HUAWEI-FCOE-MIB

All MIBs › HUAWEI-FCOE-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2017-02-20

Category: Fibre Channel and Storage, Vendor: Huawei

Description: Huawei FCoE (Fibre Channel over Ethernet) MIB for managing FCoE forwarder nodes, VLANs, and FCoE initialization protocol sessions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-FCOE-MIB?

HUAWEI-FCOE-MIB is a vendor-specific MIB from Huawei covering Fibre Channel over Ethernet (FCoE) data center features, used to manage FCoE forwarder (FCF) nodes, FCoE VLANs, and FCoE Initialization Protocol (FIP) sessions that let Fibre Channel SAN traffic run over a converged Ethernet fabric. Without captured sample objects, its scope per the short description spans FCF node configuration, VLAN mapping for FCoE traffic, and FIP session state. Its monitoring relevance centers on the software/protocol status of the FCoE fabric -- verifying FCF nodes are operational, FCoE VLANs are correctly mapped, and FIP sessions between initiators and targets are established, which is essential for diagnosing storage connectivity issues in a converged network. It depends on the underlying Ethernet/VLAN infrastructure and Fibre Channel/FCoE standards (T11 FC-BB-5). It is deployed on Huawei data center switches that support FCoE for converged SAN/LAN fabrics. Engineers can download the HUAWEI-FCOE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-FCOE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei data center converged Ethernet/FCoE switch

Monitoring Examples

No sample objects were captured for this MIB; based on its stated purpose, an administrator would typically poll an FCF node table for operational status and a FIP session table to confirm an initiator has successfully logged in to the fabric via FIP, since a session stuck in a non-established state would indicate a VLAN mapping or FCF configuration problem preventing SAN traffic from reaching its target.

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

BITS
DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwFCoEMIB	1.3.6.1.4.1.2011.5.25.303			The MIB contains objects of DC FCOE features .
hwFCoEMIBTrapObjects	1.3.6.1.4.1.2011.5.25.303.1
OCT hwFCoEIfName	1.3.6.1.4.1.2011.5.25.303.1.1	OCTET STRING	accessible-for-notify	This FCoE interface name is sent from device.
I32 hwFCoEVlan	1.3.6.1.4.1.2011.5.25.303.1.2	Integer32	accessible-for-notify	This VLAN is sent from device.
I32 hwFCoEPortResource	1.3.6.1.4.1.2011.5.25.303.1.3	Integer32	accessible-for-notify	This FCoE port resource is reach max limit.
I32 hwTNPortVlan	1.3.6.1.4.1.2011.5.25.303.1.4	Integer32	accessible-for-notify	The detect vlan is different from the configued vlan.
I32 hwFCoEFcfVlan	1.3.6.1.4.1.2011.5.25.303.1.5	Integer32	accessible-for-notify	The Fcf vlan is different from the configued vlan.
I32 hwFCoEVFPortNum	1.3.6.1.4.1.2011.5.25.303.1.6	Integer32	accessible-for-notify	The FCoE VF Port number.
I32 hwFCoEVNPortNum	1.3.6.1.4.1.2011.5.25.303.1.7	Integer32	accessible-for-notify	The FCoE VN Port number.
OCT hwFCoEInstName	1.3.6.1.4.1.2011.5.25.303.1.8	OCTET STRING	accessible-for-notify	The FCoe instance name.
I32 hwSysMacNum	1.3.6.1.4.1.2011.5.25.303.1.9	Integer32	accessible-for-notify	The system mac-address number.
I32 hwFCoEVsId	1.3.6.1.4.1.2011.5.25.303.1.10	Integer32	accessible-for-notify	The Fcoe-port Index.
hwFCoEMIBTraps	1.3.6.1.4.1.2011.5.25.303.2
NTF hwFCoEPortLoseVlan	1.3.6.1.4.1.2011.5.25.303.2.1			When the device receives a FIP Notification packet,it gets VLANs from the packet, and compares with configuration at the inputing-port, if it's not same, exports warning.
NTF hwFCoEVLanError	1.3.6.1.4.1.2011.5.25.303.2.2			When the device receives a FIP Notification packet,it gets VLANs from the packet, and lookup at the configuration , if it's not exist, exports warning.
NTF hwFCoEConnectVfNum	1.3.6.1.4.1.2011.5.25.303.2.3			The number of vf-port has reached max limits 64.
NTF hwFCoELoginVnNum	1.3.6.1.4.1.2011.5.25.303.2.4			The number of online vn-ports has reached max limits 256.
NTF hwFCoETnNum	1.3.6.1.4.1.2011.5.25.303.2.5			The number of VN_Ports that belong to the same NPV instance exceeds the number of MAC addresses.
NTF hwFCoETnPortVlan	1.3.6.1.4.1.2011.5.25.303.2.6			The requested vlan is different from the configued NPV vlan.
hwFCoEConformance	1.3.6.1.4.1.2011.5.25.303.3
hwFCoECompliances	1.3.6.1.4.1.2011.5.25.303.3.1
hwFCoECompliance	1.3.6.1.4.1.2011.5.25.303.3.1.1			The compliance statement for SNMP entities which implement the HUAWEI-FCOE-MIB.
hwFCoEGroups	1.3.6.1.4.1.2011.5.25.303.3.2
hwFCoEMIBTrapObjectGroup	1.3.6.1.4.1.2011.5.25.303.3.2.1			Group for FCoE trap objects.
hwFCoEMIBTrapGroup	1.3.6.1.4.1.2011.5.25.303.3.2.2			Group for FCoE trap.
hwDcbPfcFrameGroup	1.3.6.1.4.1.2011.5.25.303.3.2.3			Group for dcb pfc frame statistics.
hwDcbPfcFrameStatisticsObjects	1.3.6.1.4.1.2011.5.25.303.4
hwDcbPfcFrameStatisticsTable	1.3.6.1.4.1.2011.5.25.303.4.1		not-accessible	A table of dcb pfc frame statistics for queue on the interface.
hwDcbPfcFrameStatisticsEntry	1.3.6.1.4.1.2011.5.25.303.4.1.1		not-accessible	dcb pfc frame statistics entry.
I32 hwDcbPfcIfIndex	1.3.6.1.4.1.2011.5.25.303.4.1.1.1	Integer32	read-only	The value of this object identifies the interface index.
HWC hwDcbPfcQueueID	1.3.6.1.4.1.2011.5.25.303.4.1.1.2	HWCosType	read-only	The value of this object identifies the queue index.
C64 hwDcbPfcRxFrames	1.3.6.1.4.1.2011.5.25.303.4.1.1.3	Counter64	read-only	This object indicates the number of pfc frames received by the queue.
C64 hwDcbPfcTxFrames	1.3.6.1.4.1.2011.5.25.303.4.1.1.4	Counter64	read-only	This object indicates the number of pfc frames sent by the queue.
HWR hwDcbPfcResetFlag	1.3.6.1.4.1.2011.5.25.303.4.1.1.5	HWResetFlag	read-write	Reset dcb pfc frame statistics information.

RFC description

Manages Fibre Channel over Ethernet (FCoE) for Huawei data center switches; vendor-private FCoE port and VLAN configuration.

Start monitoring Huawei data center converged Ethernet/FCoE switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-FCOE-MIB

What Is HUAWEI-FCOE-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description