HUAWEI-IPPOOL-MIB

All MIBs › HUAWEI-IPPOOL-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2015-08-12

Category: Domain: Subscriber Management, Vendor: Huawei

Description: Huawei IP pool MIB for managing local IP address pools used for PPP/DHCP subscriber address assignment on Huawei access and service routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-IPPOOL-MIB?

HUAWEI-IPPOOL-MIB manages local IP address pools on Huawei access and service routers, used to allocate addresses to PPP and DHCP subscribers as they connect to broadband or enterprise access services. It exposes configuration objects for defining address pool ranges and status objects reporting pool utilization, such as how many addresses are allocated versus available. Its monitoring focus is on a critical software-managed resource: administrators track address pool exhaustion, since a pool running out of free addresses will cause new subscriber connections to fail, directly impacting service availability. It is a Huawei-private module with no direct dependency on an IETF standard, though it interacts conceptually with standard DHCP/PPP mechanisms. It is deployed on Huawei broadband remote access servers (BRAS) and service routers used by ISPs to manage subscriber address allocation at scale. Engineers can download the HUAWEI-IPPOOL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-IPPOOL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei broadband remote access servers (BRAS)
Huawei service routers

Monitoring Examples

An ISP's NMS would poll the IP pool utilization objects to track how many addresses remain free in a given pool as subscriber sessions come online, particularly during peak connection hours. If a pool's free-address count approaches zero, new PPPoE or DHCP subscribers in that pool's coverage area would start failing to obtain an address, directly causing service outages for new connections. No concrete sample object names were available in the source data for this MIB.

What Can Be Monitored

IP address pool allocation count
IP address pool free/available count
IP pool configuration/range

