HP-ICF-DOWNLOAD

All MIBs › HP-ICF-DOWNLOAD

Organization: HP Networking

Last Updated: 2015-10-14

Category: Device Management, Vendor: HP/HPE

Description:

HP ICF SNMP MIB for firmware and software image download management via TFTP or other protocols on HP ProCurve devices.

Imported Objects

PhysicalIndex

From HP-ICF-OID

hpicfCommon	OBJECT-IDENTITY
hpicfObjectModules	OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TAddress
TDomain
TruthValue

What Is HP-ICF-DOWNLOAD?

HP-ICF-DOWNLOAD is HP's Integrated Communication Facility (ICF) MIB for managing firmware/software image downloads via TFTP or other protocols on HP ProCurve network devices, within the software-lifecycle-management area. It exposes configuration and operational data for initiating and tracking a download operation, such as the source server, file identification, transfer protocol, and the resulting status of the download attempt. This MIB is directly useful for software status monitoring: it lets an administrator confirm a firmware upgrade job has been triggered correctly and track whether the download completed successfully or failed, which is essential for verifying a device is running the intended software version after a maintenance operation. It is part of the broader HP ICF MIB family (alongside modules like HP-ICF-CHASSIS and HP-ICF-BOARD) and builds on standard SNMP/TFTP conventions for the actual transfer mechanism. Typical deployment is HP ProCurve switches undergoing remote firmware upgrades initiated and tracked by an NMS or upgrade script. Network engineers evaluating or troubleshooting this functionality can download the HP-ICF-DOWNLOAD file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-DOWNLOAD. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

firmware/software download status (in-progress/success/failure)
download server address and file identification
transfer protocol configuration
download operation trigger state

