing loops. It exposes per-instance and per-port MSTP configuration and state, such as spanning-tree instance mappings, port roles, and topology parameters. Its monitoring value is centered on Layer 2 topology/software status: which MSTP instance a VLAN maps to, each port's spanning-tree role and state (root, designated, blocking, forwarding), and topology-change counts that reveal network instability or a physical loop. It is an extension of the IEEE 802.1s MSTP standard layered on Huawei's DSLAM system and bridge MIB framework, depending conceptually on the standard Bridge MIB model. It is deployed on Huawei IP-DSLAM access nodes in broadband access networks where multiple redundant uplinks must be load-shared and protected against loops. Engineers can download the HUAWEI-IPDSLAM-MSTP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-IPDSLAM-MSTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei IP-DSLAM access nodes

Monitoring Examples

No object names were captured for this module, so specific OIDs cannot be cited; based on the module description, an admin would typically poll per-port MSTP role and state (e.g., root/designated/blocking) and topology-change counters on the IP-DSLAM to detect an unstable spanning-tree topology or a port stuck in blocking state that should be forwarding.

What Can Be Monitored

MSTP instance-to-VLAN mapping
per-port spanning-tree role/state
topology change count
root bridge identification

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using hwMstpiStpRXStpBPDU OID:

Select a Huawei IP-DSLAM access node (Multiple Spanning Tree Protocol) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwMstpiStpRXStpBPDU into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Indicates the number of BPDUs received by the port. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwL2Mgmt	1.3.6.1.4.1.2011.5.25.42
hwMstp	1.3.6.1.4.1.2011.5.25.42.4			The mib is used for defining MIB objects of the multiple spanning tree protocol (MSTP). MSTP is an improvement of STP and RSTP. MSTP prevents the proliferation and infinite cycling of the packets in the loop network. In addition, MSTP provides multiple redundant paths for VLAN data transmission to achieve the load-sharing purpose. It supports MSTP loop network that helps meet various networking requirements.
I32 hwMstpAdminFormatSelector	1.3.6.1.4.1.2011.5.25.42.4.1.8	Integer32	read-only	Indicates the configuration ID format of a bridge.
I32 hwMstpAdminMstID	1.3.6.1.4.1.2011.5.25.42.4.1.18.1.2	Integer32	read-only	Indicates the configured MSTP region ID. Currently, the system supports only 17 instances, that is, instances 0-16. Range: 0-48
OCT hwMstpAdminRegionName	1.3.6.1.4.1.2011.5.25.42.4.1.9	OCTET STRING	read-write	Indicates the MSTP region name. The region name consists of up to 32 characters, and only letters (case sensitive), numerals, the hyphen (-), and the underline (_) are allowed.
I32 hwMstpAdminRevisionLevel	1.3.6.1.4.1.2011.5.25.42.4.1.10	Integer32	read-write	Indicates the revision level of an MSTP region name. Range: 0-65535 Default: 0
hwMstpAlarmTraps	1.3.6.1.4.1.2011.5.25.42.4.2.2
hwMstpAlarmTrapsPrefix	1.3.6.1.4.1.2011.5.25.42.4.2.2.0
HWM hwMstpBpduGuard	1.3.6.1.4.1.2011.5.25.42.4.1.7	HwMSTPEnabledStatus	read-write	Indicates whether a bridge is enabled with BPDU protection. Options: 1. enabled(1) -indicates BPDU protection of the bridge is enabled 2. disabled(2) -indicates BPDU protection of the bridge is disabled Default: disabled(2)
hwMstpBridgeInfoGroup	1.3.6.1.4.1.2011.5.25.42.4.3.1.1			A collection of objects indicating the necessary capabilites of the bridge device which is running the multi spanning tree protocol.
