HH3C-VMAP-MIB

All MIBs › HH3C-VMAP-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2013-03-08

Category: Technology: Switching/L2, Technology: VLAN, VLAN and Bridging, Vendor: H3C/HH3C

Description: HH3C MIB for VLAN mapping (VMAP) configuration translating VLAN IDs between customer and provider networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-VMAP-MIB?

HH3C-VMAP-MIB is a private H3C enterprise MIB implementing the IEEE 802.1 VLAN Mapping (VMAP) feature, which translates customer VLAN IDs to provider VLAN IDs at network-to-network interfaces (NNI), commonly used in metro-Ethernet or carrier-Ethernet service delivery. It exposes configuration tables for NNI ports, 1:1 VLAN mappings, and N:1 VLAN range mappings between original and translated VLAN IDs. Its monitoring role is entirely configuration/software-state focused — verifying that VLAN translation rules are correctly provisioned and active on the intended ports — since VMAP has no hardware sensor component. It builds on standard 802.1Q VLAN and bridge MIBs, as VLAN mapping only makes sense layered on top of an underlying VLAN-aware bridge. It is deployed on H3C carrier-class or metro switches providing VLAN translation for service-provider Ethernet access. Engineers can download the HH3C-VMAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-VMAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C carrier/metro Ethernet switches

Monitoring Examples

An operator can poll hh3cVMAP1to1Table (via hh3cVMAP1to1Entry) to confirm that hh3cVMAP1to1Vlan correctly maps to hh3cVMAP1to1TranslatedVlan on a given port, and check hh3cVMAP1to1RowStatus to ensure the mapping is active rather than left in a notInService state. hh3cVMAPNto1RangeTable, using hh3cVMAPNto1StartVlan and hh3cVMAPNto1EndVlan, can be checked to verify a bulk range mapping matches provisioning records. hh3cVMAPNNIState on hh3cVMAPNNITable confirms whether a given interface is correctly designated as an NNI port for the mapping to apply.

What Can Be Monitored

NNI port VMAP state
1:1 VLAN translation mappings
N:1 VLAN range mappings
VLAN mapping row/provisioning status

