HPN-ICF-MPLS-BGP-VPN-MIB

All MIBs › HPN-ICF-MPLS-BGP-VPN-MIB

Last Updated: 2001-07-20

Category: MPLS and Traffic Engineering, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages MPLS BGP-based L3VPN routing instances, VRFs, and PE-CE routing policies on HP/Comware devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-MPLS-BGP-VPN-MIB?

HPN-ICF-MPLS-BGP-VPN-MIB is an HP/H3C Comware proprietary MIB implementing the IETF's MPLS/BGP VPN architecture (RFC 4364-family) on HP/H3C routers. It exposes counts of configured and active VRFs (Virtual Routing and Forwarding instances) alongside a per-interface configuration table recording the label-edge type (PE-facing vs. CE-facing), VPN classification, and the interface's IP address/mask within that VRF. As a configuration/protocol-status MIB it lets an administrator confirm how many VRFs are active versus configured and audit a specific interface's VPN/label-edge role. It is deployed on HP/H3C Comware routers providing MPLS/BGP VPN (L3VPN) services. Engineers can download the HPN-ICF-MPLS-BGP-VPN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-MPLS-BGP-VPN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware routers (MPLS/BGP L3VPN)

Monitoring Examples

An administrator checks hpnicfmplsVpnActiveVrfs against hpnicfmplsVpnConfiguredVrfs to confirm all provisioned VRFs are actually active before troubleshooting a customer VPN reporting missing routes.