Imported Objects

From HUAWEI-MIB

huaweiUtility

OBJECT-IDENTITY

From IPV6-TC

Ipv6Address
Ipv6AddressIfIdentifier
Ipv6AddressPrefix

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwIppool	1.3.6.1.4.1.2011.6.8			The MIB contains objects of module IPPOOL.
hwIPPoolMibObjects	1.3.6.1.4.1.2011.6.8.1
hwIPPoolTable	1.3.6.1.4.1.2011.6.8.1.1		not-accessible	The configuration table of IP address pool.
hwIPPoolEntry	1.3.6.1.4.1.2011.6.8.1.1.1		not-accessible	The configuration list of IP address pool, which is used to configure the relevant attributes of the IP address pool inside the device.
I32 hwIPPoolIndex	1.3.6.1.4.1.2011.6.8.1.1.1.1	Integer32	read-only	Exclusive index of address pool.
STR hwIPPoolName	1.3.6.1.4.1.2011.6.8.1.1.1.2	DisplayString	read-create	IP address pool name, the service module guarantees the exclusiveness of the name.
IP hwIPPoolRouterIPAddr	1.3.6.1.4.1.2011.6.8.1.1.1.3	IpAddress	read-create	Gateway IP address. By default, the mask is 255.255.255.255.
IP hwIPPoolRouterIPMask	1.3.6.1.4.1.2011.6.8.1.1.1.4	IpAddress	read-create	Gateway mask. By default, the mask is 255.255.255.255.
IP hwIPPoolPriDNSIPAddr	1.3.6.1.4.1.2011.6.8.1.1.1.5	IpAddress	read-create	Primary DNS IP address. By default, it is 255.255.255.255.
IP hwIPPoolSecDNSIPAddr	1.3.6.1.4.1.2011.6.8.1.1.1.6	IpAddress	read-create	Second DNS IP address. By default, it is 255.255.255.255.
IP hwIPPoolPriNBNSIPAddr	1.3.6.1.4.1.2011.6.8.1.1.1.7	IpAddress	read-create	Primary Netbios IP address. By default, it is 255.255.255.255.
IP hwIPPoolSecNBNSIPAddr	1.3.6.1.4.1.2011.6.8.1.1.1.8	IpAddress	read-create	Second Netbios IP address. By default, it is 255.255.255.255.
I32 hwIPPoolIPAddrLease	1.3.6.1.4.1.2011.6.8.1.1.1.9	Integer32	read-create	IP address lease: 0~(10002460-1)(m) unit: minute. It is allowed not to specify the lease during the adding. The default value is 32460(m).
ROW hwIPPoolStatus	1.3.6.1.4.1.2011.6.8.1.1.1.10	RowStatus	read-create	Row admin status, either Add or Delete. Supports adding and deletion.
STR hwIPPoolVPNInstance	1.3.6.1.4.1.2011.6.8.1.1.1.11	DisplayString	read-create	IP VPN-instance name.
INT hwIPPoolType	1.3.6.1.4.1.2011.6.8.1.1.1.12	INTEGER	read-create	Value indicates the type of pool, 1-local, 2-relay, 3-server, 4-localRuiSlave.
IP hwIPPoolNetwork	1.3.6.1.4.1.2011.6.8.1.1.1.13	IpAddress	read-create	Network ip address of a DHCP Server global pool. To delete a configured network ip, please set hwDHCPSGlobalPoolConfigUndoFlag to 1
IP hwIPPoolNetworkMask	1.3.6.1.4.1.2011.6.8.1.1.1.14	IpAddress	read-create	Net mask of a DHCP Server global pool(network). The SET operation to this object ought to be with the SET of hwDHCPSGlobalPoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation. When a network ip of a DHCP server global pool was deleted, the net mask would also be deleted automatically, and no further operation needed
I32 hwIPPoolIPTotalNum	1.3.6.1.4.1.2011.6.8.1.1.1.15	Integer32	read-only	the number of total addresses.
I32 hwIPPoolIPUsedNum	1.3.6.1.4.1.2011.6.8.1.1.1.16	Integer32	read-only	the number of used addresses.
I32 hwIPPoolIPConflictNum	1.3.6.1.4.1.2011.6.8.1.1.1.17	Integer32	read-only	the number of conflict addresses.
I32 hwIPPoolIPExcludeNum	1.3.6.1.4.1.2011.6.8.1.1.1.18	Integer32	read-only	the number of exclude addresses.
I32 hwIPPoolIPIdleNum	1.3.6.1.4.1.2011.6.8.1.1.1.19	Integer32	read-only	the number of idle addresses.
I32 hwIPPoolIPUsedPercent	1.3.6.1.4.1.2011.6.8.1.1.1.20	Integer32	read-only	used percent.
OCT hwIPPoolDNSIPAddrString	1.3.6.1.4.1.2011.6.8.1.1.1.21	OCTET STRING	read-write	String of DNS server ip addresses for DHCP clients. Since mostly 8 ip addresses can be configured for a pool totally, a string is defined to get or configure 8 ip addresses at a time
OCT hwIPPoolDNSIPAddrStringUndo	1.3.6.1.4.1.2011.6.8.1.1.1.22	OCTET STRING	read-write	A DNS server ip address to be deleted. This object is only for deleting a given ip address of DNS server.
OCT hwIPPoolNBNSIPAddrString	1.3.6.1.4.1.2011.6.8.1.1.1.23	OCTET STRING	read-write	String of NetBIOS server ip addresses for DHCP clients. Since mostly 8 ip addresses can be configured for a pool totally, so a string is defined to get or configure 8 ip addresses at a time
OCT hwIPPoolNBNSIPAddrStringUndo	1.3.6.1.4.1.2011.6.8.1.1.1.24	OCTET STRING	read-write	A NetBIOS server ip address to delete. This object is only for deleting a given ip address of NetBIOS server
OCT hwIPPoolRouterUnnumberedIfName	1.3.6.1.4.1.2011.6.8.1.1.1.25	OCTET STRING	read-create	unnumbered interface name.
I32 hwIPPoolConflictAutoRecycleInterval	1.3.6.1.4.1.2011.6.8.1.1.1.26	Integer32	read-create	The flag indicates whether funtion of conflict auto recycle is enabled.
IP hwIPPoolLowAddr	1.3.6.1.4.1.2011.6.8.1.1.1.27	IpAddress	read-only	The lowest IP address in the pool.
IP hwIPPoolHighAddr	1.3.6.1.4.1.2011.6.8.1.1.1.28	IpAddress	read-only	The highest IP address in the pool.
I32 hwIPPoolReqNum	1.3.6.1.4.1.2011.6.8.1.1.1.29	Integer32	read-only	The number of the request packet.
I32 hwIPPoolReqSucNum	1.3.6.1.4.1.2011.6.8.1.1.1.30	Integer32	read-only	The number of the effective request packet.
hwIPSectionTable	1.3.6.1.4.1.2011.6.8.1.2		not-accessible	The configuration table of IP section.
hwIPSectionEntry	1.3.6.1.4.1.2011.6.8.1.2.1		not-accessible	IPSection Entry. IP section configuration table, used to manage the IP address of user. There are at most eight address sections to each address pool. Its indexes are hwIPPoolIndex (from the external) and HwIPSectionIndex.
I32 hwIPSectionIndex	1.3.6.1.4.1.2011.6.8.1.2.1.1	Integer32	read-only	Index of address section.
STR hwIPSectionDesc	1.3.6.1.4.1.2011.6.8.1.2.1.2	DisplayString	read-create	IP section DESCRIPTION, which can be empty.
IP hwIPSectionLowAddr	1.3.6.1.4.1.2011.6.8.1.2.1.3	IpAddress	read-create	Start of address.
IP hwIPSectionHighAddr	1.3.6.1.4.1.2011.6.8.1.2.1.4	IpAddress	read-create	End of address.
I32 hwIPSectionLength	1.3.6.1.4.1.2011.6.8.1.2.1.5	Integer32	read-only	IP section's length.
I32 hwIPSectionUsedNum	1.3.6.1.4.1.2011.6.8.1.2.1.6	Integer32	read-only	The number of Used addresses.
I32 hwIPSectionConflict	1.3.6.1.4.1.2011.6.8.1.2.1.7	Integer32	read-only	The number of conflict addresses.
I32 hwIPSectionInvalid	1.3.6.1.4.1.2011.6.8.1.2.1.8	Integer32	read-only	The number of invalid addresses.
I32 hwIPSectionAvailableNum	1.3.6.1.4.1.2011.6.8.1.2.1.9	Integer32	read-only	The number of available addresses.
ROW hwIPSectionRowStatus	1.3.6.1.4.1.2011.6.8.1.2.1.10	RowStatus	read-create	Row admin status, either Add or Delete.
hwIPPoolExtTable	1.3.6.1.4.1.2011.6.8.1.3		not-accessible	Extend table of the local address pool. When IP addresses are allocated by the built-in DHCP servers, you need to configure the lease and option.
hwIPPoolExtEntry	1.3.6.1.4.1.2011.6.8.1.3.1		not-accessible	DESCRIPTION.
I32 hwIPPoolAvailableStatus	1.3.6.1.4.1.2011.6.8.1.3.1.1	Integer32	read-write	Whether the address is prohibited.
I32 hwIPDhcpOptionId1	1.3.6.1.4.1.2011.6.8.1.3.1.2	Integer32	read-write	Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier.
STR hwIPDhcpOption1	1.3.6.1.4.1.2011.6.8.1.3.1.3	DisplayString	read-write	Value of the option.
I32 hwIPDhcpOptionId2	1.3.6.1.4.1.2011.6.8.1.3.1.4	Integer32	read-write	Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier.
