HUAWEI-CCC-MIB

All MIBs › HUAWEI-CCC-MIB

Organization: Huawei Technologies Co., Ltd.

Last Updated: 2006-05-11

Category: MPLS and Traffic Engineering, Pseudowire, Vendor: Huawei

Description: Huawei CCC (Circuit Cross-Connect) MIB for managing Layer 2 circuit cross-connect services and point-to-point pseudowire connections.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-CCC-MIB?

HUAWEI-CCC-MIB is a Huawei private MIB for managing Circuit Cross-Connect (CCC) services, a mechanism for provisioning point-to-point Layer 2 pseudowire connections across an MPLS network (its description references KOMPELLA, an early BGP-based Layer 2 VPN signaling approach). It exposes objects for configuring and monitoring these Layer 2 cross-connect circuits between provider-edge devices. From a monitoring perspective, it would be used to confirm whether a given CCC/pseudowire circuit is up and correctly cross-connected, which is critical for detecting Layer 2 VPN service outages. This MIB depends on underlying MPLS and interface MIBs for the label-switched paths and physical/logical interfaces that CCC circuits ride over. It is deployed on Huawei provider-edge routers offering Layer 2 VPN (pseudowire) services in service-provider networks, and engineers can download the HUAWEI-CCC-MIB file to load into their MIB browser for reference.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-CCC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei provider-edge (PE) routers

Monitoring Examples

Without concrete object names captured for this MIB, a typical monitoring approach would poll a circuit/cross-connect table (analogous to standard PW-MIB or CCC-specific tables) keyed by circuit or VC ID, checking each entry's operational status to confirm the pseudowire between two provider-edge routers is up. An administrator would watch for a circuit unexpectedly transitioning to a down state, which indicates a break in the underlying MPLS LSP or a misconfigured cross-connect binding. This is used to verify point-to-point Layer 2 VPN service continuity across the core.

What Can Be Monitored

cross-connect circuit operational status
pseudowire/VC configuration
circuit binding to MPLS LSP