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cVmap	1.3.6.1.4.1.25506.2.138			H3C 802.1 VLAN Mapping MIB Version
hh3cVMAPNNITable	1.3.6.1.4.1.25506.2.138.1		not-accessible	VLAN mapping NNI table.
hh3cVMAPNNIEntry	1.3.6.1.4.1.25506.2.138.1.1		not-accessible	VLAN mapping NNI table entries.
T/F hh3cVMAPNNIState	1.3.6.1.4.1.25506.2.138.1.1.1	TruthValue	read-write	Set the network-side interface for a many-to-one VLAN mapping.
hh3cVMAP1to1Table	1.3.6.1.4.1.25506.2.138.2		not-accessible	One-to-one VLAN mapping table.
hh3cVMAP1to1Entry	1.3.6.1.4.1.25506.2.138.2.1		not-accessible	One-to-one VLAN mapping table entries.
I32 hh3cVMAP1to1Vlan	1.3.6.1.4.1.25506.2.138.2.1.1	Integer32	not-accessible	The original VLAN for a one-to-one VLAN mapping on the port.
I32 hh3cVMAP1to1TranslatedVlan	1.3.6.1.4.1.25506.2.138.2.1.2	Integer32	read-create	The translated VLAN for a one-to-one VLAN mapping on the port.
ROW hh3cVMAP1to1RowStatus	1.3.6.1.4.1.25506.2.138.2.1.3	RowStatus	read-create	Operation status of this table entry.
hh3cVMAPNto1RangeTable	1.3.6.1.4.1.25506.2.138.3		not-accessible	Many-to-one VLAN mapping table. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
hh3cVMAPNto1RangeEntry	1.3.6.1.4.1.25506.2.138.3.1		not-accessible	Many-to-one VLAN mapping table entries. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
I32 hh3cVMAPNto1StartVlan	1.3.6.1.4.1.25506.2.138.3.1.1	Integer32	not-accessible	The original start VLAN for a many-to-one VLAN mapping on the port.
I32 hh3cVMAPNto1EndVlan	1.3.6.1.4.1.25506.2.138.3.1.2	Integer32	read-create	The original end VLAN for a many-to-one VLAN mapping on the port.
I32 hh3cVMAPNto1RangeTranslatedVlan	1.3.6.1.4.1.25506.2.138.3.1.3	Integer32	read-create	The translated VLAN for a many-to-one VLAN mapping on the port.
ROW hh3cVMAPNto1RangeRowStatus	1.3.6.1.4.1.25506.2.138.3.1.4	RowStatus	read-create	Operation status of this table entry.
hh3cVMAPNto1SingleTable	1.3.6.1.4.1.25506.2.138.4		not-accessible	Many-to-one VLAN mapping table. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
hh3cVMAPNto1SingleEntry	1.3.6.1.4.1.25506.2.138.4.1		not-accessible	Many-to-one VLAN mapping table entries. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
I32 hh3cVMAPNto1Vlan	1.3.6.1.4.1.25506.2.138.4.1.1	Integer32	not-accessible	The original VLANs for a many-to-one VLAN mapping on the port.
I32 hh3cVMAPNto1SingleTranslatedVlan	1.3.6.1.4.1.25506.2.138.4.1.2	Integer32	read-create	The translated VLAN for a many-to-one VLAN mapping on the port.
ROW hh3cVMAPNto1SingleRowStatus	1.3.6.1.4.1.25506.2.138.4.1.3	RowStatus	read-create	Operation status of this table entry.
hh3cVMAP1to2RangeTable	1.3.6.1.4.1.25506.2.138.5		not-accessible	One-to-two VLAN mapping table. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
hh3cVMAP1to2RangeEntry	1.3.6.1.4.1.25506.2.138.5.1		not-accessible	One-to-two VLAN mapping table entries. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
I32 hh3cVMAP1to2StartVlan	1.3.6.1.4.1.25506.2.138.5.1.1	Integer32	not-accessible	The original start VLAN for a one-to-two VLAN mapping on the port.
I32 hh3cVMAP1to2EndVlan	1.3.6.1.4.1.25506.2.138.5.1.2	Integer32	read-create	The original end VLAN for a one-to-two VLAN mapping on the port.
I32 hh3cVMAP1to2RangeNestedVlan	1.3.6.1.4.1.25506.2.138.5.1.3	Integer32	read-create	The outer VLAN for a one-to-two VLAN mapping on the port.
ROW hh3cVMAP1to2RangeRowStatus	1.3.6.1.4.1.25506.2.138.5.1.4	RowStatus	read-create	Operation status of this table entry.
hh3cVMAP1to2SingleTable	1.3.6.1.4.1.25506.2.138.6		not-accessible	One-to-two VLAN mapping table. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
hh3cVMAP1to2SingleEntry	1.3.6.1.4.1.25506.2.138.6.1		not-accessible	One-to-two VLAN mapping table entries. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
I32 hh3cVMAP1to2Vlan	1.3.6.1.4.1.25506.2.138.6.1.1	Integer32	not-accessible	The original VLANs for a one-to-two VLAN mapping on the port.
I32 hh3cVMAP1to2SingleNestedVlan	1.3.6.1.4.1.25506.2.138.6.1.2	Integer32	read-create	The outer VLAN for a one-to-two VLAN mapping on the port.
ROW hh3cVMAP1to2SingleRowStatus	1.3.6.1.4.1.25506.2.138.6.1.3	RowStatus	read-create	Operation status of this table entry.
hh3cVMAP2to2Table	1.3.6.1.4.1.25506.2.138.7		not-accessible	Two-to-two VLAN mapping table.
hh3cVMAP2to2Entry	1.3.6.1.4.1.25506.2.138.7.1		not-accessible	Two-to-two VLAN mapping table entries.
I32 hh3cVMAP2to2OuterVlan	1.3.6.1.4.1.25506.2.138.7.1.1	Integer32	not-accessible	The original outer VLAN for a two-to-two VLAN mapping on the port.
I32 hh3cVMAP2to2InnerVlan	1.3.6.1.4.1.25506.2.138.7.1.2	Integer32	not-accessible	The original inner VLAN for a two-to-two VLAN mapping on the port.
I32 hh3cVMAP2to2TranslatedOuterVlan	1.3.6.1.4.1.25506.2.138.7.1.3	Integer32	read-create	The translated outer VLAN for a two-to-two VLAN mapping on the port.
I32 hh3cVMAP2to2TranslatedInnerVlan	1.3.6.1.4.1.25506.2.138.7.1.4	Integer32	read-create	The translated inner VLAN for a two-to-two VLAN mapping on the port.
ROW hh3cVMAP2to2RowStatus	1.3.6.1.4.1.25506.2.138.7.1.5	RowStatus	read-create	Operation status of this table entry.

RFC description

Manages 802.1 VLAN mapping configuration on H3C network switches.

Start monitoring H3C carrier/metro Ethernet switch (802.1 VLAN Mapping) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-VMAP-MIB

What Is HH3C-VMAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description