HH3C-HPEOC-MIB

All MIBs › HH3C-HPEOC-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2007-08-28

Category: Technology: EPON/PON, Vendor: H3C/HH3C

Description: Manages Home-Phone-Line Ethernet over Coax (HPEOC) access parameters on H3C broadband access nodes.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-HPEOC-MIB?

HH3C-HPEOC-MIB is an H3C enterprise MIB module for managing HomePlug AV-based Ethernet-over-Coax (EOC) broadband access equipment, covering client and CNU (Coax Network Unit) endpoints used in cable/coax last-mile deployments. It exposes configuration data such as VLAN management settings, Ethernet port types, broadcast control, and anonymous-station status, alongside system-level identification fields for connected client units. The MIB is particularly useful for monitoring the operational health and software status of remote EOC endpoints, including client descriptor/system information and firmware version reporting, which lets operators confirm a unit is alive and running expected firmware. It is a vendor-specific extension and does not appear to lean heavily on standard IETF MIBs, instead defining its own EOC-specific object tree. Typical deployment is on H3C broadband access nodes and head-end equipment serving residential or small-business coax/Ethernet bridging, where HH3C-HPEOC-MIB SNMP monitoring supports ongoing visibility into client and CNU endpoint health.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-HPEOC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C EOC/HomePlug broadband access node
H3C coax network unit (CNU)

Monitoring Examples

An operator can poll hh3cHPEOCCltSysManTable/hh3cHPEOCCltSysManEntry to retrieve hh3cHPEOCCltDescr and hh3cHPEOCCltFwVersion for each connected client unit, confirming which firmware build is deployed across the access network. The hh3cHPEOCCnuSysManTable exposes hh3cHPEOCCnuBcastControl and hh3cHPEOCCnuAnonymStatus at the CNU (head-end) side, letting an admin verify broadcast suppression settings and detect unauthorized anonymous client attach attempts. hh3cHPEOCCltVlanManTable tracks per-client VLAN type assignments via hh3cHPEOCCltVlanType, so a mismatch here would reveal a misconfigured VLAN tag causing a subscriber to lose connectivity.

What Can Be Monitored

client firmware version
client system description
VLAN type per client
CNU broadcast control status
anonymous client status
Ethernet port type

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using hh3cHPEOCFECErrors OID:

Select an H3C broadband access device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cHPEOCFECErrors into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cHPEOC	1.3.6.1.4.1.25506.2.84			The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification.
hh3cHPEOCAutoUpObjects	1.3.6.1.4.1.25506.2.84.1.11
U32 hh3cHPEOCAvgBitsPerCarrier	1.3.6.1.4.1.25506.2.84.2.1.1.2	Unsigned32	read-only	The cable port's average bits per carrier.
U32 hh3cHPEOCAvgInPBCRCErrors	1.3.6.1.4.1.25506.2.84.2.1.1.4	Unsigned32	read-only	The input PB CRC errors on average.
U32 hh3cHPEOCAvgOutPBCRCErrors	1.3.6.1.4.1.25506.2.84.2.1.1.7	Unsigned32	read-only	The cable port's physical block(PB) cyclic redundancy check(CRC) errors sent on average.
I32 hh3cHPEOCAvgOutPower	1.3.6.1.4.1.25506.2.84.2.1.1.6	Integer32	read-only	The cable port's power sent on average, the unit is db.
I32 hh3cHPEOCAvgSNRPerCarrier	1.3.6.1.4.1.25506.2.84.2.1.1.3	Integer32	read-only	The cable port's signal noise ratio(SNR) bits per carrier.
OCT hh3cHPEOCBitPerSymbol	1.3.6.1.4.1.25506.2.84.2.2.1.2	OCTET STRING	read-only	hh3cHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable bit map.
hh3cHPEOCBitPerSymbolEntry	1.3.6.1.4.1.25506.2.84.2.2.1		not-accessible	The entry of the table hh3cHPEOCBitPerSymbolTable.
U32 hh3cHPEOCBitPerSymbolIndex	1.3.6.1.4.1.25506.2.84.2.2.1.1	Unsigned32	not-accessible	The index of the hh3cHPEOCBitPerSymbolTable.
hh3cHPEOCBitPerSymbolTable	1.3.6.1.4.1.25506.2.84.2.2		not-accessible	This table defines the bits per symbol parameters of the cable line.
hh3cHPEOCCableInfo	1.3.6.1.4.1.25506.2.84.2
hh3cHPEOCCableInfoEntry	1.3.6.1.4.1.25506.2.84.2.1.1		not-accessible	The entry of the table hh3cHPEOCCableInfoTable.
hh3cHPEOCCableInfoTable	1.3.6.1.4.1.25506.2.84.2.1		not-accessible	This table defines the primary parameters of the cable information.
T/F hh3cHPEOCCltAutoUpgrade	1.3.6.1.4.1.25506.2.84.1.5	TruthValue	read-write	Auto upgrade Status. true(1) - The firmware of the CNU will be auto changed by CLT. false(2)- The firmware of the CNU will not be auto changed.
INT hh3cHPEOCCltAutoUpgradeType	1.3.6.1.4.1.25506.2.84.1.10	INTEGER	read-write	Type of auto upgrade status. It depends on hh3cHPEOCCltAutoUpgrade status. flash - The CLT auto upgrade the firmware inside its flash to the CNUs. ftp - First download the firmware from FTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs. tftp - First download the firmware from TFTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs.
STR hh3cHPEOCCltDescr	1.3.6.1.4.1.25506.2.84.1.3.1.1	DisplayString	read-write	Set the description of CLT.
INT hh3cHPEOCCltEthPortType	1.3.6.1.4.1.25506.2.84.1.2.1.1	INTEGER	read-write	Control CLT ethernet ports' type, normal : port which used for normal translation, debug : port which used for debug.
STR hh3cHPEOCCltFwVersion	1.3.6.1.4.1.25506.2.84.1.3.1.2	DisplayString	read-only	EOC firmware version. If the object length is zero, it means the version is unknown.
hh3cHPEOCCltSysManEntry	1.3.6.1.4.1.25506.2.84.1.3.1		not-accessible	The entry of the table hh3cHPEOCCltSysManTable.
hh3cHPEOCCltSysManTable	1.3.6.1.4.1.25506.2.84.1.3		not-accessible	This table implements the management of CLT(Coax Line Terminal).
hh3cHPEOCCltVlanManEntry	1.3.6.1.4.1.25506.2.84.1.2.1		not-accessible	The entry of the table hh3cHPEOCCltVlanManTable.
hh3cHPEOCCltVlanManTable	1.3.6.1.4.1.25506.2.84.1.2		not-accessible	This table implements the management of CLT(Coax Line Terminal) VLAN.
INT hh3cHPEOCCltVlanType	1.3.6.1.4.1.25506.2.84.1.1	INTEGER	read-write	Control EOC CLT's VLAN type, ieee8021q : 802.1q VLAN mode, portbased : portbased VLAN mode.
T/F hh3cHPEOCCnuAnonymStatus	1.3.6.1.4.1.25506.2.84.1.4.1.2	TruthValue	read-only	Anonymity status. true(1) - the user which uses the CNU is anonymous. false(2) - the user which uses the CNU has an account.
T/F hh3cHPEOCCnuBcastControl	1.3.6.1.4.1.25506.2.84.1.4.1.1	TruthValue	read-write	Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable.
U32 hh3cHPEOCCnuMacLimit	1.3.6.1.4.1.25506.2.84.1.4.1.3	Unsigned32	read-write	Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address entry can access the CNU.
hh3cHPEOCCnuSysManEntry	1.3.6.1.4.1.25506.2.84.1.4.1		not-accessible	The entry of the table hh3cHPEOCCnuSysManTable.
hh3cHPEOCCnuSysManTable	1.3.6.1.4.1.25506.2.84.1.4		not-accessible	This table implements the management of CNUs.
MAC hh3cHPEOCCpuMacAddress	1.3.6.1.4.1.25506.2.84.1.7	MacAddress	read-only	EOC CPU's MAC address.
STR hh3cHPEOCDownLoadCNUFWResult	1.3.6.1.4.1.25506.2.84.1.9	DisplayString	accessible-for-notify	Download CNU firmware result.
C64 hh3cHPEOCFECErrorsEx	1.3.6.1.4.1.25506.2.84.2.1.1.1	Counter64	read-only	The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. It's a technology of controlling errors. Packets in transmission is checked by the receiver, if error occurs, the receiver will announce the sender to resend.
C64 hh3cHPEOCInTotalPkts	1.3.6.1.4.1.25506.2.84.2.1.1.5	Counter64	read-only	The total number of packets(including bad packets) received on this interface.
I32 hh3cHPEOCOffLineCnuNumber	1.3.6.1.4.1.25506.2.84.1.8	Integer32	read-only	The total number of the offline CNU(s).
I32 hh3cHPEOCOnLineCnuNumber	1.3.6.1.4.1.25506.2.84.1.6	Integer32	read-only	The total number of the online CNU(s).
C64 hh3cHPEOCOutTotalPkts	1.3.6.1.4.1.25506.2.84.2.1.1.8	Counter64	read-only	The total count of the packets(including bad packets) sent on this interface.
IP hh3cHPEOCServerAddress	1.3.6.1.4.1.25506.2.84.1.11.1	IpAddress	read-write	The address of remote host acting as server for operation. The default value is 0.0.0.0
STR hh3cHPEOCServerPassword	1.3.6.1.4.1.25506.2.84.1.11.3	DisplayString	read-write	Remote user password for copying via ftp protocol. Optionally, this object may be ignored for protocols other than ftp. It contains 1 to 31 characters.
STR hh3cHPEOCServerUser	1.3.6.1.4.1.25506.2.84.1.11.2	DisplayString	read-write	When using ftp to transfer files, the user name must be specified through this node. It contains 1 to 30 characters.
hh3cHPEOCSystem	1.3.6.1.4.1.25506.2.84.1

RFC description

Manages Ethernet Over Cable (EOC) networks using HomePlug AV specification with VLAN support.

Start monitoring H3C broadband access devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-HPEOC-MIB