Supported Devices

HP ProCurve switches
HP ICF-based network devices

Monitoring Examples

No specific object or table names were included in the available source excerpt, so exact objects cannot be confirmed; based on the module description, this MIB models the download server address/filename, the transfer protocol selection, a trigger to start the download, and a resulting status object indicating in-progress, success, or failure. An administrator pushing a firmware update to a fleet of ProCurve switches would poll the download status object after triggering the transfer to confirm each unit completed the download successfully before proceeding to reboot into the new image.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT hpicfDlLogErrorStatus	1.3.6.1.4.1.11.2.14.11.1.3.4.1.8	INTEGER	read-only	The result of the attempt to download firmware to this device. The values are the same as the corresponding values of hpicfDownloadErrorStatus.
STR hpicfDlLogErrorText	1.3.6.1.4.1.11.2.14.11.1.3.4.1.9	DisplayString	read-only	A textual description of the final error status of the attempt to download firmware to this device.
STR hpicfDlLogFilename	1.3.6.1.4.1.11.2.14.11.1.3.4.1.6	DisplayString	read-only	The filename from which this device attempted to download firmware.
I32 hpicfDlLogIndex	1.3.6.1.4.1.11.2.14.11.1.3.4.1.1	Integer32	read-only	The index of this entry in the download log table. Index 1 will always contain the oldest entry. If the table is full when a download attempt is made, the new entry becomes the last entry (hpicfDownloadLogMaxSize), and all earlier entries are shifted down by one entry, removing the old index 1.
ADR hpicfDlLogOwnerAddress	1.3.6.1.4.1.11.2.14.11.1.3.4.1.2	TAddress	read-only	The transport address of the management station that attempted to initiate a download of this device, formatted according to the value of hpicfDlLastOwnerDomain.
TDO hpicfDlLogOwnerDomain	1.3.6.1.4.1.11.2.14.11.1.3.4.1.3	TDomain	read-only	The kind of transport service used by the management station that attempted to initiate a download of this device.
INT hpicfDlLogResetType	1.3.6.1.4.1.11.2.14.11.1.3.4.1.7	INTEGER	read-only	The type of reset requested to be performed after completion of the firmware download attempt.
ADR hpicfDlLogTAddress	1.3.6.1.4.1.11.2.14.11.1.3.4.1.4	TAddress	read-only	The transport address of the node from which this device attempted to download firmware, formatted according to the value of hpicfDlLastTDomain.
TDO hpicfDlLogTDomain	1.3.6.1.4.1.11.2.14.11.1.3.4.1.5	TDomain	read-only	The kind of transport service which was used for the attempt to download firmware to this device.
hpicfDownload	1.3.6.1.4.1.11.2.14.11.1.3
IP hpicfDownloadAutoTftpAddress	1.3.6.1.4.1.11.2.14.11.1.3.11.1.3	InetAddress	read-write	The tftp server address to download firmware from, formatted according to the value of the associated instance of hpicfDownloadAutoTftpAddressType.
IPt hpicfDownloadAutoTftpAddressType	1.3.6.1.4.1.11.2.14.11.1.3.11.1.2	InetAddressType	read-write	The type of address in the corresponding hpicfDownloadAutoTftpAddress object.
INT hpicfDownloadAutoTftpAdminStatus	1.3.6.1.4.1.11.2.14.11.1.3.11.1.5	INTEGER	read-write	This object enables/disables auto-tftp. The value of hpicfDownloadAutoTftpAddress, hpicfDownloadAutoTftpRemoteFilename can not be empty when hpicfDownloadAutoTftpAdminStatus is enabled.
hpicfDownloadAutoTftpCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.4			The compliance statement for HP ICF network downloadable devices that allows automatic download of a firmware-image on boot.
hpicfDownloadAutoTftpEntry	1.3.6.1.4.1.11.2.14.11.1.3.11.1		not-accessible	The row in the hpicfDownloadAutoTftpTable containing the auto-tftp download parameters.
hpicfDownloadAutoTftpGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.5			A collection of objects for controlling automatic download of a firmware image to the device.
I32 hpicfDownloadAutoTftpIndex	1.3.6.1.4.1.11.2.14.11.1.3.11.1.1	Integer32	not-accessible	The index which uniquely identifies this row.
STR hpicfDownloadAutoTftpRemoteFilename	1.3.6.1.4.1.11.2.14.11.1.3.11.1.4	DisplayString	read-write	The firmware image name to download from tftp-server. It can be upto 255 characters.
hpicfDownloadAutoTftpTable	1.3.6.1.4.1.11.2.14.11.1.3.11		not-accessible	A table for automatic firmware download to the device via TFTP during boot. The firmware image will be downloaded if it has a different version from the firmware running on the switch. There will be only one row at any time for this table, and the only valid index for this table is 1.
hpicfDownloadCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.1			******* THIS COMPLIANCE IS DEPRECATED ******* The compliance statement for HP ICF network downloadable devices.
hpicfDownloadCompliances	1.3.6.1.4.1.11.2.14.10.2.4.1.1
hpicfDownloadConfigCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.2			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
T/F hpicfDownloadConfigFileUpdateEnabled	1.3.6.1.4.1.11.2.14.11.1.3.10	TruthValue	read-write	This object facilitates enabling/disabling configuration file update through DHCP. By default, this is enabled.
hpicfDownloadConfigGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.3			A collection of objects for controlling and monitoring network download of device firmware to ICF devices.
hpicfDownloadConfigInetCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.3			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance1	1.3.6.1.4.1.11.2.14.10.2.4.1.1.5			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance2	1.3.6.1.4.1.11.2.14.10.2.4.1.1.6			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance3	1.3.6.1.4.1.11.2.14.10.2.4.1.1.7			A New version of the compliance statement for HP ICF network downloadable devices that allows monitoring of downloads in progress and directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance4	1.3.6.1.4.1.11.2.14.10.2.4.1.1.8			A New version of the compliance statement for HP ICF network downloadable devices that allows monitoring of downloads in progress and directing a download to different destinations on the device.
hpicfDownloadConfigInetGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.4			A collection of objects for controlling and monitoring network download of device firmware to ICF devices.
hpicfDownloadConfigOtherGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.6			A collection of objects for controlling automatic download of a firmware image to the device.
hpicfDownloadConfigOtherGroup1	1.3.6.1.4.1.11.2.14.10.2.4.1.2.7			A collection of objects for controlling automatic download of a firmware image to the device.
hpicfDownloadConfigOtherGroup2	1.3.6.1.4.1.11.2.14.10.2.4.1.2.8			A collection of objects for controlling the automatic download of a firmware on the device.
hpicfDownloadConfigOtherGroup3	1.3.6.1.4.1.11.2.14.10.2.4.1.2.9			A collection of objects for controlling the automatic download of a firmware on the device.
hpicfDownloadConformance	1.3.6.1.4.1.11.2.14.10.2.4.1
STR hpicfDownloadDestination	1.3.6.1.4.1.11.2.14.11.1.3.1.1.13	DisplayString	read-create	The destination of the download file on the agent. The allowable destination names depend on the type of agent being downloaded. In all cases, a destination of '/os/primary' or '/os/secondary' indicates that this is a download of the agent's firmware image. The agent will use '/os/primary' as the default value for this object when the row is created. ICF router agents also allow a download of a config file. Currently, the name of the config file on the agent is '/config'. An agent should reject an attempt to set this object to a destination name that does not make sense for this type of agent.
hpicfDownloadEntry	1.3.6.1.4.1.11.2.14.11.1.3.1.1		not-accessible	The row in the hpicfDownloadTable containing the download parameters. Since this table does not support IPv6, it is deprecated in favor of hpicfDownloadInetEntry.
INT hpicfDownloadErrorStatus	1.3.6.1.4.1.11.2.14.11.1.3.1.1.8	INTEGER	read-only	Status of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object: corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at hpicfDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts. hardwareError - there was a hardware problem on the agent that forced an abort of the download (see hpicfDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the hpicfDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of hpicfDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. Currently only used on JetDirect agents. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. Currently only used on JetDirect agents. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. Currently only used on JetDirect agents. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.
STR hpicfDownloadErrorText	1.3.6.1.4.1.11.2.14.11.1.3.1.1.9	DisplayString	read-only	A textual description of the current error status of the firmware download.
STR hpicfDownloadFilename	1.3.6.1.4.1.11.2.14.11.1.3.1.1.6	DisplayString	read-create	Filename and path of file to download (maximum length of 63 characters + NULL). An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
hpicfDownloadGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.1			******* THIS GROUP IS DEPRECATED ******* A collection of objects for controlling network download of device firmware to ICF devices.
hpicfDownloadGroups	1.3.6.1.4.1.11.2.14.10.2.4.1.2
INT hpicfDownloadIndex	1.3.6.1.4.1.11.2.14.11.1.3.1.1.1	INTEGER	read-only	The index which uniquely identifies this row. The only legal value for this object is 1.
PHY hpicfDownloadInetCoreDumpModule	1.3.6.1.4.1.11.2.14.11.1.3.9.1.20	PhysicalIndex	read-create	This object can be updated if the hpicfDownloadInetFileType is set to coreDump. Valid entPhysicalIndex for this object are management-modules and interface-modules.
STR hpicfDownloadInetDestination	1.3.6.1.4.1.11.2.14.11.1.3.9.1.16	DisplayString	read-create	The destination of the download file on the agent. The allowable destination names depend on the type of agent being downloaded. In case of firmware download,destination can be '/os/primary' or '/os/secondary' The agent will use '/os/primary' as the default value for this object when the row is created. In case of downloading a config file, this object is set to the name of the config file on the switch to where it should be downloaded. In case of downloading the startup config, this object is nullified as it is not used. ICF router agents also allow a download of a config file. Currently, the name of the config file on the agent is '/config'. If the hpicfDownloadInetOpType is set to ftget, an agent should reject an attempt to set this object to a destination name that does not make sense for this type of agent. If hpicfDownloadInetOpType is ftput this can be set to a filename present in the tftp server.
I32 hpicfDownloadInetDestinationPort	1.3.6.1.4.1.11.2.14.11.1.3.9.1.8	Integer32	read-write	The port of the management station that initiated this download attempt.
hpicfDownloadInetEntry	1.3.6.1.4.1.11.2.14.11.1.3.9.1		not-accessible	The row in the hpicfDownloadInetTable containing the download parameters.
