HPN-ICF-POSA-MIB

All MIBs › HPN-ICF-POSA-MIB

Last Updated: 2014-05-29

Category: Domain: WAN/TDM, Protocol: PPP, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages PPP over SONET/SDH (POS-A) interface encapsulation and framing on HP/Comware WAN routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-POSA-MIB?

HPN-ICF-POSA-MIB is an H3C/HPE Networking (ICF) proprietary MIB implementing POSA (Point-of-Sale Access), which manages persistent financial-transaction connections between POS terminals and an FCM (Front-end Communication Module)/acquiring host. Its objects cover server-enable flag, FCM answer/trade/idle timeouts, trap enables for server/app-state changes, terminal hang-up, and FCM link/physical negotiation failures, TCP/FCM connection counts and thresholds with trap enables, TCP trade limit/timeout with trap enable, and an application table (ID, service type, ifIndex, mode, host IP type). As a configuration/status MIB it lets an administrator confirm POS-terminal connection counts against configured thresholds and watch for negotiation-failure/hang-up alerts. It is deployed on H3C/HPE Networking (ICF-based) devices running POSA. Engineers can download the HPN-ICF-POSA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-POSA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/HPE Networking (ICF-based) devices (POSA)

Monitoring Examples

An administrator monitors hpnicfPosaTcpConnectionNumber against hpnicfPosaTcpConnectionThreshold to catch approaching POS-terminal connection capacity on an H3C/HPE ICF device.

What Can Be Monitored

POS terminal connection counts vs. thresholds and negotiation failures

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfPosaFcmStatTimeoutCnts OID:

Select an H3C/HPE Networking (ICF-based) device (POS terminal-to-acquiring-host relay) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfPosaFcmStatTimeoutCnts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of disconnections because of trade timeouts. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfPosa	1.3.6.1.4.1.11.2.14.11.15.2.92			This MIB is to provide the definition of the POSA (Point Of Sale Access) system.
hpnicfPosaControl	1.3.6.1.4.1.11.2.14.11.15.2.92.1
INT hpnicfPosaServerEnable	1.3.6.1.4.1.11.2.14.11.15.2.92.1.1	INTEGER	read-write	This attribute controls the starting or stoppage of POS access function. The defalut value is disabled(1).
I32 hpnicfPosaFcmAnswerTimeout	1.3.6.1.4.1.11.2.14.11.15.2.92.1.2	Integer32	read-write	The maximum answer time of a POS connection through a FCM (Fast Connection Modem) interface. The answer time is the interval from the POS terminal sending request to the Router giving its reply, in units of milliseconds.
I32 hpnicfPosaFcmTradeTimeout	1.3.6.1.4.1.11.2.14.11.15.2.92.1.3	Integer32	read-write	The maximum time of a POS trade through a FCM interface, in units of milliseconds.
I32 hpnicfPosaFcmIdleTimeout	1.3.6.1.4.1.11.2.14.11.15.2.92.1.4	Integer32	read-write	The maximum idle time of a POS connection through the FCM interface, in units of seconds.
T/F hpnicfPosaSrvStateChangeTrapEnable	1.3.6.1.4.1.11.2.14.11.15.2.92.1.5	TruthValue	read-write	This attribute controls whether the hpnicfPosaServerStatusChange trap will be sent or not.
T/F hpnicfPosaAppStateChangeTrapEnable	1.3.6.1.4.1.11.2.14.11.15.2.92.1.6	TruthValue	read-write	This attribute controls whether the hpnicfPosaAppStateChange trap will be sent or not.
T/F hpnicfPosaTerminalHangUpTrapEnable	1.3.6.1.4.1.11.2.14.11.15.2.92.1.7	TruthValue	read-write	This attribute controls whether the hpnicfPosaTerminalHangUp trap will be sent or not.
T/F hpnicfPosaFcmLnkNegoFailTrapEnable	1.3.6.1.4.1.11.2.14.11.15.2.92.1.8	TruthValue	read-write	This attribute controls whether the hpnicfPosaFcmLinkNegoFailed trap will be sent or not.
T/F hpnicfPosaFcmPhyNegoFailTrapEnable	1.3.6.1.4.1.11.2.14.11.15.2.92.1.9	TruthValue	read-write	This attribute controls whether the hpnicfPosaFcmPhyNegoFailed trap will be sent or not.
I32 hpnicfPosaTcpConnectionNumber	1.3.6.1.4.1.11.2.14.11.15.2.92.1.10	Integer32	read-only	The current number of TCP connections.
I32 hpnicfPosaFcmConnectionNumber	1.3.6.1.4.1.11.2.14.11.15.2.92.1.11	Integer32	read-only	The current number of FCM connections.
I32 hpnicfPosaTcpConnectionThreshold	1.3.6.1.4.1.11.2.14.11.15.2.92.1.12	Integer32	read-write	The threshold of TCP connections.
I32 hpnicfPosaFcmConnectionThreshold	1.3.6.1.4.1.11.2.14.11.15.2.92.1.13	Integer32	read-write	The threshold of FCM connections.
T/F hpnicfPosaTcpConnectionTrapEnable	1.3.6.1.4.1.11.2.14.11.15.2.92.1.14	TruthValue	read-write	This attribute specifies the threshold that must be exceeded to send the hpnicfPosaTcpConnectionExceed trap.
T/F hpnicfPosaFcmConnectionTrapEnable	1.3.6.1.4.1.11.2.14.11.15.2.92.1.15	TruthValue	read-write	This attribute specifies the threshold that must be exceeded to send the hpnicfPosaFcmConnectionExceed trap.
I32 hpnicfPosaTcpTradeLimit	1.3.6.1.4.1.11.2.14.11.15.2.92.1.16	Integer32	read-write	The limit of concurrent trades in one TCP connection. The value 0 means unlimited.
T/F hpnicfPosaTcpTradeTrapEnable	1.3.6.1.4.1.11.2.14.11.15.2.92.1.17	TruthValue	read-write	This attribute specifies the limit that must be exceeded to send the hpnicfPosaTcpTradeExceed trap.
I32 hpnicfPosaTcpTradeTimeout	1.3.6.1.4.1.11.2.14.11.15.2.92.1.18	Integer32	read-write	The maximum interval to wait for the reply from sending the trade packet to the application server. The value 0 means wait forever.
hpnicfPosaTables	1.3.6.1.4.1.11.2.14.11.15.2.92.2
hpnicfPosaAppTable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1		not-accessible	This table shows the configuration information and running status of POS application.
hpnicfPosaAppEntry	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1		not-accessible	This table shows the configuration information and running status of POS application.
I32 hpnicfPosaAppID	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.1	Integer32	accessible-for-notify	The identification of a POS application.
HPN hpnicfPosaAppServiceType	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.2	HpnicfAppServiceType	read-create	The service type of a POS application. It means the way in which the router connects with the application server.
I32 hpnicfPosaAppIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.3	Integer32	read-create	This attribute is the ifindex through which the router connecting with the application server, if the service type of POS application is flow(2). It is invalid if the service type is tcp(1). At preasent, it supports 5 types of interface: FCM, SERIAL, ASYNC, AM (Analog Modem) and AUX.
HPN hpnicfPosaAppMode	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.4	HpnicfAppMode	read-create	The work mode of a POS application.
