HUAWEI-CPE-MGMT-MIB

All MIBs › HUAWEI-CPE-MGMT-MIB

Organization: Fix-Net Dep, Huawei Technologies Co.,Ltd.

Last Updated: 2006-02-23

Category: Domain: Subscriber Management, Vendor: Huawei

Description: Huawei CPE (Customer Premises Equipment) management MIB providing remote management objects for Huawei home gateways and DSL CPE devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-CPE-MGMT-MIB?

HUAWEI-CPE-MGMT-MIB is a Huawei proprietary MIB (Fix-Net division) managing CPE (Customer Premises Equipment) configuration from the access-network (DSLAM) side. Its objects, keyed by frame/slot/port, cover the CPE's IP address, ATM VPI/VCI, DSLAM-side and CPE-side VLAN IDs, and traffic-flow type/parameters. As a configuration MIB it lets an access-network operator confirm a subscriber's CPE addressing and VLAN mapping are correctly provisioned from the DSLAM side. It is deployed on Huawei DSLAM/access equipment managing broadband CPE. Engineers can download the HUAWEI-CPE-MGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-CPE-MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei DSLAM/access equipment managing broadband CPE

Monitoring Examples

An operator checks hwCpeMgmtDslamVlan against hwCpeMgmtCpeVlan for a subscriber's port to confirm the VLAN mapping between the DSLAM and CPE sides is consistent before troubleshooting a broadband service issue.

