HPN-ICF-EPON-MIB

All MIBs › HPN-ICF-EPON-MIB

Last Updated: 2007-05-22

Category: Technology: EPON/PON, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Provides core EPON OLT and ONU management objects for HP/Comware Ethernet passive optical network equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-EPON-MIB?

HPN-ICF-EPON-MIB is an HP (Hewlett-Packard)/H3C Comware vendor MIB, under the hpnicfEpon branch of HP's ICF enterprise tree, that manages Ethernet Passive Optical Network (EPON) OLT and ONU hardware built to IEEE 802.3ah clauses 60/64/65. It covers OLT-side configuration and status through hpnicfOltSysManTable, hpnicfOltInfoTable, and hpnicfOltDbaManTable (dynamic bandwidth allocation), OLT port alarm thresholds via hpnicfOltPortAlarmThresholdTable, and ONU-side registration, authorization and bandwidth control through hpnicfOnuSysManTable, hpnicfOnuInfoTable (including optical Rx/Tx power and MAC/firmware identification), hpnicfOnuSlaManTable, hpnicfOnuBandWidthTable, and hpnicfOnuFirmwareUpdateTable. A large set of notifications (hpnicfEponPortAlarmBerTrap/FerTrap, hpnicfEponOnuRegistrationErrTrap, hpnicfEponOamDisconnectionTrap, hpnicfEponOnuPowerOffTrap and their matching recovery traps) signal bit/frame error thresholds, OAM link loss, registration failures and ONU power events. It is deployed on HP/H3C (Comware-based) EPON access switches and media converters delivering fiber-to-the-x services, and network engineers can find the HPN-ICF-EPON-MIB download when instrumenting these OLT/ONU deployments.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-EPON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware-based EPON OLT and ONU access equipment

Monitoring Examples

An operator polls hpnicfOnuInfoTable for hpnicfOnuOpticalPowerReceivedByOlt and hpnicfOnuRemoteFecStatus for a given ONU, and watches for an hpnicfEponPortAlarmBerTrap; a rising bit-error-rate trap combined with declining received optical power points to a degrading fiber link or dirty connector on that ONU's PON segment.

What Can Be Monitored

OLT dynamic bandwidth allocation (DBA) parameters
ONU registration and authorization status
ONU optical Rx/Tx power levels
port bit-error-rate (BER) and frame-error-rate (FER) alarms
ONU firmware update status
OAM link connectivity to registered ONUs

Imported Objects

From HPN-ICF-LSW-DEV-ADM-MIB

hpnicfLswFrameIndex	OBJECT-TYPE
hpnicfLswSlotIndex	OBJECT-TYPE

From HPN-ICF-OID-MIB

hpnicfEpon

OBJECT-IDENTITY

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfOnuInCRCErrPkts OID:

Select an HP/H3C Comware-based EPON OLT and ONU access equipment as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfOnuInCRCErrPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of frames received with bad CRC checksum. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfEponMibObjects	1.3.6.1.4.1.11.2.14.11.15.2.42.1			The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
hpnicfEponSysMan	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1
T/F hpnicfEponAutoAuthorize	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.1	TruthValue	read-write	This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized.
I32 hpnicfEponMonitorCycle	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.2	Integer32	read-write	The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.
I32 hpnicfEponMsgTimeOut	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.3	Integer32	read-write	Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
I32 hpnicfEponMsgLoseNum	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.4	Integer32	read-write	The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
T/F hpnicfEponSysHasEPONBoard	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.5	TruthValue	read-only	true(1) - At least an EPON board exists. false(2) - No EPON board exists.
T/F hpnicfEponMonitorCycleEnable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.6	TruthValue	read-write	Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
T/F hpnicfEponOltSoftwareErrAlmEnable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.7	TruthValue	read-write	Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
T/F hpnicfEponPortLoopBackAlmEnable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.8	TruthValue	read-write	LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
I32 hpnicfEponMonitorCycleMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.9	Integer32	read-only	The lower limit of cycle which be confined to the hpnicfEponMonitorCycle.
I32 hpnicfEponMonitorCycleMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.10	Integer32	read-only	The upper limit of cycle which be confined to the hpnicfEponMonitorCycle.
I32 hpnicfEponMsgTimeOutMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.11	Integer32	read-only	The lower limit of timeout which be confined to the hpnicfEponMsgTimeOut.
I32 hpnicfEponMsgTimeOutMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.12	Integer32	read-only	The upper limit of timeout which be confined to the hpnicfEponMsgTimeOut.
I32 hpnicfEponMsgLoseNumMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.13	Integer32	read-only	The lower limit of time which be confined to the hpnicfEponMsgLoseNum.
I32 hpnicfEponMsgLoseNumMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.14	Integer32	read-only	The upper limit of time which be confined to the hpnicfEponMsgLoseNum.
hpnicfEponSysScalarGroup	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.15
hpnicfEponSysManTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16		not-accessible	This table defines system related parameters.
hpnicfEponSysManEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1		not-accessible	The entry of the table hpnicfEponSysManTable.
I32 hpnicfEponSlotIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.1	Integer32	not-accessible	Slot Index, the index of hpnicfEponSysManTable.
INT hpnicfEponModeSwitch	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.2	INTEGER	read-write	cmode - epon standard mode. hmode - private mode.
INT hpnicfEponAutomaticMode	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.3	INTEGER	read-write	Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode.
I32 hpnicfEponOamDiscoveryTimeout	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.4	Integer32	read-write	Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.
I32 hpnicfEponEncryptionNoReplyTimeOut	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.5	Integer32	read-write	Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.
I32 hpnicfEponEncryptionUpdateTime	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.6	Integer32	read-write	Encryption key update timer for all ONUs on slot, indicated by hpnicfEponSlotIndex, ranging from 1 to 255, measured in seconds.
INT hpnicfEponAutoBindStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.7	INTEGER	read-write	enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.
hpnicfEponAutoUpdateTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17		not-accessible	EPON auto update ONU application configuration.
hpnicfEponAutoUpdateEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1		not-accessible	The entry of the table hpnicfEponAutoUpdateTable.
STR hpnicfEponAutoUpdateFileName	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.1	DisplayString	read-write	The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.
INT hpnicfEponAutoUpdateSchedStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.2	INTEGER	read-write	The status of schedule update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.
OCT hpnicfEponAutoUpdateSchedTime	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.3	OCTET STRING	read-write	The schedule update timing configuration is related to the hpnicfEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if hpnicfEponAutoUpdateSchedStatus is enabled.
INT hpnicfEponAutoUpdateSchedType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.4	INTEGER	read-write	The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.
INT hpnicfEponAutoUpdateRealTimeStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.5	INTEGER	read-write	The status of real time update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.
hpnicfEponOuiIndexNextTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18		not-accessible	Next OUI index table.
hpnicfEponOuiIndexNextEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1		not-accessible	The entry of the table hpnicfEponOuiIndexNextTable.
I32 hpnicfEponOuiIndexNext	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1.1	Integer32	read-only	This object contains an appropriate value to be used for hpnicfEponOuiIndex when creating rows in the hpnicfEponOuiTable.
hpnicfEponOuiTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19		not-accessible	List of OUI and OAM supported by OLT.
hpnicfEponOuiEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1		not-accessible	The entry of the table hpnicfEponOuiTable.
I32 hpnicfEponOuiIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.1	Integer32	not-accessible	The index of this table.
OCT hpnicfEponOuiValue	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.2	OCTET STRING	read-create	OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.
OCT hpnicfEponOamVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.3	OCTET STRING	read-create	Version of OAM protocol defined by the organization denoted by OUI.
ROW hpnicfEponOuiRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.4	RowStatus	read-create	The status of this table entry. Only active, createAndGo and the destory are supported.
hpnicfEponMulticastControlTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20		not-accessible	Multicast control global configuration.
hpnicfEponMulticastControlEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1		not-accessible	The entry of the table hpnicfEponMulticastControlTable.
I32 hpnicfEponMulticastVlanId	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.1	Integer32	not-accessible	The index of this table.
OCT hpnicfEponMulticastAddressList	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.2	OCTET STRING	read-create	The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.
ROW hpnicfEponMulticastStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.3	RowStatus	read-create	The status of this table entry. Only active, createAndGo and the destory are supported.
hpnicfEponFileName	1.3.6.1.4.1.11.2.14.11.15.2.42.1.2
OCT hpnicfEponDbaUpdateFileName	1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.1	OCTET STRING	read-write	The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path.
OCT hpnicfEponOnuUpdateFileName	1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.2	OCTET STRING	read-write	The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
hpnicfEponOltMan	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3
hpnicfOltSysManTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1		not-accessible	This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result
hpnicfOltSysManEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1		not-accessible	The entry of the table hpnicfOltSysManTable.
I32 hpnicfOltLaserOnTime	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.1	Integer32	read-write	The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).
I32 hpnicfOltLaserOffTime	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.2	Integer32	read-write	The laser off time of the ONUs during the discovery process, measured in TQ.
T/F hpnicfOltMultiCopyBrdCast	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.3	TruthValue	read-write	true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature.
T/F hpnicfOltEnableDiscardPacket	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.4	TruthValue	read-write	Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.
INT hpnicfOltSelfTest	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.5	INTEGER	read-write	selftest(1): Test OLT to check whether it's OK.
INT hpnicfOltSelfTestResult	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.6	INTEGER	read-only	The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.
U32 hpnicfOltMaxRtt	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.7	Unsigned32	read-write	Set the max Round Trip Time of this OLT.
hpnicfOltInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2		not-accessible	Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (hpnicfOltFirmMajorVersion, hpnicfOltFirmMinorVersion, hpnicfOltHardMajorVersion, hpnicfOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (hpnicfOltAgcLockTime, hpnicfOltAgcCdrTime) (3)The operation(activation) status of an OLT. (hpnicfOltMacAddress, hpnicfOltWorkMode)
hpnicfOltInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1		not-accessible	The entry of the table hpnicfOltInfoTable.
OCT hpnicfOltFirmMajorVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.1	OCTET STRING	read-only	OLT firmware major version. If the object length is zero, it means the version is unknown.
OCT hpnicfOltFirmMinorVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.2	OCTET STRING	read-only	OLT firmware minor version. If the object length is zero, it means the version is unknown.
OCT hpnicfOltHardMajorVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.3	OCTET STRING	read-only	OLT hardware major version. If the object length is zero, it means the version is unknown.
OCT hpnicfOltHardMinorVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.4	OCTET STRING	read-only	OLT hardware minor version. If the object length is zero, it means the version is unknown.
I32 hpnicfOltAgcLockTime	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.5	Integer32	read-only	PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.
I32 hpnicfOltAgcCdrTime	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.6	Integer32	read-only	PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value
MAC hpnicfOltMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.7	MacAddress	read-only	OLT MAC address.
INT hpnicfOltWorkMode	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.8	INTEGER	read-only	The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.
I32 hpnicfOltOpticalPowerTx	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.9	Integer32	read-only	The optical power transmitted by this OLT. It measured in 0.01 dBm unit.
I32 hpnicfOltOpticalPowerRx	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.10	Integer32	read-only	The burst optical power received by this OLT. It measured in 0.01 dBm unit.
hpnicfOltDbaManTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3		not-accessible	This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.
hpnicfOltDbaManEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1		not-accessible	The entry of the table hpnicfOltDbaManTable.
INT hpnicfOltDbaEnabledType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.1	INTEGER	read-write	Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source.
I32 hpnicfOltDbaDiscoveryLength	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.2	Integer32	read-write	Discovery length in TQ units.
I32 hpnicfOltDbaDiscovryFrequency	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.3	Integer32	read-write	How often should the OLT send discovery frames to the ONUs, measured in grant cycles.
I32 hpnicfOltDbaCycleLength	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.4	Integer32	read-write	The grant cycle length in TQ units.
OCT hpnicfOltDbaVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.5	OCTET STRING	read-only	DBA version of the OLT.
INT hpnicfOltDbaUpdate	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.6	INTEGER	read-write	Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hpnicfEponDbaUpdateFileName.
INT hpnicfOltDbaUpdateResult	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.7	INTEGER	read-only	The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set.
hpnicfOltPortAlarmThresholdTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4		not-accessible	The table defines the alarm threshold of OLT.
hpnicfOltPortAlarmThresholdEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1		not-accessible	The entry of the table hpnicfOltPortAlarmThresholdTable.
T/F hpnicfOltPortAlarmBerEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.1	TruthValue	read-write	Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.
INT hpnicfOltPortAlarmBerDirect	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.2	INTEGER	read-write	Traffic direction to monitor for BER alarm.
I32 hpnicfOltPortAlarmBerThreshold	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.3	Integer32	read-write	BER threshold exceed which the alarm is raised.
T/F hpnicfOltPortAlarmFerEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.4	TruthValue	read-write	Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.
INT hpnicfOltPortAlarmFerDirect	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.5	INTEGER	read-write	Traffic direction to monitor for FER alarm.
I32 hpnicfOltPortAlarmFerThreshold	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.6	Integer32	read-write	Frame error rate exceed threshold then the alarm is raised.
T/F hpnicfOltPortAlarmLlidMismatchEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.7	TruthValue	read-write	Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.
I32 hpnicfOltPortAlarmLlidMismatchThreshold	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.8	Integer32	read-write	The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.
T/F hpnicfOltPortAlarmRemoteStableEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.9	TruthValue	read-write	Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hpnicfOltPortAlarmLocalStableEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.10	TruthValue	read-write	Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hpnicfOltPortAlarmRegistrationEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.11	TruthValue	read-write	Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hpnicfOltPortAlarmOamDisconnectionEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.12	TruthValue	read-write	Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hpnicfOltPortAlarmEncryptionKeyEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.13	TruthValue	read-write	Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hpnicfOltPortAlarmVendorSpecificEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.14	TruthValue	read-write	Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hpnicfOltPortAlarmRegExcessEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.15	TruthValue	read-write	Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.
T/F hpnicfOltPortAlarmDFEEnabled	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.16	TruthValue	read-write	Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.
I32 hpnicfOltLaserOnTimeMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.5	Integer32	read-only	The lower limit of time which is confined to hpnicfOltLaserOnTime.
I32 hpnicfOltLaserOnTimeMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.6	Integer32	read-only	The upper limit of time which is confined to hpnicfOltLaserOnTime.
I32 hpnicfOltLaserOffTimeMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.7	Integer32	read-only	The lower limit of time which is confined to hpnicfOltLaserOffTime.
I32 hpnicfOltLaserOffTimeMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.8	Integer32	read-only	The upper limit of time which is confined to hpnicfOltLaserOffTime.
I32 hpnicfOltDbaDiscoveryLengthMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.9	Integer32	read-only	The lower limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength.
I32 hpnicfOltDbaDiscoveryLengthMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.10	Integer32	read-only	The upper limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength.
I32 hpnicfOltDbaDiscovryFrequencyMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.11	Integer32	read-only	The lower limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency.
I32 hpnicfOltDbaDiscovryFrequencyMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.12	Integer32	read-only	The upper limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency.
I32 hpnicfOltDbaCycleLengthMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.13	Integer32	read-only	The lower limit of the frames which is confined to hpnicfOltDbaCycleLength.
I32 hpnicfOltDbaCycleLengthMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.14	Integer32	read-only	The upper limit of the frames which is confined to hpnicfOltDbaCycleLength.
I32 hpnicfOltPortAlarmLlidMisMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.15	Integer32	read-only	The lower limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold.
I32 hpnicfOltPortAlarmLlidMisMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.16	Integer32	read-only	The upper limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold.
I32 hpnicfOltPortAlarmBerMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.17	Integer32	read-only	The lower limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold.
I32 hpnicfOltPortAlarmBerMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.18	Integer32	read-only	The upper limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold.
I32 hpnicfOltPortAlarmFerMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.19	Integer32	read-only	The lower limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold.
I32 hpnicfOltPortAlarmFerMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.20	Integer32	read-only	The upper limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold.
hpnicfOnuSilentTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21		not-accessible	This table is used for getting silent ONU information of OLT.
hpnicfOnuSilentEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1		not-accessible	The entry of the table hpnicfOnuSilentTable.
