All MIBs › HUAWEI-ANCP-AN-MIB
Organization: IETF ANCP Working Group
Last Updated: 2010-07-19
Category: Domain: DSL, Vendor: Huawei
Description: Huawei ANCP (Access Node Control Protocol) MIB for managing communication between the access node and the NAS in broadband networks.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-ANCP-AN-MIB?
HUAWEI-ANCP-AN-MIB is registered under Huawei's enterprise MIB tree (huaweiMgmt.106) but its MODULE-IDENTITY names the IETF ANCP Working Group as the originating organization, indicating it implements the access-node (AN) side of the standards-track Access Node Control Protocol (ANCP, based on GSMP) used between DSL access nodes (DSLAMs) and a Network Access Server (NAS/BRAS) in broadband networks. Its ancpAnSessionConfigTable, indexed by ancpAnSessionConfigSessionId, configures each ANCP session's GSMP version, encapsulation (currently tcp only), timers (AliveTimer, PortReportShaper, AggregateReportShaper, TransportRetryTimer, AncpRetryTimer), NAS IP address/port (default 6068), and VLAN association (Svid/SPrio/Cvid/CPrio); the companion ancpAnCurrentSessionTable reports live session state (ancpAnCurrentSessionState: null/synsent/synrcvd/estab) plus sent/received/discarded message counters. A session stuck out of the estab state, or a rising ancpAnCurrentSessionStatDiscardedMessages count, points to an ANCP adjacency or transport problem that can prevent the NAS from receiving per-subscriber-line topology and event information, and administrators can download the HUAWEI-ANCP-AN-MIB file for use with a MIB browser when managing Huawei broadband access nodes running ANCP.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-ANCP-AN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei DSL access node (DSLAM) platforms implementing the access-node side of ANCP
Monitoring Examples
An operator polls ancpAnCurrentSessionState for a configured session and finds it cycling between synsent and null instead of reaching estab; combined with a nonzero ancpAnCurrentSessionStatDiscardedMessages count, this would indicate a persistent ANCP adjacency failure between the access node and its NAS, likely due to a transport or GSMP version mismatch.
What Can Be Monitored
- ANCP session configuration (timers, encapsulation, NAS address)
- ANCP session operational state (null/synsent/synrcvd/estab)
- sent/received/discarded ANCP message counters
- session uptime and counter discontinuity time
- per-interface partition assignment
- session up/down notifications
This MIB depends on
Related MIBs
Imported Objects
From GSMP-MIB
| GsmpNameType | |
| GsmpPartitionIdType | |
| GsmpVersion |
From HUAWEI-ANCP-TC-MIB
| AncpSessionCapabilities | |
| GsmpSubVersion |
From HUAWEI-MIB
| huaweiMgmt | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType | |
| InetPortNumber |
From Q-BRIDGE-MIB
| VlanIdOrNone |
From RMON2-MIB
| ZeroBasedCounter32 |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 | |
| mib-2 | |
| zeroDotZero |
From SNMPv2-TC
| RowPointer | |
| RowStatus | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwAncpAnMIB | 1.3.6.1.4.1.2011.5.106 | The MIB module is for entities implementing the access node side of the Access Node Control Protocol (ANCP). Copyright (C) The IETF Trust (2008). The initial version of this MIB module was published in RFC yyyy; for full legal notices see the RFC itself. | ||
| ancpAnNotifications | 1.3.6.1.4.1.2011.5.106.0 | |||
| NTF ancpAnSessionDown | 1.3.6.1.4.1.2011.5.106.0.1 | This notification is generated whenever an ANCP session goes down. A session can go down for several reasons: 1) The ANCP session can be deleted by a manager from the ancpAnSessionConfigTable, and hence it will also be removed from the ancpAnCurrentSessionTable. 2) The session can go operational down due to some malfunction in the network, the AN, or the NAS. In this case, the ANCP session will be still in the ancpAnSessionConfigTable and ancpAnCurrentSessionTable, but the ancpAnCurrentSessionState moves from the estab state to another state. This notification is only generated when ancpAnSessionConfigNotifyDnEnable of this session is set to true. | ||
