H3C-PU-MAN-MIB

All MIBs › H3C-PU-MAN-MIB

Organization: H3C Technologies Co., Ltd.

Last Updated: 2007-09-05

Category: Hardware and Environment, Vendor: H3C/HH3C

Description: H3C MIB for processing unit management monitoring CPU modules, their status, and resource utilization.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-PU-MAN-MIB?

H3C-PU-MAN-MIB is a vendor-specific MIB from H3C used to manage Processing Units (PU) in video surveillance systems, specifically encoder (EC), decoder (DC), and encoder-recorder (ECR) devices that capture and process remote video and audio streams. It exposes online/offline status of processing units, their addresses and version-server links, and hardware alarm inputs and outputs, alongside camera-online counts for encoder units. This MIB is explicitly geared toward monitoring hardware and connectivity status: whether a PU is online, whether external input/output alarm channels (e.g., door sensors, relays) are triggered, and how many cameras attached to an encoder are currently reachable. As an H3C private surveillance MIB, it does not depend on standard IETF video MIBs but is part of a broader H3C video-surveillance MIB family alongside modules like H3C-VM-MAN-MIB. It is typically deployed in H3C IP video surveillance systems where administrators need real-time health and alarm status of encoding/decoding appliances distributed across camera sites. Engineers can download the H3C-PU-MAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-PU-MAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C video surveillance encoders/decoders
H3C encoder-recorder (ECR) units

Monitoring Examples

An administrator would poll h3cPUisOnline to detect when an encoder or decoder unit drops offline, then check h3cPUExternalInputAlarmTable/h3cPUExternalInputAlarmEntry (indexed by h3cPUExternalInputAlarmChannelID) to see if h3cPUExternalInputAlarmStatus shows an active alarm such as a tamper or door-open condition. Correspondingly, h3cPUExternalOutputAlarmTable lets an operator confirm that alarm relay outputs fired as configured in response. Tracking h3cPUECCameraOnlines reveals when cameras attached to an encoder unit go offline, which combined with h3cPUisOnline pinpoints whether the fault is at the camera or the processing unit itself. A sudden drop in camera online count alongside a PU offline event would indicate a power or network failure at that surveillance site.

What Can Be Monitored

processing unit online status
external input alarm status
external output alarm status
camera online count
version server address

Imported Objects

From HUAWEI-3COM-OID-MIB

h3cSurveillanceMIB

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TruthValue

How to Use in IPNetwork Monitor

Example using h3cPUDCRcvVideoPackets OID:

