HP-ICF-SYSLOG-MIB

All MIBs › HP-ICF-SYSLOG-MIB

Organization: HP Networking

Last Updated: 2015-09-11

Category: Device Management, Domain: Network Management, Technology: Logging/Syslog, Vendor: HP/HPE

Description: HP ICF SNMP MIB for syslog server configuration and log event forwarding on HP ProCurve switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ICF-SYSLOG-MIB?

HP-ICF-SYSLOG-MIB is an HP proprietary MIB for configuring and monitoring the Syslog application on HP ProCurve switches, controlling which remote syslog servers receive log messages generated by the device. It exposes configuration objects for syslog server addresses/settings and status objects reflecting whether syslog forwarding is operating correctly. Its monitoring value lies in confirming the device's logging/software subsystem is healthy and actively forwarding event messages, which is important for ensuring visibility into other faults and status changes on the switch; it does not cover hardware health directly. It depends conceptually on the standard Syslog protocol (RFC 5424/3164) for message format, layered with HP's own configuration model. It is typically deployed across HP ProCurve switch estates as part of centralized logging infrastructure feeding a SIEM or syslog collector. Engineers can download the HP-ICF-SYSLOG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-SYSLOG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP ProCurve switch

Monitoring Examples

No sample_objects were given, but a plausible implementation includes a syslog server table listing configured destination IP addresses and enable status. An administrator would poll this table to confirm the switch is still configured to forward messages to the correct syslog collector, catching a misconfiguration if logs stop arriving centrally.

What Can Be Monitored

configured syslog server addresses
syslog forwarding enable/status

Imported Objects

From HP-ICF-OID

hpicfSyslog

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using hpicfSyslogOperationsMsgsTransmitted OID:

