HPN-ICF-IPRAN-DCN-MIB

All MIBs › HPN-ICF-IPRAN-DCN-MIB

Last Updated: 2013-07-24

Category: Domain: Telco/Transport, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages IP RAN data communication network (DCN) parameters for mobile backhaul on HP/Comware transport devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-IPRAN-DCN-MIB?

HPN-ICF-IPRAN-DCN-MIB is an HP Networking (Comware/H3C) vendor MIB for IP RAN (mobile backhaul) transport devices, providing mechanisms to monitor network elements (NEs) within an IP-based Data Communication Network (DCN) used for out-of-band management of the transport nodes. It exposes a table of known network elements identified by NE ID, IP address/type, and subnet mask, along with routing metric and device-type information used to reach each NE, plus a count of total configured NEs. For hardware/software status monitoring, this MIB is primarily about verifying DCN reachability configuration to remote transport nodes, since a missing or misconfigured NE entry (wrong IP, mask, or metric) indicates that a given base-station or aggregation-site device may be unreachable for management/monitoring purposes. It relies on standard IP addressing concepts but is a vendor-specific management-plane MIB rather than an extension of a named IETF MIB. It is deployed on HP/Comware IP RAN transport routers used in mobile backhaul networks connecting cell sites to core aggregation points. Engineers can download the HPN-ICF-IPRAN-DCN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-IPRAN-DCN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/Comware IP RAN transport router

Monitoring Examples

An administrator would poll hpnicfIpRanDcnNeInfoTable (via hpnicfIpRanDcnNeInfoNeId) and inspect hpnicfIpRanDcnNeInfoNeIp, hpnicfIpRanDcnNeInfoNeIpType, and hpnicfIpRanDcnNeInfoMetric to confirm each remote network element's management IP and reachability metric are correctly provisioned. The hpnicfIpRanDcnNeInfoDeviceType field identifies what kind of device each NE is, and hpnicfIpRanDcnNeNumber gives a quick count to detect if an expected NE has dropped out of the DCN topology, which would indicate a lost management path to that cell-site or aggregation node.

What Can Be Monitored

network element ID, IP address, and type
NE subnet mask
routing metric to each NE
NE device type
total number of configured network elements

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfIpRanDcn	1.3.6.1.4.1.11.2.14.11.15.2.152			This MIB provides mechanisms to monitor all network elements(NE) in Ipran Data Communication Network.
hpnicfIpRanDcnMIB	1.3.6.1.4.1.11.2.14.11.15.2.152.1
hpnicfIpRanDcnObjects	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1
hpnicfIpRanDcnInfoObject	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.1
HPN hpnicfIpRanDcnNeId	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.1.1	HpnicfIpRanNeId	read-only	This object indicates the ID of the local network element.
IPt hpnicfIpRanDcnNeIpType	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.1.2	InetAddressType	read-only	This is the ip address type of the local network element.
IP hpnicfIpRanDcnNeIp	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.1.3	InetAddress	read-only	This is the ip address of the local network element.
IP hpnicfIpRanDcnMask	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.1.4	InetAddress	read-only	This is the ip address mask of the local network element.
hpnicfIpRanDcnNeInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2		not-accessible	This table provides the information of all network elements online.
hpnicfIpRanDcnNeInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1		not-accessible	A single network element information entry.
HPN hpnicfIpRanDcnNeInfoNeId	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1.1	HpnicfIpRanNeId	read-only	This is the network element ID uniquely identifying one network element in the routing domain.
IPt hpnicfIpRanDcnNeInfoNeIpType	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1.2	InetAddressType	read-only	This is the ip address type of the network element.
IP hpnicfIpRanDcnNeInfoNeIp	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1.3	InetAddress	read-only	This is the ip address of the network element.
I32 hpnicfIpRanDcnNeInfoMetric	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1.4	Integer32	read-only	The metric from the local network element to the remote network element.
STR hpnicfIpRanDcnNeInfoDeviceType	1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1.5	DisplayString	read-only	This is the device type of the network element.
hpnicfIpRanDcnTrapObjects	1.3.6.1.4.1.11.2.14.11.15.2.152.1.2
I32 hpnicfIpRanDcnNeNumber	1.3.6.1.4.1.11.2.14.11.15.2.152.1.2.1	Integer32	read-only	The overall number of network elements online.
INT hpnicfIpRanDcnNeChangeMode	1.3.6.1.4.1.11.2.14.11.15.2.152.1.2.2	INTEGER	read-only	The change mode of the last trap.
STR hpnicfIpRanDcnCompanyName	1.3.6.1.4.1.11.2.14.11.15.2.152.1.2.3	DisplayString	read-only	The name of company.
STR hpnicfIpRanDcnDeviceType	1.3.6.1.4.1.11.2.14.11.15.2.152.1.2.4	DisplayString	read-only	The type of device.
MAC hpnicfIpRanDcnDeviceMac	1.3.6.1.4.1.11.2.14.11.15.2.152.1.2.5	MacAddress	read-only	The bridge MAC address of the network element.
hpnicfIpRanDcnTraps	1.3.6.1.4.1.11.2.14.11.15.2.152.1.3
hpnicfIpRanDcnTrapsPrefix	1.3.6.1.4.1.11.2.14.11.15.2.152.1.3.0
NTF hpnicfIpRanDcnNeOnline	1.3.6.1.4.1.11.2.14.11.15.2.152.1.3.0.1			The trap is generated when a new network element is online.
NTF hpnicfIpRanDcnNeOffline	1.3.6.1.4.1.11.2.14.11.15.2.152.1.3.0.2			The trap is generated when a network element is offline.

RFC description

IP-RAN data communication network monitoring MIB for all network elements in HP IP-RAN systems.

Start monitoring HP/Comware IP RAN transport router (mobile backhaul DCN) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-IPRAN-DCN-MIB

What Is HPN-ICF-IPRAN-DCN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description