| NTF ancpAnSessionUp | 1.3.6.1.4.1.2011.5.106.0.2 | This notification is generated when an ANCP session enters the estab state as given by ancpAnCurrentSessionState. Since ancpAnCurrentSessionAnInstance identifies the ANCP session uniquely the other attributes can be derived from this attribute. This notification is only generated when ancpAnSessionConfigNotifyUpEnable of this session is set to true. | ||
| ancpAnObjects | 1.3.6.1.4.1.2011.5.106.1 | |||
| T/F ancpAnPartitionsUsed | 1.3.6.1.4.1.2011.5.106.1.1 | TruthValue | read-write | This object allows the manager to specify whether or not to use the 'Partition ID' field in the GSMP message header. When set to 'false' the application does not use partitions and the ancpAnSessionConfigPartitionId object MUST be zero for all sessions. In addition, rows SHOULD not be created in the ancpAnInterfaceConfigTable. When set to 'true' the application uses partitions and the ancpAnSessionConfigPartitionId object MUST be set, for every session, to a nonzero value. In such a case, rows are created in ancpAnInterfaceConfigTable. The default value zero in ancpAnInterfaceConfigPartitionId object means that the operator did not associate the interface with a particular partition. Note that modifying the value of this object is restricted. E.g., prior to setting it from 'true' to 'false' ancpAnSessionConfigRowStatus objects for all sessions should be set to notInService and the partition ID value MUST be set to zero. The value of this object is persistent. Default: false(2) |
| U32 ancpAnNextSessionId | 1.3.6.1.4.1.2011.5.106.1.2 | Unsigned32 | read-only | The object reports the next index (potential value of ancpAnSessionConfigSessionId) which is available for creating a new row in ancpAnSessionConfigTable. If no such value is available (e.g., the table is full or any other reason) the object reports '0' (zero). An available value V becomes unavailable when a row is actually created with ancpAnSessionConfigSessionId=V and until then consecutive GET commands with this object may return the same value V. Note that eventually only one row creation with the value V can succeed. An unavailable value V becomes available again when a row with ancpAnSessionConfigSessionId=V in ancpAnSessionConfigTable is deleted. |
| ancpAnSessionConfigTable | 1.3.6.1.4.1.2011.5.106.1.3 | not-accessible | This table represents the ANCP sessions in the access node. An entry in this table needs to be configured (created) before an ANCP session might be started. | |
| ancpAnSessionConfigEntry | 1.3.6.1.4.1.2011.5.106.1.3.1 | not-accessible | An entry in the table showing the data for a specific actual or yet to be established session. If partitions are used, one session corresponds to one specific access node partition. | |
| U32 ancpAnSessionConfigSessionId | 1.3.6.1.4.1.2011.5.106.1.3.1.1 | Unsigned32 | not-accessible | An index of a session referred by this row. The index is unique across all partitions. The referred session may be actually established or just potential. Prior to creating a row in the table it is advised to check the ancpAnNextSessionId for an available index. |
| ROW ancpAnSessionConfigRowStatus | 1.3.6.1.4.1.2011.5.106.1.3.1.2 | RowStatus | read-create | An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down the session and recreate it, depending on what session attributes have been modified. |
| GSM ancpAnSessionConfigGsmpVersion | 1.3.6.1.4.1.2011.5.106.1.3.1.3 | GsmpVersion | read-create | The maximum version number of the GSMP protocol that may be used in this session. The value of this object is persistent. |
| GSM ancpAnSessionConfigGsmpSubVersion | 1.3.6.1.4.1.2011.5.106.1.3.1.4 | GsmpSubVersion | read-create | The maximum subversion number of the GSMP protocol that may be used in this session. The value of this object is persistent. |
| INT ancpAnSessionConfigEncapsulationType | 1.3.6.1.4.1.2011.5.106.1.3.1.5 | INTEGER | read-create | Required encapsulation for this session. The value of this object is persistent. |
| ANC ancpAnSessionConfigCapabilities | 1.3.6.1.4.1.2011.5.106.1.3.1.6 | AncpSessionCapabilities | read-create | ANCP capabilities supported by the AN in this session. When all bits are set to zero then this means that no capabilities are supported. The value of this object is persistent. |
