HPN-ICF-CONFIG-MAN-MIB

All MIBs › HPN-ICF-CONFIG-MAN-MIB

Last Updated: 2011-11-26

Category: Device Management, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: HP Networking ICF SNMP MIB for configuration management including config file operations and version tracking on HP networking devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-CONFIG-MAN-MIB?

HPN-ICF-CONFIG-MAN-MIB manages configuration data for HP Networking (H3C Comware-based) devices, modeling the running and startup configuration state and providing a change-log mechanism for tracking configuration modifications over time. It exposes objects like hpnicfCfgRunModifiedLast, hpnicfCfgRunSavedLast, and hpnicfCfgStartModifiedLast to track when the running/startup configs were last changed or saved, plus a hpnicfCfgLogTable recording each configuration change event with timestamp, source command, and source data. This MIB is squarely about monitoring the software/configuration status of the device: it lets an admin detect unsaved configuration changes (running config modified after last save), audit who/what issued a given config change, and confirm whether config logging has begun dropping entries via hpnicfCfgLogLimitedEntries/hpnicfCfgLogDeletedEntries. It models configuration data conceptually but has no strong dependency on other standard MIBs beyond the vendor's own ICF framework. It is deployed on H3C/HP Networking switches and routers where configuration-change auditing and drift detection are required. Engineers can download the HPN-ICF-CONFIG-MAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-CONFIG-MAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Networking / H3C Comware-based switch or router

Monitoring Examples

An admin can compare hpnicfCfgRunModifiedLast against hpnicfCfgRunSavedLast to detect a device with unsaved changes that would be lost on reboot, then walk hpnicfCfgLogTable's hpnicfCfgLogTime and hpnicfCfgLogSrcCmd entries to identify exactly which CLI command triggered the most recent change; a rising hpnicfCfgLogDeletedEntries count indicates the log buffer is full and older change history is being purged.

What Can Be Monitored

last running-config modification time
last saved-config time
configuration change log (time, source command)
config log buffer overflow/deleted entries

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfCfgLogDeletedEntries OID:

Select an HP Networking/H3C switch and router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfCfgLogDeletedEntries into the Find box to locate it in the OID tree, then select it and click OK. The total number of rows deleted from hpnicfCfgLogTable. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
TIK hpnicfCfgExecuteEndTime	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.6	TimeTicks	read-only	Record the time of the execution is finished.
hpnicfCfgExecuteOperate	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6
I32 hpnicfCfgExecuteOperateResultEntryLimit	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.1	Integer32	read-write	The maximum number of ConfigOperationType entries that may be held in hpnicfCfgExecuteResultTable. A particular setting does not guarantee that much data can be held.
hpnicfCfgExecuteResultEntry	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1		not-accessible	The result entries of configuration execute operation.
I32 hpnicfCfgExecuteResultIndex	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.1	Integer32	not-accessible	The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached.
I32 hpnicfCfgExecuteResultOptIndex	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.2	Integer32	read-only	The configuration execute operation index in the hpnicfCfgExecuteResultTable.
CON hpnicfCfgExecuteResultOpType	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.3	ConfigOperationType	read-only	The operation type in the hpnicfCfgExecuteResultTable.
hpnicfCfgExecuteResultTable	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2		not-accessible	A table of configuration execute result.
CON hpnicfCfgExecuteState	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.4	ConfigOperationStateType	read-only	Record the status of the specified operation.
TIK hpnicfCfgExecuteTime	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.5	TimeTicks	read-only	Record the time of the execution starts.
TIK hpnicfCfgFirstTrapTime	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.8	TimeTicks	accessible-for-notify	Time when the first trap is sent.
NTF hpnicfCfgInvalidConfigFile	1.3.6.1.4.1.11.2.14.11.15.2.4.2.3			When the configuration file is invalid, this notification will be generated.
hpnicfCfgLog	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1
IP hpnicfCfgLogCmdSrcAddress	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.10	IpAddress	read-only	The address from which a request comes when the value of hpnicfCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hpnicfCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0. This object is replaced by hpnicfCfgLogCmdSrcAddrRev for it only support IPv4.
IP hpnicfCfgLogCmdSrcAddrRev	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.16	InetAddress	read-only	The address from which a request comes when the value of hpnicfCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hpnicfCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0.
IPt hpnicfCfgLogCmdSrcAddrType	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.15	InetAddressType	read-only	The type of IP address for the hpnicfCfgLogCmdSrcAddrRev.
STR hpnicfCfgLogCmdSrcAddrVPNName	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.17	DisplayString	read-only	The VPN instance of this operation uses.
C32 hpnicfCfgLogDeletedEntriesEx	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.5	Counter32	read-only	The total number of rows deleted from hpnicfCfgLogTable.
INT hpnicfCfgLogDesData	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.5	INTEGER	read-only	The destination for the configuration data event. unknown unknown runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line
hpnicfCfgLogEntry	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1		not-accessible	Information of the entry.
STR hpnicfCfgLogFile	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.14	DisplayString	read-only	The current configuration file name when hpnicfCfgLogSrcData has the value of 'netFtp',and hpnicfCfgLogDesData has the value of 'startupData'. Other, a zero length string.
I32 hpnicfCfgLogIndex	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.1	Integer32	not-accessible	Index of the table beginning from 1.
I32 hpnicfCfgLogLimitedEntries	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.4	Integer32	read-only	The object shows the maximum number of rows in hpnicfCfgLogTable. The value supported by the system is 10.
IP hpnicfCfgLogServerAddress	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.13	IpAddress	read-only	The remote server address when hpnicfCfgLogSrcData or hpnicfCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0. This object is replaced by hpnicfCfgLogServerAddrRev for it only support IPv4.
IP hpnicfCfgLogServerAddrRev	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.19	InetAddress	read-only	The remote server address when hpnicfCfgLogSrcData or hpnicfCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0.
IPt hpnicfCfgLogServerAddrType	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.18	InetAddressType	read-only	The type of IP address for the hpnicfCfgLogServerAddrRev.
STR hpnicfCfgLogServerAddrVPNName	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.20	DisplayString	read-only	The VPN instance of this operation uses.
INT hpnicfCfgLogSrcCmd	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.3	INTEGER	read-only	Specify the source command which brought the log. Currently we provide the types of source: 1.cmdLine(1):configure log instigated by command line. 2.snmp(2):configure log instigated by snmp. 3.other(3):configure log instigated by other source unknown.
INT hpnicfCfgLogSrcData	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.4	INTEGER	read-only	The source of the configuration data event. erase erasing destination runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line
