HPNSAPCI-MIB

All MIBs › HPNSAPCI-MIB

Category: Domain: Server Hardware, Vendor: HP/HPE

Description: Monitors HP NetServer Agent PCI bus slot inventory and adapter identification on HP ProLiant server platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPNSAPCI-MIB?

HPNSAPCI-MIB is an HP proprietary MIB (HP NetServer Agent PCI) for inventorying the PCI bus and expansion slots on HP ProLiant/NetServer server platforms, identifying installed adapters such as network, storage, or RAID controller cards. No module description or sample objects were captured for this module, so exact object names cannot be confirmed, but MIBs of this family typically expose a table per PCI slot with vendor/device IDs, slot number, and adapter description. Its monitoring value lies in hardware status: detecting whether an expected adapter card is present and recognized in a given slot, useful for confirming server hardware inventory matches expectations after maintenance or for detecting a failed/removed card. It is part of HP's broader server-management MIB family from the Insight Manager era and is generally used alongside other HP NetServer/ProLiant hardware MIBs covering temperature, power, and fan status. It is deployed on legacy HP NetServer and early ProLiant server hardware under HP's server-management agent software. Engineers can download the HPNSAPCI-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPNSAPCI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP NetServer/ProLiant servers (legacy HP server hardware)

Monitoring Examples

No object names were captured in the source data for this MIB, so specific identifiers cannot be confirmed; functionally, a PCI inventory MIB of this type would be polled per-slot to see which adapter (network card, storage controller, RAID card) occupies each PCI bus slot, letting an admin detect a card that failed to enumerate or was physically removed since the last inventory poll.

What Can Be Monitored

PCI slot occupancy
installed adapter card identification
adapter vendor/device ID
PCI bus number/slot number mapping

