A3COM-HUAWEI-LswIGSP-MIB

All MIBs › A3COM-HUAWEI-LswIGSP-MIB

Last Updated: 2001-06-29

Category: VLAN and Bridging, Vendor: H3C/HH3C

Description: Handles IGMP Snooping multicast group membership and port tracking on H3C LAN switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-LswIGSP-MIB?

A3COM-HUAWEI-LswIGSP-MIB is an H3C enterprise MIB for IGMP Snooping, a Layer-2 feature that tracks IGMP multicast group membership on switch ports so multicast traffic is forwarded only to interested receivers rather than flooded. No module description or sample objects were supplied in the source data, so specific object names cannot be confirmed. Based on its purpose, its monitoring role would be multicast-group and port-membership visibility: exposing which ports have joined which multicast groups and VLAN-level snooping enable state, used to diagnose multicast delivery problems (e.g., a receiver not getting stream traffic) rather than hardware health. It likely complements standard multicast MIBs (such as IGMP-STD-MIB) conceptually, though no explicit dependency is stated here. It would be deployed on H3C/3Com LAN switches carrying IPTV, video conferencing, or other multicast application traffic, where A3COM-HUAWEI-LswIGSP-MIB SNMP monitoring helps diagnose multicast delivery problems.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-LswIGSP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/3Com LAN switches

Monitoring Examples

No sample objects or module description were available for this MIB, so no concrete object names can be honestly cited. Typically a MIB of this type would expose a port/VLAN-to-multicast-group membership table that an admin polls to confirm a given switch port is correctly registered as a member of an expected multicast group. Without source data, a more specific monitoring scenario cannot be described with confidence.

