HP-ICF-DEBUGLOG-MIB

All MIBs › HP-ICF-DEBUGLOG-MIB

Organization: HP Networking

Last Updated: 2017-07-04

Category: Device Management, Technology: Logging/Syslog, Vendor: HP/HPE

Description: HP ICF SNMP MIB for debug log configuration and retrieval to support troubleshooting and diagnostics on HP ProCurve switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ICF-DEBUGLOG-MIB?

This is an HP Intelligent Configuration Framework (ICF) MIB that manages debug logging configuration on HP ProCurve switches, allowing operators to enable or disable debug message logging for various debug message types to support troubleshooting. Although no sample objects were provided, a debug log MIB of this kind typically exposes objects to select which debug facilities/severities are logged, buffer/log retrieval controls, and enable/disable status per debug category. Its monitoring value is oriented toward diagnostics workflow rather than continuous health monitoring—it lets an administrator confirm which debug logging is currently active on a switch and pull recent debug output when investigating a fault, rather than exposing sensor telemetry. It is part of HP's private ICF MIB family and depends on that framework's conventions rather than standard IETF MIBs. It would be used on HP ProCurve managed switches during active troubleshooting sessions in enterprise network environments, typically with an HP-ICF-DEBUGLOG-MIB MIB Browser open alongside the CLI to confirm which debug categories are currently active.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-DEBUGLOG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP ProCurve managed switch

Monitoring Examples

No sample objects were provided for this MIB, so specific object names cannot be cited; however, based on its stated purpose an operator would typically enable a specific debug message type via a configuration object and then retrieve accumulated debug log entries to diagnose an active issue, such as a spanning-tree flap or interface error. Because this is a diagnostics/logging control MIB rather than a live performance-counter MIB, it would not be used for continuous monitoring but rather queried on-demand during troubleshooting. Confirming exact object names would require consulting the actual MIB source.

What Can Be Monitored

debug logging enable/disable state per message type
debug log retrieval

Imported Objects

From HP-ICF-OID

hpicfDebugLog

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfDebugLogMib	1.3.6.1.4.1.11.2.14.11.5.1.64.1			The Debug MIB allows to enable / disable debug logging for all debug message types. This HP application enables / disables debug log messages.
hpicfDebugLogObjects	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1
hpicfDebugLogControlTable	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1		not-accessible	This table contains one entry per debug message type for debug logging configuration.
hpicfDebugLogControlEntry	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1		not-accessible	Debug logging configuration information for a particular debug message type.
I32 hpicfDebugLogIndex	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1.1	Integer32	not-accessible	An unique number that identifies the debug message type for debug logging.
STR hpicfDebugLogDescr	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1.2	DisplayString	read-only	This object provides description for the debug message type that can be enabled for debug logging.
I32 hpicfDebugLogContainedIn	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1.3	Integer32	read-only	The value of hpicfDebugLogIndex for the debug message type which 'contains' this debug message type. Note that the set of 'containment' relationships define a strict hierarchy.
T/F hpicfDebugLogStatus	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1.4	TruthValue	read-write	This object enables or disables a specific debug option. The object 'hpicfDebugLogDescr' can be queried to see which instance corresponds to which debug option. Note that disabling an instance of this object also disables the corresponding instance of the object 'hpicfDebugLogPersistent'.
T/F hpicfDebugLogPersistent	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1.5	TruthValue	read-write	This object determines the status of a debug message type for persistent debug logging.
HPI hpicfDebugLogLevel	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.2	HpicfDebugLogLevels	read-write	The log level value for debug message type such as SSH.This scalar takes syslog severity values 'fatal\|error\|info\|verbose\|debug\|debug2\|debug3'.
hpicfDebugDestControlTable	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.3		not-accessible	This table contains one entry per debug destination type i.e. Syslog/Buffer.
hpicfDebugDestControlEntry	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.3.1		not-accessible	Debug logging configuration information for a particular debug destination type.
HPI hpicfDebugDestIndex	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.3.1.1	HpicfDebugDestType	not-accessible	The index that uniquely identifies each debug destination type for debug logging.
T/F hpicfDebugDestStatus	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.3.1.2	TruthValue	read-write	This object determines the enable or disable status of a particular debug destination type such as Syslog Server or Buffer. Note that disabling an instance of this object also disables the corrsponding instance of the object 'hpicfDebugDestPersistent'.
T/F hpicfDebugDestPersistent	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.3.1.3	TruthValue	read-write	This object determines the status of a particular debug destination type for persistent configuration.
T/F hpicfDebugTimeStamp	1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.4	TruthValue	read-write	This object is used to enable or disable system time to be associated with the debug log message. true - enable system time to be associated with the debug logs. false - enable system Uptime to be associated with the debug logs. By default, system Uptime will be associated with the debug logs.
hpicfDebugLogConformance	1.3.6.1.4.1.11.2.14.11.5.1.64.1.2
hpicfDebugLogCompliances	1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.1
hpicfDebugLogCompliance	1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.1.1			The compliance statement for debug logging entities which implement the DEBUGLOG-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP.
hpicfDebugLogCompliance1	1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.1.2			The compliance statement for debug logging entities which implement the DEBUGLOG-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP.
hpicfDebugLogGroups	1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.2
hpicfDebugLogGroup	1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.2.1			A collection of objects representing the configuration parameters for debug logging.
hpicfDebugDestGroups	1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.3
hpicfDebugDestGroup	1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.3.1			A collection of objects representing the configuration parameters for debug destination.
hpicfDebugTimeStampGroups	1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.4
hpicfDebugTimeStampGroup	1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.4.1			An object representing the configuration parameters for debug log time stamp.

RFC description

HP ICF (Intelligent Communications Fabric) vendor-private MIB for debug logging control and diagnostics.

Start monitoring HP ProCurve managed switch (debug logging config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-DEBUGLOG-MIB

What Is HP-ICF-DEBUGLOG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description