I32 hwMstpBridgeMaxHops	1.3.6.1.4.1.2011.5.25.42.4.1.4	Integer32	read-write	Indicates the maximum hop count of a region. Range: 1-40 Default: 20
hwMstpCommonTraps	1.3.6.1.4.1.2011.5.25.42.4.2.1
hwMstpCommonTrapsPrefix	1.3.6.1.4.1.2011.5.25.42.4.2.1.0
hwMstpCompliance	1.3.6.1.4.1.2011.5.25.42.4.3.2.1			The compliance statement for device support of Priority and Multicast Filtering extended bridging services.
hwMstpCompliances	1.3.6.1.4.1.2011.5.25.42.4.3.2
hwMstpConformance	1.3.6.1.4.1.2011.5.25.42.4.3
INT hwMstpDefaultRegionName	1.3.6.1.4.1.2011.5.25.42.4.1.16	INTEGER	read-write	Sets the default region name. Options: 1. reset(1) -indicates the default region name is used 2. unused(65535) -indicates the default region name is unused
INT hwMstpDefaultVlanAllo	1.3.6.1.4.1.2011.5.25.42.4.1.15	INTEGER	read-write	Sets the default mapping between VLANs and spanning trees. Options: 1. enable(1) -indicates the default mapping between VLANs and spanning trees is enabled 2. unused(65535) -indicates the default mapping between VLANs and spanning trees is unused
I32 hwMstpDiameter	1.3.6.1.4.1.2011.5.25.42.4.1.3	Integer32	read-write	Indicates the diameter of the current bridged network. Range: 2-7 Default: 7
INT hwMstpForceVersion	1.3.6.1.4.1.2011.5.25.42.4.1.2	INTEGER	read-write	Indicates the MSTP version of the current bridge. Options: 1. stp(0) -indicates the MSTP version of the current bridge is stp 2. rstp(2) -indicates the MSTP version of the current bridge is rstp 3. mstp(3) -indicates the MSTP version of the current bridge is mstp Default: mstp(3) rstp(2) is not supported.
hwMstpGroups	1.3.6.1.4.1.2011.5.25.42.4.3.1
OCT hwMstpiAdminMappedVlanListHigh	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.10	OCTET STRING	read-create	Used for setting the mapping between the last 2047 VLANs (VLAN 2048 to VLAN 4094) in a VLAN list and MSTIs. For example, if the vlan 2048 and vlan 4094 belongs to this instance, the hwMstpiAdminMappedVlanListHigh is # 80.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.02.
OCT hwMstpiAdminMappedVlanListLow	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.9	OCTET STRING	read-create	Used for setting the mapping between the first 2047 VLANs (VLAN 1 to VLAN 2047) in a VLAN list and MSTIs. For example, if the vlan 1 and vlan 2047 belongs to this instance, the hwMstpiAdminMappedVlanListLow is # 40.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.01.
I32 hwMstpiBridgeCurrentPriority	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.16	Integer32	read-only	Indicates the current priority of the bridge, including CIST and others. Range: 0-61440
OCT hwMstpiBridgeID	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.2	OCTET STRING	read-only	The Bridge Identifier for the spanning tree instance identified by MSTID. The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B). For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20, then the bridge ID is 80.00.00.EE.DC.F9.13.20.
I32 hwMstpiBridgePriority	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.3	Integer32	read-create	Indicates the primary priority of the CIST bridge, or priority of the bridge in others. Range: 0-61440 Default: 32768 Step: 4096
I32 hwMstpiBridgeSecondaryPriority	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.14	Integer32	read-create	Indicates the secondary priority of the CIST bridge. Only used by CIST. Range: 0-61440 Default: 61440 Step: 4096
I32 hwMstpiBridgeSecondaryPriorityBindPort	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.15	Integer32	read-create	Indicates the port which bound secondary priority of the CIST bridge in the region. Only used by CIST. Default: 0
OCT hwMstpiDesignatedBridge	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.7	OCTET STRING	read-only	Indicates the designated bridge. The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B). For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20, then the bridge ID is 80.00.00.EE.DC.F9.13.20.
