HUAWEI-ANCP-AN-MIB :: ancpAnSessionConfigCPrio

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-ANCP-AN-MIB › ancpAnSessionConfigCPrio

ancpAnSessionConfigCPrio

Module: HUAWEI-ANCP-AN-MIB

OID (symbolic): HUAWEI-ANCP-AN-MIB::ancpAnSessionConfigCPrio

OID (numeric): 1.3.6.1.4.1.2011.5.106.1.3.1.20

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-create

Description: If the session is associated with two VLANs, has both S-VLAN tag and C-VLAN tag, this object contains the priority value of the inner VLAN tag (also called C-VLAN priority). In such a case the value of this object SHOULD be in the range 0 to 7 inclusive. If the session is not associated with any VLAN or if it is associated with a single VLAN, this object MUST have the default value 65535. The value of this object is persistent.

What is ancpAnSessionConfigCPrio?

This read-create object holds the 802.1p priority value (0-7) of the inner C-VLAN tag when this ANCP session has both S-VLAN and C-VLAN tags; it defaults to 65535 if the session has no C-VLAN or no VLAN at all, and its value persists across reboots. An admin uses this in a QinQ deployment to see or configure the priority marking on the inner (customer) VLAN tag for this session. Setting it to 3 would mark this session's inner C-VLAN tag with 802.1p priority 3.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.5huaweiMgmtHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.5.106hwAncpAnMIBHUAWEI-ANCP-AN-MIB
1.3.6.1.4.1.2011.5.106.1ancpAnObjectsHUAWEI-ANCP-AN-MIB
1.3.6.1.4.1.2011.5.106.1.3ancpAnSessionConfigTableHUAWEI-ANCP-AN-MIB
1.3.6.1.4.1.2011.5.106.1.3.1ancpAnSessionConfigEntryHUAWEI-ANCP-AN-MIB
1.3.6.1.4.1.2011.5.106.1.3.1.20ancpAnSessionConfigCPrioHUAWEI-ANCP-AN-MIB