-- ============================================================================
-- Copyright (C) 2006 by  HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description:  cpe management mib
-- Reference:
-- Version: V1.07
-- History:   
-- <wangyunshi>,<2008-4-28><v1.07 Add leave hwBatchCpeLoadProgress to table hwBatchCpeSelectTable.
-- wangyunshi  2008-04-20 Added
-- ============================================================================
	HUAWEI-CPE-MGMT-MIB DEFINITIONS ::= BEGIN

		IMPORTS

			Integer32, IpAddress, OBJECT-TYPE, MODULE-IDENTITY
				FROM SNMPv2-SMI
			huaweiUtility
				FROM HUAWEI-MIB	;

		hwCpeMgmt MODULE-IDENTITY
			LAST-UPDATED "0602231426Z"
			ORGANIZATION "Fix-Net Dep, Huawei Technologies Co.,Ltd."
			CONTACT-INFO
				"Huawei Longgang Production Base,
				Shenzhen,   P.R.C.
				http://www.huawei.com
				Zip:518129
				"
			DESCRIPTION
				"huawei cpe management mib."
			::= { huaweiUtility 106 }

		hwCpeMgmtPara  OBJECT IDENTIFIER ::= { hwCpeMgmt 1 }

		hwCpeMgmtIpAddr OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				IP address of CPE terminal.
				DSLAM uses this IP address to connect to CPE terminal.
				"
			DEFVAL { 3232235777 }
			::= { hwCpeMgmtPara 1 }

		hwCpeMgmtVpi OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				VPI of terminal management channel.
				It is necessary to config VPI/VCI value when establish management channel.
				"
			DEFVAL { 1 }
			::= { hwCpeMgmtPara 2 }

		hwCpeMgmtVci OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				VCI of terminal management channel.
				It is necessary to config VPI/VCI value when establish management channel.
				"
			DEFVAL { 39 }
			::= { hwCpeMgmtPara 3 }

		hwCpeMgmtDslamVlan OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				VLAN ID of DSLAM's VLAN interface.
				It is necessary to config VLAN ID value when establish management channel.
				"
			DEFVAL { 3999 }
			::= { hwCpeMgmtPara 4 }

		hwCpeMgmtCpeVlan OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				VLAN ID of VDSL CPE's management VLAN.
				It is necessary to config VLAN ID value when establish management channel.
				"
			DEFVAL { 4014 }
			::= { hwCpeMgmtPara 5 }

		hwCpeMgmtFlowType OBJECT-TYPE
			SYNTAX INTEGER {
				cpevlan(1),
				vlanethertype(2),
				vlan8021p(3)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Flow type of VDSL CPE's management VLAN.
				1 cpevlan
				2 vlanethertype
				3 vlan8021p
				"
			DEFVAL { 1 }
			::= { hwCpeMgmtPara 6 }

		hwCpeMgmtFlowPara OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Flow parameter of VDSL CPE's management flow.
			
				"
			::= { hwCpeMgmtPara 7 }

		hwCpeSelect OBJECT IDENTIFIER ::= { hwCpeMgmt 2 }

		hwCpeFrameIndex OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Terminal's frame ID
				"
			::= { hwCpeSelect 1 }

		hwCpeSlotIndex OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Terminal's slot ID
				"
			::= { hwCpeSelect 2 }

		hwCpePortIndex OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Terminal's port ID
				"
			::= { hwCpeSelect 3 }

		hwCpeMgmtOper OBJECT-TYPE
			SYNTAX INTEGER {
				start(1),
				stop(2)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Operation of terminal management:
				1 - terminal management start
				2 - terminal management end
				NMS starts telnet to CPE terminal from here.
				User only need Start operation if he want to telnet to CPE terminal.
				User need both Start operation and Stop operation if he want to update files to CPE terminal.
				"
			::= { hwCpeSelect 4 }

		hwCpeUpgrade OBJECT  IDENTIFIER   ::= { hwCpeMgmt 3 }

		hwCpeLoadServerIpAddr OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Server IP address.
				DSLAM download files from this server.
				"
			::= { hwCpeUpgrade 1 }

		hwCpeLoadProtocol OBJECT-TYPE
			SYNTAX INTEGER {
				tftp(1),
				ftp(2),
				sftp(3),
				other(4)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Load protocol:
				1 - TFTP mode
				2 - FTP mode
				3 - SFTP mode
				4 - Other mode
				User can choose TFTP,FTP or SFTP mode to transfer files.
				The third transfer mode is used to extend.
				"
			::= { hwCpeUpgrade 2 }

		hwCpeLoadFileName OBJECT-TYPE
			SYNTAX OCTET STRING
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Name of file to be loaded.
				Absolute path is needed if the file is not in the default path of FTP/TFTP server.
				"
			::= { hwCpeUpgrade 3 }