I32 hwMstpiDesignatedCost	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.6	Integer32	read-only	Indicates the cost of the path from the port to the root bridge.
OCT hwMstpiDesignatedPort	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.8	OCTET STRING	read-only	Indicates the designated port. The format of the port ID is port priority (1B) + port number (1B). For example, if the port priority is 128, and the port number is 1, then the port ID is 80.01.
OCT hwMstpiDesignatedRoot	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.5	OCTET STRING	read-only	The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID. The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B). For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20, then the bridge ID is 80.00.00.EE.DC.F9.13.20.
OCT hwMstpiDesignedRoot	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.4	OCTET STRING	read-only	Indicates the master bridge ID of an MSTI in the region.
hwMstpInstanceEntry	1.3.6.1.4.1.2011.5.25.42.4.1.19.1		not-accessible	Indicates the instances extended by MSTP. The index of this entry is hwMstpInstanceID.
I32 hwMstpInstanceID	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.1	Integer32	not-accessible	It is an index and indicates the MSTI ID.
hwMstpInstanceInfoGroup	1.3.6.1.4.1.2011.5.25.42.4.3.1.3			A collection of objects describes the attribute of the instance in the multi spanning tree protocol.
hwMstpInstanceTable	1.3.6.1.4.1.2011.5.25.42.4.1.19		not-accessible	Indicates the instances extended by MSTP. The index of this table is hwMstpInstanceID.
OCT hwMstpiOperMappedVlanListHigh	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.12	OCTET STRING	read-only	Used for setting the mapping between the last 2047 VLANs (VLAN 2048 to VLAN 4094) in a VLAN list and MSTIs in actual running. For example, if the vlan 2048 and vlan 4094 belongs to this instance, the hwMstpiOperMappedVlanListHigh is # 80.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.02.
OCT hwMstpiOperMappedVlanListLow	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.11	OCTET STRING	read-only	Used for setting the mapping between the first 2047 VLANs (VLAN 1 to VLAN 2047) in a VLAN list and MSTIs in actual running. For example, if the vlan 1 and vlan 2047 belongs to this instance, the hwMstpiOperMappedVlanListLow is # 40.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.01.
NTF hwMstpiPortBpduGuarded	1.3.6.1.4.1.2011.5.25.42.4.2.1.0.5			The SNMP trap that is generated when an edged port of the BPDU-guard switch receives BPDU packets.
NTF hwMstpiPortBpduGuardedResume	1.3.6.1.4.1.2011.5.25.42.4.2.1.0.6			The SNMP trap that is generated when an edged port of the BPDU-guard switch not receives BPDU packets.
INT hwMstpiPortCompliance	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.26	INTEGER	read-write	Indicates the MSTP compliance type of the current port. Options: 1. auto(1) -indicates the MSTP compliance type of the current port is auto 2. dot1w(2) -indicates the MSTP compliance type of the current port is dot1w Default: auto(1).
NTF hwMstpiPortDisable	1.3.6.1.4.1.2011.5.25.42.4.2.1.0.7			The SNMP trap that is generated when a port disable stp.
I32 hwMstpiPortIndex	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.1	Integer32	not-accessible	It is an index and indicates a bridge port.
HWM hwMstpiPortLoopGuard	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.25	HwMSTPEnabledStatus	read-write	Indicates whether loop protection is enabled on the port. Options: 1. enabled(1) -indicates loop protection is enabled on the port 2. disabled(2) -indicates loop protection is disabled on the port Default: disabled(2)
I32 hwMstpiPortPathCost	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.4	Integer32	read-write	Indicates the path cost of the port. The value range of this leaf is relevant to hwMstpPathCostStandard. Range: 1-65535 (The 802.1d-1998 protocol is used as the computing standard) 1-200000000 (The 802.1t protocol is used as the computing standard) 1-200000 (Huawei's proprietary legacy is used as the computing standard)
I32 hwMstpiPortPriority	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.3	Integer32	read-write	Indicates the port priority. Range: 0-240 Default: 128 Step: 16
HWM hwMstpiPortRootGuard	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.24	HwMSTPEnabledStatus	read-write	Indicates whether root protection is enabled on the port. Options: 1. enabled(1) -indicates root protection is enabled on the port 2. disabled(2) -indicates root protection is disabled on the port Default: disabled(2)
NTF hwMstpiPortRootGuarded	1.3.6.1.4.1.2011.5.25.42.4.2.1.0.3			The SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance.