STR hwIPDhcpOption2	1.3.6.1.4.1.2011.6.8.1.3.1.5	DisplayString	read-write	Value of the option.
I32 hwIPDhcpOptionId3	1.3.6.1.4.1.2011.6.8.1.3.1.6	Integer32	read-write	Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier.
STR hwIPDhcpOption3	1.3.6.1.4.1.2011.6.8.1.3.1.7	DisplayString	read-write	Value of the option.
I32 hwIPDhcpOptionId4	1.3.6.1.4.1.2011.6.8.1.3.1.8	Integer32	read-write	Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier.
STR hwIPDhcpOption4	1.3.6.1.4.1.2011.6.8.1.3.1.9	DisplayString	read-write	Value of the option.
STR hwIPDnsSuffix	1.3.6.1.4.1.2011.6.8.1.3.1.10	DisplayString	read-write	DNS suffix, a string of 0-50 characters. If the value is 0, it indicates that the suffix is deleted.
I32 hwIPDhcpSvrIPRsv	1.3.6.1.4.1.2011.6.8.1.3.1.11	Integer32	read-write	mode of IP addresses reserving. 1 indicates leasing management, 2 indicates MAC binding, and other values are invalid.
I32 hwIPPoolIpAddrRenewal	1.3.6.1.4.1.2011.6.8.1.3.1.12	Integer32	read-create	ip address renewal: 0~(10002460-1)(m) unit: minute. It is allowed not to specify the renewal during the adding. The default value is 2160(m)
I32 hwIPPoolIpAddrRebinding	1.3.6.1.4.1.2011.6.8.1.3.1.13	Integer32	read-create	ip address rebinding: 0~(10002460-1)(m) unit: minute. It is allowed not to specify the renewal during the adding. The default value is 3780(m)
IP hwIPPoolSIPAddr1	1.3.6.1.4.1.2011.6.8.1.3.1.14	IpAddress	read-create	SIP Server IP address
IP hwIPPoolSIPAddr2	1.3.6.1.4.1.2011.6.8.1.3.1.15	IpAddress	read-create	SIP Server IP address
STR hwIPPoolSIPName1	1.3.6.1.4.1.2011.6.8.1.3.1.16	DisplayString	read-write	The name of SIP server. 0 indicates to delete the SIP server.
STR hwIPPoolSIPName2	1.3.6.1.4.1.2011.6.8.1.3.1.17	DisplayString	read-write	The name of SIP server. 0 indicates to delete the SIP server.
hwIPAddressStatusTable	1.3.6.1.4.1.2011.6.8.1.4		not-accessible	Address status table. It supports the query and setting of status of the local address pool. It does not support the query and setting of status of the remote address pool for the following reasons: 1. The status of the remote address pool cannot be set. 2. The remote and local address pools map different status tables, with different indexes. 3. The remote address pool is managed by the remote equipment, rather than the local equipment. The local equipment displays only the approximate status of the remote address pool.
hwIPAddressStatusEntry	1.3.6.1.4.1.2011.6.8.1.4.1		not-accessible	DESCRIPTION.
IP hwIPAddress	1.3.6.1.4.1.2011.6.8.1.4.1.1	IpAddress	read-only	IP address.
INT hwIPAddressStatus	1.3.6.1.4.1.2011.6.8.1.4.1.2	INTEGER	read-write	Status of the address.
STR hwPoolName	1.3.6.1.4.1.2011.6.8.1.4.1.3	DisplayString	read-only	IP address pool name.
hwDhcpSvrGroupTable	1.3.6.1.4.1.2011.6.8.1.5		not-accessible	Configuration table of the DHCP server group. To monitor the status of the remote DHCP server, you need to configure the local DHCP server. You can configure a maximum of 4094 DHCP server groups. Each server group consists of two DHCP servers. Select the server based on the server status.
hwDhcpSvrGroupEntry	1.3.6.1.4.1.2011.6.8.1.5.1		not-accessible	DESCRIPTION.
I32 hwIPPoolDhcpSvrGroupIndex	1.3.6.1.4.1.2011.6.8.1.5.1.1	Integer32	read-only	Index of a DHCP server group. When you create an address pool, the equipment adds the hwIPPoolDhcpSvrGroupIndex entry by default and sends it to the NMS.
STR hwIPPoolDhcpSvrGroupName	1.3.6.1.4.1.2011.6.8.1.5.1.2	DisplayString	read-create	Name of the DHCP server group.
IP hwIPDhcpSvrPriAddr	1.3.6.1.4.1.2011.6.8.1.5.1.3	IpAddress	read-write	Primary IP address of the DHCP server group.
IP hwIPDhcpSvrScdiAddr	1.3.6.1.4.1.2011.6.8.1.5.1.4	IpAddress	read-write	Secondary IP address of the DHCP server group.
INT hwIPDhcpSvrPriState	1.3.6.1.4.1.2011.6.8.1.5.1.5	INTEGER	read-only	Status of the primary DHCP server.
INT hwIPDhcpScdPriState	1.3.6.1.4.1.2011.6.8.1.5.1.6	INTEGER	read-only	Status of the secondary DHCP server.
T/F hwIPDhcpSvrAutoRelease	1.3.6.1.4.1.2011.6.8.1.5.1.7	TruthValue	read-write	Whether the server supports the Release packet.
I32 hwIPDhcpSvrRefCount	1.3.6.1.4.1.2011.6.8.1.5.1.8	Integer32	read-only	Number of times the server group is referenced.
ROW hwIPDhcpSvrRowStatus	1.3.6.1.4.1.2011.6.8.1.5.1.9	RowStatus	read-create	DHCP server row status.
STR hwIPDhcpSvrPriVpnInstance	1.3.6.1.4.1.2011.6.8.1.5.1.10	DisplayString	read-create	VPN instance of the primary DHCP server.
STR hwIPDhcpSvrScdVpnInstance	1.3.6.1.4.1.2011.6.8.1.5.1.11	DisplayString	read-create	VPN instance of the secondary DHCP server.
OCT hwIPDhcpSvrSouce	1.3.6.1.4.1.2011.6.8.1.5.1.12	OCTET STRING	read-create	DHCP source interface address.
hwRemotePoolTable	1.3.6.1.4.1.2011.6.8.1.6		not-accessible	Configuration table of the remote address pool. The remote address pool must be configured on the local equipment in the following cases: Users obtain IP addresses through the built-in DHCP client and need to renew the addresses. The equipment needs to record the IP addresses to be renewed. The equipment needs to report the routes of the users.
hwRemotePoolEntry	1.3.6.1.4.1.2011.6.8.1.6.1		not-accessible	DESCRIPTION.
I32 hwRemoteIPPoolIndex	1.3.6.1.4.1.2011.6.8.1.6.1.1	Integer32	read-only	Index of an address pool. When you create an address pool, the equipment adds the hwRemoteIPPoolIndex x entry by default and sends it the NMS.
STR hwRemoteIPPoolName	1.3.6.1.4.1.2011.6.8.1.6.1.2	DisplayString	read-create	Name of an address pool. The service module ensures that the name is unique.
IP hwRemoteIPPoolRouterIPAddr	1.3.6.1.4.1.2011.6.8.1.6.1.3	IpAddress	read-write	IP address of the gateway.
IP hwRemoteIPPoolRouterIPMask	1.3.6.1.4.1.2011.6.8.1.6.1.4	IpAddress	read-write	IP address mask.
I32 hwRemoteIPPoolDhcpSvrGroupID	1.3.6.1.4.1.2011.6.8.1.6.1.5	Integer32	read-write	Name of the associated DHCP server group.
INT hwRemoteIPPoolAvailableStatus	1.3.6.1.4.1.2011.6.8.1.6.1.6	INTEGER	read-write	Whether the address pool is locked, 0: locked, 1: not locked.
ROW hwRemoteIPPoolRowStatus	1.3.6.1.4.1.2011.6.8.1.6.1.7	RowStatus	read-create	Row status of IP pool.
IP hwRemoteIPPoolPriDNSIPAddress	1.3.6.1.4.1.2011.6.8.1.6.1.8	IpAddress	read-write	IP address of the active DNS server.
IP hwRemoteIPPoolSecDNSIPAddress	1.3.6.1.4.1.2011.6.8.1.6.1.9	IpAddress	read-write	IP address of the standby DNS server.
IP hwRemoteIPPoolPriNBNSIPAddress	1.3.6.1.4.1.2011.6.8.1.6.1.10	IpAddress	read-write	IP address of the active NBNS server.
IP hwRemoteIPPoolSecNBNSIPAddress	1.3.6.1.4.1.2011.6.8.1.6.1.11	IpAddress	read-write	IP address of the standby NBNS server.
STR hwRemoteIPPoolVPNInstance	1.3.6.1.4.1.2011.6.8.1.6.1.12	DisplayString	read-write	IP VPN-instance name.
STR hwRemoteIPPoolDhcpGroupName	1.3.6.1.4.1.2011.6.8.1.6.1.13	DisplayString	read-only	DHCP server group name.
INT hwRemoteIPPoolLeaseManageEnable	1.3.6.1.4.1.2011.6.8.1.6.1.14	INTEGER	read-write	Whether the address pool lease manage is enable, 0: diable, 1: enable.
I32 hwRemoteIPPoolWeight	1.3.6.1.4.1.2011.6.8.1.6.1.15	Integer32	read-write	The weight of this Remote IP pool.
hwIPPoolStatistic	1.3.6.1.4.1.2011.6.8.1.7
I32 hwIPPoolNum	1.3.6.1.4.1.2011.6.8.1.7.1	Integer32	read-only	Number of configured addresses pools.
I32 hwIPIdleTotalNum	1.3.6.1.4.1.2011.6.8.1.7.2	Integer32	read-only	Number of idle addresses on the equipment.
