HUAWEI-LSW-DEV-ADM-MIB

All MIBs › HUAWEI-LSW-DEV-ADM-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2009-03-19

Category: Device Management, Vendor: Huawei

Description: Huawei LAN switch device administration MIB providing platform-specific configuration and status objects for Huawei enterprise LAN switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-LSW-DEV-ADM-MIB?

HUAWEI-LSW-DEV-ADM-MIB is a Huawei enterprise MIB that provides platform-specific device administration objects for Huawei's campus/enterprise LAN switch (LSW) product line. It exposes device-level configuration and administrative status data, covering aspects such as system configuration state, administrative control settings, and platform identification for the switch. Network management systems polling objects under the HUAWEI-LSW-DEV-ADM-MIB OID subtree use it to confirm administrative and configuration health of the switch, complementing standard hardware telemetry—uptime, CPU/memory load, and power/fan status—reported by companion Huawei system MIBs. It is registered under Huawei's enterprise SMI OID structure and is typically deployed alongside other Huawei LSW-series MIBs covering interfaces, VLANs, and environmental monitoring. It is used in enterprise and campus network environments running Huawei LAN switches that are managed via SNMP through Huawei's eSight or third-party network management platforms.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-LSW-DEV-ADM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei CloudEngine S5732-H (2024) — full-10GE access LAN switch, 24/48-port models

Monitoring Examples

No specific sample objects were provided for this module, so a concrete polling scenario cannot be built from real object names here. In practice, administrators would enumerate the scalars and tables registered under the Huawei enterprise OID tree for this MIB—typically covering configuration state, administrative mode, and version identification for the LAN switch—using a MIB browser or NMS to confirm the switch's administrative status. This module would ordinarily be polled alongside standard interface (IF-MIB) and system (MIB-II) objects to build a complete picture of switch health, since HUAWEI-LSW-DEV-ADM-MIB itself focuses narrowly on device administration rather than interface or environmental telemetry.

What Can Be Monitored

device administrative configuration status
system configuration state
administrative control settings
platform/version identification

Imported Objects

From HUAWEI-3COM-OID-MIB

lswCommon

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using hwLswSysCpuRatio OID:

Select a Huawei CloudEngine S5732-H (2024) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwLswSysCpuRatio into the Find box to locate it in the OID tree, then select it and click OK. This OID reports the switch's overall CPU utilization as a percentage (0-100). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if CPU utilization exceeds 85%, a common warning threshold before sustained high load affects switching performance. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwLswDeviceAdmin	1.3.6.1.4.1.2011.2.23.1.18			The latest baseline.
I32 hwLswFabricChannelIndex	1.3.6.1.4.1.2011.2.23.1.18.4.7.1.1	Integer32	not-accessible	The channel number of fabric.
hwLswFabricEntry	1.3.6.1.4.1.2011.2.23.1.18.4.7.1		not-accessible	An entry in hwLswFabricTable.
I32 hwLswFabricPeakIn	1.3.6.1.4.1.2011.2.23.1.18.4.7.1.4	Integer32	read-only	Ingress peak of utilization for fabric.
DAT hwLswFabricPeakInTime	1.3.6.1.4.1.2011.2.23.1.18.4.7.1.5	DateAndTime	read-only	Ingress peak time of utilization for fabric.
I32 hwLswFabricPeakOut	1.3.6.1.4.1.2011.2.23.1.18.4.7.1.6	Integer32	read-only	Egress peak of utilization for fabric.
DAT hwLswFabricPeakOutTime	1.3.6.1.4.1.2011.2.23.1.18.4.7.1.7	DateAndTime	read-only	Egress peak time of utilization for fabric.
hwLswFabricTable	1.3.6.1.4.1.2011.2.23.1.18.4.7		not-accessible	This table contains the information of fabric.
I32 hwLswFabricUtilIn	1.3.6.1.4.1.2011.2.23.1.18.4.7.1.2	Integer32	read-only	Ingress utilization of fabric.
I32 hwLswFabricUtilOut	1.3.6.1.4.1.2011.2.23.1.18.4.7.1.3	Integer32	read-only	Egress utilization of fabric.
INT hwLswFrameAdminStatus	1.3.6.1.4.1.2011.2.23.1.18.4.2.1.5	INTEGER	read-only	The Status of frame.
STR hwLswFrameDesc	1.3.6.1.4.1.2011.2.23.1.18.4.2.1.3	DisplayString	read-write	Frame description.
hwLswFrameEntry	1.3.6.1.4.1.2011.2.23.1.18.4.2.1		not-accessible	Frame description table entry.
I32 hwLswFrameIndex	1.3.6.1.4.1.2011.2.23.1.18.4.2.1.1	Integer32	read-only	The unique index of frame.
hwLswFrameTable	1.3.6.1.4.1.2011.2.23.1.18.4.2		not-accessible	Frame information table.
I32 hwLswFrameType	1.3.6.1.4.1.2011.2.23.1.18.4.2.1.2	Integer32	read-only	Frame type.
hwLswPortEntry	1.3.6.1.4.1.2011.2.23.1.18.4.5.1		not-accessible	Port configuration table entry.
I32 hwLswPortIfindex	1.3.6.1.4.1.2011.2.23.1.18.4.5.1.3	Integer32	read-only	The value of ifIndex of the port.
I32 hwLswPortIndex	1.3.6.1.4.1.2011.2.23.1.18.4.5.1.1	Integer32	read-only	The port number on the device. The first port number is 1, which is reserved if the port does not exist.
INT hwLswPortIsPlugged	1.3.6.1.4.1.2011.2.23.1.18.4.5.1.4	INTEGER	read-only	Port is plugged or not.
INT hwLswPortLoopbackAutoStopSupport	1.3.6.1.4.1.2011.2.23.1.18.4.6.1.4	INTEGER	read-only	Whether this port support NEED-MANNUL-NOLOOP mode or not.
hwLswPortLoopbackEntry	1.3.6.1.4.1.2011.2.23.1.18.4.6.1		not-accessible	Port loopback test table entry.
INT hwLswPortLoopbackExternalResult	1.3.6.1.4.1.2011.2.23.1.18.4.6.1.8	INTEGER	read-write	The external loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.
INT hwLswPortLoopbackInternalResult	1.3.6.1.4.1.2011.2.23.1.18.4.6.1.7	INTEGER	read-write	The internal loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.
INT hwLswPortLoopbackIsSupport	1.3.6.1.4.1.2011.2.23.1.18.4.6.1.1	INTEGER	read-only	The loopback type can be supported by current port.
INT hwLswPortLoopbackLocalResult	1.3.6.1.4.1.2011.2.23.1.18.4.6.1.6	INTEGER	read-write	The local loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.
INT hwLswPortLoopbackOperate	1.3.6.1.4.1.2011.2.23.1.18.4.6.1.2	INTEGER	read-write	Port loopback operate type. Read operation not supported.
INT hwLswPortLoopbackRemoteResult	1.3.6.1.4.1.2011.2.23.1.18.4.6.1.5	INTEGER	read-write	The remote loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.
INT hwLswPortLoopbackResult	1.3.6.1.4.1.2011.2.23.1.18.4.6.1.3	INTEGER	read-only	Loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.
hwLswPortLoopbackTable	1.3.6.1.4.1.2011.2.23.1.18.4.6		not-accessible	Port loopback test table.
hwLswPortTable	1.3.6.1.4.1.2011.2.23.1.18.4.5		not-accessible	Port configuration table.
INT hwLswPortType	1.3.6.1.4.1.2011.2.23.1.18.4.5.1.2	INTEGER	read-only	Normally the port type is the same as its card type. When there are different types of ports in one card, use the actual port type.
INT hwLswSlotAdminStatus	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.8	INTEGER	read-only	Slot status.
hwLswSlotConf	1.3.6.1.4.1.2011.2.23.1.18.4
I32 hwLswSlotCpuRatio	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.4	Integer32	read-only	CPU usage of the slot in accuracy of 1%, and the range of value is 1 to 100.
STR hwLswSlotDesc	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.3	DisplayString	read-write	Slot description.
hwLswSlotEntry	1.3.6.1.4.1.2011.2.23.1.18.4.3.1		not-accessible	Slot description table entry.
I32 hwLswSlotIndex	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.1	Integer32	read-only	Slot index. When the slot is empty, listed as vacant slot.
U32 hwLswSlotMemory	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.11	Unsigned32	read-only	The memory of system on the board. Note that the system memory means the memory can be used by the software platform. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
U32 hwLswSlotMemoryRatio	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.13	Unsigned32	read-only	The percentage of system memory in use on the board. Note that the system memory means the memory can be used by the software platform.
U32 hwLswSlotMemoryUsed	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.12	Unsigned32	read-only	The system memory in use on the board. Note that the system memory means the memory can be used by the software platform. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