INT hpicfDownloadInetErrorStatus	1.3.6.1.4.1.11.2.14.11.1.3.9.1.11	INTEGER	read-only	Status of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object: corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at hpicfDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts. hardwareError - there was a hardware problem on the agent that forced an abort of the download (see hpicfDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the hpicfDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of hpicfDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. Currently only used on JetDirect agents. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. Currently only used on JetDirect agents. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. Currently only used on JetDirect agents. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.
STR hpicfDownloadInetErrorText	1.3.6.1.4.1.11.2.14.11.1.3.9.1.12	DisplayString	read-only	A textual description of the current error status of the firmware download.
INT hpicfDownloadInetFileModeType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.19	INTEGER	read-create	The FileModeType used by the management station to initiate the download attempt.
STR hpicfDownloadInetFilename	1.3.6.1.4.1.11.2.14.11.1.3.9.1.4	DisplayString	read-create	Filename and path of file to download (maximum length of 63 characters + NULL). An attempt to modify this value will fail if the associated hpicfDownloadInetStatus object would be equal to 'active' both before and after the modification attempt.
INT hpicfDownloadInetFileTransferType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.9	INTEGER	read-write	The FileTransfer Method used by the management station to initiate the download attempt.
INT hpicfDownloadInetFileType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.18	INTEGER	read-create	The FileType used by the management station to initiate the upload/download attempt. OpType-ftput is not supported for flash. OpType-ftget is not supported for runningConfig and coreDump
I32 hpicfDownloadInetIndex	1.3.6.1.4.1.11.2.14.11.1.3.9.1.1	Integer32	read-only	The index which uniquely identifies this row.
I32 hpicfDownloadInetOctetCount	1.3.6.1.4.1.11.2.14.11.1.3.9.1.15	Integer32	read-only	The number of octets that have been transferred during the current pass. This object is initialized to zero by the agent when the corresponding instance of hpicfDownloadStatus is set to 'active', and reinitialized to zero at the beginning of each pass.
INT hpicfDownloadInetOpType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.17	INTEGER	read-write	The OpType which is used for Getting or Putting firmware, coreDump and config from/to the TFTP server.
IP hpicfDownloadInetOwnerAddress	1.3.6.1.4.1.11.2.14.11.1.3.9.1.6	InetAddress	read-only	The transport address of the management station that initiated this download attempt, formatted according to the value of the associated instance of hpicfDownloadInetOwnerAddressType.
IPt hpicfDownloadInetOwnerAddressType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.5	InetAddressType	read-write	The type of address in the corresponding hpicfDownloadInetOwnerAddress object.
I32 hpicfDownloadInetPassesLeft	1.3.6.1.4.1.11.2.14.11.1.3.9.1.14	Integer32	read-only	The number of passes remaining in the current download attempt. Some agents (currently JetDirect agents) require multiple passes through the download file in order to download a firmware image. This object indicates the number of passes remaining, including the current pass. The object is initialized by the agent to the number of passes required to complete the download when the corresponding instance of hpicfDownloadStatus is set to 'active'. It is decremented by one each time a pass completes.
INT hpicfDownloadInetResetType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.10	INTEGER	read-create	The type of reset to perform after completion of the firmware download. Note that not all agents will support all possible values, and there may be other agent-specific values for this object.
I32 hpicfDownloadInetSourcePort	1.3.6.1.4.1.11.2.14.11.1.3.9.1.7	Integer32	read-write	The port of the management station that initiated this download attempt.
ROW hpicfDownloadInetStatus	1.3.6.1.4.1.11.2.14.11.1.3.9.1.13	RowStatus	read-create	The status of this download entry. This object may not be set to 'active' unless the following columnar objects exist in this row: hpicfDownloadInetTAddress, hpicfDownloadInetTAddressType, hpicfDownloadInetFilename, and hpicfDownloadInetResetType.
hpicfDownloadInetTable	1.3.6.1.4.1.11.2.14.11.1.3.9		not-accessible	A table of firmware downloads to this device. There will at any time be either 0 or 1 rows in this table, and the only valid index for this table is 1. It is only a table so that we may take advantage of the RowStatus textual convention for configuring the download parameters.
IP hpicfDownloadInetTAddress	1.3.6.1.4.1.11.2.14.11.1.3.9.1.3	InetAddress	read-create	The transport address of the node to download firmware from, formatted according to the value of the associated instance of hpicfDownloadInetTAddressType. An attempt to modify this value will fail if the associated hpicfDownloadInetStatus object would be equal to 'active' both before and after the modification attempt.
IPt hpicfDownloadInetTAddressType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.2	InetAddressType	read-write	The type of address in the corresponding hpicfDownloadTAddress object. An attempt to modify this value will fail if the associated hpicfDownloadInetStatus object would be equal to 'active' both before and after the modification attempt.
