HPN-ICF-PBR-MIB :: hpnicfPBRMibApplyPrecedenceValue

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › HPN-ICF-PBR-MIB › hpnicfPBRMibApplyPrecedenceValue

hpnicfPBRMibApplyPrecedenceValue

Module: HPN-ICF-PBR-MIB

OID (symbolic): HPN-ICF-PBR-MIB::hpnicfPBRMibApplyPrecedenceValue

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Value of precedence being applied on IP header. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7) Setting -1 indicates closing this action.

What is hpnicfPBRMibApplyPrecedenceValue?

The IP precedence value (0-7, e.g. routine, priority, flash, critical, network) that this PBR policy node stamps onto the IP header of matching packets; setting it to -1 disables this apply action for the node. An admin uses this to mark matched traffic for downstream QoS treatment based on precedence rather than DSCP.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1.1
snmpwalk -v2c -c public <target> HPN-ICF-PBR-MIB::hpnicfPBRMibApplyPrecedenceValue

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1.1.1
snmpget -v2c -c public <target> HPN-ICF-PBR-MIB::hpnicfPBRMibApplyPrecedenceValue.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1.1.1 i <value>

Start monitoring HP/H3C Comware router/Layer 3 switch (Policy-Based Routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-PBR-MIB::hpnicfPBRMibApplyPrecedenceValue OID value, configure state conditions and alerts, and monitor any HP/H3C Comware router/Layer 3 switch (Policy-Based Routing) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.113hpnicfPBRHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.113.2hpnicfPBRTablesHPN-ICF-PBR-MIB
1.3.6.1.4.1.11.2.14.11.15.2.113.2.4hpnicfPBRMibApplyPrecedenceTableHPN-ICF-PBR-MIB
1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1hpnicfPBRMibApplyPrecedenceEntryHPN-ICF-PBR-MIB
1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1.1hpnicfPBRMibApplyPrecedenceValueHPN-ICF-PBR-MIB