HPN-ICF-VOICE-DIAL-CONTROL-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HPN-ICF-VOICE-DIAL-CONTROL-MIB

Last Updated: 2009-04-16

Category: Domain: VoIP/Telephony, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages voice dial-peer routing rules and POTS/VoIP trunk configuration on HP/Comware gateways.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-VOICE-DIAL-CONTROL-MIB?

HPN-ICF-VOICE-DIAL-CONTROL-MIB is an HP/H3C Comware proprietary MIB for voice gateway configuration, covering the creation and management of dial-peer "voice entities" that define POTS and VoIP trunk routing rules. It exposes tables for creating voice entities (POTS vs. VoIP type) and for their common configuration, including up to three codec preferences per entity. This is primarily a configuration MIB, but it supports monitoring software status in that polling entity row status and codec settings reveals whether a dial-peer is active/provisioned correctly and which codecs a call will actually negotiate, helping diagnose call-quality or call-failure issues traced to codec mismatch. It typically works alongside standard interface and voice-port MIBs, since dial-peers reference physical or logical voice interfaces elsewhere on the gateway. It is deployed on HP/H3C Comware voice gateway routers providing PBX/PSTN-to-VoIP interworking in enterprise telephony deployments. Network engineers evaluating or troubleshooting this functionality can download the HPN-ICF-VOICE-DIAL-CONTROL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-VOICE-DIAL-CONTROL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • HP/H3C Comware voice gateway routers

Monitoring Examples

An admin enumerates hpnicfVoEntityCreateTable to list configured dial-peers by hpnicfVoEntityIndex, checking hpnicfVoEntityType (POTS or VoIP) and hpnicfVoEntityRowStatus to confirm each entity is active. hpnicfVoEntityCommonConfigTable is polled via hpnicfVoEntityCfgIndex to inspect hpnicfVoEntityCfgCodec1st/2nd/3rd, revealing whether a call is failing because the preferred codec isn't supported end-to-end.

What Can Be Monitored

  • configured dial-peer/voice entities
  • entity type (POTS/VoIP)
  • entity row/provisioning status
  • codec preference order per entity
Imported Objects

From DIAL-CONTROL-MIB

AbsoluteCounter32

From HPN-ICF-OID-MIB

hpnicfVoiceOBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue
OIDs

RFC description

HP/Arista-private MIB for voice dial control and call signaling on ICF devices.

Start monitoring HP/H3C Comware voice gateway router (dial-peer/codec call routing config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-VOICE-DIAL-CONTROL-MIB