What Can Be Monitored

CPE IP/VPI/VCI and DSLAM-to-CPE VLAN mapping

Imported Objects

From HUAWEI-MIB

huaweiUtility

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwCpeMgmt	1.3.6.1.4.1.2011.6.106			huawei cpe management mib.
hwCpeMgmtPara	1.3.6.1.4.1.2011.6.106.1
IP hwCpeMgmtIpAddr	1.3.6.1.4.1.2011.6.106.1.1	IpAddress	read-write	IP address of CPE terminal. DSLAM uses this IP address to connect to CPE terminal.
INT hwCpeMgmtVpi	1.3.6.1.4.1.2011.6.106.1.2	INTEGER	read-write	VPI of terminal management channel. It is necessary to config VPI/VCI value when establish management channel.
INT hwCpeMgmtVci	1.3.6.1.4.1.2011.6.106.1.3	INTEGER	read-write	VCI of terminal management channel. It is necessary to config VPI/VCI value when establish management channel.
INT hwCpeMgmtDslamVlan	1.3.6.1.4.1.2011.6.106.1.4	INTEGER	read-write	VLAN ID of DSLAM's VLAN interface. It is necessary to config VLAN ID value when establish management channel.
INT hwCpeMgmtCpeVlan	1.3.6.1.4.1.2011.6.106.1.5	INTEGER	read-write	VLAN ID of VDSL CPE's management VLAN. It is necessary to config VLAN ID value when establish management channel.
INT hwCpeMgmtFlowType	1.3.6.1.4.1.2011.6.106.1.6	INTEGER	read-write	Flow type of VDSL CPE's management VLAN. 1 cpevlan 2 vlanethertype 3 vlan8021p
INT hwCpeMgmtFlowPara	1.3.6.1.4.1.2011.6.106.1.7	INTEGER	read-write	Flow parameter of VDSL CPE's management flow.
hwCpeSelect	1.3.6.1.4.1.2011.6.106.2
INT hwCpeFrameIndex	1.3.6.1.4.1.2011.6.106.2.1	INTEGER	read-write	Terminal's frame ID
INT hwCpeSlotIndex	1.3.6.1.4.1.2011.6.106.2.2	INTEGER	read-write	Terminal's slot ID
INT hwCpePortIndex	1.3.6.1.4.1.2011.6.106.2.3	INTEGER	read-write	Terminal's port ID
INT hwCpeMgmtOper	1.3.6.1.4.1.2011.6.106.2.4	INTEGER	read-write	Operation of terminal management: 1 - terminal management start 2 - terminal management end NMS starts telnet to CPE terminal from here. User only need Start operation if he want to telnet to CPE terminal. User need both Start operation and Stop operation if he want to update files to CPE terminal.
hwCpeUpgrade	1.3.6.1.4.1.2011.6.106.3
IP hwCpeLoadServerIpAddr	1.3.6.1.4.1.2011.6.106.3.1	IpAddress	read-write	Server IP address. DSLAM download files from this server.
INT hwCpeLoadProtocol	1.3.6.1.4.1.2011.6.106.3.2	INTEGER	read-write	Load protocol: 1 - TFTP mode 2 - FTP mode 3 - SFTP mode 4 - Other mode User can choose TFTP,FTP or SFTP mode to transfer files. The third transfer mode is used to extend.
OCT hwCpeLoadFileName	1.3.6.1.4.1.2011.6.106.3.3	OCTET STRING	read-write	Name of file to be loaded. Absolute path is needed if the file is not in the default path of FTP/TFTP server.
OCT hwCpeLoadUserName	1.3.6.1.4.1.2011.6.106.3.4	OCTET STRING	read-write	User name,use to visit FTP server. User name is not needed if TFTP protocol is used. This value will be discarded if TFTP protocol is used.
OCT hwCpeLoadPassword	1.3.6.1.4.1.2011.6.106.3.5	OCTET STRING	read-write	Password,use to visit FTP server. Password is not needed if TFTP protocol is used. This value will be discarded if TFTP protocol is used.
INT hwCpeLoadAdminStatus	1.3.6.1.4.1.2011.6.106.3.6	INTEGER	read-write	Load operation 1 - Start loading operation 2 - Stop loading operation NMS start update files from here.
INT hwCpeLoadOperStatus	1.3.6.1.4.1.2011.6.106.3.7	INTEGER	read-only	Load result: 1 - No load operation 2 - Wait to load 3 - Geting to dslam 4 - Putting to cpe 5 - Get to dslam fail 6 - Put to cpe fail DSLAM return loading result to NMS by this node.
INT hwCpeLoadFileType	1.3.6.1.4.1.2011.6.106.3.8	INTEGER	read-write	File Type: 1 - software of CPE 2 - configuration file 3 - other file
INT hwCpeLoadServerPort	1.3.6.1.4.1.2011.6.106.3.9	INTEGER	read-write	Cpe load server port in SFTP mode Default: 22
hwBatchCpeSelectTable	1.3.6.1.4.1.2011.6.106.4		not-accessible	Cpe Batch Management Table(the max record number is 1024)
hwBatchCpeSelectEntry	1.3.6.1.4.1.2011.6.106.4.1		not-accessible	Cpe Batch Management Table Entity
INT hwBatchCpeFrameIndex	1.3.6.1.4.1.2011.6.106.4.1.1	INTEGER	not-accessible	Terminal's frame ID
INT hwBatchCpeSlotIndex	1.3.6.1.4.1.2011.6.106.4.1.2	INTEGER	not-accessible	Terminal's slot ID
INT hwBatchCpePortIndex	1.3.6.1.4.1.2011.6.106.4.1.3	INTEGER	not-accessible	Terminal's port ID
INT hwBatchCpeid	1.3.6.1.4.1.2011.6.106.4.1.4	INTEGER	not-accessible	Terminal's ID
INT hwBatchCpeAdminStatus	1.3.6.1.4.1.2011.6.106.4.1.5	INTEGER	read-only	Terminal's current loading status Load result: 1 - prepare to load 2 - loading 3 - loadsuccess 4 - loadfail DSLAM return loading result to NMS by this node.
INT hwBatchCpeRowStatus	1.3.6.1.4.1.2011.6.106.4.1.6	INTEGER	read-write	Operation of terminal management:
INT hwBatchCpeLoadProgress	1.3.6.1.4.1.2011.6.106.4.1.7	INTEGER	read-only	display ont load progress

RFC description

Huawei CPE management MIB for DSLAM configuration and remote CPE terminal management over ATM.

Start monitoring Huawei DSLAM/access equipment managing broadband CPE with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-CPE-MGMT-MIB

What Is HUAWEI-CPE-MGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description