MAC hpnicfOnuSilentMacAddr	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.1	MacAddress	not-accessible	The MAC address of silent ONUs in OLT.
I32 hpnicfOnuSilentTime	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.2	Integer32	read-only	The aging time of a silent ONU.
hpnicfOltUsingOnuTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22		not-accessible	The table containing configurations to manage ONU interface(s) based on OLT interface.
hpnicfOltUsingOnuEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1		not-accessible	The entry of the table hpnicfOltUsingOnuTable.
I32 hpnicfOltUsingOnuNum	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.1	Integer32	not-accessible	The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.
I32 hpnicfOltUsingOnuIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.2	Integer32	read-only	The ifIndex of the ONU interface.
ROW hpnicfOltUsingOnuRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.3	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
hpnicfEponOnuMan	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5
hpnicfOnuSysManTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1		not-accessible	This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator.
hpnicfOnuSysManEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1		not-accessible	The entry of the table hpnicfOnuSysManTable.
INT hpnicfOnuEncryptMan	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.1	INTEGER	read-write	Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic.
INT hpnicfOnuReAuthorize	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.2	INTEGER	read-write	Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server.
T/F hpnicfOnuMulticastFilterStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.3	TruthValue	read-write	true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.
I32 hpnicfOnuDbaReportQueueSetNumber	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.4	Integer32	read-write	The number of queue sets reported in MPCP report frames.
INT hpnicfOnuRemoteFecStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.5	INTEGER	read-write	Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction.
INT hpnicfOnuPortBerStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.6	INTEGER	read-write	enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.
INT hpnicfOnuReset	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.7	INTEGER	read-write	Reboot ONU.
INT hpnicfOnuMulticastControlMode	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.8	INTEGER	read-write	igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.
I32 hpnicfOnuAccessVlan	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.9	Integer32	read-write	The VLAN ID assigned to untagged frames received on ONU.
STR hpnicfOnuEncryptKey	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.10	DisplayString	read-write	The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.
T/F hpnicfOnuUniUpDownTrapStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.11	TruthValue	read-write	true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.
INT hpnicfOnuFecStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.12	INTEGER	read-write	Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction.
I32 hpnicfOnuMcastCtrlHostAgingTime	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.13	Integer32	read-write	The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.
T/F hpnicfOnuMulticastFastLeaveEnable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.14	TruthValue	read-write	true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.
T/F hpnicfOnuPortIsolateEnable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.15	TruthValue	read-write	true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.
hpnicfOnuLinkTestTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2		not-accessible	LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames.
hpnicfOnuLinkTestEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1		not-accessible	The entry of hpnicfOnuLinkTestEntry.
I32 hpnicfOnuLinkTestFrameNum	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.1	Integer32	read-write	Exact number of measurement frames.
I32 hpnicfOnuLinkTestFrameSize	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.2	Integer32	read-write	Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 .
T/F hpnicfOnuLinkTestDelay	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.3	TruthValue	read-write	true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement.
T/F hpnicfOnuLinkTestVlanTag	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.4	TruthValue	read-write	true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.
I32 hpnicfOnuLinkTestVlanPriority	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.5	Integer32	read-write	VLAN priority: 0-7.
I32 hpnicfOnuLinkTestVlanTagID	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.6	Integer32	read-write	VLAN ID: 1-4094.
I32 hpnicfOnuLinkTestResultSentFrameNum	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.7	Integer32	read-only	The total number of frames sent during the link test process.
I32 hpnicfOnuLinkTestResultRetFrameNum	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.8	Integer32	read-only	The total number of frames return back during the link test process.
I32 hpnicfOnuLinkTestResultRetErrFrameNum	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.9	Integer32	read-only	The total number of error frames return back during the link test process.
I32 hpnicfOnuLinkTestResultMinDelay	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.10	Integer32	read-only	The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.
I32 hpnicfOnuLinkTestResultMeanDelay	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.11	Integer32	read-only	The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.
I32 hpnicfOnuLinkTestResultMaxDelay	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.12	Integer32	read-only	The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.
hpnicfOnuBandWidthTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3		not-accessible	Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection.
hpnicfOnuBandWidthEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1		not-accessible	The entry of table hpnicfOnuBandWidthTable.
T/F hpnicfOnuDownStreamBandWidthPolicy	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.1	TruthValue	read-write	true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
I32 hpnicfOnuDownStreamMaxBandWidth	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.2	Integer32	read-write	Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
I32 hpnicfOnuDownStreamMaxBurstSize	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.3	Integer32	read-write	Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
T/F hpnicfOnuDownStreamHighPriorityFirst	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.4	TruthValue	read-write	true:Enable high priority frames preference. false:Disable high priority frames preference.
T/F hpnicfOnuDownStreamShortFrameFirst	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.5	TruthValue	read-write	true:Enable short frames preference. false:Disable short frames preference.
T/F hpnicfOnuP2PBandWidthPolicy	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.6	TruthValue	read-write	true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
I32 hpnicfOnuP2PMaxBandWidth	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.7	Integer32	read-write	Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
I32 hpnicfOnuP2PMaxBurstSize	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.8	Integer32	read-write	Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
T/F hpnicfOnuP2PHighPriorityFirst	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.9	TruthValue	read-write	true:Enable high priority frames preference. false:Disable high priority frames preference.
T/F hpnicfOnuP2PShortFrameFirst	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.10	TruthValue	read-write	true:Enable short frames preference. false:Disable short frames preference.
hpnicfOnuSlaManTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4		not-accessible	Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm.
hpnicfOnuSlaManEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1		not-accessible	The entry of table hpnicfOnuSlaManTable.
I32 hpnicfOnuSlaMaxBandWidth	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.1	Integer32	read-write	Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.
I32 hpnicfOnuSlaMinBandWidth	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.2	Integer32	read-write	Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.
I32 hpnicfOnuSlaBandWidthStepVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.3	Integer32	read-only	Granularity of bandwidth - measured in Kbit/s. The value of hpnicfOnuSlaMaxBandWidth and hpnicfOnuSlaMinBandWidth should be the multiple of the value of this object.
INT hpnicfOnuSlaDelay	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.4	INTEGER	read-write	low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.
I32 hpnicfOnuSlaFixedBandWidth	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.5	Integer32	read-write	Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal.
I32 hpnicfOnuSlaPriorityClass	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.6	Integer32	read-write	Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.
I32 hpnicfOnuSlaFixedPacketSize	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.7	Integer32	read-write	Fixed packet size - measured in byte. The value of this object should be valid when hpnicfOnuSlaFixedBandWidth is configured.
hpnicfOnuInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5		not-accessible	Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (hpnicfOnuHardMajorVersion, hpnicfOnuHardMinorVersion, hpnicfOnuUniMacType) (2)Several physical capabilities of the ONU. (hpnicfOnuLaserOnTime, hpnicfOnuLaserOffTime, hpnicfOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (hpnicfOnuWorkMode)
hpnicfOnuInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1		not-accessible	The entry of the hpnicfOnuInfoTable.
OCT hpnicfOnuHardMajorVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.1	OCTET STRING	read-only	ONU hardware major version. If the object length is zero, it means the version is unknown.
OCT hpnicfOnuHardMinorVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.2	OCTET STRING	read-only	ONU hardware minor version. If the object length is zero, it means the version is unknown.
OCT hpnicfOnuSoftwareVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.3	OCTET STRING	read-only	ONU software version.
INT hpnicfOnuUniMacType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.4	INTEGER	read-only	ONU User Network Interface(UNI) port MAC type.
I32 hpnicfOnuLaserOnTime	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.5	Integer32	read-only	The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOnTime is unknown.
I32 hpnicfOnuLaserOffTime	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.6	Integer32	read-only	The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOffTime is unknown.
I32 hpnicfOnuGrantFifoDep	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.7	Integer32	read-only	Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.
INT hpnicfOnuWorkMode	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.8	INTEGER	read-only	The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network.
OCT hpnicfOnuPCBVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.9	OCTET STRING	read-only	ONU PCB version.
U32 hpnicfOnuRtt	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.10	Unsigned32	read-only	The signal round-trip-time(RTT) received.
OCT hpnicfOnuEEPROMVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.11	OCTET STRING	read-only	ONU EEPROM version.
OCT hpnicfOnuRegType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.12	OCTET STRING	read-only	ONU registered type.
OCT hpnicfOnuHostType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.13	OCTET STRING	read-only	ONU host type.
I32 hpnicfOnuDistance	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.14	Integer32	read-only	The distance between OLT and ONU, measured in meter.
I32 hpnicfOnuLlid	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.15	Integer32	read-only	The link layer identifier, which uniquely identifies the ONU of a specific OLT.
OCT hpnicfOnuVendorId	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.16	OCTET STRING	read-only	ONU vendor ID.
OCT hpnicfOnuFirmwareVersion	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.17	OCTET STRING	read-only	ONU firmware version.
I32 hpnicfOnuOpticalPowerReceivedByOlt	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.18	Integer32	read-only	The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.
hpnicfOnuMacAddrInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6		not-accessible	This table used for getting MAC address information of ONU.
hpnicfOnuMacAddrInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1		not-accessible	The entry of the hpnicfEponOnuMacAddrInfoTable.
I32 hpnicfOnuMacIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.1	Integer32	not-accessible	The index of ONUs in one OLT.
INT hpnicfOnuMacAddrFlag	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.2	INTEGER	read-only	The flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT and registered on another OLT.
MAC hpnicfOnuMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.3	MacAddress	read-only	The MAC address of ONU.
hpnicfOnuBindMacAddrTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7		not-accessible	This table implements the following functions for ONUs: Bind MAC of ONU.
hpnicfOnuBindMacAddrEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1		not-accessible	The entry of the table hpnicfOnuBindMacAddrTable.
MAC hpnicfOnuBindMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.1	MacAddress	read-write	Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values.
I32 hpnicfOnuBindType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.2	Integer32	read-write	Set the binding type with the ONU which is confined to the index of hpnicfEponOnuTypeDescr.
hpnicfOnuFirmwareUpdateTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8		not-accessible	This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware.
hpnicfOnuFirmwareUpdateEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1		not-accessible	The entry of the table hpnicfOnuFirmwareUpdateTable.
INT hpnicfOnuUpdate	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.1	INTEGER	read-write	update(1): Update the ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.
INT hpnicfOnuUpdateResult	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.2	INTEGER	read-only	The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown.
OCT hpnicfOnuUpdateFileName	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.3	OCTET STRING	read-write	The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
I32 hpnicfOnuLinkTestFrameNumMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.9	Integer32	read-only	The lower limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum.
I32 hpnicfOnuLinkTestFrameNumMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.10	Integer32	read-only	The upper limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum.
I32 hpnicfOnuSlaMaxBandWidthMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.11	Integer32	read-only	The lower limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth.
I32 hpnicfOnuSlaMaxBandWidthMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.12	Integer32	read-only	The upper limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth.
I32 hpnicfOnuSlaMinBandWidthMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.13	Integer32	read-only	The lower limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth.
I32 hpnicfOnuSlaMinBandWidthMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.14	Integer32	read-only	The upper limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth.
hpnicfEponOnuTypeManTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15		not-accessible	This table is used for getting ONU bind type in current version.
hpnicfEponOnuTypeManEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1		not-accessible	The entry of the hpnicfEponOnuTypeManTable.
I32 hpnicfEponOnuTypeIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.1	Integer32	not-accessible	The ONU type index.
OCT hpnicfEponOnuTypeDescr	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.2	OCTET STRING	read-only	The ONU type description which can be used to bind ONU in current version. the value of hpnicfOnuBindType can be configured by the index of hpnicfEponOnuTypeDescr.
hpnicfOnuPacketManTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16		not-accessible	This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode.
hpnicfOnuPacketManEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1		not-accessible	The entry of the hpnicfOnuPacketManTable.
INT hpnicfOnuPriorityTrust	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.1	INTEGER	read-write	The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.
INT hpnicfOnuQueueScheduler	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.2	INTEGER	read-write	The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.
hpnicfOnuProtocolTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17		not-accessible	This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping.
hpnicfOnuProtocolEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1		not-accessible	The entry of hpnicfOnuProtocolTable.
T/F hpnicfOnuStpStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.1	TruthValue	read-write	true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.
T/F hpnicfOnuIgmpSnoopingStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.2	TruthValue	read-write	true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.
T/F hpnicfOnuDhcpsnoopingOption82	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.3	TruthValue	read-write	true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.
T/F hpnicfOnuDhcpsnooping	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.4	TruthValue	read-write	true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.
T/F hpnicfOnuPppoe	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.5	TruthValue	read-write	true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.
I32 hpnicfOnuIgmpSnoopingHostAgingT	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.6	Integer32	read-write	Set the host aging time of IGMP on ONU.
I32 hpnicfOnuIgmpSnoopingMaxRespT	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.7	Integer32	read-write	Set the max response time of IGMP on ONU.
I32 hpnicfOnuIgmpSnoopingRouterAgingT	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.8	Integer32	read-write	Set the router aging time of IGMP on ONU.
T/F hpnicfOnuIgmpSnoopingAggReportS	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.9	TruthValue	read-write	true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.
T/F hpnicfOnuIgmpSnoopingAggLeaveS	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.10	TruthValue	read-write	true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.
hpnicfOnuDot1xTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18		not-accessible	This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable.