NTF hwMstpiPortRootGuardedResume	1.3.6.1.4.1.2011.5.25.42.4.2.1.0.4			The SNMP trap that is generated when a root-guard port not receives a superior message on the relevant instance.
INT hwMstpiPortState	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.2	INTEGER	read-only	Indicates the port status. Options: 1. disabled(1) -indicates the port is down 2. discarding(2) -indicates the port is discarding. During this phase, port can only receive and process BPDU data packet, not forward traffic, root bridge, root port, and specified port will be voted 3. learning(4) -indicates the port is learning. During this phase, bridge will create MAC address table according the received traffic, but not forward traffic 4. forwarding(5) -indicates traffic forward
NTF hwMstpiPortStateDiscarding	1.3.6.1.4.1.2011.5.25.42.4.2.1.0.2			The SNMP trap that is generated when a port turns into discarding state form forwarding state.
NTF hwMstpiPortStateForwarding	1.3.6.1.4.1.2011.5.25.42.4.2.1.0.1			The SNMP trap that is generated when a port turns into forwarding state form other state.
I32 hwMstpiRemainingHops	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.8	Integer32	read-only	Indicates the remaining hops of an MSTI in the region.
I32 hwMstpiRootPathCost	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.5	Integer32	read-only	Indicates the cost of the path from the BPDU-transmitting bridge to the root bridge.
I32 hwMstpiRootPort	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.6	Integer32	read-only	Indicates the root port of an MSTI in the region.
INT hwMstpiRootType	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.7	INTEGER	read-create	Indicates the type of the bridge. Options: 1. normal(0) -indicates the bridge is normal 2. secondary(1) -indicates the bridge is secondary 3. primary(2) -indicates the bridge is primary Default: normal(0)
ROW hwMstpiRowStatus	1.3.6.1.4.1.2011.5.25.42.4.1.19.1.13	RowStatus	read-create	Indicates the row status, which is the operation type of the table. Only option createAndGo(4) supports the set operation. In the query operation, the value of this leaf is always active(1). To create an MSTI, optionally input leaves hwMstpiBridgePriority, hwMstpiRootType, hwMstpiAdminMappedVlanListLow, and hwMstpiAdminMappedVlanListHigh, specify the value of hwMstpiRowStatus to createAndGo(4), and perform the set operation. To modify the values of other leaves, you can directly perform the set operation without setting and issuing the row status. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates creating an MSTI 3. destroy(6) -indicates deleting an MSTI
INT hwMstpiStpClearStatistics	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.21	INTEGER	read-write	Indicates whether to clear the statistics. Options: 1. clear(1) -indicates the statistics is cleared 2. unused(65535) -indicates the statistics is not cleared
INT hwMstpiStpDefaultPortCost	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.22	INTEGER	read-write	Indicates whether to restore the default port cost. Options: 1. reset(1) -indicates the default port cost is restored 2. unused(65535) -indicates the default port cost is not restored
INT hwMstpiStpMcheck	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.11	INTEGER	read-write	Indicates the mcheck parameter of the bridge port. Options: 1. enable(1) -indicates the mcheck parameter of the bridge port is enabled 2. unused(65535) -indicates the mcheck parameter of the bridge port is unused
HWM hwMstpiStpPortEdgeport	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.9	HwMSTPEnabledStatus	read-write	Indicates whether the current port is an edge port. Options: 1. enabled(1) -indicates the current port is an edge port 2. disabled(2) -indicates the current port is not an edge port Default: disabled(2)
INT hwMstpiStpPortPointToPoint	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.10	INTEGER	read-write	Indicates whether the current port is a point-to-point port. Options: 1. forceTrue(1) -indicates the current port is a point-to-point port 2. forceFalse(2) -indicates the current port is not a point-to-point port 3. auto(3) -indicates the current port is a self-negotiation port Default: auto(3)
C32 hwMstpiStpRXMSTPBPDU	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.19	Counter32	read-only	Indicates the number of MST BPDUs received by the port.