Imported Objects

From A3COM-HUAWEI-OID-MIB

lswCommon

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwLswIgmpsnoopingMib	1.3.6.1.4.1.43.45.1.2.23.1.7
hwLswIgmpsnoopingMibObject	1.3.6.1.4.1.43.45.1.2.23.1.7.1
ENA hwIgmpSnoopingStatus	1.3.6.1.4.1.43.45.1.2.23.1.7.1.1	EnabledStatus	read-write	Configure to enable IGMP Snooping.
INT hwIgmpSnoopingRouterPortAge	1.3.6.1.4.1.43.45.1.2.23.1.7.1.2	INTEGER	read-write	Configure the aging time of the router port.
INT hwIgmpSnoopingResponseTime	1.3.6.1.4.1.43.45.1.2.23.1.7.1.3	INTEGER	read-write	Configure the maximum query response time.
INT hwIgmpSnoopingHostTime	1.3.6.1.4.1.43.45.1.2.23.1.7.1.4	INTEGER	read-write	Configure the aging time of the multicast group port.
hwIgmpSnoopingGroupLimitTable	1.3.6.1.4.1.43.45.1.2.23.1.7.1.5		not-accessible	The table lists the maximum group number that one interface could do IGMP Snooping.
hwIgmpSnoopingGroupLimitEntry	1.3.6.1.4.1.43.45.1.2.23.1.7.1.5.1		not-accessible	An entry (conceptual row) representing the maximum group number on an interface which IGMP Snooping operation is enabled.
NUM hwIgmpSnoopingGroupIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.7.1.5.1.1	InterfaceIndex	not-accessible	The ifIndex value of the port on which IGMP snooping is enabled.
U32 hwIgmpSnoopingGroupLimitNumber	1.3.6.1.4.1.43.45.1.2.23.1.7.1.5.1.2	Unsigned32	read-write	The maxmum group number of IGMP Snooping on a port.
hwIgmpSnoopingFastLeaveTable	1.3.6.1.4.1.43.45.1.2.23.1.7.1.6		not-accessible	The table specifies the fast leave status on those ports that do IGMP Snooping.
hwIgmpSnoopingFastLeaveEntry	1.3.6.1.4.1.43.45.1.2.23.1.7.1.6.1		not-accessible	An entry specifies the fast leave status on those ports that do IGMP Snooping.
NUM hwIgmpSnoopingFastLeaveIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.7.1.6.1.1	InterfaceIndex	not-accessible	The ifIndex value of the port on which IGMP snooping is enabled.
ENA hwIgmpSnoopingFastLeaveStatus	1.3.6.1.4.1.43.45.1.2.23.1.7.1.6.1.2	EnabledStatus	read-write	The fast leave status of the port on which IGMP Snooping is enabled.
hwIgmpSnoopingGroupPolicyTable	1.3.6.1.4.1.43.45.1.2.23.1.7.1.7		not-accessible	This is a table specifies the group policy parameter and Vlan ID of the IGMP Snooping port.
hwIgmpSnoopingGroupPolicyEntry	1.3.6.1.4.1.43.45.1.2.23.1.7.1.7.1		not-accessible	An entry representing the group policy parameter and Vlan ID of a port on which IGMP Snooping operation is enabled.
NUM hwIgmpSnoopingGroupPolicyIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.7.1.7.1.1	InterfaceIndex	not-accessible	The ifIndex value of the port on which IGMP Snooping is enabled.
I32 hwIgmpSnoopingGroupPolicyVlanID	1.3.6.1.4.1.43.45.1.2.23.1.7.1.7.1.2	Integer32	not-accessible	The Vlan ID which the IGMP Snooping port is attached to.
I32 hwIgmpSnoopingGroupPolicyParameter	1.3.6.1.4.1.43.45.1.2.23.1.7.1.7.1.3	Integer32	read-create	The ACL Number which is used as the group policy parameter of the IGMP Snooping port.
ROW hwIgmpSnoopingGroupPolicyStatus	1.3.6.1.4.1.43.45.1.2.23.1.7.1.7.1.4	RowStatus	read-create	This object is used to create or delete a row and represent the current status of this row. Now support three state:CreateAndGo,Active,Destroy.
ENA hwIgmpSnoopingNonFloodingStatus	1.3.6.1.4.1.43.45.1.2.23.1.7.1.8	EnabledStatus	read-write	Configure to disable multicast flooding when no member exists in the destinated group. To use this function,IGMP snooping must be enabled.
hwIgmpSnoopingVlanStatusTable	1.3.6.1.4.1.43.45.1.2.23.1.7.1.9		not-accessible	The table used to enable or disable IGMP snooping on the specified VLAN.
hwIgmpSnoopingVlanStatusEntry	1.3.6.1.4.1.43.45.1.2.23.1.7.1.9.1		not-accessible	An entry representing the IGMP snooping status on the specified VLAN.
I32 hwIgmpSnoopingVlanID	1.3.6.1.4.1.43.45.1.2.23.1.7.1.9.1.1	Integer32	not-accessible	An index uniquely identifies on which VLAN IGMP snooping is enabled or disabled.
ENA hwIgmpSnoopingVlanEnabled	1.3.6.1.4.1.43.45.1.2.23.1.7.1.9.1.2	EnabledStatus	read-write	Indicating whether IGMP snooping is enabled on this VLAN.
hwIgmpSnoopingStatsObjects	1.3.6.1.4.1.43.45.1.2.23.1.7.1.10
C32 hwRecvIGMPGQueryNum	1.3.6.1.4.1.43.45.1.2.23.1.7.1.10.1	Counter32	read-only	The statistics of IGMP general query packets received on the device.
C32 hwRecvIGMPSQueryNum	1.3.6.1.4.1.43.45.1.2.23.1.7.1.10.2	Counter32	read-only	The statistics of IGMP specific query packets received on the device.
C32 hwRecvIGMPV1ReportNum	1.3.6.1.4.1.43.45.1.2.23.1.7.1.10.3	Counter32	read-only	The statistics of IGMP V1 report packets received on the device.
C32 hwRecvIGMPV2ReportNum	1.3.6.1.4.1.43.45.1.2.23.1.7.1.10.4	Counter32	read-only	The statistics of IGMP V2 report packets received on the device.
C32 hwRecvIGMPLeaveNum	1.3.6.1.4.1.43.45.1.2.23.1.7.1.10.5	Counter32	read-only	The statistics of IGMP leave packets received on the device.
C32 hwRecvErrorIGMPPacketNum	1.3.6.1.4.1.43.45.1.2.23.1.7.1.10.6	Counter32	read-only	The statistics of error IGMP packets received on the device.
C32 hwSentIGMPSQueryNum	1.3.6.1.4.1.43.45.1.2.23.1.7.1.10.7	Counter32	read-only	The statistics of IGMP specific query packets sent from the device.
INT hwIgmpSnoopingClearStats	1.3.6.1.4.1.43.45.1.2.23.1.7.1.10.8	INTEGER	read-write	The configuration to clear the statistics of IGMP packets.

RFC description

Manages IGMP Snooping multicast group membership and port tracking on H3C LAN switch devices.

Start monitoring H3C/3Com LAN switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-LswIGSP-MIB

What Is A3COM-HUAWEI-LswIGSP-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description