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hp	1.3.6.1.4.1.11
nm	1.3.6.1.4.1.11.2
hpnsa	1.3.6.1.4.1.11.2.23
hpnsaPci	1.3.6.1.4.1.11.2.23.10
hpnsaPciMibRev	1.3.6.1.4.1.11.2.23.10.1
INT hpnsaPciMibRevMajor	1.3.6.1.4.1.11.2.23.10.1.1	INTEGER	read-only	The major revision level of the MIB.
INT hpnsaPciMibRevMinor	1.3.6.1.4.1.11.2.23.10.1.2	INTEGER	read-only	The minor revision level of the MIB.
hpnsaPciAgent	1.3.6.1.4.1.11.2.23.10.2
hpnsaPciAgentTable	1.3.6.1.4.1.11.2.23.10.2.1		not-accessible	A table of SNMP agents that satisfy requests for this MIB.
hpnsaPciAgentEntry	1.3.6.1.4.1.11.2.23.10.2.1.1		not-accessible	A description of the agent/agents that access PCI information.
INT hpnsaPciAgentIndex	1.3.6.1.4.1.11.2.23.10.2.1.1.1	INTEGER	read-only	A unique index for this agent.
STR hpnsaPciAgentName	1.3.6.1.4.1.11.2.23.10.2.1.1.2	DisplayString	read-only	Name of the agent/agents satisfying SNMP requests for this MIB.
STR hpnsaPciAgentVersion	1.3.6.1.4.1.11.2.23.10.2.1.1.3	DisplayString	read-only	Version number of the agent/agents satisfying SNMP requests for this MIB.
OCT hpnsaPciAgentDate	1.3.6.1.4.1.11.2.23.10.2.1.1.4	OCTET STRING	read-only	The date on which this agent was created. field octets contents range ------------------------------------------------- 1 1 years since 1900 0..255 2 2 month 1..12 3 3 day 1..31 4 4 hour 0..23 5 5 minute 0..59 6 6 second 0..59
hpnsaPciBios	1.3.6.1.4.1.11.2.23.10.3
INT hpnsaPciBiosPresent	1.3.6.1.4.1.11.2.23.10.3.1	INTEGER	read-only	Identifies whether PCI BIOS is present. 0 = not present, 1 = PCI BIOS present.
INT hpnsaPciBiosVersion	1.3.6.1.4.1.11.2.23.10.3.2	INTEGER	read-only	The PCI BIOS version number: low byte = minor version, high byte = major version.
INT hpnsaPciBuses	1.3.6.1.4.1.11.2.23.10.3.3	INTEGER	read-only	Number of PCI buses in the system
hpnsaPciConfig	1.3.6.1.4.1.11.2.23.10.4
hpnsaPciTable	1.3.6.1.4.1.11.2.23.10.4.1		not-accessible	A list of PCI device/functions entries.
hpnsaPciEntry	1.3.6.1.4.1.11.2.23.10.4.1.1		not-accessible	A description of an PCI device/function.
INT hpnsaPciBusIndex	1.3.6.1.4.1.11.2.23.10.4.1.1.1	INTEGER	read-only	The PCI Bus number that this entry describes.
INT hpnsaPciDeviceIndex	1.3.6.1.4.1.11.2.23.10.4.1.1.2	INTEGER	read-only	The PCI device or slot number that this entry describes.
INT hpnsaPciFunctionIndex	1.3.6.1.4.1.11.2.23.10.4.1.1.3	INTEGER	read-only	The PCI function that this entry describes.
INT hpnsaPciVendorId	1.3.6.1.4.1.11.2.23.10.4.1.1.4	INTEGER	read-only	Identifies the manufacturer of the device. 0xFFFF is an invalid value for a vendor ID. Vendor ID Manufacturer --------- ------------ XXXX Hewlett-Packard Co.
INT hpnsaPciDeviceId	1.3.6.1.4.1.11.2.23.10.4.1.1.5	INTEGER	read-only	Identifies the particular device. This identier is allocated by the vendor. Device ID Description --------- ------------ XXXX Blah! Blah!
INT hpnsaPciRevisionId	1.3.6.1.4.1.11.2.23.10.4.1.1.6	INTEGER	read-only	Specifies a device specific revision identifier.
INT hpnsaPciHeaderType	1.3.6.1.4.1.11.2.23.10.4.1.1.7	INTEGER	read-only	Idendifies the layout of bytes 10h-3Fh in configuration space and whether or not the device contains multiple functions. Bit 7: 1=multi-function device, 0=single function Bit 6-0: Defines layout, 0 is only layout defined, all other values are reserved.
OCT hpnsaPciClassCode	1.3.6.1.4.1.11.2.23.10.4.1.1.8	OCTET STRING	read-only	Identifies the generic function of the device. Base Sub- Prog Class Class If. Meaning ----- ----- ----- ------- 00h Device built before Class Code definitions were finalized. 00h 00h All currently implemented devices except VGA compatible devices. 01h 00h VGA compatible device 01h Mass Storage controller 00h 00h SCSI bus controller 01h 00h IDE controller 02h 00h Floppy disk controller 03h 00h IPI bus controller 80h 00h Other mass storage controller 02h Network controller 00h 00h Ethernet controller 01h 00h Token Ring controller 02h 00h FDDI controller 80h 00h Other network controller 03h Display controller 00h 00h VGA compatible controller 01h 00h XGA controller 80h 00h Other display controller 04h Multimedia device 00h 00h Video 01h 00h Audio 80h 00h Other multimedia device 05h Memory controller 00h 00h RAM 01h 00h Flash 80h 00h Other memory controller 06h Bridge device 00h 00h Host bridge 01h 00h ISA bridge 02h 00h EISA bridge 03h 00h MC bridge 04h 00h PCI-to-PCI bridge 05h 00h PCMCIA bridge 80h 00h Other bridge device 07h-FEh Reserved FFh Device does not fit in any defined classes.
INT hpnsaPciCommand	1.3.6.1.4.1.11.2.23.10.4.1.1.9	INTEGER	read-only	Provides course control over a device's ability to generate and respond to PCI cylces. Bit Description --- ------------ 0 IO Space 1 Memory Space 2 Bus Master 3 Special Cycles 4 Memory Write and Invlaidate Enable 5 VGA Palette snoop 6 Parity Error Response 7 Wait cycle control 8 SERR# enable 9 Fast Back-to-Back Enable 10-15 Reserved
INT hpnsaPciStatus	1.3.6.1.4.1.11.2.23.10.4.1.1.10	INTEGER	read-only	Status information for PCI bus related events. Bit Description --- ------------ 0-6 Reserved 7 Fast Back-to-Back Capable 8 Data Parity Detected 9-10 DEVSEL timing; 00=fast, 01=medium, 10=slow 11 Signal Target Abort 12 Received Target Abort 13 Received Master Abort 14 Signaled System Error 15 Detected Parity Error
INT hpnsaPciCacheLineSize	1.3.6.1.4.1.11.2.23.10.4.1.1.11	INTEGER	read-only	Specifies the system cache line size in units of 32-bit words.
INT hpnsaPciLatencyTimer	1.3.6.1.4.1.11.2.23.10.4.1.1.12	INTEGER	read-only	Specifies, in units of PCI bus clocks, the value of the Latency Timer for this PCI bus master.
INT hpnsaPciBist	1.3.6.1.4.1.11.2.23.10.4.1.1.13	INTEGER	read-only	This optional register is used for control and status of Built-in Self Test. Devices that don't support BIST must always return a value of 0. Bit Description --- ------------ 7 0=BIST not supported, 1=BIST supported 6 Wrtie a 1 to invoke BIST. Devices resets the bit when BIST is complet. Software should fail device if BIST is not complete after 2 seconds. 5-4 Reserved 3-0 0=Device passed test, non-zero= device-specific failure code.
INT hpnsaPciInterruptLine	1.3.6.1.4.1.11.2.23.10.4.1.1.14	INTEGER	read-only	Communicates interrupt line routing information. The value in this register tells which input of the system interrupt contoller(s) the device's interrupt pin is connected to.
INT hpnsaPciInterruptPin	1.3.6.1.4.1.11.2.23.10.4.1.1.15	INTEGER	read-only	Tells which interrupt pin the device uses.
INT hpnsaPciMaxLat	1.3.6.1.4.1.11.2.23.10.4.1.1.16	INTEGER	read-only	Specifies how often the device needs to gain access to the PCI bus.
INT hpnsaPciMinGnt	1.3.6.1.4.1.11.2.23.10.4.1.1.17	INTEGER	read-only	Specifies how long a burst period the device needs assuming a clock rate of 33MHz.
OCT hpnsaPciBaseAddrRegs	1.3.6.1.4.1.11.2.23.10.4.1.1.18	OCTET STRING	read-only	Base address mapping registers for memory and IO. Refer to the PCI specification for the format.
OCT hpnsaPciExpRomBaseAddr	1.3.6.1.4.1.11.2.23.10.4.1.1.19	OCTET STRING	read-only	4-byte register is defined to handle the base address and size information for an expansion ROM. Bit Description --- ------------ 31-11 Expansion ROM Base Address (upper 21 bits) 10-1 Reserved 0 0 = address decoding is disabled and no access to this space are allowed. 1 = address decoding enabled.
OCT hpnsaPciDeviceSpecific	1.3.6.1.4.1.11.2.23.10.4.1.1.20	OCTET STRING	read-only	Device specific configuration space.

RFC description

Provides PCI bus configuration and device information for HP network servers.

Start monitoring HP NetServer/ProLiant server (legacy PCI bus/expansion slot inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPNSAPCI-MIB

What Is HPNSAPCI-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description