hpnicfOnuDot1xEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1		not-accessible	The entry of the hpnicfOnuDot1xTable.
OCT hpnicfOnuDot1xAccount	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.1	OCTET STRING	read-write	ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hpnicfOnuDot1xPassword.
OCT hpnicfOnuDot1xPassword	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.2	OCTET STRING	read-write	ONU 802.1X password. The object should be set together with hpnicfOnuDot1xAccount.
hpnicfOnuPriorityQueueTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19		not-accessible	This table contains specific information of priority queue.
hpnicfOnuPriorityQueueEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1		not-accessible	The entry of hpnicfOnuPriorityQueueTable.
INT hpnicfOnuQueueDirection	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.1	INTEGER	not-accessible	The direction of priority queue.
I32 hpnicfOnuQueueId	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.2	Integer32	not-accessible	The queue ID of priority queue.
I32 hpnicfOnuQueueSize	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.3	Integer32	read-write	The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of hpnicfOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100.
hpnicfOnuCountTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20		not-accessible	This table contains statistics of ONU port.
hpnicfOnuCountEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1		not-accessible	The entry of hpnicfOnuCountTable.
C64 hpnicfOnuInCRCErrPktsEx	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.1	Counter64	read-only	The total number of frames received with bad CRC checksum.
C64 hpnicfOnuOutDroppedFrames	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.2	Counter64	read-only	The total number of frames dropped because of buffer failure.
hpnicfEponOnuScalarGroup	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21
I32 hpnicfOnuPriorityQueueSizeMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.1	Integer32	read-only	The lower limit of queue size which is confined to hpnicfOnuQueueSize.
I32 hpnicfOnuPriorityQueueSizeMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.2	Integer32	read-only	The upper limit of queue size which is confined to hpnicfOnuQueueSize.
I32 hpnicfOnuPriorityQueueBandwidthMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.3	Integer32	read-only	The lower limit of hpnicfOnuQueueMaxBandwidth.
I32 hpnicfOnuPriorityQueueBandwidthMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.4	Integer32	read-only	The upper limit of hpnicfOnuQueueMaxBandwidth.
I32 hpnicfOnuPriorityQueueBurstsizeMinVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.5	Integer32	read-only	The lower limit of hpnicfOnuQueueMaxBurstsize.
I32 hpnicfOnuPriorityQueueBurstsizeMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.6	Integer32	read-only	The upper limit of hpnicfOnuQueueMaxBurstsize.
I32 hpnicfOnuUpdateByTypeNextIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.7	Integer32	read-only	Offer a free index of hpnicfOnuFirmwareUpdateByTypeTable.
hpnicfOnuQueueBandwidthTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22		not-accessible	This table contains specific bandwidth information of ONU priority queue.
hpnicfOnuQueueBandwidthEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1		not-accessible	The entry of hpnicfOnuQueueBandwidthTable.
I32 hpnicfOnuQueueMaxBandwidth	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.1	Integer32	read-write	The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.
I32 hpnicfOnuQueueMaxBurstsize	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.2	Integer32	read-write	The maximum burst size of specific ONU priority queue, measured in 64Bytes.
T/F hpnicfOnuQueuePolicyStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.3	TruthValue	read-write	true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.
hpnicfOnuIpAddressTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23		not-accessible	ONU IP address table.
hpnicfOnuIpAddressEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1		not-accessible	The entry of hpnicfOnuIpAddressTable.
IP hpnicfOnuIpAddress	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.1	IpAddress	read-write	The IP address assigned to the ONU.
IP hpnicfOnuIpAddressMask	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.2	IpAddress	read-write	The mask of IP address denoted by hpnicfOnuIpAddress.
IP hpnicfOnuIpAddressGateway	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.3	IpAddress	read-write	The gateway of IP address denoted by hpnicfOnuIpAddress.
T/F hpnicfOnuDhcpallocate	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.4	TruthValue	read-write	true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.
I32 hpnicfOnuManageVID	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.5	Integer32	read-write	The management VLAN of ONU denoted by hpnicfOnuManageVID.
T/F hpnicfOnuManageVlanIntfS	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.6	TruthValue	read-write	The management interface status of ONU denoted by hpnicfOnuManageVlanIntfS.
hpnicfOnuChipSetInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24		not-accessible	ONU vendor specific information of ONU.
hpnicfOnuChipSetInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1		not-accessible	The entry of hpnicfOnuChipSetInfoTable.
OCT hpnicfOnuChipSetVendorId	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.1	OCTET STRING	read-only	Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.
OCT hpnicfOnuChipSetModel	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.2	OCTET STRING	read-only	Chip model, numbering(range from 0 to 0xFF) by the chip vendor.
I32 hpnicfOnuChipSetRevision	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.3	Integer32	read-only	Chip revision.
DAT hpnicfOnuChipSetDesignDate	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.4	DateAndTime	read-only	Chip design date.
hpnicfOnuCapabilityTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25		not-accessible	Capability of ONU.
hpnicfOnuCapabilityEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1		not-accessible	The entry of the table hpnicfOnuCapabilityTable.
BIT hpnicfOnuServiceSupported	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.1	Bits	read-only	Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service.
I32 hpnicfOnuGEPortNumber	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.2	Integer32	read-only	The current gigabit ethernet ports number supported by the ONU.
I32 hpnicfOnuFEPortNumber	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.3	Integer32	read-only	the current fast ethernet ports number supported by the ONU.
I32 hpnicfOnuPOTSPortNumber	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.4	Integer32	read-only	The current POTS ports number supported by the ONU
I32 hpnicfOnuE1PortsNumber	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.5	Integer32	read-only	The current E1 ports number supported by the ONU.
I32 hpnicfOnuUpstreamQueueNumber	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.6	Integer32	read-only	The number of upstream queues supported by the ONU.
I32 hpnicfOnuMaxUpstreamQueuePerPort	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.7	Integer32	read-only	The number of maximum upstream queues per port of the ONU.
I32 hpnicfOnuDownstreamQueueNumber	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.8	Integer32	read-only	The number of downstream queues supported by the ONU.
I32 hpnicfOnuMaxDownstreamQueuePerPort	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.9	Integer32	read-only	The number of maximum downstream queues per port of the ONU.
T/F hpnicfOnuBatteryBackup	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.10	TruthValue	read-only	true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.
T/F hpnicfOnuIgspFastLeaveSupported	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.11	TruthValue	read-only	true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.
T/F hpnicfOnuMCtrlFastLeaveSupported	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.12	TruthValue	read-only	true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.
hpnicfOnuDbaReportTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26		not-accessible	This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames.
hpnicfOnuDbaReportEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1		not-accessible	The entry of the table hpnicfOnuDbaReportTable.
I32 hpnicfOnuDbaReportQueueId	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.1	Integer32	not-accessible	The DBA report queue ID.
I32 hpnicfOnuDbaReportThreshold	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.2	Integer32	read-write	The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0
INT hpnicfOnuDbaReportStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.3	INTEGER	read-write	enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.
hpnicfOnuCosToLocalPrecedenceTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27		not-accessible	Table of map of the COS to local-precedence.
hpnicfOnuCosToLocalPrecedenceEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1		not-accessible	Configuration information of map of the COS to local precedence.
I32 hpnicfOnuCosToLocalPrecedenceCosIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.1	Integer32	read-only	Index of the map, obtains from packet cos value.
I32 hpnicfOnuCosToLocalPrecedenceValue	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.2	Integer32	read-write	Value of local precedence.
hpnicfEponOnuStpPortTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28		not-accessible	Table of ONU STP ports.
hpnicfEponOnuStpPortEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1		not-accessible	Configuration information of ONU STP ports.
I32 hpnicfEponStpPortIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.1	Integer32	accessible-for-notify	The index of the STP ports.
OCT hpnicfEponStpPortDescr	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.2	OCTET STRING	accessible-for-notify	The description of the STP ports.
INT hpnicfEponStpPortState	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.3	INTEGER	accessible-for-notify	The current state of the port (i.e. disabled, discarding, learning and forwarding).
hpnicfOnuPhysicalTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29		not-accessible	This table is used for getting ONU physical information.
hpnicfOnuPhysicalEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1		not-accessible	The entry of the hpnicfOnuPhysicalTable.
MAC hpnicfOnuBridgeMac	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.1	MacAddress	read-only	The bridge MAC address of ONU.
MAC hpnicfOnuFirstPonMac	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.2	MacAddress	read-only	The MAC address of ONU first PON port.
INT hpnicfOnuFirstPonRegState	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.3	INTEGER	read-only	The register state of ONU first PON port.
MAC hpnicfOnuSecondPonMac	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.4	MacAddress	read-only	The MAC address of ONU second PON port.
INT hpnicfOnuSecondPonRegState	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.5	INTEGER	read-only	The register state of ONU second PON port.
hpnicfOnuSmlkTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30		not-accessible	This table is used for getting ONU SMLK information.
hpnicfOnuSmlkEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1		not-accessible	The entry of the hpnicfOnuSmlkTable.
I32 hpnicfOnuSmlkGroupID	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.1	Integer32	read-only	The SMLK group ID of ONU.
INT hpnicfOnuSmlkFirstPonRole	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.2	INTEGER	read-only	The role of ONU first PON port in a SMLK group.
INT hpnicfOnuSmlkFirstPonStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.3	INTEGER	read-only	The transmitting status of ONU first PON port in a SMLK group.
INT hpnicfOnuSmlkSecondPonRole	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.4	INTEGER	read-only	The role of ONU second PON port in a SMLK group.
INT hpnicfOnuSmlkSecondPonStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.5	INTEGER	read-only	The transmitting status of ONU second PON port in a SMLK group.
hpnicfOnuRS485PropertiesTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31		not-accessible	Property table.
hpnicfOnuRS485PropertiesEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1		not-accessible	The entry of property table.
I32 hpnicfOnuRS485SerialIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.1	Integer32	not-accessible	The index of serial port.
INT hpnicfOnuRS485BaudRate	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.2	INTEGER	read-write	The port baud rate.
INT hpnicfOnuRS485DataBits	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.3	INTEGER	read-write	The port number of data bits in a character.
INT hpnicfOnuRS485Parity	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.4	INTEGER	read-write	The port sense of a character parity bit.
INT hpnicfOnuRS485StopBits	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.5	INTEGER	read-write	The port number of stop bits.
INT hpnicfOnuRS485FlowControl	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.6	INTEGER	read-write	The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.
I32 hpnicfOnuRS485TXOctets	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.7	Integer32	read-only	The number of output octets about the port. The unit is byte.
I32 hpnicfOnuRS485RXOctets	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.8	Integer32	read-only	The number of input octets about the port. The unit is byte.
I32 hpnicfOnuRS485TXErrOctets	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.9	Integer32	read-only	The number of output error octets about the port. The unit is byte.
I32 hpnicfOnuRS485RXErrOctets	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.10	Integer32	read-only	The number of input error octets about the port. The unit is byte.
INT hpnicfOnuRS485ResetStatistics	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.11	INTEGER	read-write	Reset the counters to zero, including hpnicfOnuRS485TXOctets, hpnicfOnuRS485RXOctets, hpnicfOnuRS485TXErrOctets and hpnicfOnuRS485RXErrOctets.
hpnicfOnuRS485SessionSummaryTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32		not-accessible	Session summary table.
hpnicfOnuRS485SessionSummaryEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1		not-accessible	The entry of session summary table.
I32 hpnicfOnuRS485SessionMaxNum	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.1	Integer32	read-only	The max session number of every serial port which can be supported.
I32 hpnicfOnuRS485SessionNextIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.2	Integer32	read-only	The next valid index used for creating a new session raw. When there is no valid index left, it will return 0.
hpnicfOnuRS485SessionTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33		not-accessible	RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets.
hpnicfOnuRS485SessionEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1		not-accessible	The entry of session table.
I32 hpnicfOnuRS485SessionIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.1	Integer32	not-accessible	Raw session index.
INT hpnicfOnuRS485SessionType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.2	INTEGER	read-create	The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
IPt hpnicfOnuRS485SessionAddType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.3	InetAddressType	read-create	This object indicates the transport type of the address contained in hpnicfOnuRS485SessionRemoteIP object.
IP hpnicfOnuRS485SessionRemoteIP	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.4	InetAddress	read-create	The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.
I32 hpnicfOnuRS485SessionRemotePort	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.5	Integer32	read-create	The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.
I32 hpnicfOnuRS485SessionLocalPort	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.6	Integer32	read-create	Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.
ROW hpnicfOnuRS485SessionRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.7	RowStatus	read-create	The status used for creating, modifying, and deleting instances of the columnar objects in raw session table.
hpnicfOnuRS485SessionErrInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34		not-accessible	Error information table. When failed to create a session, error information can be got from this table.
hpnicfOnuRS485SessionErrInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1		not-accessible	The entry of error information table.
STR hpnicfOnuRS485SessionErrInfo	1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1.1	DisplayString	read-only	Error information string. When a response with 'noCreeation' for row creation in table hpnicfOnuRS485SessionTable, the error reason can be got from this object.
hpnicfEponBatchOperationMan	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6
hpnicfEponBatchOperationBySlotTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1		not-accessible	This table is used for batch operation by slot.
hpnicfEponBatchOperationBySlotEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1		not-accessible	The entry of the hpnicfEponBatchOperationBySlotTable.
I32 hpnicfEponBatchOperationBySlotIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.1	Integer32	not-accessible	The EPON board index.
INT hpnicfEponBatchOperationBySlotType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.2	INTEGER	read-write	The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hpnicfEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.
INT hpnicfEponBatchOperationBySlot	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.3	INTEGER	read-write	Execute batch operation.
I32 hpnicfEponBatchOperationBySlotResult	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.4	Integer32	read-only	The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype.
hpnicfEponBatchOperationByOLTTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2		not-accessible	This table is used for batch operation by OLT.
hpnicfEponBatchOperationByOLTEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1		not-accessible	The entry of the hpnicfEponBatchOperationByOLTTable.
INT hpnicfEponBatchOperationByOLTType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.1	INTEGER	read-write	The types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.
INT hpnicfEponBatchOperationByOLT	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.2	INTEGER	read-write	Execute batch operation.
I32 hpnicfEponBatchOperationByOLTResult	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.3	Integer32	read-only	The result of batch operation: 0xFFFF -- other, gernal error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype.
hpnicfOnuFirmwareUpdateByTypeTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3		not-accessible	This table is used to update ONU by ONU type.
hpnicfOnuFirmwareUpdateByTypeEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1		not-accessible	The entry of the hpnicfOnuFirmwareUpdateByTypeTable.
I32 hpnicfOnuUpdateByOnuTypeIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.1	Integer32	not-accessible	The type and file relationship table entry index.