Select an HP ProCurve switch (syslog forwarding config) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpicfSyslogOperationsMsgsTransmitted into the Find box to locate it in the OID tree, then select it and click OK. The number of messages transmitted by the Syslog sender. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfSyslogMIB	1.3.6.1.4.1.11.2.14.14.1			The MIB module for configuring and monitoring Syslog applications. The HP Syslog application sends Syslog messages.
hpicfSyslogNotifications	1.3.6.1.4.1.11.2.14.14.1.0
NTF hpicfSyslogStatusChanged	1.3.6.1.4.1.11.2.14.14.1.0.1			This notification is sent when any of the objects listed are accessed. For example, when the first server address is entered, the application starts [hpicfSyslogOperationsStatus is ''started'' ]. When the last server address is removed, the Syslog application stops [hpicfSyslogOperationsStatus is ''stopped'']. The value of hpicfSyslogOperationsStatus will be the new status of the Syslog application after the change. Another example, when a server address is added, a notification is sent indicating the index used to store the row information, as well as the address type, the address itself, the description if given , and the row status.
hpicfSyslogObjects	1.3.6.1.4.1.11.2.14.14.1.1
hpicfSyslogControlTable	1.3.6.1.4.1.11.2.14.14.1.1.1		not-accessible	A table containing the configuration parameters pertaining to the hpicfSyslog applications serviced by an SNMP agent.
hpicfSyslogControlEntry	1.3.6.1.4.1.11.2.14.14.1.1.1.1		not-accessible	The configuration parameters pertaining to a Syslog application.
I32 hpicfSyslogControlIndex	1.3.6.1.4.1.11.2.14.14.1.1.1.1.1	Integer32	not-accessible	The Index that uniquely identifies the Syslog application in the hpicfSyslogControlTable. The value of the index for a Syslog application may not be the same across system reboots. Users and applications will need to determine the index of a Syslog application after system reboots. Initial implementation allows integers (1..6).
STR hpicfSyslogControlDescr	1.3.6.1.4.1.11.2.14.14.1.1.1.1.2	SnmpAdminString	read-create	A user definable description of the Syslog application. This description could be used by Syslog management applications e.g. in reports or in user interfaces. For the description to be persistent across reboots, the conceptual row must be in the 'active' state. Also, refer to note in hpicfSyslogControlRowStatus, for additional limitations.
IPt hpicfSyslogControlBindAddrType	1.3.6.1.4.1.11.2.14.14.1.1.1.1.3	InetAddressType	read-create	The type of Internet address which follows in hpicfSyslogControlBindAddr. Currently only IPv4 is supported.
IP hpicfSyslogControlBindAddr	1.3.6.1.4.1.11.2.14.14.1.1.1.1.4	InetAddress	read-create	The specific address the Syslog sender will bind to. The format of the address is specified by the corresponding hpicfSyslogControlBindAddrType object.
ROW hpicfSyslogControlRowStatus	1.3.6.1.4.1.11.2.14.14.1.1.1.1.5	RowStatus	read-create	This object is used to create, modify and delete rows in the hpicfSyslogControlTable. The value of hpicfSyslogControlDescr can be changed when this object is in state ''active'' or in ''notInService''. The other objects in a row can be modified only when the value of this object in the corresponding conceptual row is not ''active''. Thus to modify one or more of the objects in this conceptual row, a. change the row status to ''notInService'', b. change the values of the row c. change the row status to ''active'' The hpicfSyslogControlRowStatus may be changed to ''active'' if all the managed objects in the conceptual row with MAX-ACCESS read-create have been assigned valid values. The information in each conceptual row is only persist across reboots if the row status is 'active'.
T/F hpicfSyslogControlBindAddrIsOobm	1.3.6.1.4.1.11.2.14.14.1.1.1.1.6	TruthValue	read-create	This object indicates the specific address to which Syslog sender will bind is on OOBM interface. This mib object will be applicable only if there is a physical OOBM port on the device.
INT hpicfSyslogControlSmmLog	1.3.6.1.4.1.11.2.14.14.1.1.1.1.7	INTEGER	read-create	This object is applicable for a device with a standby management module like 8200zl. When the value of this object is set to enabled, all the log messages from the standby management module(SMM) will be sent to the Syslog server. If the value is disabled, the log messages from the standby management module will not be sent to the Syslog server. By default, this is disabled.
INT hpicfSyslogControlTransportProtocol	1.3.6.1.4.1.11.2.14.14.1.1.1.1.8	INTEGER	read-write	The transport protocol used for the connection to the Syslog server associated with this row. The default value is UDP.
INE hpicfSyslogControlDestinationPort	1.3.6.1.4.1.11.2.14.14.1.1.1.1.9	InetPortNumber	read-write	The socket port used by the transport protocol to connect to the Syslog server associated with this row. The default Syslog port for UDP is 514, for TCP is 1470, and for TLS is 6514.
