All MIBs › HPNSAHOTSWAPSUBSYSTEM-MIB › hpnsaHSModuleDeviceStartup
hpnsaHSModuleDeviceStartup
Module: HPNSAHOTSWAPSUBSYSTEM-MIB
OID (symbolic): HPNSAHOTSWAPSUBSYSTEM-MIB::hpnsaHSModuleDeviceStartup
OID (numeric): 1.3.6.1.4.1.11.2.23.20.3.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: State of the Disk Spin Up DIP switch on the Hot Swap Subsystem.
1 = disks spin up with the system after a period of time 2 = disks spin up after receiving SCSI Start Command
What is hpnsaHSModuleDeviceStartup?
This read-only enumerated value reports the state of the Disk Spin Up DIP switch on the module, either at-poweron(1), meaning disks spin up automatically after a delay when powered, or by-start-command(2), meaning disks wait for an explicit SCSI Start Command. An admin uses this to understand whether drives in a cage will come online automatically after a power event or require the controller to issue a start sequence, which affects boot and recovery procedures. For example, a chassis set to by-start-command(2) would need the RAID controller's staggered-spin-up sequence to actually bring drives online after a power cycle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.23.20.3.1.1.5 snmpwalk -v2c -c public <target> HPNSAHOTSWAPSUBSYSTEM-MIB::hpnsaHSModuleDeviceStartup
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.23.20.3.1.1.5.1 snmpget -v2c -c public <target> HPNSAHOTSWAPSUBSYSTEM-MIB::hpnsaHSModuleDeviceStartup.1
Start monitoring HP NetServer platform (hot-swap SCSI subsystem) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPNSAHOTSWAPSUBSYSTEM-MIB::hpnsaHSModuleDeviceStartup OID value, configure state conditions and alerts, and monitor any HP NetServer platform (hot-swap SCSI subsystem) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.23 | hpnsa | HPHOTSWAP2SUBSYSTEM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.23.20 | hpnsaHotSwap | HPNSAHOTSWAPSUBSYSTEM-MIB |
| 1.3.6.1.4.1.11.2.23.20.3 | hpnsaHSModule | HPNSAHOTSWAPSUBSYSTEM-MIB |
| 1.3.6.1.4.1.11.2.23.20.3.1 | hpnsaHSModuleTable | HPNSAHOTSWAPSUBSYSTEM-MIB |
| 1.3.6.1.4.1.11.2.23.20.3.1.1 | hpnsaHSModuleEntry | HPNSAHOTSWAPSUBSYSTEM-MIB |
| 1.3.6.1.4.1.11.2.23.20.3.1.1.5 | hpnsaHSModuleDeviceStartup | HPNSAHOTSWAPSUBSYSTEM-MIB |