I32 hwIPUsedTotalNum	1.3.6.1.4.1.2011.6.8.1.7.3	Integer32	read-only	Number of addresses in use on the equipment.
I32 hwIPConflictTotalNum	1.3.6.1.4.1.2011.6.8.1.7.4	Integer32	read-only	Number of conflicting addresses on the equipment.
I32 hwIPExcludeTotalNum	1.3.6.1.4.1.2011.6.8.1.7.5	Integer32	read-only	Number of excluded addresses on the equipment.
I32 hwIPTotalNum	1.3.6.1.4.1.2011.6.8.1.7.6	Integer32	read-only	The total number of IP address.
I32 hwIPUsedPercent	1.3.6.1.4.1.2011.6.8.1.7.7	Integer32	read-only	The percent of used IP address.
hwDhcpServerTable	1.3.6.1.4.1.2011.6.8.1.8		not-accessible	DHCP server configuration table.
hwDhcpServerEntry	1.3.6.1.4.1.2011.6.8.1.8.1		not-accessible	Description.
I32 hwDhcpServerIndex	1.3.6.1.4.1.2011.6.8.1.8.1.1	Integer32	read-only	The index of DHCP server.
IP hwIPPoolDhcpServerIP	1.3.6.1.4.1.2011.6.8.1.8.1.2	IpAddress	read-only	The IP address of DHCP server.
OCT hwIPPoolDhcpServerVRFName	1.3.6.1.4.1.2011.6.8.1.8.1.3	OCTET STRING	read-only	The name of VPN instance for the master DHCP server.
INT hwIPPoolDhcpServerState	1.3.6.1.4.1.2011.6.8.1.8.1.4	INTEGER	read-only	The state of DHCP server.
I32 hwIPPoolDhcpServerSendDisvSpdNum	1.3.6.1.4.1.2011.6.8.1.8.1.5	Integer32	read-write	The send discovering speed number.
I32 hwIPPoolDhcpServerSendDisvSpdSec	1.3.6.1.4.1.2011.6.8.1.8.1.6	Integer32	read-write	The interval of discovery packets sent by DHCP server.
I32 hwIPPoolDhcpServerDeadCount	1.3.6.1.4.1.2011.6.8.1.8.1.7	Integer32	read-write	The threshold of no response packets from DHCP server, when the number count over the threshold, DHCP server is changed from up to down status. The default value is 1.
I32 hwIPPoolDhcpServerNakCount	1.3.6.1.4.1.2011.6.8.1.8.1.8	Integer32	read-write	The threshold of nak packets from DHCP server, when nak packets count over the threshold, DHCP server is changed from up to down status. The default value is 10.
I32 hwIPPoolDhcpServerTimeout	1.3.6.1.4.1.2011.6.8.1.8.1.9	Integer32	read-write	The timeout interval for response packet,the time unit is second and default value is 25 seconds.
I32 hwIPPoolDhcpServerDeadTime	1.3.6.1.4.1.2011.6.8.1.8.1.10	Integer32	read-write	The interval of DHCP server automatically recover up status, the time unit is minute and default value is 3 minutes.
hwIPPoolOptionTable	1.3.6.1.4.1.2011.6.8.1.9		not-accessible	A table for configuring options to DHCP server pools, include option code type and value and so on .
hwIPPoolOptionEntry	1.3.6.1.4.1.2011.6.8.1.9.1		not-accessible	DESCRIPTION.
I32 hwIPDhcpOptionId	1.3.6.1.4.1.2011.6.8.1.9.1.1	Integer32	read-only	Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier.
OCT hwIPDhcpOption	1.3.6.1.4.1.2011.6.8.1.9.1.2	OCTET STRING	read-write	Value of the option.
ROW hwIPDhcpOptionRowStatus	1.3.6.1.4.1.2011.6.8.1.9.1.3	RowStatus	read-create	This object is used to configuration new rows in this table, modify existing rows, and to delete existing rows.Only three actions are used: active(1), createAndGo(4), destroy(6). while configuration new option, you must specify option type and value
hwIPPoolGroupTable	1.3.6.1.4.1.2011.6.8.1.10		not-accessible	Configuration table of the address Pool Group. IP Pool Group support an aggregation of IP Pools. Many Ip Pools of different gateway can be referenced by IP Pool Group. The max number of IP Pools referenced by an Ip Pool Group is 1024
hwIPPoolGroupEntry	1.3.6.1.4.1.2011.6.8.1.10.1		not-accessible	The configuration list of IP address pool group, which is used to configure the relevant attributes of the IP address pool group inside the device.
OCT hwIPPoolGroupName	1.3.6.1.4.1.2011.6.8.1.10.1.1	OCTET STRING	read-only	Name of an IP Pool Group.
OCT hwIPPoolGroupVPNInstance	1.3.6.1.4.1.2011.6.8.1.10.1.2	OCTET STRING	read-create	Vpn instance of an address Pool Group. Vpn instance of All IP Pools must accord with the vpn instance of IP Pool Group. Use string '--' to undo vpn instance in Pool Group.
T/F hwIPPoolGroupIncludeUndo	1.3.6.1.4.1.2011.6.8.1.10.1.3	TruthValue	read-create	Whether dereference all IP Pools in Pool Group. Only support dereference all IP Pools in this operation. If dereference Pool one by one is needed, please use IPPoolGroupExtTable.
ROW hwIPPoolGroupRowStatus	1.3.6.1.4.1.2011.6.8.1.10.1.4	RowStatus	read-create	Row status of IP Pool Group. Support Active, CreateAndGo and Destroy.
hwIPPoolGroupExtTable	1.3.6.1.4.1.2011.6.8.1.11		not-accessible	Configuration extension table of the address pool group. The extension table can set the order of an IP pool in IP Pool Group. The extension table can be used to dereference an IP pool in IP pool Group.
hwIPPoolGroupExtEntry	1.3.6.1.4.1.2011.6.8.1.11.1		not-accessible	The configuration list of IP address pool group extension table.
OCT hwIPPoolGroupExtIncludePoolName	1.3.6.1.4.1.2011.6.8.1.11.1.1	OCTET STRING	read-only	The IP Pool referenced in IP Pool Group.
I32 hwIPPoolGroupExtIncludePoolMoveOrder	1.3.6.1.4.1.2011.6.8.1.11.1.2	Integer32	read-create	The order of IP Pool in IP Pool Group. Specify the move order to adjust the order of the IP Pool in IP Pool Group. Only supoort set operation.
ROW hwIPPoolGroupExtRowStatus	1.3.6.1.4.1.2011.6.8.1.11.1.3	RowStatus	read-create	Row status of IP pool group extension. Support CreateAndGo and Destroy.
hwIPPoolGroupDisplayTable	1.3.6.1.4.1.2011.6.8.1.12		not-accessible	Display table of the address pool group.
hwIPPoolGroupDisplayEntry	1.3.6.1.4.1.2011.6.8.1.12.1		not-accessible	The configuration list of IP address pool display group table.
I32 hwIPPoolGroupIncludePoolNum	1.3.6.1.4.1.2011.6.8.1.12.1.1	Integer32	read-only	The number of IP Pools referenced in IP Pool Group.
I32 hwIPPoolGroupBoundByDomainNum	1.3.6.1.4.1.2011.6.8.1.12.1.2	Integer32	read-only	The number of IP Pool Groups referenced in domains.
I32 hwIPPoolGroupIPTotalNum	1.3.6.1.4.1.2011.6.8.1.12.1.3	Integer32	read-only	The Total number of IP in IP Pool Group.
I32 hwIPPoolGroupIPUsedNum	1.3.6.1.4.1.2011.6.8.1.12.1.4	Integer32	read-only	The Used number of IP in IP Pool Group.
I32 hwIPPoolGroupIPConflictedNum	1.3.6.1.4.1.2011.6.8.1.12.1.5	Integer32	read-only	The Conflicted number of IP in IP Pool Group.
I32 hwIPPoolGroupIPDisableNum	1.3.6.1.4.1.2011.6.8.1.12.1.6	Integer32	read-only	The Disable number of IP in IP Pool Group.
I32 hwIPPoolGroupIPDesignatedNum	1.3.6.1.4.1.2011.6.8.1.12.1.7	Integer32	read-only	The Designated number of IP in IP Pool Group.
I32 hwIPPoolGroupIPFreeNum	1.3.6.1.4.1.2011.6.8.1.12.1.8	Integer32	read-only	The Free number of IP in IP Pool Group.
I32 hwIPPoolGroupIPUsedPercent	1.3.6.1.4.1.2011.6.8.1.12.1.9	Integer32	read-only	The Used Percent of IP in IP Pool Group.
hwIPPoolDomainSearchListTable	1.3.6.1.4.1.2011.6.8.1.13		not-accessible	Set the domain search list which is uesed to fill content of DHCP packet option 119. The option is passed from the DHCP Server to the DHCP Client to specify the domain search list used when resolving hostnames using DNS.
hwIPPoolDomainSearchListEntry	1.3.6.1.4.1.2011.6.8.1.13.1		not-accessible	The configuration list of IP address pool DomainSearchList table.
OCT hwIPPoolDomainSearchList	1.3.6.1.4.1.2011.6.8.1.13.1.1	OCTET STRING	read-only	The domain search list which is used to fill content of DHCP packet option 119.