hpicfDownloadLogEntry	1.3.6.1.4.1.11.2.14.11.1.3.4.1		not-accessible	An entry in the hpicfDownloadLogTable containing information about a single download attempt.
hpicfDownloadLogGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.2			A collection of objects for maintaining a log of network download attempts to ICF devices.
I32 hpicfDownloadLogMaxSize	1.3.6.1.4.1.11.2.14.11.1.3.2	Integer32	read-only	The maximum number of the download log entries supported by this agent. Note that 0 is a legal value for this variable.
G32 hpicfDownloadLogSize	1.3.6.1.4.1.11.2.14.11.1.3.3	Gauge32	read-only	The number of download log entries currently in the hpicfDownloadLogTable.
hpicfDownloadLogTable	1.3.6.1.4.1.11.2.14.11.1.3.4		not-accessible	A log of the hpicfDownloadSize most recent download attempts to this device. The first entry in the table is the oldest.
hpicfDownloadMib	1.3.6.1.4.1.11.2.14.10.2.4			This MIB module manages the network download capabilities for devices in the HP Integrated Communication Facility product line.
I32 hpicfDownloadOctetCount	1.3.6.1.4.1.11.2.14.11.1.3.1.1.12	Integer32	read-only	The number of octets that have been transferred during the current pass. This object is initialized to zero by the agent when the corresponding instance of hpicfDownloadStatus is set to 'active', and reinitialized to zero at the beginning of each pass.
ADR hpicfDownloadOwnerAddress	1.3.6.1.4.1.11.2.14.11.1.3.1.1.2	TAddress	read-only	The transport address of the management station that initiated this download attempt, formatted according to the value of the associated instance of hpicfDownloadOwnerDomain.
TDO hpicfDownloadOwnerDomain	1.3.6.1.4.1.11.2.14.11.1.3.1.1.3	TDomain	read-only	The kind of transport service used by the management station that initiated this download attempt.
I32 hpicfDownloadPassesLeft	1.3.6.1.4.1.11.2.14.11.1.3.1.1.11	Integer32	read-only	The number of passes remaining in the current download attempt. Some agents (currently JetDirect agents) require multiple passes through the download file in order to download a firmware image. This object indicates the number of passes remaining, including the current pass. The object is initialized by the agent to the number of passes required to complete the download when the corresponding instance of hpicfDownloadStatus is set to 'active'. It is decremented by one each time a pass completes.
INT hpicfDownloadResetType	1.3.6.1.4.1.11.2.14.11.1.3.1.1.7	INTEGER	read-create	The type of reset to perform after completion of the firmware download. Note that not all agents will support all possible values, and there may be other agent-specific values for this object.
ROW hpicfDownloadStatus	1.3.6.1.4.1.11.2.14.11.1.3.1.1.10	RowStatus	read-create	The status of this download entry. This object may not be set to 'active' unless the following columnar objects exist in this row: hpicfDownloadTAddress, hpicfDownloadTDomain, hpicfDownloadFilename, and hpicfDownloadResetType.
hpicfDownloadTable	1.3.6.1.4.1.11.2.14.11.1.3.1		not-accessible	A table of firmware downloads to this device. There will at any time be either 0 or 1 rows in this table, and the only valid index for this table is 1. It is only a table so that we may take advantage of the RowStatus textual convention for configuring the download parameters. Since this table does not support IPv6, it is deprecated in favor of hpicfDownloadInetTable.
ADR hpicfDownloadTAddress	1.3.6.1.4.1.11.2.14.11.1.3.1.1.4	TAddress	read-create	The transport address of the node to download firmware from, formatted according to the value of the associated instance of hpicfDownloadTDomain. An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
TDO hpicfDownloadTDomain	1.3.6.1.4.1.11.2.14.11.1.3.1.1.5	TDomain	read-create	The kind of transport service to be used for the download. Currently supports snmpUDPDomain and snmpIPXDomain. An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
INT hpicfDownloadTftp6Config	1.3.6.1.4.1.11.2.14.11.1.3.7	INTEGER	read-write	******* THIS OBJECT IS DEPRECATED ****** This object allows switch to enable or disable tftp. Default value is 2. Cannot be enabled if sftp is enabled.
T/F hpicfDownloadTftp6ServerConfig	1.3.6.1.4.1.11.2.14.11.1.3.8	TruthValue	read-write	******* THIS OBJECT IS DEPRECATED ****** When this is true(1), the TFTP server is enabled and will process incoming requests. When this is false(2), the TFTP server will be shut down and will not accept incoming connections.
I32 hpicfDownloadTftpClientBlkSize	1.3.6.1.4.1.11.2.14.11.1.3.13	Integer32	read-write	The size of the TFTP Client block size in bytes. This value can be set only when hpicfDownloadTftpClientConfig is enabled. When hpicfDownloadTftpClientConfig is disabled, this value is reset to its default value. The actual range of the supported block size depends on the implementation.
INT hpicfDownloadTftpClientConfig	1.3.6.1.4.1.11.2.14.11.1.3.12	INTEGER	read-write	This object enables or disables the TFTP client on the switch. The TFTP client is disabled when SFTP and SCP file transfer modes are enabled. A value of (1) indicates that TFTP client is enabled on the switch. A value of (2) indicates that TFTP client is disabled on the switch.
INT hpicfDownloadTftpConfig	1.3.6.1.4.1.11.2.14.11.1.3.5	INTEGER	read-write	This object allows switch to enable or disable tftp. Default value is 2. Cannot be enabled if sftp is enabled.
T/F hpicfDownloadTftpServerConfig	1.3.6.1.4.1.11.2.14.11.1.3.6	TruthValue	read-write	When this is true(1), the TFTP server is enabled and will process incoming requests. When this is false(2), the TFTP server will be shut down and will not accept incoming connections.

