HPHOTSWAP2SUBSYSTEM-MIB

All MIBs › HPHOTSWAP2SUBSYSTEM-MIB

Category: Domain: Server Hardware, Domain: Server/Host Monitoring, Hardware and Environment, Vendor: HP/HPE

Description: HP SNMP MIB for hot-swap subsystem management monitoring hot-pluggable component state and status in HP server systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPHOTSWAP2SUBSYSTEM-MIB?

HPHOTSWAP2SUBSYSTEM-MIB is a Compaq/HP proprietary MIB (enterprise OID 11) reporting hot-swap SCSI cage subsystem status on Compaq/HP server hardware. Its cage table, keyed by cage index, reports 12V power presence, terminator status for two positions, and SCSI cable presence for two cable slots, alongside a MIB-revision pair. As a hardware-status MIB it lets an administrator confirm a hot-swap drive cage's power, termination, and cabling are all correctly in place before or after a hot-swap drive-replacement operation. It is deployed on Compaq/HP servers with hot-swappable SCSI drive cages. Engineers can download the HPHOTSWAP2SUBSYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPHOTSWAP2SUBSYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Compaq/HP servers with hot-swappable SCSI drive cages

Monitoring Examples

A technician checks hpnsaHS2Cage12VPower and both terminator/cable status objects for a cage before performing a hot-swap drive replacement, to confirm the cage's power and cabling are healthy beforehand.

What Can Be Monitored

cage power presence, terminator status, and SCSI cable presence

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hp	1.3.6.1.4.1.11
nm	1.3.6.1.4.1.11.2
hpnsa	1.3.6.1.4.1.11.2.23
hpnsaHotswap2	1.3.6.1.4.1.11.2.23.27
hpnsaHS2MibRev	1.3.6.1.4.1.11.2.23.27.1
INT hpnsaHS2MibRevMajor	1.3.6.1.4.1.11.2.23.27.1.1	INTEGER	read-only	The major revision level of the MIB.
INT hpnsaHS2MibRevMinor	1.3.6.1.4.1.11.2.23.27.1.2	INTEGER	read-only	The minor revision level of the MIB.
hpnsaHS2Cage	1.3.6.1.4.1.11.2.23.27.2
hpnsaHS2CageTable	1.3.6.1.4.1.11.2.23.27.2.1		not-accessible	A table of Hotswap 2 Subsystem cage information entries.
hpnsaHS2CageEntry	1.3.6.1.4.1.11.2.23.27.2.1.1		not-accessible	Hotswap 2 Subsystem cage information.
INT hpnsaHS2CageIndex	1.3.6.1.4.1.11.2.23.27.2.1.1.1	INTEGER	read-only	A unique index for the Hotswap 2 Cage.
INT hpnsaHS2Cage12VPower	1.3.6.1.4.1.11.2.23.27.2.1.1.2	INTEGER	read-only	The current state of the 12V DC power.
INT hpnsaHS2CageTerminator1	1.3.6.1.4.1.11.2.23.27.2.1.1.3	INTEGER	read-only	The current state of Terminator 1.
INT hpnsaHS2CageTerminator2	1.3.6.1.4.1.11.2.23.27.2.1.1.4	INTEGER	read-only	The current state of Terminator 2.
INT hpnsaHS2CageSCSICable1	1.3.6.1.4.1.11.2.23.27.2.1.1.5	INTEGER	read-only	The current state of SCSI Cable 1.
INT hpnsaHS2CageSCSICable2	1.3.6.1.4.1.11.2.23.27.2.1.1.6	INTEGER	read-only	The current state of SCSI Cable 2.
INT hpnsaHS2CageBaseSCSIAddress	1.3.6.1.4.1.11.2.23.27.2.1.1.7	INTEGER	read-write	The base SCSI address of this cage.
INT hpnsaHS2CageTemperature	1.3.6.1.4.1.11.2.23.27.2.1.1.8	INTEGER	read-only	The current temperature reading for the temperature sensor (in celcius).
INT hpnsaHS2CageTemperatureWarningThreshold	1.3.6.1.4.1.11.2.23.27.2.1.1.9	INTEGER	read-write	The warning threshold for the temperature sensor (in celsius).
INT hpnsaHS2CageTemperatureAlertThreshold	1.3.6.1.4.1.11.2.23.27.2.1.1.10	INTEGER	read-write	The alert threshold for the temperature sensor (in celsius).
OCT hpnsaHS2CageManagementBoardFRU	1.3.6.1.4.1.11.2.23.27.2.1.1.11	OCTET STRING	read-only	The Field Replaceable Unit (FRU) Management Board information.
OCT hpnsaHS2CageInterconnectFRU	1.3.6.1.4.1.11.2.23.27.2.1.1.12	OCTET STRING	read-only	The Field Replaceable Unit (FRU) Interconnect Board information.
INT hpnsaHS2CageFirmwareMajorRev	1.3.6.1.4.1.11.2.23.27.2.1.1.13	INTEGER	read-only	The major firmware revision of the Management Board.
INT hpnsaHS2CageFirmwareMinorRev	1.3.6.1.4.1.11.2.23.27.2.1.1.14	INTEGER	read-only	The minor firmware revision of the Management Board.
hpnsaHS2Slot	1.3.6.1.4.1.11.2.23.27.3
hpnsaHS2SlotTable	1.3.6.1.4.1.11.2.23.27.3.1		not-accessible	A table of Hotswap 2 Subsystem Slot information entries.
hpnsaHS2SlotEntry	1.3.6.1.4.1.11.2.23.27.3.1.1		not-accessible	Hotswap 2 Subsystem Slot information.
INT hpnsaHS2SlotCageIndex	1.3.6.1.4.1.11.2.23.27.3.1.1.1	INTEGER	read-only	A unique index for the Hotswap 2 cage.
INT hpnsaHS2SlotIndex	1.3.6.1.4.1.11.2.23.27.3.1.1.2	INTEGER	read-only	Physical slot number in the Hotswap 2 cage.
INT hpnsaHS2DrivePresent	1.3.6.1.4.1.11.2.23.27.3.1.1.3	INTEGER	read-only	Defines whether there is a drive present in this slot.
INT hpnsaHS2DriveSCSIBusType	1.3.6.1.4.1.11.2.23.27.3.1.1.4	INTEGER	read-only	The SCSI Bus type with which this drive is attached.
INT hpnsaHS2DriveIdentify	1.3.6.1.4.1.11.2.23.27.3.1.1.5	INTEGER	read-write	Select or unselect a drive to provide a visual indicator signal for user to locate drive.

RFC description

Monitors HP hotswap storage subsystems including cage status, slot information, temperature, power, and firmware for SCSI disk configurations.

Start monitoring Compaq/HP server with hot-swappable SCSI drive cage with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPHOTSWAP2SUBSYSTEM-MIB

What Is HPHOTSWAP2SUBSYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description