HPNSAHOTSWAPSUBSYSTEM-MIB

All MIBs › HPNSAHOTSWAPSUBSYSTEM-MIB

Category: Domain: Server Hardware, Vendor: HP/HPE

Description: Manages HP NetServer Agent hot-swap subsystem for online replacement of drives and PSUs on HP ProLiant servers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPNSAHOTSWAPSUBSYSTEM-MIB?

HPNSAHOTSWAPSUBSYSTEM-MIB is an HP NetServer proprietary MIB (enterprise OID 11) reporting hot-swap SCSI storage-subsystem inventory and health. Its objects cover MIB revision, an agent table (index, name, version, date), a module table (index, SCSI-cable type, temperature status, switch state, device-startup mode, middle-drive/high-8 SCSI addresses), a device table (module index, device index, existence, SCSI address, power status), and a power-alert delay setting. As a hardware-status MIB it lets an administrator confirm which hot-swap SCSI bays are occupied and their power/temperature status. It is deployed on HP NetServer platforms with hot-swap SCSI subsystems. Engineers can download the HPNSAHOTSWAPSUBSYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPNSAHOTSWAPSUBSYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP NetServer platforms (hot-swap SCSI subsystems)

Monitoring Examples

An administrator checks hpnsaHSDevExistence and hpnsaHSModuleTempStatus to confirm hot-swap SCSI bay occupancy and temperature health on an HP NetServer.

What Can Be Monitored

hot-swap SCSI bay occupancy and temperature/power status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hp	1.3.6.1.4.1.11
nm	1.3.6.1.4.1.11.2
hpnsa	1.3.6.1.4.1.11.2.23
hpnsaHotSwap	1.3.6.1.4.1.11.2.23.20
hpnsaHSMibRev	1.3.6.1.4.1.11.2.23.20.1
INT hpnsaHSMibRevMajor	1.3.6.1.4.1.11.2.23.20.1.1	INTEGER	read-only	The major revision level of the MIB.
INT hpnsaHSMibRevMinor	1.3.6.1.4.1.11.2.23.20.1.2	INTEGER	read-only	The minor revision level of the MIB.
hpnsaHSAgent	1.3.6.1.4.1.11.2.23.20.2
hpnsaHSAgentTable	1.3.6.1.4.1.11.2.23.20.2.1		not-accessible	A table of SNMP Agents that satisfy requests for this MIB.
hpnsaHSAgentEntry	1.3.6.1.4.1.11.2.23.20.2.1.1		not-accessible	A description of the agents that access Hot Swap Subsystem
INT hpnsaHSAgentIndex	1.3.6.1.4.1.11.2.23.20.2.1.1.1	INTEGER	read-only	A unique index for this module description.
STR hpnsaHSAgentName	1.3.6.1.4.1.11.2.23.20.2.1.1.2	DisplayString	read-only	Name of the Agent/Agents satisfying SNMP requests for this MIB.
STR hpnsaHSAgentVersion	1.3.6.1.4.1.11.2.23.20.2.1.1.3	DisplayString	read-only	Version number of the Agent/Agents satisfying SNMP requests for this MIB.
OCT hpnsaHSAgentDate	1.3.6.1.4.1.11.2.23.20.2.1.1.4	OCTET STRING	read-only	The date on which this Agent was created. field octets contents range _________________________________________________ 1 1 years since 1900 0..255 2 2 month 1..12 3 3 day 1..31 4 4 hour 0..23 5 5 minute 0..59 6 6 second 0..59
hpnsaHSModule	1.3.6.1.4.1.11.2.23.20.3
hpnsaHSModuleTable	1.3.6.1.4.1.11.2.23.20.3.1		not-accessible	A table of Hot Swap Subsystem module information entries.
hpnsaHSModuleEntry	1.3.6.1.4.1.11.2.23.20.3.1.1		not-accessible	Hot Swap Subsystem module information.
INT hpnsaHSModuleIndex	1.3.6.1.4.1.11.2.23.20.3.1.1.1	INTEGER	read-only	A unique index for the Hot Swap module.
INT hpnsaHSModuleScsiCableType	1.3.6.1.4.1.11.2.23.20.3.1.1.2	INTEGER	read-only	The SCSI cable type attached to the backplane on the right side a Hot Swap Subsystem cage.
INT hpnsaHSModuleTempStatus	1.3.6.1.4.1.11.2.23.20.3.1.1.3	INTEGER	read-only	Status of the Hot Swap Subsystem's temperature sensor.
INT hpnsaHSModuleSwitchState	1.3.6.1.4.1.11.2.23.20.3.1.1.4	INTEGER	read-only	Status of the DIP switches on the Hot Swap Subsystem.
INT hpnsaHSModuleDeviceStartup	1.3.6.1.4.1.11.2.23.20.3.1.1.5	INTEGER	read-only	State of the Disk Spin Up DIP switch on the Hot Swap Subsystem. 1 = disks spin up with the system after a period of time 2 = disks spin up after receiving SCSI Start Command
INT hpnsaHSModuleMiddleDrvAddr	1.3.6.1.4.1.11.2.23.20.3.1.1.6	INTEGER	read-only	State of the Middle Drive Address DIP switch on the Hot Swap Subsystem. 1 = lowest value, either 0 or 8 depending on High Eight Address 2 = default, either 2 or 10 depending on High Eight Address
INT hpnsaHSModuleHi8ScsiAddr	1.3.6.1.4.1.11.2.23.20.3.1.1.7	INTEGER	read-only	State of the High Eight SCSI Address DIP switch on the Hot Swap Subsystem. 1 = SCSI address range from 1 to 7 2 = SCSI address range from 9 to 15
hpnsaHSDev	1.3.6.1.4.1.11.2.23.20.4
hpnsaHSDevTable	1.3.6.1.4.1.11.2.23.20.4.1		not-accessible	A table of Hot Swap Subsystem device information entries.
hpnsaHSDevEntry	1.3.6.1.4.1.11.2.23.20.4.1.1		not-accessible	Hot Swap Subsystem device information.
INT hpnsaHSDevModuleIndex	1.3.6.1.4.1.11.2.23.20.4.1.1.1	INTEGER	read-only	A unique index for the Hot Swap module.
INT hpnsaHSDevIndex	1.3.6.1.4.1.11.2.23.20.4.1.1.2	INTEGER	read-only	Physical device number in the Hot Swap Module.
INT hpnsaHSDevExistence	1.3.6.1.4.1.11.2.23.20.4.1.1.3	INTEGER	read-only	Defines whether a device exists in the physical slot of the Hot Swap Subsystem.
INT hpnsaHSDevScsiAddr	1.3.6.1.4.1.11.2.23.20.4.1.1.4	INTEGER	read-only	SCSI address of the device in the physical slot of the Hot Swap Subsystem.
INT hpnsaHSDevPowerStatus	1.3.6.1.4.1.11.2.23.20.4.1.1.5	INTEGER	read-only	Defines whether the power connector of a particular device in the Hot Swap Subsystem is connected.
INT hpnsaHSPwrAlertDelay	1.3.6.1.4.1.11.2.23.20.4.2	INTEGER	read-write	Set this variable to non-zero integer value to skip checking the power connection state of Starfish device.

RFC description

HP hot swap subsystem management providing monitoring of hot-swappable modules, devices, and power status in HP servers.

Start monitoring HP NetServer platform (hot-swap SCSI subsystem) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPNSAHOTSWAPSUBSYSTEM-MIB

What Is HPNSAHOTSWAPSUBSYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description