ROW hwIPPoolDomainSearchListRowStatus	1.3.6.1.4.1.2011.6.8.1.13.1.2	RowStatus	read-create	Row status of IP pool DomainSearchList. Support CreateAndGo and Destroy.
hwIPPoolOptionExtTable	1.3.6.1.4.1.2011.6.8.1.14		not-accessible	A Ext table for configuring options to DHCP server pools, include option code type and value and so on .
hwIPPoolOptionExtEntry	1.3.6.1.4.1.2011.6.8.1.14.1		not-accessible	DESCRIPTION.
I32 hwIPDhcpOptionSubId	1.3.6.1.4.1.2011.6.8.1.14.1.1	Integer32	read-only	Sub Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier.
INT hwIPDhcpOptionSubType	1.3.6.1.4.1.2011.6.8.1.14.1.2	INTEGER	read-create	Value indicates the type of sub-option, 1-ip, 2-string.
OCT hwIPDhcpOptionSubValue	1.3.6.1.4.1.2011.6.8.1.14.1.3	OCTET STRING	read-create	Value of the sub-option.
ROW hwIPDhcpOptionSubRowStatus	1.3.6.1.4.1.2011.6.8.1.14.1.50	RowStatus	read-create	This object is used to configuration new rows in this table, modify existing rows, and to delete existing rows.Only three actions are used: active(1), createAndGo(4), destroy(6). while configuration new suboption, you must specify suboption type and value
hwIPPoolReplyOptionTable	1.3.6.1.4.1.2011.6.8.1.15		not-accessible	A table for configuring options which will be replied to client in according to specified option value of DHCP client request
hwIPPoolReplyOptionEntry	1.3.6.1.4.1.2011.6.8.1.15.1		not-accessible	DESCRIPTION.
I32 hwIPDhcpSpecOptionId	1.3.6.1.4.1.2011.6.8.1.15.1.1	Integer32	read-only	Option ID. Option code from DHCP request of client.
OCT hwIPDhcpSpecOption	1.3.6.1.4.1.2011.6.8.1.15.1.2	OCTET STRING	read-only	Option ID. Option code from DHCP request of client.
I32 hwIPDhcpReplyOptionId	1.3.6.1.4.1.2011.6.8.1.15.1.3	Integer32	read-only	This object is used to configuration option code which is needed to reply to client according to specified option value in DHCP request, Option code, from 2 to 254, include 2 and 254, exclude 3,6,15,44,46,50-54,57-60,82
I32 hwIPDhcpReplyOptionSubId	1.3.6.1.4.1.2011.6.8.1.15.1.4	Integer32	read-only	Sub Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier.
INT hwIPDhcpReplyOptionSubType	1.3.6.1.4.1.2011.6.8.1.15.1.5	INTEGER	read-create	Value indicates the type of sub-option, 1-ip, 2-string, 3-hex.
OCT hwIPDhcpReplyOptionSub	1.3.6.1.4.1.2011.6.8.1.15.1.6	OCTET STRING	read-create	Value of the sub-option.
ROW hwIPDhcpReplyOptionRowStatus	1.3.6.1.4.1.2011.6.8.1.15.1.50	RowStatus	read-create	This object is used to configuration new rows in this table, modify existing rows, and to delete existing rows.Only three actions are used: active(1), createAndGo(4), destroy(6). while configuration new option, you must specify option type and value
hwIPv6PrefixTable	1.3.6.1.4.1.2011.6.8.1.16		not-accessible	The configuration table of IPv6 prefix pool.
hwIPv6PrefixEntry	1.3.6.1.4.1.2011.6.8.1.16.1		not-accessible	The configuration list of IPv6 prefix pool.
I32 hwIPv6PrefixIndex	1.3.6.1.4.1.2011.6.8.1.16.1.1	Integer32	read-only	The index of IPv6 prefix pool.
OCT hwIPv6PrefixName	1.3.6.1.4.1.2011.6.8.1.16.1.2	OCTET STRING	read-create	The name of IPv6 prefix pool
INT hwIPv6PrefixType	1.3.6.1.4.1.2011.6.8.1.16.1.3	INTEGER	read-create	The type of IPv6 prefix pool.
I32 hwIPv6PrefixDelegatingLen	1.3.6.1.4.1.2011.6.8.1.16.1.6	Integer32	read-create	The delegating prefix length of IPv6 prefix pool. Note that 0 is not a configurable value. This node is valid only for local and delegation prefix pool.
I32 hwIPv6PrefixAdvPreferredLifetime	1.3.6.1.4.1.2011.6.8.1.16.1.7	Integer32	read-create	The preferred lifetime(seconds) of IPv6 prefix pool.
I32 hwIPv6PrefixAdvValidLifetime	1.3.6.1.4.1.2011.6.8.1.16.1.8	Integer32	read-create	The valid lifetime(seconds) of the IPv6 prefix.
T/F hwIPv6PrefixAvailableStatus	1.3.6.1.4.1.2011.6.8.1.16.1.9	TruthValue	read-create	The flag indicating whether the IPv6 prefix pool is locked.
OCT hwIPv6VPNInstance	1.3.6.1.4.1.2011.6.8.1.16.1.10	OCTET STRING	read-create	The vpn instance name of the IPv6 prefix pool.
INT hwIPv6PrefixReservedFlag	1.3.6.1.4.1.2011.6.8.1.16.1.11	INTEGER	read-create	The reserved flag of the IPv6 prefix pool. 0-none reserved, 1-mac reserved, 2-mac plus lease reserved, 3-duid reserved, 4-duid plus lease reserved.
ADR hwIPv6LinkAddress	1.3.6.1.4.1.2011.6.8.1.16.1.12	Ipv6Address	read-create	The link address of the IPv6 remote prefix pool. This node is valid only for remote prefix pool.
T/F hwIPv6SlaacUnsharedFlag	1.3.6.1.4.1.2011.6.8.1.16.1.13	TruthValue	read-create	The flag indicates whether prefix pool is used in unshared-mode. The node is valid only for delegation prefix pool.
ROW hwIPv6PrefixRowStatus	1.3.6.1.4.1.2011.6.8.1.16.1.14	RowStatus	read-create	Row admin status. Support adding, modification and deletion.
T/F hwIPPoolPDUnshareOnly	1.3.6.1.4.1.2011.6.8.1.16.1.15	TruthValue	read-write	The flag indicates whether the prefix pool only for DHCPv6 IA_PD. The node is valid only for delegation prefix pool.
hwIPv6PoolTable	1.3.6.1.4.1.2011.6.8.1.17		not-accessible	The configuration table of IPv6 address pool.
hwIPv6PoolEntry	1.3.6.1.4.1.2011.6.8.1.17.1		not-accessible	The configuration list of IPv6 address pool.
I32 hwIPv6PoolIndex	1.3.6.1.4.1.2011.6.8.1.17.1.1	Integer32	read-only	The index of IPv6 addres pool.
OCT hwIPv6PoolName	1.3.6.1.4.1.2011.6.8.1.17.1.2	OCTET STRING	read-create	The name of IPv6 addres pool.
INT hwIPv6PoolType	1.3.6.1.4.1.2011.6.8.1.17.1.3	INTEGER	read-create	The type of IPv6 addres pool.
OCT hwIPv6PoolPrefixName	1.3.6.1.4.1.2011.6.8.1.17.1.4	OCTET STRING	read-create	The prefix pool name of IPv6 addres pool.
OCT hwIPv6PoolDnsIPAddr	1.3.6.1.4.1.2011.6.8.1.17.1.5	OCTET STRING	read-create	The DNS of IPv6 addres pool. The format to set value is : operator+space+primary DNS+space+secondary DNS. operator: 1-Add, 2-Delete.
OCT hwIPv6PoolDnsSearchList	1.3.6.1.4.1.2011.6.8.1.17.1.6	OCTET STRING	read-create	The DNS search list of IPv6 addres pool.
I32 hwIPv6PoolPreference	1.3.6.1.4.1.2011.6.8.1.17.1.7	Integer32	read-create	The preference of IPv6 addres pool.
T/F hwIPv6PoolAvailableStatus	1.3.6.1.4.1.2011.6.8.1.17.1.8	TruthValue	read-create	The flag indicating whether IPv6 address pool is locked.
I32 hwIPv6PoolRenewPercent	1.3.6.1.4.1.2011.6.8.1.17.1.9	Integer32	read-create	The renew time percent of IPv6 addres pool. When hwIPv6PoolRenewPercent is specified, you need also specify hwIPv6PoolRebindingPercent.
I32 hwIPv6PoolRebindingPercent	1.3.6.1.4.1.2011.6.8.1.17.1.10	Integer32	read-create	The rebinding time percent of IPv6 addres pool. When hwIPv6PoolRebindingPercent is specified, you need also specify hwIPv6PoolRenewPercent.
T/F hwIPv6PoolRapidCommitFlag	1.3.6.1.4.1.2011.6.8.1.17.1.11	TruthValue	read-create	The flag indicating whether DHCPv6 rapid-commit is enabled.
T/F hwIPv6PoolUnicastOption	1.3.6.1.4.1.2011.6.8.1.17.1.12	TruthValue	read-create	The flag indicating whether DHCPv6 server unicast option is enabled.
OCT hwIPv6PoolAFTRName	1.3.6.1.4.1.2011.6.8.1.17.1.13	OCTET STRING	read-create	Configure the name of Address Family Transition Router.
ROW hwIPv6PoolRowStatus	1.3.6.1.4.1.2011.6.8.1.17.1.14	RowStatus	read-create	Row admin status. Support adding, modification and deletion.
hwIPv6PoolStatusTable	1.3.6.1.4.1.2011.6.8.1.18		not-accessible	The configuration table of IPv6 address pool's usage.
hwIPv6PoolStatusEntry	1.3.6.1.4.1.2011.6.8.1.18.1		not-accessible	The configuration list of IPv6 address pool's usage.