IPt hpnicfPosaAppHostIPType	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.5	InetAddressType	read-create	The IP address type of the application server. And now it must be IPV4. It is invalid if the service type is flow(2).
IP hpnicfPosaAppHostIP	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.6	InetAddress	read-create	The IP address of the application server. And now it only supports IPV4. It is invalid if the service type is flow(2).
I32 hpnicfPosaAppHostPort	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.7	Integer32	read-create	The listening port of the application server. If the information of the application server is not specified, this object will return the value 0. It is invalid if the service type is flow(2).
IPt hpnicfPosaAppRouterIPType	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.8	InetAddressType	read-create	The source IP address type of the access router. Now it must be ipv4. It is invalid if the service type is flow(2).
IP hpnicfPosaAppRouterIP	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.9	InetAddress	read-create	The source IP address of access router used in connecting with application server. Now it only supports ipv4. It is invalid if the service type is flow(2).
I32 hpnicfPosaAppKeepAliveInterval	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.10	Integer32	read-create	The TCP keep alive interval of the connection between the router and the application server. In unit of seconds. The default value is 2 seconds. It is valid only when the service type is tcp(1).
I32 hpnicfPosaAppKeepAliveCount	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.11	Integer32	read-create	The maximum number of sending TCP keep alive packets. It is valid only when the service type is tcp(1).
I32 hpnicfPosaAppConnectTimeout	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.12	Integer32	read-create	The maximum interval that the router waits for the reply from application server after sending the request for establishing a TCP connection. It is invalid if the service type is flow(2).
HPN hpnicfPosaAppState	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.13	HpnicfPeerState	read-only	The current running state of application server.
ROW hpnicfPosaAppRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.14	RowStatus	read-create	Operation status.
OCT hpnicfPosaAppName	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.15	OCTET STRING	read-create	The description of a POS application.
T/F hpnicfPosaCallerIDTransEnable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.16	TruthValue	read-create	Enable or disable the caller-id transmission function.
HPN hpnicfPosaTpduChangeStrategy	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.17	HpnicfTpduChangeStrategy	read-create	Set the strategy to modify the address of the packet from terminals before delivering it to application server.
I32 hpnicfPosaBackupAppID	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.18	Integer32	read-create	Specify the backup application ID, 0 indicates not using backup application. It is invalid if the service type is flow(2).
I32 hpnicfPosaQuietTimeOut	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.19	Integer32	read-create	Specify the wait time for re-activating application server. It is invalid if the service type is flow(2).
T/F hpnicfPosaAppHello	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.20	TruthValue	read-create	Specify the switch of hello packet for the application server.
I32 hpnicfPosaAppHelloInterval	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.21	Integer32	read-create	Specify the interval time in minute(s) of hello packet.
I32 hpnicfPosaAppRouterPort	1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.22	Integer32	read-create	The source port of access router used in connecting with application server. 0 indicates not to specify the source port. It is valid only if the service type is tcp(1) and mode is normal(1).
hpnicfPosaTerminalTable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2		not-accessible	This table shows the configuration information and running status of POS terminal.
hpnicfPosaTerminalEntry	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1		not-accessible	This table shows the configuration information and running status of POS terminal.
I32 hpnicfPosaTerminalID	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.1	Integer32	accessible-for-notify	The identification of a POS terminal.
HPN hpnicfPosaTerminalAccessType	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.2	HpnicfTerminalAccessType	read-create	The access type of a POS terminal.
I32 hpnicfPosaTerminalIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.3	Integer32	read-create	The ifindex of the interface through which connects the POS terminal and the router. It is invalid if the access type is TCP.