hpnicfCfgLogTable	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7		not-accessible	Table for logging configuration operation in device.
STR hpnicfCfgLogTerminalLocation	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.9	DisplayString	read-only	The location of logging user which is available when hpnicfCfgLogSrcCmd is 'cmdLine'. Other, a zero length string.
I32 hpnicfCfgLogTerminalNum	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.8	Integer32	read-only	Specifies the terminal number. If hpnicfCfgLogSrcCmd is not 'cmdLine', use '-1'
INT hpnicfCfgLogTerminalType	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.6	INTEGER	read-only	Specifies the terminal type. If hpnicfCfgLogSrcCmd is not 'cmdLine', use 'notApplicable'. The value list: notApplicable(1): no meaning at this time. unknown(2): unknown terminal type. console(3): console interface. terminal(4): generic terminal. virtual(5): virtual terminal such as telnet. auxiliary(6): auxiliary interface.
STR hpnicfCfgLogTerminalUser	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.7	DisplayString	read-only	The name of logging user which is available when hpnicfCfgLogSrcCmd is 'cmdLine'. Other, a zero length string.
TIK hpnicfCfgLogTime	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.2	TimeTicks	read-only	Specify the sysUpTime when the config log was generated.
STR hpnicfCfgLogUserName	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.12	DisplayString	read-only	The user name used when hpnicfCfgLogSrcData or hpnicfCfgLogDesData has the value of 'netFtp'. Other, a zero length string.
STR hpnicfCfgLogVirHost	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.11	DisplayString	read-only	The host name of remote system connected if hpnicfCfgLogTerminalType has the value of 'virtual'. Other, a zero length string.
T/F hpnicfCfgLogWantBackup	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.6	TruthValue	read-write	Decide whether to backup the value of objects about hpnicfCfgLog.
NTF hpnicfCfgManEventlog	1.3.6.1.4.1.11.2.14.11.15.2.4.2.1			The object calculates the checksum on the current config per 10 minutes and even if it is different from the saved config but if a trap has been sent with the same checksum then don't send again until the checksum is different.
hpnicfCfgManLogGroup	1.3.6.1.4.1.11.2.14.11.15.2.4.3.2.1			A collection of objects configuration log group.
hpnicfCfgManNotificationGroup	1.3.6.1.4.1.11.2.14.11.15.2.4.3.2.3			Collection of notification objects.
hpnicfCfgOperate	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2
NTF hpnicfCfgOperateCompletion	1.3.6.1.4.1.11.2.14.11.15.2.4.2.2			When create hpnicfCfgOperateTable successfully, a notification may be generated.
T/F hpnicfCfgOperateEndNotificationSwitch	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.8	TruthValue	read-create	Specifies whether or not a notification should be issued on the completion of the operation.
TIK hpnicfCfgOperateEndTime	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.6	TimeTicks	read-only	The value of sysUpTime when the configuration operation is finished.
hpnicfCfgOperateEntry	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1		not-accessible	An operate request entry.
I32 hpnicfCfgOperateEntryAgeOutTime	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.2	Integer32	read-write	The number of minutes an unactive hpnicfCfgOperateEntry SHOULD be kept in the hpnicfCfgOperateTable before it is active. The object is a fator taken account of when it needs delete some rows make room in hpnicfCfgOperateTable.
STR hpnicfCfgOperateFileName	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.4	DisplayString	read-create	When the object of hpnicfCfgOperateType has the value of net2Startup, net2running or running2Net,the value must be specified. The file name may include the path if applicable. If the value of hpnicfCfgOperateType is net2Startup or net2running, this node specify the source file name of transfers.If the value of hpnicfCfgOperateType is running2Net , this node specify the destination file name of transfers. When hpnicfCfgOperateType has the value of startup2net,the object may not be created instead of using the file name of startup configuration file.
I32 hpnicfCfgOperateGlobalEntryLimit	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.1	Integer32	read-only	The maximum number of copy entries that may be held in hpnicfCfgOperateTable. A particular setting does not guarantee that much data can be held.
hpnicfCfgOperateGroup	1.3.6.1.4.1.11.2.14.11.15.2.4.3.2.2			A group of configuration operation.
I32 hpnicfCfgOperateIndex	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.1	Integer32	not-accessible	The unique index value of a row in this table.
INT hpnicfCfgOperateProtocol	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.3	INTEGER	read-create	If the value of hpnicfCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this node specify the protocol to be used for file transfer . The default protocol is ftp if no protocol is specified. And for other value of hpnicfCfgOperateType , this object may be ignored by the implementation. when clusterftp or clustertftp is selected, the hpnicfCfgOperateServerAddress needn't be set, the server address can be acquired automatically, the value of hpnicfCfgOperateServerAddress is uncertain during operation. both member switch and commander switch can use them if they support HGMP v2.
hpnicfCfgOperateResultEntry	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1		not-accessible	The result entries of configuration operation requests.
I32 hpnicfCfgOperateResultGlobalEntryLimit	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.3	Integer32	read-write	The maximum number of copy entries that may be held in hpnicfCfgOperateResultTable. A particular setting does not guarantee that much data can be held.