What Can Be Monitored

active vs. configured VRF count
per-interface VPN/label-edge role

Imported Objects

From HPN-ICF-OID-MIB

hpnicfMpls

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
experimental

From SNMPv2-TC

DisplayString
RowStatus
StorageType
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfMplsVpn	1.3.6.1.4.1.11.2.14.11.15.8.12.3			This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft , August 1999.
hpnicfmplsVpnObjects	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1
hpnicfmplsVpnScalars	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.1
U32 hpnicfmplsVpnConfiguredVrfs	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.1.1	Unsigned32	read-only	The number of VRFs which are configured on this node.
U32 hpnicfmplsVpnActiveVrfs	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.1.2	Unsigned32	read-only	The number of VRFs which are active on this node. That is, those whose operStatus = Up (1).
hpnicfmplsVpnConf	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2
hpnicfmplsVpnInterfaceConfTable	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1		not-accessible	This table specifies per-interface MPLS capability and associated information.
hpnicfmplsVpnInterfaceConfEntry	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1		not-accessible	An entry in this table is created by an LSR for every interface capable of supporting MPLS/BGP VPN. Each entry in this table is meant to correspond to an entry in the Interfaces Table.
NUM hpnicfmplsVpnInterfaceConfIndex	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.1	InterfaceIndex	read-only	This is a unique index for an entry in the hpnicfmplsVpnInterfaceConfTable.
INT hpnicfmplsVpnInterfaceLabelEdgeType	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.2	INTEGER	read-only	Either the providerEdge(1) (PE) or customerEdge(2) (CE) bit MUST be set.
INT hpnicfmplsVpnInterfaceVpnClassification	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.3	INTEGER	read-only	Denotes whether this link participates in a carrier-of-carrier's, enterprise, or inter-provider scenario.
IP hpnicfmplsVpnInterfaceIpAddress	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.4	InetAddress	read-create	The IP address of this interface.
IP hpnicfmplsVpnInterfaceIpAddressMask	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.5	InetAddress	read-create	The IP address mask of this interface.
ROW hpnicfmplsVpnInterfaceConfRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.6	RowStatus	read-create	The row status for this entry. This value is used to create a row in this table, signifying that the specified interface is to be associated with the specified interface. If this operation suceeds, the interface will have been associated, otherwise the agent would not allow the association. If the agent only allows read-only operations on this table, it will create entries in this table as they are created.
hpnicfmplsVpnVrfConfTable	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2		not-accessible	This table specifies per-interface MPLS/BGP VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated with MPLS/VPN interfaces. Note that multiple interfaces can belong to the same VRF instance. The collection of all VRF instances comprises an actual VPN.
hpnicfmplsVpnVrfConfEntry	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1		not-accessible	An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.
HPN hpnicfmplsVpnVrfName	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.1	HpnicfMplsVpnId	read-only	The human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID.
HPN hpnicfmplsVpnVrfRouteDistinguisher	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.2	HpnicfMplsVpnRouteDistinguisher	read-create	The route distinguisher for this VRF.
INT hpnicfmplsVpnVrfNetPrefixType	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.3	INTEGER	read-only	Denotes the type network prefix in use for the PE-CE connections.
IP hpnicfmplsVpnVrfNetPrefix	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.4	InetAddress	read-only	Denotes the network prefix for the PE-CE connections.
T/F hpnicfmplsVpnVrfIpRouteRedistributeConn	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.5	TruthValue	read-create	Denotes the redistribution of directly connected networks into the VRF BGP table.
T/F hpnicfmplsVpnVrfIpRouteRedistributeStatic	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.6	TruthValue	read-create	Denotes the redistribution of static routes into the VRF BGP table.
T/F hpnicfmplsVpnVrfIpRouteRedistributeRip	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.7	TruthValue	read-create	Denotes the redistribution of rip routes into the VRF BGP table.
U32 hpnicfmplsVpnVrfConfHighRouteThreshold	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.8	Unsigned32	read-create	Denotes high-level water marker for the number of routes which this VRF may hold.
T/F hpnicfmplsVpnVrfConfIsWarnOnly	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.9	TruthValue	read-create	Denotes the action when the amount of VPN's routes exceed the hpnicfmplsVpnVrfConfHighRouteThreshold.
U32 hpnicfmplsVpnVrfConfMaxRoutes	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.10	Unsigned32	read-create	Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to hpnicfmplsVrfMaxPossibleRoutes unless it is set to 0.
ROW hpnicfmplsVpnVrfConfRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.11	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
hpnicfmplsVpnVrfRouteTargetTable	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3		not-accessible	This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN.
hpnicfmplsVpnVrfRouteTargetEntry	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1		not-accessible	An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS/BGP VPN instance. The indexing provides an ordering per-VRF instance.
HPN hpnicfmplsVpnVrfRouteTarget	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1.1	HpnicfMplsVpnRouteDistinguisher	read-only	The route target distribution policy.
INT hpnicfmplsVpnVrfRouteTargetType	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1.2	INTEGER	read-only	The route target export distribution type.
ROW hpnicfmplsVpnVrfRouteTargetRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1.3	RowStatus	read-create	Row status for this entry.
hpnicfmplsVpnVrfBgpNbrAddrTable	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4		not-accessible	This table specifies per-interface MPLS/BGP neighbor addresses for both PEs and CEs.
hpnicfmplsVpnVrfBgpNbrAddrEntry	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1		not-accessible	An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.
IP hpnicfmplsVpnVrfBgpNbrAddr	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.1	InetAddress	read-only	Denotes the BGP neighbor address.
INT hpnicfmplsVpnVrfBgpNbrRole	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.2	INTEGER	read-create	Denotes the role played by this BGP neighbor with respect to this VRF.
IPt hpnicfmplsVpnVrfBgpNbrType	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.3	InetAddressType	read-create	Denotes the address family of the PE address.
U32 hpnicfmplsVpnVrfBgpNbrAsNumber	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.4	Unsigned32	read-create	The Automonous System that the BGP's neighbour in.
INT hpnicfmplsVpnVrfBgpNbrAdminStatus	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.5	INTEGER	read-create	The action set by SNMP client.
ROW hpnicfmplsVpnVrfBgpNbrRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.6	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
hpnicfmplsVpnRoute	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3
hpnicfmplsVpnVrfRouteTable	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1		not-accessible	This table specifies per-interface MPLS/BGP VPN VRF Table routing information. Entries in this table define VRF routing entries associated with the specified MPLS/VPN interfaces. Note that this table contains both BGP and IGP routes, as both may appear in the same VRF.
hpnicfmplsVpnVrfRouteEntry	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1		not-accessible	An entry in this table is created by an LSR for every route present configured (either dynamically or statically) within the context of a specific VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.
IP hpnicfmplsVpnVrfRouteDest	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.1	InetAddress	read-only	The destination IP address of this route. This object may not take a Multicast (Class D) address value.
IP hpnicfmplsVpnVrfRouteMask	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.2	InetAddress	read-create	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the hpnicfmplsVpnVrfRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the hpnicfmplsVpnVrfRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bit-wise logical-AND of x with the value of the corresponding instance of the hpnicfmplsVpnVrfRouteDest object is not equal to hpnicfmplsVpnVrfRouteDest.
IP hpnicfmplsVpnVrfRouteNextHop	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.3	InetAddress	read-only	On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. .
NUM hpnicfmplsVpnVrfRouteIfIndex	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.4	InterfaceIndex	read-create	The ifIndex value that identifies the local interface through which the next hop of this route should be reached.
INT hpnicfmplsVpnVrfRouteProto	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.5	INTEGER	read-create	The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.
ROW hpnicfmplsVpnVrfRouteRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.6	RowStatus	read-create	Row status for this table. It is used according to row installation and removal conventions.

RFC description

Hewlett-Packard MPLS/BGP VPN MIB for managing virtual private network routing and VRF configuration.

Start monitoring HP/H3C Comware router (MPLS/BGP L3VPN VRF config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-MPLS-BGP-VPN-MIB

What Is HPN-ICF-MPLS-BGP-VPN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description