I32 hpnicfPosaTerminalTransAppID	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.4	Integer32	read-create	The identification of the application server to which all the packets from this POS terminal will be sent. If this object is set to 0, the destination application server to which a packet from this POS terminal will be sent is determined by its TPDU (Transport Protocol Data Unit) destination address. It is invalid if the access type is TCP.
I32 hpnicfPosaTerminalListenPort	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.5	Integer32	read-create	The listening port accepting the connection from POS terminals. It is valid only when the access type is TCP.
HPN hpnicfPosaTerminalState	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.6	HpnicfPeerState	read-only	The current running status of a POS terminal.
ROW hpnicfPosaTerminalRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.7	RowStatus	read-create	Operation status.
OCT hpnicfPosaTerminalName	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.8	OCTET STRING	read-create	The description of a POS terminal.
I32 hpnicfPosaTerminalCfgIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.9	Integer32	read-only	The ifindex of the interface on which the terminal configuration is. If it is a physical interface, its value is equal to that of hpnicfPosaTerminalIfIndex.
hpnicfPosaMapTable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.3		not-accessible	This table describe the application-mapping information.
hpnicfPosaMapEntry	1.3.6.1.4.1.11.2.14.11.15.2.92.2.3.1		not-accessible	This table describe the application-mapping information.
OCT hpnicfPosaMapDestCode	1.3.6.1.4.1.11.2.14.11.15.2.92.2.3.1.1	OCTET STRING	not-accessible	The destination code of the mapping item. Generally, the destination code is a 4-character-string. If the destination address in POS packet matches the code, the packet will be deliveried to the corresponding application server. If any code can not be matched, the packet will be deliveried to the default server. A special destination code, 'default', is for default mapping item.
I32 hpnicfPosaMapAppID	1.3.6.1.4.1.11.2.14.11.15.2.92.2.3.1.2	Integer32	read-create	The identifier of POS application. It is the index of hpnicfPosaAppTable.
ROW hpnicfPosaMapRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.92.2.3.1.3	RowStatus	read-create	Operation status.
OCT hpnicfPosaMapSrcCode	1.3.6.1.4.1.11.2.14.11.15.2.92.2.3.1.4	OCTET STRING	not-accessible	The source code of the mapping item. Generally, the source code is a 4-character-string. If the source address in POS packet matches the code, the packet will be deliveried to the corresponding application server. If any code can not be matched, the packet will be deliveried to the default server. A special source code, 'default', is for default mapping item.
hpnicfPosaFcmStatTable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.4		not-accessible	This table shows the statistics information of FCM interface.
hpnicfPosaFcmStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1		not-accessible	This table shows the statistics information of FCM interface.
I32 hpnicfPosaFcmStatIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.1	Integer32	not-accessible	The index of FCM interface.
C32 hpnicfPosaFcmStatTimeoutCntsEx	1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.2	Counter32	read-only	The number of disconnections because of trade timeouts.
C32 hpnicfPosaFcmStatConnectFailCnts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.3	Counter32	read-only	The number of connection failures because of unsuccessful negotiations.
G32 hpnicfPosaFcmStatTransCnts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.4	Gauge32	read-only	The number of all transactions made through the interface.
G32 hpnicfPosaFcmStatTransSuccessCnts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.5	Gauge32	read-only	The number of successful transactions made through the interface.
T/F hpnicfPosaFcmStatTransCntsClear	1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.6	TruthValue	read-write	Clear the number of successful transactions and all transactions.
hpnicfPosaAppStatTable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.5		not-accessible	This table shows the statistics information of application.
hpnicfPosaAppStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1		not-accessible	This table shows the statistics information of application.
C32 hpnicfPosaAppRecvPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.1	Counter32	read-only	The number of packets recieved from the application server.
C32 hpnicfPosaAppSendPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.2	Counter32	read-only	The number of packets sent to the application server.
C32 hpnicfPosaAppErrPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.3	Counter32	read-only	The number of inbound packets that contained errors.
C32 hpnicfPosaAppDistributeErrCnts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.4	Counter32	read-only	The number of packets that are discarded when no corresponding POS terminal can be found.
C32 hpnicfPosaAppInDiscardedPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.5	Counter32	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C32 hpnicfPosaAppOutDiscardedPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.6	Counter32	read-only	The number of outbound packets that are discarded because of link errors between the router and the application server.
hpnicfPosaTerminalStatTable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.6		not-accessible	This table shows the statistics information of application.
hpnicfPosaTerminalStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1		not-accessible	This table shows the statistics information of application.
C32 hpnicfPosaTerminalRecvPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.1	Counter32	read-only	The number of packets recieved from the POS terminal.
C32 hpnicfPosaTerminalSendPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.2	Counter32	read-only	The number of packets sent to the POS terminal.
C32 hpnicfPosaTerminalErrPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.3	Counter32	read-only	The number of inbound packets that contained errors.
C32 hpnicfPosaTerminalMapErrCnts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.4	Counter32	read-only	The number of packets that are discarded because of mapping errors.
C32 hpnicfPosaTerminalInDiscardedPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.5	Counter32	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C32 hpnicfPosaTerminalOutDiscardedPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.6	Counter32	read-only	The number of outbound packets that are discarded because of link errors between the router and the POS terminal.
hpnicfPosaBatchTerminalTable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.7		not-accessible	The table of the configuration information relevant to a batch of POS terminals.
hpnicfPosaBatchTerminalEntry	1.3.6.1.4.1.11.2.14.11.15.2.92.2.7.1		not-accessible	The configuration information relevant to a batch of POS terminals.
I32 hpnicfPosaBatchTerminalFirstID	1.3.6.1.4.1.11.2.14.11.15.2.92.2.7.1.1	Integer32	read-create	The first ID of the batch of POS terminals.
ROW hpnicfPosaBatchTerminalRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.92.2.7.1.2	RowStatus	read-create	Operation status.
hpnicfPosaTcpTermStatTable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8		not-accessible	This table shows the statistics information of terminal whose access type is tcp.
hpnicfPosaTcpTermStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1		not-accessible	This table shows the statistics information of terminal whose access type is tcp.
I32 hpnicfPosaTcpTermStatIndex	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.1	Integer32	not-accessible	The index of entity.
IPt hpnicfPosaTcpTermStatIPType	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.2	InetAddressType	read-create	The type of Internet address. And now it must be ipv4.
IP hpnicfPosaTcpTermStatIP	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.3	InetAddress	read-create	The IP address or the subnet of the statistics terminal(s). When the vlaue is a subnet, the statistics of all the terminals in the subnet will be added up. And now it only supports ipv4.
IP hpnicfPosaTcpTermStatIPMask	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.4	InetAddress	read-create	The mask associated with the IP address or the subnet. And now it only supports ipv4.
C64 hpnicfPosaTcpTermRecvPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.5	Counter64	read-only	The number of packets recieved from the POS terminal(s).
C64 hpnicfPosaTcpTermSendPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.6	Counter64	read-only	The number of packets sent to the POS terminal(s).
C64 hpnicfPosaTcpTermErrPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.7	Counter64	read-only	The number of inbound packets that contained errors.
C64 hpnicfPosaTcpTermMapErrCnts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.8	Counter64	read-only	The number of packets that are discarded because of mapping errors.
C64 hpnicfPosaTcpTermInDiscardedPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.9	Counter64	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C64 hpnicfPosaTcpTermOutDiscardedPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.10	Counter64	read-only	The number of outbound packets that are discarded because of link errors between the router and the POS terminal(s).
ROW hpnicfPosaTcpTermStatRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.11	RowStatus	read-create	Operation status.
hpnicfPosaFcmConfTable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.9		not-accessible	This table shows the configuration information of FCM (Fast Connection Modem) interfaces.
hpnicfPosaFcmConfEntry	1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1		not-accessible	This entry shows the configuration information of FCM (Fast Connection Modem) interfaces.
I32 hpnicfPosaFcmNegoHookOff	1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.1	Integer32	read-write	Delay time for hookoff.