| U32 ancpAnSessionConfigAliveTimer | 1.3.6.1.4.1.2011.5.106.1.3.1.7 | Unsigned32 | read-create | The timer specifies the nominal time between periodic adjacency protocol messages generated by the access node. It is a constant for the duration of an ANCP session. The timer is specified in units of 100ms. The value of this object is persistent. |
| U32 ancpAnSessionConfigPortReportShaper | 1.3.6.1.4.1.2011.5.106.1.3.1.8 | Unsigned32 | read-create | The timer specifies the nominal time between 2 EventReport messages related to the same port. It is a constant for the duration of a GSMP session. The timer is specified in units of 100ms. The value of this object is persistent. |
| U32 ancpAnSessionConfigAggregateReportShaper | 1.3.6.1.4.1.2011.5.106.1.3.1.9 | Unsigned32 | read-create | The timer specifies the nominal time between 2 EventReport messages related to any port. It is a constant for the duration of a GSMP session. The timer is specified in units of 10ms. The value of this object is persistent. |
| U32 ancpAnSessionConfigTransportRetryTimer | 1.3.6.1.4.1.2011.5.106.1.3.1.10 | Unsigned32 | read-create | The timer specifies the nominal time between 2 transport connection setup attempts done by the access node. The transport protocol is specified in ancpAnSessionConfigEncapsulationType. The timer is specified in units of 100ms. A value 0 means that the access node will NOT initiate nor setup the transport connection. The value of this object is persistent. |
| U32 ancpAnSessionConfigAncpRetryTimer | 1.3.6.1.4.1.2011.5.106.1.3.1.11 | Unsigned32 | read-create | The timer specifies the nominal time between 2 ANCP connection setup attempts. The timer is specified in units of 100ms. A value 0 means that the access node will NOT spontaneously trigger an ANCP session. Whatever the setting of this timer, the access node shall always listen for ANCP session setup. The value of this object is persistent. |
| GSM ancpAnSessionConfigAnName | 1.3.6.1.4.1.2011.5.106.1.3.1.12 | GsmpNameType | read-create | The name of the access node. The first three octets must be an Organizationally Unique Identifier (OUI) that identifies the manufacturer of the access node. This object can be (one of) the MAC address(es) of the access node on the network side. When set to zero, the access node shall autonomously decide on using the most appropriate MAC address of the access node. Then the actually used access node name can be read from ancpAnCurrentSessionAnName. The value of this object is persistent. |
| GSM ancpAnSessionConfigPartitionId | 1.3.6.1.4.1.2011.5.106.1.3.1.13 | GsmpPartitionIdType | read-create | The Id for this session's specific access node partition. This object has a meaning only if partitions are used (ancpAnPartitionsUsed='true') and is ignored otherwise. The value of this object is persistent. |
| U32 ancpAnSessionConfigWindowSize | 1.3.6.1.4.1.2011.5.106.1.3.1.14 | Unsigned32 | read-create | The maximum number of unacknowledged request messages that may be transmitted by the controller without the possibility of loss. This field is used to prevent request messages from being lost in the access node because of overflow in the receive buffer. The field is a hint to the controller. The value of this object is persistent. |
| NUM ancpAnSessionConfigRelatedInterface | 1.3.6.1.4.1.2011.5.106.1.3.1.15 | InterfaceIndex | read-create | This object contains the value of an ifIndex object, defined in IF-MIB, indicating an interface corresponding to this session. The corresponding interface might be either physical or logical (e.g., IP Interface). The value of this object is persistent. |
| NUM ancpAnSessionConfigRelatedEntity | 1.3.6.1.4.1.2011.5.106.1.3.1.16 | RowPointer | read-create | This object contains the name of an object instance uniquely identifying a lower layer entity associated with this session. For example, in the case where the session is associated with an ATM VCC, this object might be set to an object identifier uniquely identifying that VCC (e.g., an object instance in atmVclTable). If unused, this object MUST have the value zeroDotZero. The value of this object is persistent. |