I32 hwIPv6FreeAddressNum	1.3.6.1.4.1.2011.6.8.1.18.1.1	Integer32	read-only	The free address number of IPv6 addres pool.
I32 hwIPv6UsedAddressNum	1.3.6.1.4.1.2011.6.8.1.18.1.2	Integer32	read-only	The used address number of IPv6 addres pool.
I32 hwIPv6FreePrefixNum	1.3.6.1.4.1.2011.6.8.1.18.1.3	Integer32	read-only	The free prefix number of IPv6 addres pool.
I32 hwIPv6UsedPrefixNum	1.3.6.1.4.1.2011.6.8.1.18.1.4	Integer32	read-only	The used prefix number of IPv6 addres pool.
I32 hwIPv6AddressTotalNum	1.3.6.1.4.1.2011.6.8.1.18.1.5	Integer32	read-only	The total IPv6 address number of IPv6 address pool.
I32 hwIPv6AddressUsedNum	1.3.6.1.4.1.2011.6.8.1.18.1.6	Integer32	read-only	The used IPv6 address number of IPv6 address pool.
I32 hwIPv6AddressFreeNum	1.3.6.1.4.1.2011.6.8.1.18.1.7	Integer32	read-only	The free IPv6 address number of IPv6 address pool.
I32 hwIPv6AddressConflictNum	1.3.6.1.4.1.2011.6.8.1.18.1.8	Integer32	read-only	The conflict IPv6 address number of IPv6 address pool.
I32 hwIPv6AddressExcludeNum	1.3.6.1.4.1.2011.6.8.1.18.1.9	Integer32	read-only	The excluded IPv6 address number of IPv6 address pool.
I32 hwIPv6AddressUsedPercent	1.3.6.1.4.1.2011.6.8.1.18.1.10	Integer32	read-only	The percent of used IPv6 addressof IPv6 address pool.
I32 hwIPv6NDRAPrefixTotalNum	1.3.6.1.4.1.2011.6.8.1.18.1.11	Integer32	read-only	The total NDRA prefix number of IPv6 address pool.
I32 hwIPv6NDRAPrefixUsedNum	1.3.6.1.4.1.2011.6.8.1.18.1.12	Integer32	read-only	The used NDRA prefix number of IPv6 address pool.
I32 hwIPv6NDRAPrefixFreeNum	1.3.6.1.4.1.2011.6.8.1.18.1.13	Integer32	read-only	The free NDRA prefix number of IPv6 address pool.
I32 hwIPv6NDRAPrefixConflictNum	1.3.6.1.4.1.2011.6.8.1.18.1.14	Integer32	read-only	The conflict NDRA prefix number of IPv6 address pool.
I32 hwIPv6NDRAPrefixExcludeNum	1.3.6.1.4.1.2011.6.8.1.18.1.15	Integer32	read-only	The excluded NDRA prefix number of IPv6 address pool.
I32 hwIPv6NDRAPrefixUsedPercent	1.3.6.1.4.1.2011.6.8.1.18.1.16	Integer32	read-only	The percent of used IPv6 NDRA prefix of IPv6 address pool.
I32 hwIPv6PDPrefixTotalNum	1.3.6.1.4.1.2011.6.8.1.18.1.17	Integer32	read-only	The total PD prefix number of IPv6 address pool.
I32 hwIPv6PDPrefixUsedNum	1.3.6.1.4.1.2011.6.8.1.18.1.18	Integer32	read-only	The used PD prefix number of IPv6 address pool.
I32 hwIPv6PDPrefixFreeNum	1.3.6.1.4.1.2011.6.8.1.18.1.19	Integer32	read-only	The free PD prefix number of IPv6 address pool.
I32 hwIPv6PDPrefixConflictNum	1.3.6.1.4.1.2011.6.8.1.18.1.20	Integer32	read-only	The conflict PD prefix number of IPv6 address pool.
I32 hwIPv6PDPrefixExcludeNum	1.3.6.1.4.1.2011.6.8.1.18.1.21	Integer32	read-only	The excluded PD prefix number of IPv6 address pool.
I32 hwIPv6PDPrefixUsedPercent	1.3.6.1.4.1.2011.6.8.1.18.1.22	Integer32	read-only	The percent of used IPv6 PD prefix of IPv6 address pool.
hwIPv6DuidBindPrefixTable	1.3.6.1.4.1.2011.6.8.1.19		not-accessible	The binding of client DUID and prefix.
hwIPv6DuidBindPrefixEntry	1.3.6.1.4.1.2011.6.8.1.19.1		not-accessible	The binding of client's DUID and prefix.
OCT hwIPv6ClientDuid	1.3.6.1.4.1.2011.6.8.1.19.1.1	OCTET STRING	read-create	The client duid.
ADR hwIPv6BindPrefix	1.3.6.1.4.1.2011.6.8.1.19.1.2	Ipv6AddressPrefix	read-create	The binding prefix of client.
ROW hwIPv6DuidBindPrefixRowStatus	1.3.6.1.4.1.2011.6.8.1.19.1.3	RowStatus	read-create	Row admin status. Support adding and deletion.
hwDhcpv6SvrGroupTable	1.3.6.1.4.1.2011.6.8.1.20		not-accessible	The configuration table of the DHCPv6 server group.
hwDhcpv6SvrGroupEntry	1.3.6.1.4.1.2011.6.8.1.20.1		not-accessible	The configuration list of DHCPv6 server group.
I32 hwDhcpv6SvrGroupIndex	1.3.6.1.4.1.2011.6.8.1.20.1.1	Integer32	read-only	The index of DHCPv6 server group.
OCT hwDhcpv6SvrGroupName	1.3.6.1.4.1.2011.6.8.1.20.1.2	OCTET STRING	read-create	The name of DHCPv6 server group.
ADR hwIPDhcpv6SvrAddr1	1.3.6.1.4.1.2011.6.8.1.20.1.3	Ipv6Address	read-create	The primary DNS address.
ADR hwIPDhcpv6SvrAddr2	1.3.6.1.4.1.2011.6.8.1.20.1.4	Ipv6Address	read-create	The seconday DNS address.
INT hwIPDhcpv6PriSvrState	1.3.6.1.4.1.2011.6.8.1.20.1.5	INTEGER	read-only	The status of primary DNS.
INT hwIPDhcpv6ScdSvrState	1.3.6.1.4.1.2011.6.8.1.20.1.6	INTEGER	read-only	The status of secondary DNS.
T/F hwIPDhcpv6SvrAutoRelease	1.3.6.1.4.1.2011.6.8.1.20.1.7	TruthValue	read-create	The flag indicating whether server will automaticly send DHCPv6 release packet.
I32 hwIPDhcpv6SvrGroupRefCount	1.3.6.1.4.1.2011.6.8.1.20.1.8	Integer32	read-only	The referenced count of DHCPv6 server group.
STR hwDhcpv6SvrInterface1	1.3.6.1.4.1.2011.6.8.1.20.1.9	DisplayString	read-create	The outer interface of primary DHCPv6 server.
STR hwDhcpv6SvrInterface2	1.3.6.1.4.1.2011.6.8.1.20.1.10	DisplayString	read-create	The outer interface of secondary DHCPv6 server.
INT hwDhcpv6SvrAlgorithm	1.3.6.1.4.1.2011.6.8.1.20.1.11	INTEGER	read-create	The algorithm of selecting DHCPv6 server.
I32 hwDhcpv6SvrWeight1	1.3.6.1.4.1.2011.6.8.1.20.1.12	Integer32	read-create	The weight of primary DHCPv6 server.
I32 hwDhcpv6SvrWeight2	1.3.6.1.4.1.2011.6.8.1.20.1.13	Integer32	read-create	The weight of secondary DHCPv6 server.
OCT hwIPDhcpv6Svr1VrfName	1.3.6.1.4.1.2011.6.8.1.20.1.14	OCTET STRING	read-create	The vpn instance name of primary DHCPv6 server.
OCT hwIPDhcpv6Svr2VrfName	1.3.6.1.4.1.2011.6.8.1.20.1.15	OCTET STRING	read-create	The vpn instance name of secondary DHCPv6 server.
ROW hwDhcpv6SvrGroupRowStatus	1.3.6.1.4.1.2011.6.8.1.20.1.16	RowStatus	read-create	Row admin status. Support adding, modification and deletion.
OCT hwDhcpv6SvrSourceInterface	1.3.6.1.4.1.2011.6.8.1.20.1.17	OCTET STRING	read-create	The interface name whose IP address is the source IP address carried in the packets sent to the server.
hwIPv6RemotePoolTable	1.3.6.1.4.1.2011.6.8.1.21		not-accessible	The configuration table of IPv6 remote address pool.
hwIPv6RemotePoolEntry	1.3.6.1.4.1.2011.6.8.1.21.1		not-accessible	The configuration list of IPv6 remote address pool.
I32 hwIPv6RemotePoolIndex	1.3.6.1.4.1.2011.6.8.1.21.1.1	Integer32	read-only	The index of remote address pool.
OCT hwIPv6RemotePoolName	1.3.6.1.4.1.2011.6.8.1.21.1.2	OCTET STRING	read-create	The name of remote address pool.
OCT hwIPv6RemotePoolPrefixName	1.3.6.1.4.1.2011.6.8.1.21.1.3	OCTET STRING	read-create	The prefix pool name of remote address pool.
OCT hwIPv6RemotePoolDhcpv6SvrGroupName	1.3.6.1.4.1.2011.6.8.1.21.1.4	OCTET STRING	read-create	The DHCPv6 server group name of remote address pool.
T/F hwIPv6RemotePoolAvailableStatus	1.3.6.1.4.1.2011.6.8.1.21.1.5	TruthValue	read-create	The flag indicating whether remote address pool is locked.
T/F hwIPv6RemotePoolExportHostRouteFlag	1.3.6.1.4.1.2011.6.8.1.21.1.6	TruthValue	read-create	The flag indicating whether to export ipv6 host route.
ROW hwIPv6RemotePoolRowStatus	1.3.6.1.4.1.2011.6.8.1.21.1.7	RowStatus	read-create	Row admin status. Support adding, modification and deletion.
T/F hwIPv6RemotePoolExportHostRouteIPv6Address	1.3.6.1.4.1.2011.6.8.1.21.1.8	TruthValue	read-create	The flag indicating whether to export host's ipv6 address route .
T/F hwIPv6RemotePoolExportHostRoutePDPrefix	1.3.6.1.4.1.2011.6.8.1.21.1.9	TruthValue	read-create	The flag indicating whether to export host's pd prefix route.