hpicfSyslogOperations	1.3.6.1.4.1.11.2.14.14.1.1.2
C32 hpicfSyslogOperationsMsgsTransmittedEx	1.3.6.1.4.1.11.2.14.14.1.1.2.1	Counter32	read-only	The number of messages transmitted by the Syslog sender. This does not include the messages that could not be queued for transmission by the hpicfSyslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime.
C32 hpicfSyslogOperationsMsgsDropped	1.3.6.1.4.1.11.2.14.14.1.1.2.2	Counter32	read-only	The number of messages that could not be queued for transmission by the Syslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime.
TIM hpicfSyslogOperationsLastMsgTransmittedTime	1.3.6.1.4.1.11.2.14.14.1.1.2.3	TimeStamp	read-only	The value of sysUpTime when the last message was transmitted by the hpicfSyslog sender. If no messages have been transmitted by this Syslog application, since the last re-initialization of the local management subsystem, then this object will have a zero value.
TIM hpicfSyslogOperationsStartTime	1.3.6.1.4.1.11.2.14.14.1.1.2.4	TimeStamp	read-only	The value of sysUpTime when this Syslog application was started.
STR hpicfSyslogOperationsLastError	1.3.6.1.4.1.11.2.14.14.1.1.2.5	SnmpAdminString	read-only	A description of the last error related to sending a Syslog message that was encountered by this Syslog application. If no error has been encountered by this Syslog application then the value of this object will be a zero-length string. If no error has been encountered by this Syslog application since the last re-initialization of the local management subsystem then the value of this object will be a zero-length string.
TIM hpicfSyslogOperationsLastErrorTime	1.3.6.1.4.1.11.2.14.14.1.1.2.6	TimeStamp	read-only	The value of sysUpTime when the last error was encountered. If no error has been encountered by this Syslog application since the last re-initialization of the local management subsystem, then this object will have a zero value.
TIM hpicfSyslogOperationsCounterDiscontinuityTime	1.3.6.1.4.1.11.2.14.14.1.1.2.7	TimeStamp	read-only	The value of sysUpTime on the most recent occasion at which any one or more of this Syslog application's counters, viz., counters with OID prefix 'hpicfSyslogOperationsMsgsTransmitted' or 'hpicfSyslogOperationsMsgsDropped' suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object will have a zero value.
INT hpicfSyslogOperationsStatus	1.3.6.1.4.1.11.2.14.14.1.1.2.8	INTEGER	read-only	The status of the Syslog application.
hpicfSyslogPriority	1.3.6.1.4.1.11.2.14.14.1.1.3
HPI hpicfSyslogPriorityFacility	1.3.6.1.4.1.11.2.14.14.1.1.3.1	HpicfSyslogFacility	read-write	The facility value of this entry. This value will be returned in all Syslog message, regardless of the process/daemon that originates the message.
HPI hpicfSyslogPrioritySeverity	1.3.6.1.4.1.11.2.14.14.1.1.3.2	HpicfSyslogSeverity	read-write	The severity value of this entry. Used to filter 'event' messages.
STR hpicfSyslogPriorityDescr	1.3.6.1.4.1.11.2.14.14.1.1.3.3	SnmpAdminString	read-write	A textual description of this priority entry.
HPI hpicfSyslogSystemModule	1.3.6.1.4.1.11.2.14.14.1.1.3.4	HpicfSyslogSystemModule	read-write	A system module value of this entry. Used to filter 'event' messages.
HPI hpicfSyslogOriginId	1.3.6.1.4.1.11.2.14.14.1.1.3.5	HpicfSyslogOriginId	read-write	Specifies the content of a HOSTNAME field in the HEADER of a syslog message. This content can be either an IP address, a hostname or none. A value of (1) indicates the IP address of the outgoing interface. A value of (2) indicates the hostname of the device. A value of (3) indicates NILVALUE. Here, NILVALUE is defined as '-'.
hpicfSyslogStatistics	1.3.6.1.4.1.11.2.14.14.1.1.4
hpicfSyslogGeneralStatistics	1.3.6.1.4.1.11.2.14.14.1.1.4.1
C32 hpicfSyslogGeneralLogSent	1.3.6.1.4.1.11.2.14.14.1.1.4.1.1	Counter32	read-only	Number of Syslog messages sent by the Syslog sender.
C32 hpicfSyslogGeneralLogRecv	1.3.6.1.4.1.11.2.14.14.1.1.4.1.2	Counter32	read-only	Number of Syslog messages received by the Syslog Server.
C32 hpicfSyslogGeneralLogRelay	1.3.6.1.4.1.11.2.14.14.1.1.4.1.3	Counter32	read-only	The number of messages processed by the Syslog relay.
C32 hpicfSyslogGeneralSendError	1.3.6.1.4.1.11.2.14.14.1.1.4.1.4	Counter32	read-only	Number of Syslog messages that failed during the send process and this failed message will be buffered for the retransmission process.
C32 hpicfSyslogGeneralLogResend	1.3.6.1.4.1.11.2.14.14.1.1.4.1.5	Counter32	read-only	Number of Syslog messages re-transmitted successfully.
C32 hpicfSyslogGeneralResendError	1.3.6.1.4.1.11.2.14.14.1.1.4.1.6	Counter32	read-only	Number of Syslog messages that failed during the retransmission process.The Syslog retransmission will happen if and only if Syslog send failed while transmitting the buffered Syslog messages.