OID symbolic	OID numeric	Type	Access	Description
hpicfDownloadMib	1.3.6.1.4.1.11.2.14.10.2.4			This MIB module manages the network download capabilities for devices in the HP Integrated Communication Facility product line.
hpicfDownloadConformance	1.3.6.1.4.1.11.2.14.10.2.4.1
hpicfDownloadCompliances	1.3.6.1.4.1.11.2.14.10.2.4.1.1
hpicfDownloadCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.1			******* THIS COMPLIANCE IS DEPRECATED ******* The compliance statement for HP ICF network downloadable devices.
hpicfDownloadConfigCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.2			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.3			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadAutoTftpCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.4			The compliance statement for HP ICF network downloadable devices that allows automatic download of a firmware-image on boot.
hpicfDownloadConfigInetCompliance1	1.3.6.1.4.1.11.2.14.10.2.4.1.1.5			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance2	1.3.6.1.4.1.11.2.14.10.2.4.1.1.6			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance3	1.3.6.1.4.1.11.2.14.10.2.4.1.1.7			A New version of the compliance statement for HP ICF network downloadable devices that allows monitoring of downloads in progress and directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance4	1.3.6.1.4.1.11.2.14.10.2.4.1.1.8			A New version of the compliance statement for HP ICF network downloadable devices that allows monitoring of downloads in progress and directing a download to different destinations on the device.
hpicfDownloadGroups	1.3.6.1.4.1.11.2.14.10.2.4.1.2
hpicfDownloadGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.1			******* THIS GROUP IS DEPRECATED ******* A collection of objects for controlling network download of device firmware to ICF devices.
hpicfDownloadLogGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.2			A collection of objects for maintaining a log of network download attempts to ICF devices.
hpicfDownloadConfigGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.3			A collection of objects for controlling and monitoring network download of device firmware to ICF devices.
hpicfDownloadConfigInetGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.4			A collection of objects for controlling and monitoring network download of device firmware to ICF devices.
hpicfDownloadAutoTftpGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.5			A collection of objects for controlling automatic download of a firmware image to the device.
hpicfDownloadConfigOtherGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.6			A collection of objects for controlling automatic download of a firmware image to the device.
hpicfDownloadConfigOtherGroup1	1.3.6.1.4.1.11.2.14.10.2.4.1.2.7			A collection of objects for controlling automatic download of a firmware image to the device.
hpicfDownloadConfigOtherGroup2	1.3.6.1.4.1.11.2.14.10.2.4.1.2.8			A collection of objects for controlling the automatic download of a firmware on the device.
hpicfDownloadConfigOtherGroup3	1.3.6.1.4.1.11.2.14.10.2.4.1.2.9			A collection of objects for controlling the automatic download of a firmware on the device.
hpicfDownload	1.3.6.1.4.1.11.2.14.11.1.3
hpicfDownloadTable	1.3.6.1.4.1.11.2.14.11.1.3.1		not-accessible	A table of firmware downloads to this device. There will at any time be either 0 or 1 rows in this table, and the only valid index for this table is 1. It is only a table so that we may take advantage of the RowStatus textual convention for configuring the download parameters. Since this table does not support IPv6, it is deprecated in favor of hpicfDownloadInetTable.
hpicfDownloadEntry	1.3.6.1.4.1.11.2.14.11.1.3.1.1		not-accessible	The row in the hpicfDownloadTable containing the download parameters. Since this table does not support IPv6, it is deprecated in favor of hpicfDownloadInetEntry.
INT hpicfDownloadIndex	1.3.6.1.4.1.11.2.14.11.1.3.1.1.1	INTEGER	read-only	The index which uniquely identifies this row. The only legal value for this object is 1.
ADR hpicfDownloadOwnerAddress	1.3.6.1.4.1.11.2.14.11.1.3.1.1.2	TAddress	read-only	The transport address of the management station that initiated this download attempt, formatted according to the value of the associated instance of hpicfDownloadOwnerDomain.
TDO hpicfDownloadOwnerDomain	1.3.6.1.4.1.11.2.14.11.1.3.1.1.3	TDomain	read-only	The kind of transport service used by the management station that initiated this download attempt.
ADR hpicfDownloadTAddress	1.3.6.1.4.1.11.2.14.11.1.3.1.1.4	TAddress	read-create	The transport address of the node to download firmware from, formatted according to the value of the associated instance of hpicfDownloadTDomain. An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
TDO hpicfDownloadTDomain	1.3.6.1.4.1.11.2.14.11.1.3.1.1.5	TDomain	read-create	The kind of transport service to be used for the download. Currently supports snmpUDPDomain and snmpIPXDomain. An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
STR hpicfDownloadFilename	1.3.6.1.4.1.11.2.14.11.1.3.1.1.6	DisplayString	read-create	Filename and path of file to download (maximum length of 63 characters + NULL). An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
INT hpicfDownloadResetType	1.3.6.1.4.1.11.2.14.11.1.3.1.1.7	INTEGER	read-create	The type of reset to perform after completion of the firmware download. Note that not all agents will support all possible values, and there may be other agent-specific values for this object.
INT hpicfDownloadErrorStatus	1.3.6.1.4.1.11.2.14.11.1.3.1.1.8	INTEGER	read-only	Status of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object: corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at hpicfDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts. hardwareError - there was a hardware problem on the agent that forced an abort of the download (see hpicfDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the hpicfDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of hpicfDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. Currently only used on JetDirect agents. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. Currently only used on JetDirect agents. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. Currently only used on JetDirect agents. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.
STR hpicfDownloadErrorText	1.3.6.1.4.1.11.2.14.11.1.3.1.1.9	DisplayString	read-only	A textual description of the current error status of the firmware download.
ROW hpicfDownloadStatus	1.3.6.1.4.1.11.2.14.11.1.3.1.1.10	RowStatus	read-create	The status of this download entry. This object may not be set to 'active' unless the following columnar objects exist in this row: hpicfDownloadTAddress, hpicfDownloadTDomain, hpicfDownloadFilename, and hpicfDownloadResetType.
I32 hpicfDownloadPassesLeft	1.3.6.1.4.1.11.2.14.11.1.3.1.1.11	Integer32	read-only	The number of passes remaining in the current download attempt. Some agents (currently JetDirect agents) require multiple passes through the download file in order to download a firmware image. This object indicates the number of passes remaining, including the current pass. The object is initialized by the agent to the number of passes required to complete the download when the corresponding instance of hpicfDownloadStatus is set to 'active'. It is decremented by one each time a pass completes.