		hwCpeLoadUserName OBJECT-TYPE
			SYNTAX OCTET STRING
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				User name,use to visit FTP server.
				User name is not needed if TFTP protocol is used.
				This value will be discarded if TFTP protocol is used.
				"
			::= { hwCpeUpgrade 4 }

		hwCpeLoadPassword OBJECT-TYPE
			SYNTAX OCTET STRING
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Password,use to visit FTP server.
				Password is not needed if TFTP protocol is used.
				This value will be discarded if TFTP protocol is used.
				"
			::= { hwCpeUpgrade 5 }

		hwCpeLoadAdminStatus OBJECT-TYPE
			SYNTAX INTEGER {
				start(1),
				stop(2)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Load operation
				1 - Start loading operation
				2 - Stop loading operation
				NMS start update files from here.
				"
			::= { hwCpeUpgrade 6 }

		hwCpeLoadOperStatus OBJECT-TYPE
			SYNTAX INTEGER {
				noLoadOperation(1),
				ready(2),
				getingToDslam(3),
				puttingToCpe(4),
				getToDslamFail(5),
				putToCpeFail(6)
				}
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				Load result:
				1 - No load operation
				2 - Wait to load
				3 - Geting to dslam
				4 - Putting to cpe
				5 - Get to dslam fail
				6 - Put to cpe fail
				DSLAM return loading result to NMS by this node.
				"
			::= { hwCpeUpgrade 7 }

		hwCpeLoadFileType OBJECT-TYPE
			SYNTAX INTEGER {
				image(1),
				cfgfile(2),
				otherfile(3)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				File Type:
				1 - software of CPE
				2 - configuration file
				3 - other file

				"
			::= { hwCpeUpgrade 8 }

		hwCpeLoadServerPort OBJECT-TYPE
			SYNTAX INTEGER (0..65535)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Cpe load server port in SFTP mode
				Default: 22
				"
			DEFVAL { 22 }
			::= { hwCpeUpgrade 9 }

		hwBatchCpeSelectTable OBJECT-TYPE
			SYNTAX SEQUENCE OF HwBatchCpeSelectEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Cpe Batch Management Table(the max record number is 1024)"
			::= { hwCpeMgmt 4 }


		hwBatchCpeSelectEntry OBJECT-TYPE
			SYNTAX HwBatchCpeSelectEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Cpe Batch Management Table Entity"
			INDEX { hwBatchCpeFrameIndex,
	          		hwBatchCpeSlotIndex,
	          		hwBatchCpePortIndex,
	          		hwBatchCpeid
	          	   }
			::= { hwBatchCpeSelectTable 1 }

		HwBatchCpeSelectEntry ::=
			SEQUENCE {
				hwBatchCpeFrameIndex
					INTEGER,
				hwBatchCpeSlotIndex
					INTEGER,
				hwBatchCpePortIndex
					INTEGER,
				hwBatchCpeid
					INTEGER,
				hwBatchCpeAdminStatus
					INTEGER,
				hwBatchCpeRowStatus
					INTEGER,                     
				hwBatchCpeLoadProgress
					INTEGER
			 }

		hwBatchCpeFrameIndex OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				Terminal's frame ID


				"
			::= { hwBatchCpeSelectEntry 1 }

		hwBatchCpeSlotIndex OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				Terminal's slot ID


				"
			::= { hwBatchCpeSelectEntry 2 }

		hwBatchCpePortIndex OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				Terminal's port ID

				"
			::= { hwBatchCpeSelectEntry 3 }

		hwBatchCpeid OBJECT-TYPE
			SYNTAX INTEGER
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				Terminal's ID


				"
			::= { hwBatchCpeSelectEntry 4 }

		hwBatchCpeAdminStatus OBJECT-TYPE
			SYNTAX INTEGER {
				prepareToLoad(1),
				loading(2),
				loadsuccess(3),
				loadfail(4)
				}

			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				Terminal's current loading status


				Load result:
				1 - prepare to load
				2 - loading
				3 - loadsuccess
				4 - loadfail
				DSLAM return loading result to NMS by this node.


				"
			::= { hwBatchCpeSelectEntry 5 }

		hwBatchCpeRowStatus OBJECT-TYPE
			SYNTAX INTEGER {
				createAndGo(4),
				delete(6)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Operation of terminal management:



				"
			::= { hwBatchCpeSelectEntry 6 }
                                               
                                               
		hwBatchCpeLoadProgress OBJECT-TYPE
			SYNTAX INTEGER (0..100)
			MAX-ACCESS read-only
			STATUS current               
			DESCRIPTION
				"          
				
				display ont load progress   

				
				"  
			::= { hwBatchCpeSelectEntry 7 }

	END