C32 hpicfSyslogGeneralLogBuffered	1.3.6.1.4.1.11.2.14.14.1.1.4.1.7	Counter32	read-only	Current number of buffered Syslog messages that are ready to be transmitted.
hpicfSyslogSeverityStatistics	1.3.6.1.4.1.11.2.14.14.1.1.4.2
hpicfSyslogSeverityCounterInfoTable	1.3.6.1.4.1.11.2.14.14.1.1.4.2.1		not-accessible	A table containing the Syslog severity statistics counter value.
hpicfSyslogSeverityCounterInfoEntry	1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1		not-accessible	The configuration parameters pertaining to a Syslog severity statistics.
I32 hpicfSyslogSeverityTypeIndex	1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.1	Integer32	not-accessible	The Index that uniquely identifies the Syslog severity type.
HPI hpicfSyslogSeverityType	1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.2	HpicfSyslogSeverity	read-only	The severity type for all the Syslog messages.
C32 hpicfSyslogSeverityCounter	1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.3	Counter32	read-only	Number of messages transmitted per severity.
hpicfSyslogFacilityStatistics	1.3.6.1.4.1.11.2.14.14.1.1.4.3
hpicfSyslogFacilityCounterInfoTable	1.3.6.1.4.1.11.2.14.14.1.1.4.3.1		not-accessible	A table containing the Syslog facility statistics counter values.
hpicfSyslogFacilityCounterInfoEntry	1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1		not-accessible	The configuration parameters pertaining to a Syslog facility statistics.
I32 hpicfSyslogfacilityCounterIndex	1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.1	Integer32	not-accessible	The Index that uniquely identifies the Syslog facility.
HPI hpicfSyslogfacilityType	1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.2	HpicfSyslogFacility	read-only	The facility type for all the Syslog messages.
C32 hpicfSyslogfacilityCounter	1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.3	Counter32	read-only	Number of Syslog messages transmitted per facilty.
hpicfSyslogLogMsgOptions	1.3.6.1.4.1.11.2.14.14.1.1.5
T/F hpicfSyslogClearLog	1.3.6.1.4.1.11.2.14.14.1.1.5.1	TruthValue	read-write	Setting this object to TRUE will erase all event log messages. This object always return FALSE when read.
T/F hpicfSyslogSecClearLog	1.3.6.1.4.1.11.2.14.14.1.1.5.2	TruthValue	read-write	Setting this object to TRUE will erase all security-related log messages. This object always return FALSE when read.
hpicfSyslogServerStatisticsTable	1.3.6.1.4.1.11.2.14.14.1.1.6		not-accessible	A table containing the statistical information pertaining to each Syslog server indexed by hpicfSyslogControlIndex.
hpicfSyslogServerStatisticsEntry	1.3.6.1.4.1.11.2.14.14.1.1.6.1		not-accessible	The configuration parameters pertaining to a Syslog application.
C32 hpicfSyslogServerLogSent	1.3.6.1.4.1.11.2.14.14.1.1.6.1.1	Counter32	read-only	Number of Syslog messages sent by the Syslog sender.
C32 hpicfSyslogServerLogRecv	1.3.6.1.4.1.11.2.14.14.1.1.6.1.2	Counter32	read-only	Number of Syslog messages received by the Syslog Server.
C32 hpicfSyslogServerLogRelay	1.3.6.1.4.1.11.2.14.14.1.1.6.1.3	Counter32	read-only	The number of messages processed by the Syslog relay.
C32 hpicfSyslogServerSendError	1.3.6.1.4.1.11.2.14.14.1.1.6.1.4	Counter32	read-only	Number of Syslog messages that failed during the send process and this failed message will be buffered for the retransmission process.
C32 hpicfSyslogServerLogResend	1.3.6.1.4.1.11.2.14.14.1.1.6.1.5	Counter32	read-only	Number of Syslog messages re-transmitted successfully.
C32 hpicfSyslogServerResendError	1.3.6.1.4.1.11.2.14.14.1.1.6.1.6	Counter32	read-only	Number of Syslog messages that failed during the retransmission process.The Syslog retransmission will happen if and only if Syslog send failed while transmitting the buffered Syslog messages.
C32 hpicfSyslogServerLogBuffered	1.3.6.1.4.1.11.2.14.14.1.1.6.1.7	Counter32	read-only	Current number of buffered Syslog messages that are ready to be transmitted.
hpicfSyslogAlerts	1.3.6.1.4.1.11.2.14.14.1.1.7
hpicfSyslogAlertsTable	1.3.6.1.4.1.11.2.14.14.1.1.7.1		not-accessible	A table of entries containing configuration information for transmitting alerts in Syslog messages.
hpicfSyslogAlertsEntry	1.3.6.1.4.1.11.2.14.14.1.1.7.1.1		not-accessible	An entry in the 'hpicfSyslogAlertsTable'.
INT hpicfSyslogAlertIndex	1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.1	INTEGER	not-accessible	The index which uniquely identifies a row in the 'hpicfSyslogAlertsTable'. runningCfgChg - the alert type indicating that a change was made made to the switch's running configuration.
INT hpicfSyslogAlertAdminStatus	1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.2	INTEGER	read-write	Indicates whether the Syslog application is permitted to generate given type of alerts in transmitted Syslog messages. Default is disabled.
U32 hpicfSyslogAlertTransmitInterval	1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.3	Unsigned32	read-write	Specifies the transmission interval in seconds for sending alerts in Syslog messages. Only one Syslog message is allowed for transmission within this time interval. Default value is 0, indicating there is no rate limit for alerts transmission.