I32 hwLswSlotNumber	1.3.6.1.4.1.2011.2.23.1.18.4.2.1.4	Integer32	read-only	Number of slots of the current frame.
INT hwLswSlotOperStatus	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.9	INTEGER	read-write	Slot operation status.
STR hwLswSlotPcbVersion	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.5	DisplayString	read-only	Hardware version of the board.
U32 hwLswSlotPhyMemory	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.10	Unsigned32	read-only	The memory of physical on the board. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
STR hwLswSlotSoftwareVersion	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.6	DisplayString	read-only	Software version of the board.
hwLswSlotTable	1.3.6.1.4.1.2011.2.23.1.18.4.3		not-accessible	Slot description table.
I32 hwLswSlotTemperature	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.14	Integer32	read-only	The temperature of system on the board.
HWL hwLswSlotType	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.2	HwLswTypeOfSlot	read-only	Slot type. BOM number is recommended.
INT hwLswSubslotAdminStatus	1.3.6.1.4.1.2011.2.23.1.18.4.4.1.4	INTEGER	read-only	Status of the pinch board in the subslot.
hwLswSubslotEntry	1.3.6.1.4.1.2011.2.23.1.18.4.4.1		not-accessible	Subslot description table entry.
I32 hwLswSubslotFirstIfIndex	1.3.6.1.4.1.2011.2.23.1.18.4.4.1.5	Integer32	read-only	The value of ifIndex of the first physical port in the pinch board.
I32 hwLswSubslotIndex	1.3.6.1.4.1.2011.2.23.1.18.4.4.1.1	Integer32	read-only	Subslot index.
I32 hwLswSubslotNumber	1.3.6.1.4.1.2011.2.23.1.18.4.3.1.7	Integer32	read-only	Number of the cards of the board.
I32 hwLswSubslotPortNum	1.3.6.1.4.1.2011.2.23.1.18.4.4.1.3	Integer32	read-only	Number of physical ports in the pinch board.
hwLswSubslotTable	1.3.6.1.4.1.2011.2.23.1.18.4.4		not-accessible	Subslot description table.
HWL hwLswSubslotType	1.3.6.1.4.1.2011.2.23.1.18.4.4.1.2	HwLswTypeOfSlot	read-only	Type of the pinch board in the subslot.
I32 hwLswSysCpuRatioEx	1.3.6.1.4.1.2011.2.23.1.18.1.3	Integer32	read-only	CPU usage of the system in accuracy of 1%, and the range of value is 1 to 100.
IP hwLswSysIpAddr	1.3.6.1.4.1.2011.2.23.1.18.1.1	IpAddress	read-only	System IP address, which is the primary IP address of the VLAN interface that has smallest VLAN ID and is configured IP address.
IP hwLswSysIpMask	1.3.6.1.4.1.2011.2.23.1.18.1.2	IpAddress	read-only	Mask of the system IP address.
IP hwLswSysManagementIpAddr	1.3.6.1.4.1.2011.2.23.1.18.1.9	IpAddress	read-write	System IP address.
IP hwLswSysManagementIpMask	1.3.6.1.4.1.2011.2.23.1.18.1.10	IpAddress	read-write	Mask of the system IP address.
I32 hwLswSysManagementVlan	1.3.6.1.4.1.2011.2.23.1.18.1.7	Integer32	read-write	System management VLAN.
U32 hwLswSysMemory	1.3.6.1.4.1.2011.2.23.1.18.1.14	Unsigned32	read-only	The memory of system. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
U32 hwLswSysMemoryRatio	1.3.6.1.4.1.2011.2.23.1.18.1.16	Unsigned32	read-only	The percentage of system memory in use. Note that the system memory means the memory can be used by the software platform. hwLswSysMemoryUsed hwLswSysMemoryRatio = -------------------- hwLswSysMemory For the distributed device, it represents the memory used ratio on the master slot.
U32 hwLswSysMemoryUsed	1.3.6.1.4.1.2011.2.23.1.18.1.15	Unsigned32	read-only	The system memory in use. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
U32 hwLswSysPhyMemory	1.3.6.1.4.1.2011.2.23.1.18.1.13	Unsigned32	read-only	The memory of physical. For the distributed device, it represents the memory size on the master slot. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
hwLswSystemPara	1.3.6.1.4.1.2011.2.23.1.18.1
I32 hwLswSysTemperature	1.3.6.1.4.1.2011.2.23.1.18.1.17	Integer32	read-only	The temperature of system. For the distributed device, it represents the temperature on the master slot.
DAT hwLswSysTime	1.3.6.1.4.1.2011.2.23.1.18.1.5	DateAndTime	read-write	System time.
INT hwLswSysUNMCastDropEnable	1.3.6.1.4.1.2011.2.23.1.18.1.6	INTEGER	read-write	Enable or disable discarding of unknown multicast packet.
STR hwLswSysVersion	1.3.6.1.4.1.2011.2.23.1.18.1.4	DisplayString	read-only	Information of the system version.
STR hwLswSysVlanRange	1.3.6.1.4.1.2011.2.23.1.18.1.8	DisplayString	read-write	System VLAN range, if set VLAN range, must bind mangement IP/Mask.
I32 hwMacAddressCountMachine	1.3.6.1.4.1.2011.2.23.1.18.1.12	Integer32	read-only	Supportted MAC address number on machine.
I32 hwMacAddressCountPort	1.3.6.1.4.1.2011.2.23.1.18.1.11	Integer32	read-only	Supportted MAC address number on port.

FAQ

What kind of data does HUAWEI-LSW-DEV-ADM-MIB expose on a Huawei enterprise LAN switch?
It provides platform-specific configuration and status objects for administering the switch, giving an SNMP manager a way to read and adjust Huawei-specific device settings that sit alongside the standard interface/bridge data reported by vendor-neutral MIBs.

When would an administrator reach for HUAWEI-LSW-DEV-ADM-MIB instead of a standard MIB like IF-MIB?
When the task requires viewing or setting Huawei-specific device administration configuration and status that isn't represented in vendor-neutral interface MIBs — for example, confirming platform-level settings unique to the Huawei LAN switch line during a device audit.

RFC description

Huawei LAN switch device administration MIB; manages device-level configuration and administrative parameters on Huawei switches.

Start monitoring Huawei LAN switch (LSW series, device administration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-LSW-DEV-ADM-MIB