T/F hwIPv6RemotePoolExportHostRouteNDPrefix	1.3.6.1.4.1.2011.6.8.1.21.1.10	TruthValue	read-create	The flag indicating whether to export host's nd prefix route.
I32 hwIPv6RemotePoolWeight	1.3.6.1.4.1.2011.6.8.1.21.1.11	Integer32	read-write	The weight of this Remote IPv6 pool.
hwIPv6PoolStatistic	1.3.6.1.4.1.2011.6.8.1.22
I32 hwIpv6PoolNum	1.3.6.1.4.1.2011.6.8.1.22.1	Integer32	read-only	Number of configured IPv6 address pools.
I32 hwIpv6AddressIdleTotalNum	1.3.6.1.4.1.2011.6.8.1.22.2	Integer32	read-only	Number of idle IPv6 addresses on the equipment.
I32 hwIpv6PrefixIdleTotalNum	1.3.6.1.4.1.2011.6.8.1.22.3	Integer32	read-only	Number of idle IPv6 prefixes on the equipment.
I32 hwIpv6AddressUsedTotalNum	1.3.6.1.4.1.2011.6.8.1.22.4	Integer32	read-only	Number of IPv6 addresses in use on the equipment.
I32 hwIpv6PrefixUsedTotalNum	1.3.6.1.4.1.2011.6.8.1.22.5	Integer32	read-only	Number of IPv6 prefixes in use on the equipment.
I32 hwAllIPv6AddressTotalNum	1.3.6.1.4.1.2011.6.8.1.22.6	Integer32	read-only	The total IPv6 address number.
I32 hwAllIPv6AddressUsedNum	1.3.6.1.4.1.2011.6.8.1.22.7	Integer32	read-only	The used IPv6 address number.
I32 hwAllIPv6AddressIdleNum	1.3.6.1.4.1.2011.6.8.1.22.8	Integer32	read-only	The free IPv6 address number.
I32 hwAllIPv6ConflictAddressNum	1.3.6.1.4.1.2011.6.8.1.22.9	Integer32	read-only	The conflict IPv6 address number.
I32 hwAllIPv6ExcludeAddressNum	1.3.6.1.4.1.2011.6.8.1.22.10	Integer32	read-only	The excluded IPv6 address number.
I32 hwAllIPv6AddressUsedPercent	1.3.6.1.4.1.2011.6.8.1.22.11	Integer32	read-only	The percent of used IPv6 address.
I32 hwAllNDRAPrefixTotalNum	1.3.6.1.4.1.2011.6.8.1.22.12	Integer32	read-only	The total NDRA prefix number.
I32 hwAllNDRAPrefixUsedNum	1.3.6.1.4.1.2011.6.8.1.22.13	Integer32	read-only	The used NDRA prefix number.
I32 hwAllNDRAPrefixFreeNum	1.3.6.1.4.1.2011.6.8.1.22.14	Integer32	read-only	The free NDRA prefix number.
I32 hwAllNDRAPrefixConflictNum	1.3.6.1.4.1.2011.6.8.1.22.15	Integer32	read-only	The conflict NDRA prefix number.
I32 hwAllNDRAPrefixExcludeNum	1.3.6.1.4.1.2011.6.8.1.22.16	Integer32	read-only	The excluded NDRA prefix number.
I32 hwAllNDRAPrefixUsedPercent	1.3.6.1.4.1.2011.6.8.1.22.17	Integer32	read-only	The percent of used IPv6 NDRA prefix.
I32 hwAllPDPrefixTotalNum	1.3.6.1.4.1.2011.6.8.1.22.18	Integer32	read-only	The total PD prefix number.
I32 hwAllPDPrefixUsedNum	1.3.6.1.4.1.2011.6.8.1.22.19	Integer32	read-only	The used PD prefix number.
I32 hwAllPDPrefixFreeNum	1.3.6.1.4.1.2011.6.8.1.22.20	Integer32	read-only	The free PD prefix number.
I32 hwAllPDPrefixConflictNum	1.3.6.1.4.1.2011.6.8.1.22.21	Integer32	read-only	The conflict PD prefix number.
I32 hwAllPDPrefixExcludeNum	1.3.6.1.4.1.2011.6.8.1.22.22	Integer32	read-only	The excluded PD prefix number.
I32 hwAllPDPrefixUsedPercent	1.3.6.1.4.1.2011.6.8.1.22.23	Integer32	read-only	The percent of used IPv6 PD prefix.
hwDhcpv6ServerTable	1.3.6.1.4.1.2011.6.8.1.23		not-accessible	DHCPv6 server configuration table.
hwDhcpv6ServerEntry	1.3.6.1.4.1.2011.6.8.1.23.1		not-accessible	The configuration of DHCPv6 server table.
I32 hwDhcpv6SvrIndex	1.3.6.1.4.1.2011.6.8.1.23.1.1	Integer32	read-only	The index of DHCPv6 server.
ADR hwDhcpv6ServerIP	1.3.6.1.4.1.2011.6.8.1.23.1.2	Ipv6Address	read-only	The IPv6 address of DHCPv6 server.
OCT hwDhcpv6ServerVRFName	1.3.6.1.4.1.2011.6.8.1.23.1.3	OCTET STRING	read-only	The name of VPN instance for the DHCPv6 server.
I32 hwDhcpv6ServerIfIndex	1.3.6.1.4.1.2011.6.8.1.23.1.4	Integer32	read-only	The IfIndex of DHCPv6 server.
INT hwDhcpv6ServerState	1.3.6.1.4.1.2011.6.8.1.23.1.5	INTEGER	read-only	The state of DHCPv6 server.
I32 hwDhcpv6ServerSendSolicitSpeedNum	1.3.6.1.4.1.2011.6.8.1.23.1.6	Integer32	read-write	The speed of sending solicit packet.
I32 hwDhcpv6ServerSendSolicitSpeedSec	1.3.6.1.4.1.2011.6.8.1.23.1.7	Integer32	read-write	The interval of solicit packets sent by DHCPv6 server.
hwIPV6AddressStatusTable	1.3.6.1.4.1.2011.6.8.1.24		not-accessible	A table for configuring the status of ipv6 address which in ipv6 local preifx
hwIPV6AddressStatusEntry	1.3.6.1.4.1.2011.6.8.1.24.1		not-accessible	DESCRIPTION.
ADR hwIPv6Address	1.3.6.1.4.1.2011.6.8.1.24.1.1	Ipv6Address	read-only	Ipv6Address.
INT hwIPv6AddressStatus	1.3.6.1.4.1.2011.6.8.1.24.1.2	INTEGER	read-write	Ipv6Address status: idle(0) occupied(1) prohibitive(2) conflictive(3). Status can set idle(0) when prohibitive(2) conflictive(3) reserved(7),set prohibitive(2) when idle(0).
STR hwIPv6LocalPrefixName	1.3.6.1.4.1.2011.6.8.1.24.1.3	DisplayString	read-only	Ipv6 Local prefix's name.
hwIPV6PrefixStatusTable	1.3.6.1.4.1.2011.6.8.1.25		not-accessible	A table for configuring the status of ipv6 prefix which in ipv6 delegation preifx
hwIPV6PrefixStatusEntry	1.3.6.1.4.1.2011.6.8.1.25.1		not-accessible	DESCRIPTION.
ADR hwIPv6Prefix	1.3.6.1.4.1.2011.6.8.1.25.1.1	Ipv6AddressPrefix	read-only	Ipv6Prefix.
I32 hwIPv6PrefixLen	1.3.6.1.4.1.2011.6.8.1.25.1.2	Integer32	read-only	Ipv6PrefixLength.
INT hwIPv6PrefixStatus	1.3.6.1.4.1.2011.6.8.1.25.1.3	INTEGER	read-write	Ipv6 Prefix status:idle(0) occupied(1) prohibitive(2) conflictive(3). Status can set idle(0) when prohibitive(2) conflictive(3) reserved(7),set prohibitive(2) when idle(0).
STR hwIPv6DelegationPrefixName	1.3.6.1.4.1.2011.6.8.1.25.1.4	DisplayString	read-only	Ipv6 Delegation prefix's name.
hwIPPoolConstantIndex	1.3.6.1.4.1.2011.6.8.1.26
I32 hwIPPoolConstantIndexEnable	1.3.6.1.4.1.2011.6.8.1.26.1	Integer32	read-write	Enable IP Pool Constant index function.
hwIPPoolSetting	1.3.6.1.4.1.2011.6.8.1.27
INT hwIPPoolAlgorithm	1.3.6.1.4.1.2011.6.8.1.27.1	INTEGER	read-write	The ipv4 remote pool algorithm.
INT hwIPv6PoolAlgorithm	1.3.6.1.4.1.2011.6.8.1.27.2	INTEGER	read-write	The ipv6 remote pool algorithm.
hwIPPoolMibTrap	1.3.6.1.4.1.2011.6.8.2
hwIPPoolTrapOid	1.3.6.1.4.1.2011.6.8.2.1
IP hwUserIPAddress	1.3.6.1.4.1.2011.6.8.2.1.1	IpAddress	accessible-for-notify	IP address of the user.
IP hwDHCPServerAddr	1.3.6.1.4.1.2011.6.8.2.1.2	IpAddress	accessible-for-notify	IP address of the DHCP server.
STR hwDhcpSvrVrfName	1.3.6.1.4.1.2011.6.8.2.1.3	DisplayString	accessible-for-notify	DHCP VPN instance name.
I32 hwIPPoolGroupIndex	1.3.6.1.4.1.2011.6.8.2.1.4	Integer32	accessible-for-notify	Exclusive index of IP pool group.
STR hwDhcpSvrDownReason	1.3.6.1.4.1.2011.6.8.2.1.5	DisplayString	accessible-for-notify	DHCP server down reason.
STR hwIPPoolDAPName	1.3.6.1.4.1.2011.6.8.2.1.7	DisplayString	accessible-for-notify	DAP name.
STR hwIPPoolDAPReason	1.3.6.1.4.1.2011.6.8.2.1.8	DisplayString	accessible-for-notify	Failure Cause of Address Segment Application.
hwIPPoolTrapsDefine	1.3.6.1.4.1.2011.6.8.2.2
hwIPPoolTraps	1.3.6.1.4.1.2011.6.8.2.2.0
NTF hwUserIPConflictAlarm	1.3.6.1.4.1.2011.6.8.2.2.0.1			1 Notice/Trap name: IP address conflict error. 2 Notice/Trap generation cause: user IP address conflict. 3 Repair suggestions: Check whether to renew configuring the BAS IP pool. Check whether the IP address of BAS interface conflicts user IP address.
NTF hwUserIPLeaseAlarm	1.3.6.1.4.1.2011.6.8.2.2.0.2			1 Notice/Trap name: IP address lease alarm. 2 Notice/Trap generation cause: The user IP lease is over. 3 Repair suggestion: Check whether to renew configuring BAS IP pool.