hpicfSyslogConformance	1.3.6.1.4.1.11.2.14.14.1.3
hpicfSyslogGroups	1.3.6.1.4.1.11.2.14.14.1.3.1
hpicfSyslogOperationsGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.1			A collection of objects providing message related statistics.
hpicfSyslogControlGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.2			A collection of objects representing the run time parameters for the Syslog applications.
hpicfSyslogPriorityGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.3			A collection of objects representing the priority groupings of hpicfSyslog messages.
hpicfSyslogNotificationGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.5			A collection of notifications about the operational state of a Syslog application.
hpicfSyslogControlGroupOobm	1.3.6.1.4.1.11.2.14.14.1.3.1.6			A collection of objects representing the run time parameters for the OOBM aware Syslog applications.
hpicfSyslogGeneralStatisticsGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.7			A collection of objects representing the general statistics counter information.
hpicfSyslogSeverityStatisticsGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.8			A collection of objects representing the severity statistics counter information.
hpicfSyslogFacilityStatisticsGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.9			A collection of objects representing the facility statistics counter information.
hpicfSyslogControlGroupSmm	1.3.6.1.4.1.11.2.14.14.1.3.1.10			A collection of objects representing the log message for the standby module.
hpicfSyslogLogMsgOptionsGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.11			A collection of objects representing the log message information.
hpicfSyslogControlTransportGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.12			A collection of objects representing the run time parameters for the transport applications.
hpicfSyslogServerStatisticsGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.13			A collection of objects representing the server specific statistics counter information.
hpicfSyslogPriorityGroup1	1.3.6.1.4.1.11.2.14.14.1.3.1.14			A collection of object for Syslog priority.
hpicfSyslogAlertsGroup	1.3.6.1.4.1.11.2.14.14.1.3.1.15			A collection of objects representing Syslog alerts information.
hpicfSyslogOriginIdGroup1	1.3.6.1.4.1.11.2.14.14.1.3.1.16			An object for syslog origin ID.
hpicfSyslogLogMsgOptionsGroup1	1.3.6.1.4.1.11.2.14.14.1.3.1.17			A collection of objects representing the log message information.
hpicfSyslogCompliances	1.3.6.1.4.1.11.2.14.14.1.3.2
hpicfSyslogFullCompliance1	1.3.6.1.4.1.11.2.14.14.1.3.2.1			The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the Syslog application.
hpicfSyslogFullCompliance2	1.3.6.1.4.1.11.2.14.14.1.3.2.2			The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP.
hpicfSyslogReadOnlyCompliance1	1.3.6.1.4.1.11.2.14.14.1.3.2.4			The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). It can also send notifications about change in the operational status of the Syslog application.
hpicfSyslogReadOnlyCompliance2	1.3.6.1.4.1.11.2.14.14.1.3.2.5			The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode).
hpicfSyslogNotificationCompliance	1.3.6.1.4.1.11.2.14.14.1.3.2.7			The compliance statement for SNMP entities which implement the SYSLOG-MIB and support only notifications about change in the operational status of a Syslog application.
hpicfSyslogFullComplianceOobm	1.3.6.1.4.1.11.2.14.14.1.3.2.8			The compliance statement for Syslog server configuration with support for OOBM.
hpicfSyslogStatisticsCompliance	1.3.6.1.4.1.11.2.14.14.1.3.2.9			The compliance statement for SNMP entities which implement the Syslog statistics.
hpicfSyslogSmmLogMsgCompliance	1.3.6.1.4.1.11.2.14.14.1.3.2.10			The compliance statement for Syslog log messages for standby module.
hpicfSyslogTransportCompliance	1.3.6.1.4.1.11.2.14.14.1.3.2.11			The compliance statement for Syslog transport .
hpicfSyslogPriorityCompliance	1.3.6.1.4.1.11.2.14.14.1.3.2.12			The compliance statement for Syslog priority .
hpicfSyslogServerStatisticsCompliance	1.3.6.1.4.1.11.2.14.14.1.3.2.13			The compliance statement for syslog server statistics .
hpicfSyslogAlertsCompliance	1.3.6.1.4.1.11.2.14.14.1.3.2.14			The compliance statement for Syslog alerts.
hpicfSyslogOriginIdCompliance	1.3.6.1.4.1.11.2.14.14.1.3.2.15			The compliance statement for syslog origin id.
hpicfSyslogSmmLogMsgCompliance1	1.3.6.1.4.1.11.2.14.14.1.3.2.16			The compliance statement for Syslog log messages for standby module.

RFC description

MIB module for configuring and monitoring syslog applications and message delivery on HP networking devices.

Start monitoring HP ProCurve switch (syslog forwarding config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-SYSLOG-MIB