C32 hwMstpiStpRXRSTPBPDU	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.17	Counter32	read-only	Indicates the number of RST BPDUs received by the port.
C32 hwMstpiStpRXStpBPDUEx	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.13	Counter32	read-only	Indicates the number of BPDUs received by the port.
C32 hwMstpiStpRXTCNBPDU	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.15	Counter32	read-only	Indicates the number of TCN BPDUs received by the port.
HWM hwMstpiStpStatus	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.23	HwMSTPEnabledStatus	read-write	Indicates whether STP is enabled on the port. Options: 1. enabled(1) -indicates STP is enabled on the port 2. disabled(2) -indicates STP is not enabled on the port Default: enabled(1)
I32 hwMstpiStpTransLimit	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.12	Integer32	read-write	Indicates the maximum number of BPDUs that can be transmitted within the hello time. Range: 1-255 Default: 3
C32 hwMstpiStpTXMSTPBPDU	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.20	Counter32	read-only	Indicates the number of MST BPDUs transmitted by the port.
C32 hwMstpiStpTXRSTPBPDU	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.18	Counter32	read-only	Indicates the number of RST BPDUs transmitted by the port.
C32 hwMstpiStpTXStpBPDU	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.14	Counter32	read-only	Indicates the number of BPDUs transmitted by the port.
C32 hwMstpiStpTXTCNBPDU	1.3.6.1.4.1.2011.5.25.42.4.1.20.1.16	Counter32	read-only	Indicates the number of TCN BPDUs transmitted by the port.
OCT hwMstpMasterBridgeID	1.3.6.1.4.1.2011.5.25.42.4.1.5	OCTET STRING	read-only	Indicates the master bridge ID of an IST in an MSTP region. It is the root Bridge Identifier of the instance 0 in the region. The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B). For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20, then the bridge ID is 80.00.00.EE.DC.F9.13.20.
I32 hwMstpMasterPathCost	1.3.6.1.4.1.2011.5.25.42.4.1.6	Integer32	read-only	Indicates the external path cost. The value range of this leaf is relevant to hwMstpPathCostStandard. Range: 1-65535 (The 802.1d-1998 protocol is used as the computing standard) 1-200000000 (The 802.1t protocol is used as the computing standard) 1-200000 (Huawei's proprietary legacy is used as the computing standard)
OCT hwMstpMD5KEY	1.3.6.1.4.1.2011.5.25.42.4.1.22	OCTET STRING	read-write	Indicates the MD5 key used for generating the region configuration digest of the MSTP protocol. Default: 0x13AC06A62E47FD51F95D2BA243CD0346
hwMstpObjects	1.3.6.1.4.1.2011.5.25.42.4.1
I32 hwMstpOperFormatSelector	1.3.6.1.4.1.2011.5.25.42.4.1.11	Integer32	read-only	Indicates the configuration format of the region of a bridge in actual running.
I32 hwMstpOperMstID	1.3.6.1.4.1.2011.5.25.42.4.1.18.1.3	Integer32	read-only	Indicates the MSTP region ID in actual running. Currently, the system supports only 17 instances, that is, instances 0-16. Range: 0-48
OCT hwMstpOperRegionName	1.3.6.1.4.1.2011.5.25.42.4.1.12	OCTET STRING	read-only	Indicates the actually-used MSTP region name.