| VLA ancpAnSessionConfigSvid | 1.3.6.1.4.1.2011.5.106.1.3.1.17 | VlanIdOrNone | read-create | If the session is associated with a single VLAN, this object contains the VLAN ID of the single VLAN tag. If ancpAnSessionConfigCvid is also nonzero then the session is associated with two VLAN tags, S-VLAN tag and C-VLAN tag, then this object contains the VLAN ID of the S-VLAN tag (the outer VLAN tag). In both cases the value of this object SHOULD be nonzero. If the session is not associated with any VLAN, this object MUST have the default value 0. The value of this object is persistent. |
| U32 ancpAnSessionConfigSPrio | 1.3.6.1.4.1.2011.5.106.1.3.1.18 | Unsigned32 | read-create | If the session is associated with a single VLAN, this object contains the priority value of the single VLAN tag. If ancpAnSessionConfigCvid is also nonzero then the session is associated with two VLAN tags, S-VLAN tag and C-VLAN tag, then this object contains the priority value of the S-VLAN tag (the priority value of the outer VLAN tag). In both cases the value of this object SHOULD be in the range 0 to 7 inclusive. If the session is not associated with any VLAN, this object MUST have the default value 65535. The value of this object is persistent. |
| VLA ancpAnSessionConfigCvid | 1.3.6.1.4.1.2011.5.106.1.3.1.19 | VlanIdOrNone | read-create | If the session is associated with two VLANs, has both S-VLAN tag and C-VLAN tag, this object contains the VLAN ID of the inner VLAN tag (also called C-VLAN ID). In such a case the value of this object SHOULD be nonzero. If the session is not associated with any VLAN or if it is associated with a single VLAN, this object MUST have the default value 0. The value of this object is persistent. |
| U32 ancpAnSessionConfigCPrio | 1.3.6.1.4.1.2011.5.106.1.3.1.20 | Unsigned32 | read-create | If the session is associated with two VLANs, has both S-VLAN tag and C-VLAN tag, this object contains the priority value of the inner VLAN tag (also called C-VLAN priority). In such a case the value of this object SHOULD be in the range 0 to 7 inclusive. If the session is not associated with any VLAN or if it is associated with a single VLAN, this object MUST have the default value 65535. The value of this object is persistent. |
| IPt ancpAnSessionConfigNasIpAddressType | 1.3.6.1.4.1.2011.5.106.1.3.1.21 | InetAddressType | read-create | The type of address in ancpAnSessionConfigNasIpAddress. The value of this object is persistent. |
| IP ancpAnSessionConfigNasIpAddress | 1.3.6.1.4.1.2011.5.106.1.3.1.22 | InetAddress | read-create | The IP address used for the ANCP session peer (NAS). The type of this IP address attribute is determined by the value of ancpAnSessionConfigNasIpAddressType. The value of this object is persistent. |
| INE ancpAnSessionConfigEncapPortNumber | 1.3.6.1.4.1.2011.5.106.1.3.1.23 | InetPortNumber | read-create | The port number used for the transport protocol establishment to the ANCP peer. The transport protocol type is specified by ancpAnSessionConfigEncapsulationType and as it is set by default to 'tcp' then the default port number is set to 6068 (see details in http://www.iana.org/). Other port numbers may be relevant if other transport protocols are used. The value of this object is persistent. |
| T/F ancpAnSessionConfigNotifyDnEnable | 1.3.6.1.4.1.2011.5.106.1.3.1.24 | TruthValue | read-create | This object specifies if ancpAnSessionDown notification should be generated when this session leaves the 'estab' state as given by ancpAnCurrentSessionState in the corresponding row in ancpAnCurrentSessionTable. The value of this object is persistent. |
| T/F ancpAnSessionConfigNotifyUpEnable | 1.3.6.1.4.1.2011.5.106.1.3.1.25 | TruthValue | read-create | This object specifies if ancpAnSessionUp notification should be generated when this session goes to 'estab' state as given by ancpAnCurrentSessionState in the corresponding row in ancpAnCurrentSessionTable. The value of this object is persistent. |
| ancpAnCurrentSessionTable | 1.3.6.1.4.1.2011.5.106.1.4 | not-accessible | This table gives actual information of the sessions in the access node. A row in this table is created when the corresponding row in the ancpAnSessionConfigTable is created. A row in this table is deleted when the corresponding row in the ancpAnSessionConfigTable is deleted. | |
| ancpAnCurrentSessionEntry | 1.3.6.1.4.1.2011.5.106.1.4.1 | not-accessible | An entry in the table showing the data for a specific actual session. | |