I32 hpicfDownloadOctetCount	1.3.6.1.4.1.11.2.14.11.1.3.1.1.12	Integer32	read-only	The number of octets that have been transferred during the current pass. This object is initialized to zero by the agent when the corresponding instance of hpicfDownloadStatus is set to 'active', and reinitialized to zero at the beginning of each pass.
STR hpicfDownloadDestination	1.3.6.1.4.1.11.2.14.11.1.3.1.1.13	DisplayString	read-create	The destination of the download file on the agent. The allowable destination names depend on the type of agent being downloaded. In all cases, a destination of '/os/primary' or '/os/secondary' indicates that this is a download of the agent's firmware image. The agent will use '/os/primary' as the default value for this object when the row is created. ICF router agents also allow a download of a config file. Currently, the name of the config file on the agent is '/config'. An agent should reject an attempt to set this object to a destination name that does not make sense for this type of agent.
I32 hpicfDownloadLogMaxSize	1.3.6.1.4.1.11.2.14.11.1.3.2	Integer32	read-only	The maximum number of the download log entries supported by this agent. Note that 0 is a legal value for this variable.
G32 hpicfDownloadLogSize	1.3.6.1.4.1.11.2.14.11.1.3.3	Gauge32	read-only	The number of download log entries currently in the hpicfDownloadLogTable.
hpicfDownloadLogTable	1.3.6.1.4.1.11.2.14.11.1.3.4		not-accessible	A log of the hpicfDownloadSize most recent download attempts to this device. The first entry in the table is the oldest.
hpicfDownloadLogEntry	1.3.6.1.4.1.11.2.14.11.1.3.4.1		not-accessible	An entry in the hpicfDownloadLogTable containing information about a single download attempt.
I32 hpicfDlLogIndex	1.3.6.1.4.1.11.2.14.11.1.3.4.1.1	Integer32	read-only	The index of this entry in the download log table. Index 1 will always contain the oldest entry. If the table is full when a download attempt is made, the new entry becomes the last entry (hpicfDownloadLogMaxSize), and all earlier entries are shifted down by one entry, removing the old index 1.
ADR hpicfDlLogOwnerAddress	1.3.6.1.4.1.11.2.14.11.1.3.4.1.2	TAddress	read-only	The transport address of the management station that attempted to initiate a download of this device, formatted according to the value of hpicfDlLastOwnerDomain.
TDO hpicfDlLogOwnerDomain	1.3.6.1.4.1.11.2.14.11.1.3.4.1.3	TDomain	read-only	The kind of transport service used by the management station that attempted to initiate a download of this device.
ADR hpicfDlLogTAddress	1.3.6.1.4.1.11.2.14.11.1.3.4.1.4	TAddress	read-only	The transport address of the node from which this device attempted to download firmware, formatted according to the value of hpicfDlLastTDomain.
TDO hpicfDlLogTDomain	1.3.6.1.4.1.11.2.14.11.1.3.4.1.5	TDomain	read-only	The kind of transport service which was used for the attempt to download firmware to this device.
STR hpicfDlLogFilename	1.3.6.1.4.1.11.2.14.11.1.3.4.1.6	DisplayString	read-only	The filename from which this device attempted to download firmware.
INT hpicfDlLogResetType	1.3.6.1.4.1.11.2.14.11.1.3.4.1.7	INTEGER	read-only	The type of reset requested to be performed after completion of the firmware download attempt.
INT hpicfDlLogErrorStatus	1.3.6.1.4.1.11.2.14.11.1.3.4.1.8	INTEGER	read-only	The result of the attempt to download firmware to this device. The values are the same as the corresponding values of hpicfDownloadErrorStatus.
STR hpicfDlLogErrorText	1.3.6.1.4.1.11.2.14.11.1.3.4.1.9	DisplayString	read-only	A textual description of the final error status of the attempt to download firmware to this device.
INT hpicfDownloadTftpConfig	1.3.6.1.4.1.11.2.14.11.1.3.5	INTEGER	read-write	This object allows switch to enable or disable tftp. Default value is 2. Cannot be enabled if sftp is enabled.
T/F hpicfDownloadTftpServerConfig	1.3.6.1.4.1.11.2.14.11.1.3.6	TruthValue	read-write	When this is true(1), the TFTP server is enabled and will process incoming requests. When this is false(2), the TFTP server will be shut down and will not accept incoming connections.
INT hpicfDownloadTftp6Config	1.3.6.1.4.1.11.2.14.11.1.3.7	INTEGER	read-write	******* THIS OBJECT IS DEPRECATED ****** This object allows switch to enable or disable tftp. Default value is 2. Cannot be enabled if sftp is enabled.
T/F hpicfDownloadTftp6ServerConfig	1.3.6.1.4.1.11.2.14.11.1.3.8	TruthValue	read-write	******* THIS OBJECT IS DEPRECATED ****** When this is true(1), the TFTP server is enabled and will process incoming requests. When this is false(2), the TFTP server will be shut down and will not accept incoming connections.
hpicfDownloadInetTable	1.3.6.1.4.1.11.2.14.11.1.3.9		not-accessible	A table of firmware downloads to this device. There will at any time be either 0 or 1 rows in this table, and the only valid index for this table is 1. It is only a table so that we may take advantage of the RowStatus textual convention for configuring the download parameters.
hpicfDownloadInetEntry	1.3.6.1.4.1.11.2.14.11.1.3.9.1		not-accessible	The row in the hpicfDownloadInetTable containing the download parameters.
I32 hpicfDownloadInetIndex	1.3.6.1.4.1.11.2.14.11.1.3.9.1.1	Integer32	read-only	The index which uniquely identifies this row.
IPt hpicfDownloadInetTAddressType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.2	InetAddressType	read-write	The type of address in the corresponding hpicfDownloadTAddress object. An attempt to modify this value will fail if the associated hpicfDownloadInetStatus object would be equal to 'active' both before and after the modification attempt.
IP hpicfDownloadInetTAddress	1.3.6.1.4.1.11.2.14.11.1.3.9.1.3	InetAddress	read-create	The transport address of the node to download firmware from, formatted according to the value of the associated instance of hpicfDownloadInetTAddressType. An attempt to modify this value will fail if the associated hpicfDownloadInetStatus object would be equal to 'active' both before and after the modification attempt.
STR hpicfDownloadInetFilename	1.3.6.1.4.1.11.2.14.11.1.3.9.1.4	DisplayString	read-create	Filename and path of file to download (maximum length of 63 characters + NULL). An attempt to modify this value will fail if the associated hpicfDownloadInetStatus object would be equal to 'active' both before and after the modification attempt.
IPt hpicfDownloadInetOwnerAddressType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.5	InetAddressType	read-write	The type of address in the corresponding hpicfDownloadInetOwnerAddress object.
IP hpicfDownloadInetOwnerAddress	1.3.6.1.4.1.11.2.14.11.1.3.9.1.6	InetAddress	read-only	The transport address of the management station that initiated this download attempt, formatted according to the value of the associated instance of hpicfDownloadInetOwnerAddressType.
I32 hpicfDownloadInetSourcePort	1.3.6.1.4.1.11.2.14.11.1.3.9.1.7	Integer32	read-write	The port of the management station that initiated this download attempt.