I32 hwMstpOperRevisionLevel	1.3.6.1.4.1.2011.5.25.42.4.1.13	Integer32	read-only	Indicates the revision level of the actually-used MSTP region name. Default: 0
INT hwMstpPathCostStandard	1.3.6.1.4.1.2011.5.25.42.4.1.17	INTEGER	read-write	Indicates the reference standard for path cost computation of a bridge. Options: 1. dot1d1998(1) -indicates dot1d1998 is the reference standard for path cost computation of a bridge 2. dot1t(2) -indicates dot1t is the reference standard for path cost computation of a bridge 3. legacy(3) -indicates legacy is the reference standard for path cost computation of a bridge Default: legacy(3)
hwMstpPortEntry	1.3.6.1.4.1.2011.5.25.42.4.1.20.1		not-accessible	Indicates the ports extended by MSTP. The indexes of this entry are hwMstpInstanceID and hwMstpiPortIndex.
hwMstpPortInfoGroup	1.3.6.1.4.1.2011.5.25.42.4.3.1.4			A collection of objects is necessary to show the information of the port in the bridge in the multi spanning tree protocol.
hwMstpPortTable	1.3.6.1.4.1.2011.5.25.42.4.1.20		not-accessible	Indicates the ports extended by MSTP. The indexes of this table are hwMstpInstanceID and hwMstpiPortIndex.
INT hwMstpRegionConfActive	1.3.6.1.4.1.2011.5.25.42.4.1.14	INTEGER	read-write	Indicates whether to activate the modified MSTP region configuration. Options: 1. enable (1) -when you need to activate the modified MSTP region configuration, use this value to perform the set operation. 2. disable(2) -the modified MSTP region configuration cannot be set to disable. When you perform the get operation to query the configuration, this value will be returned. This leaf supports only the set operation and it is recommended that you do not perform the get operation. If you perform the get operation, the value disable (2) will be returned.
HWM hwMstpStatus	1.3.6.1.4.1.2011.5.25.42.4.1.1	HwMSTPEnabledStatus	read-write	Indicates the status of the MSTP function of a bridge. Options: 1. enabled(1) -indicates the MSTP function of a bridge is enabled 2. disabled(2) -indicates the MSTP function of a bridge is disabled Default: disabled(2)
I32 hwMstpTimeFactor	1.3.6.1.4.1.2011.5.25.42.4.1.21	Integer32	read-write	Indicates the timeout factor of a bridge. Range: 1-10 Default: 3
hwMstpTraps	1.3.6.1.4.1.2011.5.25.42.4.2			Definition point for Mstp notifications.
I32 hwMstpVID	1.3.6.1.4.1.2011.5.25.42.4.1.18.1.1	Integer32	not-accessible	It is an index and indicates the VLAN ID. Range: 1-4094
hwMstpVIDAllocationEntry	1.3.6.1.4.1.2011.5.25.42.4.1.18.1		not-accessible	Indicates the mapping between VLANs and instances extended by MSTP. The index of this entry is hwMstpVID.
hwMstpVIDAllocationTable	1.3.6.1.4.1.2011.5.25.42.4.1.18		not-accessible	Indicates the mapping between VLANs and instances extended by MSTP. The index of this table is hwMstpVID.
hwMstpVlanInfoGroup	1.3.6.1.4.1.2011.5.25.42.4.3.1.2			A collection of objects describes the attribute of the vlan in the multi spanning tree protocol. They are necessary to find the relation between vlan and instance by the vlan identifier.

RFC description

Implements Multiple Spanning Tree Protocol (MSTP) for VLAN redundancy and loop prevention with load balancing.

Start monitoring Huawei IP-DSLAM access node (Multiple Spanning Tree Protocol) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-IPDSLAM-MSTP-MIB