NTF hwAllocUserIPFailAlarm	1.3.6.1.4.1.2011.6.8.2.2.0.3			1 Notice/Trap name: allocate user IP fail alarm. 2 Notice/Trap generation cause: there are no enough IP addresses for users. 3 Repair suggestion: Check whether there are enough addresses in IP pool of the domain.
NTF hwDhcpServerDown	1.3.6.1.4.1.2011.6.8.2.2.0.4			Description: The DHCP server does not respond. This alarm is generated if the network is unstable, the DHCP server is Down, or there is not any available address in the DHCP server when a user applies for an address to the external DHCP server. Parameter: IP address of the DHCP server, address pool that the user expects (the address pool is identified by the gateway address because there may be multiple address pools on a server), VPN instance name, The reason of that DHCP server is set down status.
NTF hwLocalIPPoolDifferWithServer	1.3.6.1.4.1.2011.6.8.2.2.0.5			The configuration of the IP address pool on the DHCP server is not the same as the configuration of the remote address pool on the local equipment. Solution: Check whether the configuration of the IP address pool on the DHCP server, including the gateway address, mask, and the address range, is the same as the configuration of the remote address pool on the local equipment.
NTF hwUsedIPReachThreshold	1.3.6.1.4.1.2011.6.8.2.2.0.6			The number of used IP addresses in the pool exceeds the threshold. Repair suggestion: Check the configuration of the IP address pool.
NTF hwUsedIPReachThresholdResume	1.3.6.1.4.1.2011.6.8.2.2.0.7			The number of used IP addresses in the pool is under the threshold.
NTF hwUsedDeleteUnnumberedRouter	1.3.6.1.4.1.2011.6.8.2.2.0.8			The interface is unnumbered by the pool.
NTF hwPoolGroupUsedIPReachThreshold	1.3.6.1.4.1.2011.6.8.2.2.0.9			The number of used IP addresses in the IP pool group exceeds the threshold. Repair suggestion: Check the configuration of the IP address pool group.
NTF hwPoolGroupUsedIPReachThresholdResume	1.3.6.1.4.1.2011.6.8.2.2.0.10			The number of used IP addresses in the IP pool group is under the threshold.
NTF hwIPPoolConstantIndexFail	1.3.6.1.4.1.2011.6.8.2.2.0.11			The constance index of ip pool recover failure.
NTF hwIPv6PrefixConstantIndexFail	1.3.6.1.4.1.2011.6.8.2.2.0.12			The constance index of ipv6 prefix pool recover failure.
NTF hwIPv6PoolConstantIndexFail	1.3.6.1.4.1.2011.6.8.2.2.0.13			The constance index of ipv6 pool recover failure.
NTF hwUsedIPExhaust	1.3.6.1.4.1.2011.6.8.2.2.0.14			The number of IP addresses in the IP pool is exhausted.
NTF hwUsedIPExhaustResume	1.3.6.1.4.1.2011.6.8.2.2.0.15			The number of IP addresses in the IP pool is under the exhaust.
NTF hwPoolGroupUsedIPExhaust	1.3.6.1.4.1.2011.6.8.2.2.0.16			The number of IP addresses in the IP pool group is exhausted.
NTF hwPoolGroupUsedIPExhaustResume	1.3.6.1.4.1.2011.6.8.2.2.0.17			The number of IP addresses in the IP pool group is under the exhaust.
NTF hwUsedIPv6AddressAlarm	1.3.6.1.4.1.2011.6.8.2.2.0.18			The number of used IPv6 addresses in the pool exceeds the threshold. Repair suggestion: Check the configuration of the IP address pool.
NTF hwUsedIPv6AddressAlarmResume	1.3.6.1.4.1.2011.6.8.2.2.0.19			The number of used IPv6 addresses in the IP pool group is under the threshold.
NTF hwIPv6AddressExhaustAlarm	1.3.6.1.4.1.2011.6.8.2.2.0.20			The IPv6 addresses in the IPv6 pool is exhausted.
NTF hwIPv6AddressExhaustAlarmResume	1.3.6.1.4.1.2011.6.8.2.2.0.21			The IPv6 addresses exhausted alarm cleared.
NTF hwIPPoolDAPApplyUnsuccessful	1.3.6.1.4.1.2011.6.8.2.2.0.22			Fail to apply for the address segment.
NTF hwIPPoolDAPReleaseUnsuccessful	1.3.6.1.4.1.2011.6.8.2.2.0.23			Fail to release the address segment.
NTF hwIPPoolDAPSubnetFull	1.3.6.1.4.1.2011.6.8.2.2.0.24			The number of address segments dynamically allocated to the device reached the upper limit allowed by the dynamic address pool.
NTF hwIPPoolDAPDeviceSubnetFull	1.3.6.1.4.1.2011.6.8.2.2.0.25			The number of address segments dynamically allocated to the device reached the maximum number allowed.
hwIpPoolMIBConformance	1.3.6.1.4.1.2011.6.8.3
hwIpPoolCompliances	1.3.6.1.4.1.2011.6.8.3.1
hwIpPoolCompliance	1.3.6.1.4.1.2011.6.8.3.1.1			The compliance statement for systems supporting this module.
hwIpPoolObjectGroups	1.3.6.1.4.1.2011.6.8.3.2
hwIpPoolTableGroup	1.3.6.1.4.1.2011.6.8.3.2.1			The HUAWEI IP pool configuration group.
hwIpSectionTableGroup	1.3.6.1.4.1.2011.6.8.3.2.2			The HUAWEI IP section configuration group.
hwIpPoolExtTableGroup	1.3.6.1.4.1.2011.6.8.3.2.3			The HUAWEI IP pool extension configuration group.
hwIpAddressStatusTableGroup	1.3.6.1.4.1.2011.6.8.3.2.4			The HUAWEI IP address status configuration group.
hwDhcpSvrGroupTableGroup	1.3.6.1.4.1.2011.6.8.3.2.5			The HUAWEI DHCP service group configuration group.
hwRemotePoolTableGroup	1.3.6.1.4.1.2011.6.8.3.2.6			The HUAWEI remote pool configuration group.
hwIpPoolStatisticGroup	1.3.6.1.4.1.2011.6.8.3.2.7			The HUAWEI IP pool statistics group.
hwIpPoolTrapOidGroup	1.3.6.1.4.1.2011.6.8.3.2.8			The HUAWEI IP pool trap OID group.
hwIpPoolTrapsGroup	1.3.6.1.4.1.2011.6.8.3.2.9			The HUAWEI IP pool traps group.
hwDhcpServerTableGroup	1.3.6.1.4.1.2011.6.8.3.2.10			The HUAWEI IP pool DHCP server configure group.
hwIPPoolOptionTableGroup	1.3.6.1.4.1.2011.6.8.3.2.11			A table for configuring options to DHCP server pools, include option code type and value and so on .
hwIPPoolGroupTableGroup	1.3.6.1.4.1.2011.6.8.3.2.12			The HUAWEI Ip pool group configuration group.
hwIPPoolGroupExtTableGroup	1.3.6.1.4.1.2011.6.8.3.2.13			The HUAWEI Ip pool group extension configuration group.
hwIPPoolGroupDisplayTableGroup	1.3.6.1.4.1.2011.6.8.3.2.14			A table for displaying HUAWEI IP pool group.
hwIPPoolDomainSearchListGroup	1.3.6.1.4.1.2011.6.8.3.2.15			Set the domain search list name which is uesed to fill content of DHCP packet option 119.
hwIPPoolOptionExtTableGroup	1.3.6.1.4.1.2011.6.8.3.2.16			A table for configuring options to DHCP server pools, include suboption code type and value and so on .
hwIPPoolReplyOptionGroup	1.3.6.1.4.1.2011.6.8.3.2.17			Dhcp reply options which will be replied to client in according to specified option value of DHCP client request
hwIPv6PrefixTableGroup	1.3.6.1.4.1.2011.6.8.3.2.18			.
hwIPv6PoolTableGroup	1.3.6.1.4.1.2011.6.8.3.2.19			.
hwIPv6PoolStatusTableGroup	1.3.6.1.4.1.2011.6.8.3.2.20			.
hwIPv6DuidBindPrefixTableGroup	1.3.6.1.4.1.2011.6.8.3.2.21			.
hwDhcpv6SvrGroupTableGroup	1.3.6.1.4.1.2011.6.8.3.2.22			.
hwIPv6RemotePoolTableGroup	1.3.6.1.4.1.2011.6.8.3.2.23			.
hwIPv6PoolStatisticGroup	1.3.6.1.4.1.2011.6.8.3.2.24			The HUAWEI IPv6 pool statistics group.
hwIPV6AddressStatusTableGroup	1.3.6.1.4.1.2011.6.8.3.2.25			The HUAWEI IPv6 address status configuration group.
hwIPV6PrefixStatusTableGroup	1.3.6.1.4.1.2011.6.8.3.2.26			The HUAWEI IPv6 prefix status configuration group.
hwIPPoolConstantIndexGroup	1.3.6.1.4.1.2011.6.8.3.2.27			Enable IP Pool Constant index function.

RFC description

Manages IP address pool configurations for Huawei access and core devices. Supports IPv4/IPv6 pool allocation, DHCP, and DAP (Dynamic Address Pool).

Start monitoring Huawei broadband remote access server (BRAS) or service router (IP address pools) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-IPPOOL-MIB

What Is HUAWEI-IPPOOL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description