All MIBs › HPN-ICF-CONFIG-MAN-MIB › hpnicfCfgOperateServerPort
hpnicfCfgOperateServerPort
Module: HPN-ICF-CONFIG-MAN-MIB
OID (symbolic): HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateServerPort
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: When the operation type is running2Net, net2Running, net2Startup or startup2Net, this node is used for specifying the remote port number. If the value is 0 or not specified, the known port number will be used.
What is hpnicfCfgOperateServerPort?
This field specifies the remote TCP/UDP port to use for a network configuration transfer; a value of 0 (or leaving it unset) makes the device use the protocol's well-known port. An admin would set this only when the FTP/TFTP server listens on a non-standard port.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.4 | hpnicfConfig | HPN-ICF-CONFIG-MAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.4.1 | hpnicfConfigManObjects | HPN-ICF-CONFIG-MAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.4.1.2 | hpnicfCfgOperate | HPN-ICF-CONFIG-MAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4 | hpnicfCfgOperateTable | HPN-ICF-CONFIG-MAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1 | hpnicfCfgOperateEntry | HPN-ICF-CONFIG-MAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.10 | hpnicfCfgOperateServerPort | HPN-ICF-CONFIG-MAN-MIB |