OCT hpnicfOnuUpdateByTypeOnuType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.2	OCTET STRING	read-create	The type of ONUs.
OCT hpnicfOnuUpdateByTypeFileName	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.3	OCTET STRING	read-create	The file to be updated for the type of ONUs.
ROW hpnicfOnuUpdateByTypeRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.4	RowStatus	read-create	The status of this table entry. Only createAndGo and destroy actions are supported.
hpnicfEponErrorInfo	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7
I32 hpnicfEponSoftwareErrorCode	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.1	Integer32	accessible-for-notify	OLT software error code.
I32 hpnicfOamVendorSpecificAlarmCode	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.2	Integer32	accessible-for-notify	Alarm code of the vendor.
OCT hpnicfEponOnuRegErrorMacAddr	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.3	OCTET STRING	accessible-for-notify	The MAC of ONU registered error.
U32 hpnicfOamEventLogType	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.4	Unsigned32	accessible-for-notify	The type of event that generated this entry in the event log.
INT hpnicfOamEventLogLocation	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.5	INTEGER	accessible-for-notify	Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM.
I32 hpnicfEponLoopbackPortIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.6	Integer32	accessible-for-notify	The index of port which generate loop back event.
OCT hpnicfEponLoopbackPortDescr	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.7	OCTET STRING	accessible-for-notify	A textual string containing information about the port generated loop back event.
U32 hpnicfOltPortAlarmLlidMisFrames	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.8	Unsigned32	accessible-for-notify	the amount of mismatched frames about the LLID mismatch alarm.
U32 hpnicfOltPortAlarmBer	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.9	Unsigned32	accessible-for-notify	error bit rate.
U32 hpnicfOltPortAlarmFer	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.10	Unsigned32	accessible-for-notify	error frames rate.
OCT hpnicfEponOnuRegSilentMac	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.11	OCTET STRING	accessible-for-notify	The MAC of silent ONU.
OCT hpnicfEponOperationResult	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.12	OCTET STRING	accessible-for-notify	The result of EPON operation.
INT hpnicfEponOnuLaserState	1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.13	INTEGER	accessible-for-notify	The state of ONU laser.
hpnicfEponTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8
hpnicfEponTrapPrefix	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0
NTF hpnicfEponPortAlarmBerTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.1			A hpnicfEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected.
NTF hpnicfEponPortAlarmFerTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.2			A hpnicfEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected.
NTF hpnicfEponErrorLLIDFrameTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.3			A hpnicfEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected.
NTF hpnicfEponLoopBackEnableTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.4			A hpnicfEponLoopBackEnableTrap notification is sent when the loop back command is committed.
NTF hpnicfEponOnuRegistrationErrTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.5			A hpnicfEponOnuRegistrationErrTrap notification is sent when a ONU register failed.
NTF hpnicfEponOamDisconnectionTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.6			A hpnicfEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
NTF hpnicfEponEncryptionKeyErrTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.7			A hpnicfEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad.
NTF hpnicfEponRemoteStableTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.8			A hpnicfEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information.
NTF hpnicfEponLocalStableTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.9			A hpnicfEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information.
NTF hpnicfEponOamVendorSpecificTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.10			A hpnicfEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised.
NTF hpnicfEponSoftwareErrTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.11			A hpnicfEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs.
NTF hpnicfEponPortAlarmBerRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.12			A hpnicfEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered.
NTF hpnicfEponPortAlarmFerRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.13			A hpnicfEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd.
NTF hpnicfEponErrorLLIDFrameRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.14			A hpnicfEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd.
NTF hpnicfEponLoopBackEnableRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.15			A hpnicfEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd.
NTF hpnicfEponOnuRegistrationErrRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.16			A hpnicfEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again.
NTF hpnicfEponOamDisconnectionRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.17			A hpnicfEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
NTF hpnicfEponEncryptionKeyErrRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.18			A hpnicfEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right.
NTF hpnicfEponRemoteStableRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.19			A hpnicfEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized.
NTF hpnicfEponLocalStableRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.20			A hpnicfEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized.
NTF hpnicfEponOamVendorSpecificRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.21			A hpnicfEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered.
NTF hpnicfEponSoftwareErrRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.22			A hpnicfEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered.
NTF hpnicfDot3OamThresholdRecoverEvent	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.23			A hpnicfDot3OamThresholdRecoverEvent notification is sent when hpnicfDot3OamThresholdEvent is detected and then recoverd.
NTF hpnicfDot3OamNonThresholdRecoverEvent	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.24			A hpnicfDot3OamNonThresholdRecoverEvent notification is sent when hpnicfDot3OamNonThresholdEvent is detected and then recoverd.
NTF hpnicfEponOnuRegExcessTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.25			A hpnicfEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit.
NTF hpnicfEponOnuRegExcessRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.26			A hpnicfEponOnuRegExcessRecoverTrap notification is sent when hpnicfEponOnuRegExcessTrap is detected and then recoverd.
NTF hpnicfEponOnuPowerOffTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.27			A hpnicfEponOnuPowerOffTrap notification is sent when ONU is power off.
NTF hpnicfEponOltSwitchoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.28			A hpnicfEponOltSwithoverTrap notification is sent when OLT switchover is detected.
NTF hpnicfEponOltDFETrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.29			A hpnicfEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT.
NTF hpnicfEponOltDFERecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.30			A hpnicfEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd.
NTF hpnicfEponOnuSilenceTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.31			The hpnicfEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT.
NTF hpnicfEponOnuSilenceRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.32			The hpnicfEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout.
NTF hpnicfEponOnuUpdateResultTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.33			A hpnicfEponUpdateResultTrap notification is sent when an ONU reported its firmware update result.
NTF hpnicfEponOnuAutoBindTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.34			A hpnicfEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically.
NTF hpnicfEponOnuPortStpStateTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.35			A hpnicfEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment.
NTF hpnicfEponOnuLaserFailedTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.36			A hpnicfEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life).
NTF hpnicfOnuSmlkSwitchoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.37			A hpnicfOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected.
hpnicfEponStat	1.3.6.1.4.1.11.2.14.11.15.2.42.1.9
hpnicfEponStatTable	1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1		not-accessible	This table contains line code error statistics of epon port.
hpnicfEponStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1		not-accessible	The entry of hpnicfEponStatTable.
C64 hpnicfEponStatFER	1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.1	Counter64	read-only	The frame error rate of epon port, measured in 1e-9 unit.
C64 hpnicfEponStatBER	1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.2	Counter64	read-only	The bit error rate of epon port, measured in 1e-9 unit.

RFC description

Hewlett-Packard EPON (Ethernet Passive Optical Network) MIB for managing OLT and ONU devices, QoS, and fiber optics.

Start monitoring HP/H3C Comware-based EPON OLT and ONU access equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-EPON-MIB