All MIBs › HPN-ICF-MPLS-BGP-VPN-MIB › hpnicfmplsVpnVrfConfMaxRoutes
hpnicfmplsVpnVrfConfMaxRoutes
Module: HPN-ICF-MPLS-BGP-VPN-MIB
OID (symbolic): HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfConfMaxRoutes
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.10
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to hpnicfmplsVrfMaxPossibleRoutes unless it is set to 0.
What is hpnicfmplsVpnVrfConfMaxRoutes?
Sets the hard maximum number of routes this VRF may hold; an admin uses this to cap route-table growth for a customer VPN and prevent it from exhausting router memory.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8 | hpnicfRhw | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12 | hpnicfMpls | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.12.3 | hpnicfMplsVpn | HPN-ICF-MPLS-BGP-VPN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.3.1 | hpnicfmplsVpnObjects | HPN-ICF-MPLS-BGP-VPN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2 | hpnicfmplsVpnConf | HPN-ICF-MPLS-BGP-VPN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2 | hpnicfmplsVpnVrfConfTable | HPN-ICF-MPLS-BGP-VPN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1 | hpnicfmplsVpnVrfConfEntry | HPN-ICF-MPLS-BGP-VPN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.10 | hpnicfmplsVpnVrfConfMaxRoutes | HPN-ICF-MPLS-BGP-VPN-MIB |