| INT ancpAnCurrentSessionState | 1.3.6.1.4.1.2011.5.106.1.4.1.1 | INTEGER | read-only | The state of this session. The null (1) state is returned if the proper encapsulation data is not yet configured, if the row is not in active status or if the session is in NULL state as defined in the GSMP specification. |
| GSM ancpAnCurrentSessionGsmpVersion | 1.3.6.1.4.1.2011.5.106.1.4.1.2 | GsmpVersion | read-only | The actual version number of the GSMP protocol that is used in this session. This object has value 0 if ancpAnCurrentSessionState is not estab(4). |
| GSM ancpAnCurrentSessionGsmpSubVersion | 1.3.6.1.4.1.2011.5.106.1.4.1.3 | GsmpSubVersion | read-only | The actual subversion number of the GSMP protocol that may be used in this session. This object has value 0 if ancpAnCurrentSessionState is not estab(4). |
| GSM ancpAnCurrentSessionAnName | 1.3.6.1.4.1.2011.5.106.1.4.1.4 | GsmpNameType | read-only | The name of the access node used in this session. It should be the same as ancpAnSessionConfigAnName if that object is not set to zero. If ancpAnSessionConfigAnName is set to zero, then this object will contain the MAC address selected by the access node as described in the description of ancpAnSessionConfigAnName. The value of this object is used as value for the 'Sender Name' field in the header of the ANCP messages generated for this session by the AN. |
| GSM ancpAnCurrentSessionNasName | 1.3.6.1.4.1.2011.5.106.1.4.1.5 | GsmpNameType | read-only | The name of the NAS as advertised in the adjacency message. The value of this object is set to the value of the 'Sender Name' field in the header of the ANCP messages received on this session. This object has value 0 if ancpAnCurrentSessionState is not estab(4). |
| IPt ancpAnCurrentSessionAnIpAddressType | 1.3.6.1.4.1.2011.5.106.1.4.1.6 | InetAddressType | read-only | The type of address in ancpAnCurrentSessionAnIpAddress. |
| IP ancpAnCurrentSessionAnIpAddress | 1.3.6.1.4.1.2011.5.106.1.4.1.7 | InetAddress | read-only | The IP address used for the access node. The type of this IP address attribute is determined by the value of ancpAnCurrentSessionAnIpAddressType. |
| U32 ancpAnCurrentSessionAnInstance | 1.3.6.1.4.1.2011.5.106.1.4.1.8 | Unsigned32 | read-only | The instance number used by the access node during this session. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change when the link or node comes back up after going down. Zero is not a valid instance number. This object has value 0 if ancpAnCurrentSessionState is not estab(4). |
| U32 ancpAnCurrentSessionNasInstance | 1.3.6.1.4.1.2011.5.106.1.4.1.9 | Unsigned32 | read-only | The instance number used by the NAS during this session. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change when the link or node comes back up after going down. This object has value 0 if ancpAnCurrentSessionState is not estab(4). |
| ANC ancpAnCurrentSessionCapabilities | 1.3.6.1.4.1.2011.5.106.1.4.1.10 | AncpSessionCapabilities | read-only | The common ANCP capabilities supported by the AN and NAS in this session. The object has the value 0 if no capabilities are supported or if ancpAnCurrentSessionState is not estab(4). |
| TIK ancpAnCurrentSessionStartUptime | 1.3.6.1.4.1.2011.5.106.1.4.1.11 | TimeTicks | read-only | The value of sysUpTime when the session came to established state. This object has value 0 if ancpAnCurrentSessionState is not estab(4). |
| TIK ancpAnCurrentSessionDiscontinuityTime | 1.3.6.1.4.1.2011.5.106.1.4.1.12 | TimeTicks | read-only | The value of sysUpTime on the most recent occasion at which session's counters suffered a discontinuity. If no such discontinuities have occurred since then, this object contains the same value as ancpAnCurrentSessionStartUptime. |
| NUM ancpAnCurrentSessionStatSentMessages | 1.3.6.1.4.1.2011.5.106.1.4.1.13 | ZeroBasedCounter32 | read-only | The number of messages that have been sent in this session by the access node. All ANCP messages pertaining to this session after the session came to established state shall be counted, also including adjacency protocol messages and failure response messages. Discontinuities of this counter are indicated by ancpAnCurrentSessionDiscontinuityTime. |