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From HUAWEI-VPLS-EXT-MIB

HWEnableValue
HWL2VpnStateChangeReason
HWL2VpnVcEncapsType

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwL2Vpn	1.3.6.1.4.1.2011.5.25.119
hwL2VpnCCC	1.3.6.1.4.1.2011.5.25.119.3			The HUAWEI-CCC-MIB contains objects to manage KOMPELLA.
hwCCCMIBObjects	1.3.6.1.4.1.2011.5.25.119.3.1
hwCCCVcTable	1.3.6.1.4.1.2011.5.25.119.3.1.1		not-accessible	This table is the CCC's configuration table. Users can create or delete the CCC by it.
hwCCCVcEntry	1.3.6.1.4.1.2011.5.25.119.3.1.1.1		not-accessible	Provides the information of a CCC entry.
STR hwCCCVcName	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.1	DisplayString	not-accessible	The human-readable name of this CCC.
INT hwCCCVcConnectionType	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.2	INTEGER	read-create	This object indicates the VC connection type.
HWL hwCCCVcEncapType	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.3	HWL2VpnVcEncapsType	read-create	This object indicates the service to be carried.
NUM hwCCCVcIfIndex	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.4	InterfaceIndexOrZero	read-create	This object indicates the AC ifIndex. 0 is invalid ifIndex.
U32 hwCCCVcInboundlabel	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.5	Unsigned32	read-create	This object indicates the static inbound label. This value need not be designated if the CCC is local.
U32 hwCCCVcOutboundlabel	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.6	Unsigned32	read-create	This object indicates the static outbound label. This value need not be designated if the CCC is local.
NUM hwCCCVcOutIfIndex	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.7	InterfaceIndexOrZero	read-create	This object indicates the ifIndex of the out interface in the side of PSN, or the ifIndex of the out interface in the side of AC if the CCC is local cross. 0 is invalid ifIndex.
IP hwCCCVcNextHop	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.8	IpAddress	read-create	This object indicates the next hop IP address of the out interface in the side of PSN. For the interface of ATM or FR or Ethernet, the next hop address must be used. Don't use the out interface in this case.
HWE hwCCCVcCtrlWord	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.9	HWEnableValue	read-create	This object indicates the control word capability. This value need not be designated if the CCC is local.
INT hwCCCVcOperStatus	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.10	INTEGER	read-only	This object indicates the operation status.
STR hwCCCVcUpStartTime	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.11	DisplayString	read-only	Specifies the time this VC status was Up(1).
U32 hwCCCVcUpSumTime	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.12	Unsigned32	read-only	Specifies the cumulate time this VC status has been Up(1).
U32 hwCCCVcMaxAtmCells	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.13	Unsigned32	read-create	Specifies the MaxAtmCells.
U32 hwCCCVcAtmPackOvertime	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.14	Unsigned32	read-create	Specifies the AtmPackOvertime.
U32 hwCCCVcPwJitterBufferDepth	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.15	Unsigned32	read-create	Specifies the PwJitterBufferDepth.
U32 hwCCCVcPwTdmEncapsulationNum	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.16	Unsigned32	read-create	Specifies the PwTdmEncapsulationNum.
U32 hwCCCVcPwIdleCode	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.17	Unsigned32	read-create	Specifies the PwIdleCode.
U32 hwCCCVcPwRtpHeader	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.18	Unsigned32	read-create	Specifies the PwRtpHeader.
HWE hwCCCVcIpInterworking	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.19	HWEnableValue	read-create	This object indicates the enable sign of the IP interworking.
ROW hwCCCVcRowStatus	1.3.6.1.4.1.2011.5.25.119.3.1.1.1.51	RowStatus	read-create	RowStatus for this Table.
hwCCCVcStatisticsTable	1.3.6.1.4.1.2011.5.25.119.3.1.2		not-accessible	This table contains the CCC's VC packets statistics.
hwCCCVcStatisticsEntry	1.3.6.1.4.1.2011.5.25.119.3.1.2.1		not-accessible	Provides the information of the CCC's VC packets Statistics.
NUM hwCCCVcStatisticsIfIndex	1.3.6.1.4.1.2011.5.25.119.3.1.2.1.1	InterfaceIndex	not-accessible	This object indicates the AC ifIndex. The CCC will have two AC which need to be displayed if the CCC is local cross.
C64 hwCCCVcStatisticsRcvPkts	1.3.6.1.4.1.2011.5.25.119.3.1.2.1.2	Counter64	read-only	The total number of packets received on this VC.
C64 hwCCCVcStatisticsRcvBytes	1.3.6.1.4.1.2011.5.25.119.3.1.2.1.3	Counter64	read-only	The total number of bytes received on this VC.
C64 hwCCCVcStatisticsSndPkts	1.3.6.1.4.1.2011.5.25.119.3.1.2.1.4	Counter64	read-only	The total number of packets sent on this VC.
C64 hwCCCVcStatisticsSndBytes	1.3.6.1.4.1.2011.5.25.119.3.1.2.1.5	Counter64	read-only	The total number of bytes sent on the VC.
HWE hwCCCVcUpDownNotifEnable	1.3.6.1.4.1.2011.5.25.119.3.1.3	HWEnableValue	read-write	This object indicates the enable sign of CCC VC state change notification.
HWE hwCCCVcDeletedNotifEnable	1.3.6.1.4.1.2011.5.25.119.3.1.4	HWEnableValue	read-write	This object indicates the enable sign of CCC VC deletion notification.
HWL hwCCCVcStateChangeReason	1.3.6.1.4.1.2011.5.25.119.3.1.5	HWL2VpnStateChangeReason	accessible-for-notify	This object indicates the reason of CCC VC state change.
hwCCCMIBTraps	1.3.6.1.4.1.2011.5.25.119.3.2
NTF hwCCCVcDown	1.3.6.1.4.1.2011.5.25.119.3.2.1			This notification indicates the VC's state changes to down.
NTF hwCCCVcUp	1.3.6.1.4.1.2011.5.25.119.3.2.2			This notification indicates the VC's state changes to up.
NTF hwCCCVcDeleted	1.3.6.1.4.1.2011.5.25.119.3.2.3			This notification indicates the VC is deleted.
hwCCCMIBConformance	1.3.6.1.4.1.2011.5.25.119.3.3
hwCCCMIBCompliances	1.3.6.1.4.1.2011.5.25.119.3.3.1
hwCCCMIBCompliance	1.3.6.1.4.1.2011.5.25.119.3.3.1.1			The compliance statement for systems supporting the HUAWEI-KOMPELLA-MIB.
hwCCCMIBGroups	1.3.6.1.4.1.2011.5.25.119.3.3.2
hwCCCVcGroup	1.3.6.1.4.1.2011.5.25.119.3.3.2.1			The CCC's VC group.
hwCCCVcStatisticsGroup	1.3.6.1.4.1.2011.5.25.119.3.3.2.2			The CCC's VC Statistics group.
hwCCCNotificationControlGroup	1.3.6.1.4.1.2011.5.25.119.3.3.2.3			The CCC's Notification Control group.
hwCCCVcStateChangeReasonGroup	1.3.6.1.4.1.2011.5.25.119.3.3.2.4			The CCC's Vc State Change Reason group.
hwCCCNotificationGroup	1.3.6.1.4.1.2011.5.25.119.3.3.2.5			The CCC Notification group.

RFC description

Manages Circuit Cross-Connection (CCC) virtual circuit configuration and KOMPELLA support.

Start monitoring Huawei routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-CCC-MIB

What Is HUAWEI-CCC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description