Select an H3C video surveillance encoders/decoder as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cPUDCRcvVideoPackets into the Find box to locate it in the OID tree, then select it and click OK. The total number of video packets which are received from interfaces. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cPUMan	1.3.6.1.4.1.2011.10.9.2			The PU includes those device like EC(Encoder), DC(Decoder) and ECR(Encoder Recorder). The PU will survey the remote video and audio. This MIB is defined to manage the PU as our private MIB node according to its specific capability.
h3cPUCommonMan	1.3.6.1.4.1.2011.10.9.2.1
h3cPUCommonManObjects	1.3.6.1.4.1.2011.10.9.2.1.1
T/F h3cPUisOnline	1.3.6.1.4.1.2011.10.9.2.1.1.1	TruthValue	read-only	The PU online status indicates whether the PU is normally registered into the VM. True indicates that the PU is normally registered into the VM.
IP h3cPUCMSAddr	1.3.6.1.4.1.2011.10.9.2.1.1.2	IpAddress	read-only	The IP address of the CMS. All zero address indicates the CMS address is not configured.
IP h3cPUVersionServerAddr	1.3.6.1.4.1.2011.10.9.2.1.1.3	IpAddress	read-only	The IP address of the version server. All zero address indicates the version server is not configured or does not support remote upgrade.
h3cPUCommonManTables	1.3.6.1.4.1.2011.10.9.2.1.2
h3cPUExternalInputAlarmTable	1.3.6.1.4.1.2011.10.9.2.1.2.1		not-accessible	External input alarm table
h3cPUExternalInputAlarmEntry	1.3.6.1.4.1.2011.10.9.2.1.2.1.1		not-accessible	External input alarm entry
U32 h3cPUExternalInputAlarmChannelID	1.3.6.1.4.1.2011.10.9.2.1.2.1.1.1	Unsigned32	accessible-for-notify	The ID of the external input alarm channel.
T/F h3cPUExternalInputAlarmStatus	1.3.6.1.4.1.2011.10.9.2.1.2.1.1.2	TruthValue	read-only	True indicates that the current channel has alarm.
h3cPUExternalOutputAlarmTable	1.3.6.1.4.1.2011.10.9.2.1.2.2		not-accessible	External output alarm table
h3cPUExternalOutputAlarmEntry	1.3.6.1.4.1.2011.10.9.2.1.2.2.1		not-accessible	External output alarm entry
U32 h3cPUExternalOutputAlarmChannelID	1.3.6.1.4.1.2011.10.9.2.1.2.2.1.1	Unsigned32	accessible-for-notify	The ID of the external output alarm channel
T/F h3cPUExternalOutputAlarmStatus	1.3.6.1.4.1.2011.10.9.2.1.2.2.1.2	TruthValue	read-only	True indicates that the current channel has alarm.
h3cPUECMan	1.3.6.1.4.1.2011.10.9.2.2
h3cPUECManObjects	1.3.6.1.4.1.2011.10.9.2.2.1
U32 h3cPUECCameraOnlines	1.3.6.1.4.1.2011.10.9.2.2.1.1	Unsigned32	read-only	Number of online cameras connected to an EC.
U32 h3cPUECCameraAvailRate	1.3.6.1.4.1.2011.10.9.2.2.1.2	Unsigned32	read-only	Camera available rate. That is, the ratio of available cameras to total cameras connected to an EC. It ranges from 0 to 100.
h3cPUECManTables	1.3.6.1.4.1.2011.10.9.2.2.2
h3cPUECVideoChannelTable	1.3.6.1.4.1.2011.10.9.2.2.2.1		not-accessible	Video channel table
h3cPUECVideoChannelEntry	1.3.6.1.4.1.2011.10.9.2.2.2.1.1		not-accessible	Video channel entry
U32 h3cPUECVideoChannelID	1.3.6.1.4.1.2011.10.9.2.2.2.1.1.1	Unsigned32	accessible-for-notify	The ID of the video channel
STR h3cPUECVideoChannelName	1.3.6.1.4.1.2011.10.9.2.2.2.1.1.2	DisplayString	read-only	The name of the video channel. It is suggested that the name includes the channel ID information.
BIT h3cPUECVideoChannelServiceStatus	1.3.6.1.4.1.2011.10.9.2.2.2.1.1.3	Bits	read-only	The service status of the video channel. 0 the status is not known. 1 the video is not used or the channel has no signal. 2 the camera is kinescoping. 3 the camera is take snapshot.
h3cPUECManMIBTrap	1.3.6.1.4.1.2011.10.9.2.2.3
h3cPUECManTrapPrex	1.3.6.1.4.1.2011.10.9.2.2.3.0
NTF h3cPUECManExternalSemaphoreTrap	1.3.6.1.4.1.2011.10.9.2.2.3.0.1			Send a trap about external semaphore alarm.
NTF h3cPUECManVideoLossTrap	1.3.6.1.4.1.2011.10.9.2.2.3.0.2			Send a trap about video loss. Video loss is that no video signal is inputted to the EC.
NTF h3cPUECManVideoRecoverTrap	1.3.6.1.4.1.2011.10.9.2.2.3.0.3			Send a trap about video recovery after loss.
NTF h3cPUECManMotionDetectTrap	1.3.6.1.4.1.2011.10.9.2.2.3.0.4			Send a trap about motion detection.
NTF h3cPUECManOnLineFailureTrap	1.3.6.1.4.1.2011.10.9.2.2.3.0.5			Send a trap when EC can not register the CMS.
NTF h3cPUECManConnectionCMSFailureTrap	1.3.6.1.4.1.2011.10.9.2.2.3.0.6			Send a trap when the connection with the CMS breaks down.
NTF h3cPUECManConnectionVerSrvFailureTrap	1.3.6.1.4.1.2011.10.9.2.2.3.0.7			Send a trap when the connection with the version server breaks down or can not create.
NTF h3cPUECManFlashFailureTrap	1.3.6.1.4.1.2011.10.9.2.2.3.0.8			Send a trap about flash failure.
NTF h3cPUECManCameraShelterTrap	1.3.6.1.4.1.2011.10.9.2.2.3.0.9			Send a trap when a camera is sheltered.
h3cPUECManTrapObjects	1.3.6.1.4.1.2011.10.9.2.2.3.1
U32 h3cPUECRegionCoordinateX1	1.3.6.1.4.1.2011.10.9.2.2.3.1.1	Unsigned32	accessible-for-notify	The horizontal coordinate of top left point of the motion detection region.
U32 h3cPUECRegionCoordinateY1	1.3.6.1.4.1.2011.10.9.2.2.3.1.2	Unsigned32	accessible-for-notify	The vertical coordinate of top left point of the motion detection region.
U32 h3cPUECRegionCoordinateX2	1.3.6.1.4.1.2011.10.9.2.2.3.1.3	Unsigned32	accessible-for-notify	The horizontal coordinate of botton right point of the motion detection region.
U32 h3cPUECRegionCoordinateY2	1.3.6.1.4.1.2011.10.9.2.2.3.1.4	Unsigned32	accessible-for-notify	The horizontal coordinate of botton right point of the motion detection region.
h3cPUDCMan	1.3.6.1.4.1.2011.10.9.2.3
h3cPUDCManObjects	1.3.6.1.4.1.2011.10.9.2.3.1
C32 h3cPUDCRcvVideoPacketsEx	1.3.6.1.4.1.2011.10.9.2.3.1.1	Counter32	read-only	The total number of video packets which are received from interfaces.
C32 h3cPUDCRcvVideoRefFrames	1.3.6.1.4.1.2011.10.9.2.3.1.2	Counter32	read-only	The total number of video reference frames which are received from interfaces.
C32 h3cPUDCVideoPacketsLoss	1.3.6.1.4.1.2011.10.9.2.3.1.3	Counter32	read-only	The total number of lost video packets.
C32 h3cPUDCVideoRefFramesLoss	1.3.6.1.4.1.2011.10.9.2.3.1.4	Counter32	read-only	The total number of lost video reference frames.

RFC description

H3C Processing Unit (encoder, decoder, recorder) management MIB for surveillance video and audio monitoring.

Start monitoring H3C video surveillance encoders/decoders with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-PU-MAN-MIB