HPNSAECC-MIB

All MIBs › HPNSAECC-MIB

Category: Domain: Server Hardware, Vendor: HP/HPE

Description: Monitors HP NetServer Agent ECC memory error detection and correction counters on HP ProLiant server platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPNSAECC-MIB?

HPNSAECC-MIB is a proprietary HP NetServer Agent module from the same HP ProLiant/NetServer hardware-management agent family as HPNSADIMM-MIB, focused specifically on the ECC (Error-Correcting Code) memory subsystem. It exposes counters and status for correctable and uncorrectable memory errors detected by the server's ECC logic, generally organized per memory bank or module. Its monitoring value lies squarely in hardware health: rising correctable-error counts are an early warning of a degrading DIMM, while any uncorrectable error indicates an active fault that can crash the server, so this MIB is a key input for proactive memory-fault detection alongside overall server uptime protection. It complements HPNSADIMM-MIB, which supplies the physical slot inventory that these error counters map onto. It is deployed in legacy HP NetServer and early ProLiant environments running the HP Insight/NetServer Agent for hardware fault monitoring. Engineers can download the HPNSAECC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPNSAECC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP NetServer
HP ProLiant server

Monitoring Examples

An admin would poll per-bank correctable and uncorrectable ECC error counters (a table modeled like eccErrorTable/eccErrorEntry) on a scheduled basis and alert when the correctable-error counter increments faster than a baseline rate, signalling a DIMM approaching failure. A nonzero uncorrectable-error count would be treated as a critical event requiring immediate DIMM replacement. No sample objects were supplied for this module, so exact object names are inferred rather than confirmed from source.

What Can Be Monitored

correctable ECC error count
uncorrectable ECC error count
per-bank memory error rate
memory fault status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hp	1.3.6.1.4.1.11
nm	1.3.6.1.4.1.11.2
hpnsa	1.3.6.1.4.1.11.2.23
hpnsaECC	1.3.6.1.4.1.11.2.23.6
NTF hpnsaEccErrorCorrected	1.3.6.1.4.1.11.2.23.6.0.4353			An ECC single-bit error has been corrected in one of the memory modules
NTF hpnsaEccSBEOverflow	1.3.6.1.4.1.11.2.23.6.0.4354			Error logging for ECC single-bit errors has been disabled due to too many SBE's detected in a short time period
NTF hpnsaEccMemoryResize	1.3.6.1.4.1.11.2.23.6.0.4355			ECC Memory size has been adjusted during the Power-On-Self-Test during the last boot due to a failed memory module
NTF hpnsaEccMultiBitError	1.3.6.1.4.1.11.2.23.6.0.4357			An ECC double-bit error has occurred in one of the memory modules
NTF hpnsaEccMultiBitErrorOverflow	1.3.6.1.4.1.11.2.23.6.0.4358			Error logging for ECC multiple-bit errors has been disabled due to too many MBE's detected in a short time period
hpnsaEccMibRev	1.3.6.1.4.1.11.2.23.6.1
INT hpnsaEccMibRevMajor	1.3.6.1.4.1.11.2.23.6.1.1	INTEGER	read-only	The major revision level of the MIB.
INT hpnsaEccMibRevMinor	1.3.6.1.4.1.11.2.23.6.1.2	INTEGER	read-only	The minor revision level of the MIB.
hpnsaEccAgent	1.3.6.1.4.1.11.2.23.6.2
hpnsaEccAgentTable	1.3.6.1.4.1.11.2.23.6.2.1		not-accessible	A table of SNMP Agents that satisfy requests for this MIB.
hpnsaEccAgentEntry	1.3.6.1.4.1.11.2.23.6.2.1.1		not-accessible	A description of the agents that access ECC Memory related information.
INT hpnsaEccAgentIndex	1.3.6.1.4.1.11.2.23.6.2.1.1.1	INTEGER	read-only	A unique index for this module description.
STR hpnsaEccAgentName	1.3.6.1.4.1.11.2.23.6.2.1.1.2	DisplayString	read-only	Name of the Agent/Agents satisfying SNMP requests for this MIB.
STR hpnsaEccAgentVersion	1.3.6.1.4.1.11.2.23.6.2.1.1.3	DisplayString	read-only	Version number of the Agent/Agents satisfying SNMP requests for this MIB.
OCT hpnsaEccAgentDate	1.3.6.1.4.1.11.2.23.6.2.1.1.4	OCTET STRING	read-only	The date on which this Agent was created. field octets contents range _________________________________________________ 1 1 years since 1900 0..255 2 2 month 1..12 3 3 day 1..31 4 4 hour 0..23 5 5 minute 0..59 6 6 second 0..59
hpnsaEccLog	1.3.6.1.4.1.11.2.23.6.3
INT hpnsaEccStatus	1.3.6.1.4.1.11.2.23.6.3.1	INTEGER	read-only	ECC memory system tracking status: 1 - ECC memory is not supported in this machine 2 - ECC memory logging is disabled due to some errors (example, too many single or multiple bits error occurred in a short period of time) 3 - ECC memory logging is enabled and functioning.
INT hpnsaEccEraseLog	1.3.6.1.4.1.11.2.23.6.3.2	INTEGER	read-write	Set this variable to integer value 1234 and without changing it again before hpnsaEccPollTime expired, will erase the system's Log area.
INT hpnsaEccTotalErrCorrected	1.3.6.1.4.1.11.2.23.6.3.3	INTEGER	read-only	Total number of ECC memory error had occurred and been corrected.
INT hpnsaEccTrapEnable	1.3.6.1.4.1.11.2.23.6.3.4	INTEGER	read-write	Set this variable to 1, the ECC memory errors are forwarded as SNMP traps. No trap are generated if this variable is set to 0.
INT hpnsaEccTrapDelay	1.3.6.1.4.1.11.2.23.6.3.5	INTEGER	read-write	Delay in milliseconds between the sending of ECC traps.
INT hpnsaEccPollTime	1.3.6.1.4.1.11.2.23.6.3.6	INTEGER	read-write	Seconds between checking of ECC memory error.
hpnsaEccMemErrTable	1.3.6.1.4.1.11.2.23.6.3.7		not-accessible	A table of ECC memory error descriptions.
hpnsaEccMemErrEntry	1.3.6.1.4.1.11.2.23.6.3.7.1		not-accessible	ECC memory error description.
INT hpnsaEccMemErrIndex	1.3.6.1.4.1.11.2.23.6.3.7.1.1	INTEGER	read-only	A unique index for the ECC memory error log.
STR hpnsaEccMemErrTime	1.3.6.1.4.1.11.2.23.6.3.7.1.2	DisplayString	read-only	The Server local time when the ECC memory error occurred.
STR hpnsaEccMemErrDesc	1.3.6.1.4.1.11.2.23.6.3.7.1.3	DisplayString	read-only	A string indicating the SIMM location when ECC memory error occurred.

RFC description

Monitors Hewlett-Packard system ECC memory errors and correction events in enterprise servers.

Start monitoring HP NetServer/ProLiant server (legacy ECC memory error counters) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPNSAECC-MIB

What Is HPNSAECC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description