I32 hpnicfCfgOperateResultIndex	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.1	Integer32	not-accessible	The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached.
I32 hpnicfCfgOperateResultOptIndex	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.2	Integer32	read-only	The operation index in the hpnicfCfgOperateTable.
CON hpnicfCfgOperateResultOpType	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.3	ConfigOperationType	read-only	The operation type in the hpnicfCfgOperateTable.
hpnicfCfgOperateResultTable	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5		not-accessible	A table of config-operation requests result.
ROW hpnicfCfgOperateRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.9	RowStatus	read-create	The status of this table entry. When the status is active all the object's value in the entry is not allowed to modified.
IP hpnicfCfgOperateServerAddress	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.5	IpAddress	read-create	When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted. This object is replaced by hpnicfCfgOperateSrvAddrRev for it only support IPv4.
I32 hpnicfCfgOperateServerPort	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.10	Integer32	read-create	When the operation type is running2Net, net2Running, net2Startup or startup2Net, this node is used for specifying the remote port number. If the value is 0 or not specified, the known port number will be used.
IP hpnicfCfgOperateSrvAddrRev	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.12	InetAddress	read-create	When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified.
IPt hpnicfCfgOperateSrvAddrType	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.11	InetAddressType	read-create	The type of IP address for hpnicfCfgOperateSrvAddrRev.
STR hpnicfCfgOperateSrvVPNName	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.13	DisplayString	read-create	The VPN instance of this operation uses.
CON hpnicfCfgOperateState	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.4	ConfigOperationStateType	read-only	The operation state type in the hpnicfCfgOperateTable.
hpnicfCfgOperateTable	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4		not-accessible	A table of config-operation requests.
TIK hpnicfCfgOperateTime	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.5	TimeTicks	read-only	Record the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes.
CON hpnicfCfgOperateType	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.2	ConfigOperationType	read-create	Specify the type of operation on configuration.
STR hpnicfCfgOperateUserName	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.6	DisplayString	read-create	When the operation type is running2Net,net2Running,net2Startup or startup2net , the user name for the ftp server from/to which to download/upload should be specified. The object must be created if hpnicfCfgOperateProtocol has the value of ftp.
STR hpnicfCfgOperateUserPassword	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.7	DisplayString	read-create	When the operation type is running2Net,net2Running,net2Startup or startup2net , the user password for the ftp server from/to which to download/upload should be specified. The object must be created if hpnicfCfgOperateProtocol has the value of ftp.
STR hpnicfCfgOperFailReason	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.7	DisplayString	read-only	The failure reasons of configuration operation.
INT hpnicfCfgReset	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.7	INTEGER	read-write	Reboot the device with the default configuration.
INT hpnicfCfgReset2	1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.8	INTEGER	read-write	normal:do nothing. reset :reboot the device with the default configuration. 'normal' will be returned when getting. This node differs from hpnicfCfgReset in value.
TIK hpnicfCfgRunModifiedLast	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.1	TimeTicks	read-only	The object records the value of sysUpTime when the current configuration running in the system was last modified. The value will be changed immediately after system detects the current configuration has been changed.
TIK hpnicfCfgRunSavedLast	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.2	TimeTicks	read-only	The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than hpnicfCfgRunModifiedLast, the current configuration has been modified but not saved.
TIK hpnicfCfgStartModifiedLast	1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.3	TimeTicks	read-only	The object records the value of sysUpTime when the saved configuration used currently was last modified. It may have been modified by a save of the current configuration running in the system or other methods such as copy.
hpnicfConfig	1.3.6.1.4.1.11.2.14.11.15.2.4			This MIB contains objects for managing the system configuration. It contains the model used to represent configuration data that exists elsewhere in the system and in peripheral devices. There are no constraints on this MIB.
hpnicfConfigManCompliance	1.3.6.1.4.1.11.2.14.11.15.2.4.3.1.1			The statement of compliance for those implementing the configuration management MIB.
hpnicfConfigManCompliances	1.3.6.1.4.1.11.2.14.11.15.2.4.3.1
hpnicfConfigManConformance	1.3.6.1.4.1.11.2.14.11.15.2.4.3
hpnicfConfigManGroups	1.3.6.1.4.1.11.2.14.11.15.2.4.3.2
hpnicfConfigManNotifications	1.3.6.1.4.1.11.2.14.11.15.2.4.2
hpnicfConfigManObjects	1.3.6.1.4.1.11.2.14.11.15.2.4.1

RFC description

Manages system configuration on HP networks including configuration files, operations, and change history.

Start monitoring HP Networking/H3C switches and routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-CONFIG-MAN-MIB