| NUM ancpAnCurrentSessionStatReceivedValidMessages | 1.3.6.1.4.1.2011.5.106.1.4.1.14 | ZeroBasedCounter32 | read-only | The number of messages that have been received and processed in this session by the access node. All ANCP messages pertaining to this session after the session came to established state shall be counted, also including adjacency protocol messages and failure response messages. Discontinuities of this counter are indicated by ancpAnCurrentSessionDiscontinuityTime. |
| NUM ancpAnCurrentSessionStatDiscardedMessages | 1.3.6.1.4.1.2011.5.106.1.4.1.15 | ZeroBasedCounter32 | read-only | The number of messages that in this session have been received and discarded for whatever reason by the access node. All ANCP messages pertaining to this session after the session came to established state shall be counted, also including adjacency protocol messages and failure response messages. Discontinuities of this counter are indicated by ancpAnCurrentSessionDiscontinuityTime. |
| ancpAnInterfaceConfigTable | 1.3.6.1.4.1.2011.5.106.1.5 | not-accessible | This table configures the association of user facing interfaces to ANCP partitions in the access node. An entry in this table needs to be added by the agent for each relevant user facing interface with the value of ancpAnInterfaceConfigPartitionId set to zero at the time of the creation of the row. A relevant user facing interface is created whenever a row is created in the ifTable of the IF-MIB that can be controlled by ANCP. When such an interface is deleted from the ifTable, the corresponding row in this table has to be removed by the agent. Rows should only be created by the agent when ancpAnPartitionsUsed is set to 'true'. If no partitions are used, then no rows should be created in this table. | |
| ancpAnInterfaceConfigEntry | 1.3.6.1.4.1.2011.5.106.1.5.1 | not-accessible | An entry in the table showing the partition id for a specific user facing interface | |
| GSM ancpAnInterfaceConfigPartitionId | 1.3.6.1.4.1.2011.5.106.1.5.1.1 | GsmpPartitionIdType | read-write | A partition Id associated with the related ifIndex. Upon creation of the row, the value is set to '00'H. The value of this object is persistent. |
| ancpAnConformance | 1.3.6.1.4.1.2011.5.106.2 | |||
| ancpAnGroups | 1.3.6.1.4.1.2011.5.106.2.1 | |||
| ancpAnConfigGroup | 1.3.6.1.4.1.2011.5.106.2.1.1 | These objects apply to the configuration of ANCP sessions in access nodes. | ||
| ancpAnRelatedInterfaceGroup | 1.3.6.1.4.1.2011.5.106.2.1.2 | This object contains the ifIndex of an interface defined in IF-MIB. If an ANCP session must be associated with an IP interface, then this group must be supported. This group also must be supported together with the ancpAnRelatedEntityGroup in case the ANCP session is to be associated with an ATM PVC. | ||
| ancpAnRelatedEntityGroup | 1.3.6.1.4.1.2011.5.106.2.1.3 | This object contains the name of an object instance uniquely identifying a lower layer entity. If an ANCP session must be associated with an ATM PVC, then this group together with ancpAnRelatedInterfaceGroup must be supported. | ||
| ancpAnRelatedVlanGroup | 1.3.6.1.4.1.2011.5.106.2.1.4 | These objects contains all VLAN-related configuration when the ANCP session is associated with a particular VLAN. If an ANCP session must be associated with a VLAN (or VLAN stack), then this group must be supported. | ||
| ancpAnCurrentGroup | 1.3.6.1.4.1.2011.5.106.2.1.5 | These objects show the operational state of all ANCP sessions configured in the access node. | ||
| ancpAnInterfaceGroup | 1.3.6.1.4.1.2011.5.106.2.1.6 | These objects are used to assign user facing interface to partitions. | ||
| ancpAnNotificationsGroup | 1.3.6.1.4.1.2011.5.106.2.1.7 | These objects are used to enable or disable the generation of notifications by the access node about changes in the state of ANCP sessions. | ||
| ancpAnCompliances | 1.3.6.1.4.1.2011.5.106.2.2 | |||
| ancpAnModuleCompliance | 1.3.6.1.4.1.2011.5.106.2.2.1 | The compliance statement for agents that support the ANCP MIB module for access nodes. |
RFC description
Access Node Control Protocol (ANCP) management for Huawei access nodes providing access line management.
Start monitoring Huawei DSL access node (DSLAM) implementing ANCP access-node side with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.