I32 hpnicfPosaFcmNegoSilence	1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.2	Integer32	read-write	Silence time for modem negotiation.
I32 hpnicfPosaFcmNegoScrmbBinary1	1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.3	Integer32	read-write	Scramble-binary1 time for modem negotiation.
I32 hpnicfPosaFcmNegoUnscrmbBinary1	1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.4	Integer32	read-write	Unscramble-binary1 time for modem negotiation.
I32 hpnicfPosaFcmThresholdRlsdOff	1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.5	Integer32	read-write	RLSD (Received Line Signal Detect) off threshold for modem.
I32 hpnicfPosaFcmThresholdRlsdOn	1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.6	Integer32	read-write	RLSD (Received Line Signal Detect) on threshold for modem.
I32 hpnicfPosaFcmThresholdTxPower	1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.7	Integer32	read-write	TX power for modem.
I32 hpnicfPosaFcmThresholdAnswerTone	1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.8	Integer32	read-write	Answer tone level for modem.
hpnicfPosaCallerStatTable	1.3.6.1.4.1.11.2.14.11.15.2.92.2.10		not-accessible	This table shows the statistics information of terminal according the caller-ID.
hpnicfPosaCallerStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1		not-accessible	This table shows the statistics information of terminal according the caller-ID.
OCT hpnicfPosaCallerStatCallerID	1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.1	OCTET STRING	not-accessible	The caller number.
C64 hpnicfPosaCallerRecvPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.2	Counter64	read-only	The number of packets recieved from the POS terminal(s).
C64 hpnicfPosaCallerSendPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.3	Counter64	read-only	The number of packets sent to the POS terminal(s).
C64 hpnicfPosaCallerErrPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.4	Counter64	read-only	The number of inbound packets that contained errors.
C64 hpnicfPosaCallerMapErrCnts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.5	Counter64	read-only	The number of packets that are discarded because of mapping errors.
C64 hpnicfPosaCallerInDiscardedPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.6	Counter64	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C64 hpnicfPosaCallerOutDiscardedPkts	1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.7	Counter64	read-only	The number of outbound packets that are discarded because of link errors between the router and the POS terminal(s).
ROW hpnicfPosaCallerStatRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.8	RowStatus	read-create	Operation status.
hpnicfPosaTrap	1.3.6.1.4.1.11.2.14.11.15.2.92.3
hpnicfPosaTrapPrex	1.3.6.1.4.1.11.2.14.11.15.2.92.3.0
NTF hpnicfPosaServerStatusChange	1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.1			This trap is generated when the POS function is started or stopped.
NTF hpnicfPosaAppStateChange	1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.2			This trap is generated whenever the availability of application server changes.
NTF hpnicfPosaTerminalHangUp	1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.3			This trap is generated whenever the POS connection through a FCM (Fast Connection Modem) interface is hanged up by POS terminal.
NTF hpnicfPosaFcmLinkNegoFailed	1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.4			This trap is generated whenever the link layer negotiation is failed between the POS terminal and router through a FCM (Fast Connection Modem) interface.
NTF hpnicfPosaFcmPhyNegoFailed	1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.5			This trap is generated whenever the physical layer negotiation is failed between the POS terminal and router through a FCM (Fast Connection Modem) interface.
NTF hpnicfPosaTcpConnectionExceed	1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.6			This trap is generated whenever the number of connections exceeds the threshold.
NTF hpnicfPosaFcmConnectionExceed	1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.7			This trap is generated whenever the number of connections exceeds the threshold.
NTF hpnicfPosaTcpTradeExceed	1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.8			This trap is generated whenever the number of trades in any TCP connect exceeds the limit.
hpnicfPosaTrapObjects	1.3.6.1.4.1.11.2.14.11.15.2.92.3.1
INT hpnicfPosaAppStateChangeObject	1.3.6.1.4.1.11.2.14.11.15.2.92.3.1.1	INTEGER	accessible-for-notify	This is a dummy MIB object referenced by the hpnicfPosaAppStateChange trap. This object shows the availability changing of corresponding application server.

RFC description

Manages HP POSA (Point of Sale Access) systems, including terminal connections, application hosting, and call mapping for telecom networks.

Start monitoring H3C/HPE Networking (ICF-based) device (POS terminal-to-acquiring-host relay) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-POSA-MIB