I32 hpicfDownloadInetDestinationPort	1.3.6.1.4.1.11.2.14.11.1.3.9.1.8	Integer32	read-write	The port of the management station that initiated this download attempt.
INT hpicfDownloadInetFileTransferType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.9	INTEGER	read-write	The FileTransfer Method used by the management station to initiate the download attempt.
INT hpicfDownloadInetResetType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.10	INTEGER	read-create	The type of reset to perform after completion of the firmware download. Note that not all agents will support all possible values, and there may be other agent-specific values for this object.
INT hpicfDownloadInetErrorStatus	1.3.6.1.4.1.11.2.14.11.1.3.9.1.11	INTEGER	read-only	Status of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object: corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at hpicfDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts. hardwareError - there was a hardware problem on the agent that forced an abort of the download (see hpicfDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the hpicfDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of hpicfDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. Currently only used on JetDirect agents. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. Currently only used on JetDirect agents. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. Currently only used on JetDirect agents. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.
STR hpicfDownloadInetErrorText	1.3.6.1.4.1.11.2.14.11.1.3.9.1.12	DisplayString	read-only	A textual description of the current error status of the firmware download.
ROW hpicfDownloadInetStatus	1.3.6.1.4.1.11.2.14.11.1.3.9.1.13	RowStatus	read-create	The status of this download entry. This object may not be set to 'active' unless the following columnar objects exist in this row: hpicfDownloadInetTAddress, hpicfDownloadInetTAddressType, hpicfDownloadInetFilename, and hpicfDownloadInetResetType.
I32 hpicfDownloadInetPassesLeft	1.3.6.1.4.1.11.2.14.11.1.3.9.1.14	Integer32	read-only	The number of passes remaining in the current download attempt. Some agents (currently JetDirect agents) require multiple passes through the download file in order to download a firmware image. This object indicates the number of passes remaining, including the current pass. The object is initialized by the agent to the number of passes required to complete the download when the corresponding instance of hpicfDownloadStatus is set to 'active'. It is decremented by one each time a pass completes.
I32 hpicfDownloadInetOctetCount	1.3.6.1.4.1.11.2.14.11.1.3.9.1.15	Integer32	read-only	The number of octets that have been transferred during the current pass. This object is initialized to zero by the agent when the corresponding instance of hpicfDownloadStatus is set to 'active', and reinitialized to zero at the beginning of each pass.
STR hpicfDownloadInetDestination	1.3.6.1.4.1.11.2.14.11.1.3.9.1.16	DisplayString	read-create	The destination of the download file on the agent. The allowable destination names depend on the type of agent being downloaded. In case of firmware download,destination can be '/os/primary' or '/os/secondary' The agent will use '/os/primary' as the default value for this object when the row is created. In case of downloading a config file, this object is set to the name of the config file on the switch to where it should be downloaded. In case of downloading the startup config, this object is nullified as it is not used. ICF router agents also allow a download of a config file. Currently, the name of the config file on the agent is '/config'. If the hpicfDownloadInetOpType is set to ftget, an agent should reject an attempt to set this object to a destination name that does not make sense for this type of agent. If hpicfDownloadInetOpType is ftput this can be set to a filename present in the tftp server.
INT hpicfDownloadInetOpType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.17	INTEGER	read-write	The OpType which is used for Getting or Putting firmware, coreDump and config from/to the TFTP server.
INT hpicfDownloadInetFileType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.18	INTEGER	read-create	The FileType used by the management station to initiate the upload/download attempt. OpType-ftput is not supported for flash. OpType-ftget is not supported for runningConfig and coreDump
INT hpicfDownloadInetFileModeType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.19	INTEGER	read-create	The FileModeType used by the management station to initiate the download attempt.
PHY hpicfDownloadInetCoreDumpModule	1.3.6.1.4.1.11.2.14.11.1.3.9.1.20	PhysicalIndex	read-create	This object can be updated if the hpicfDownloadInetFileType is set to coreDump. Valid entPhysicalIndex for this object are management-modules and interface-modules.
T/F hpicfDownloadConfigFileUpdateEnabled	1.3.6.1.4.1.11.2.14.11.1.3.10	TruthValue	read-write	This object facilitates enabling/disabling configuration file update through DHCP. By default, this is enabled.
hpicfDownloadAutoTftpTable	1.3.6.1.4.1.11.2.14.11.1.3.11		not-accessible	A table for automatic firmware download to the device via TFTP during boot. The firmware image will be downloaded if it has a different version from the firmware running on the switch. There will be only one row at any time for this table, and the only valid index for this table is 1.
hpicfDownloadAutoTftpEntry	1.3.6.1.4.1.11.2.14.11.1.3.11.1		not-accessible	The row in the hpicfDownloadAutoTftpTable containing the auto-tftp download parameters.
I32 hpicfDownloadAutoTftpIndex	1.3.6.1.4.1.11.2.14.11.1.3.11.1.1	Integer32	not-accessible	The index which uniquely identifies this row.
IPt hpicfDownloadAutoTftpAddressType	1.3.6.1.4.1.11.2.14.11.1.3.11.1.2	InetAddressType	read-write	The type of address in the corresponding hpicfDownloadAutoTftpAddress object.
IP hpicfDownloadAutoTftpAddress	1.3.6.1.4.1.11.2.14.11.1.3.11.1.3	InetAddress	read-write	The tftp server address to download firmware from, formatted according to the value of the associated instance of hpicfDownloadAutoTftpAddressType.
STR hpicfDownloadAutoTftpRemoteFilename	1.3.6.1.4.1.11.2.14.11.1.3.11.1.4	DisplayString	read-write	The firmware image name to download from tftp-server. It can be upto 255 characters.
INT hpicfDownloadAutoTftpAdminStatus	1.3.6.1.4.1.11.2.14.11.1.3.11.1.5	INTEGER	read-write	This object enables/disables auto-tftp. The value of hpicfDownloadAutoTftpAddress, hpicfDownloadAutoTftpRemoteFilename can not be empty when hpicfDownloadAutoTftpAdminStatus is enabled.
INT hpicfDownloadTftpClientConfig	1.3.6.1.4.1.11.2.14.11.1.3.12	INTEGER	read-write	This object enables or disables the TFTP client on the switch. The TFTP client is disabled when SFTP and SCP file transfer modes are enabled. A value of (1) indicates that TFTP client is enabled on the switch. A value of (2) indicates that TFTP client is disabled on the switch.
I32 hpicfDownloadTftpClientBlkSize	1.3.6.1.4.1.11.2.14.11.1.3.13	Integer32	read-write	The size of the TFTP Client block size in bytes. This value can be set only when hpicfDownloadTftpClientConfig is enabled. When hpicfDownloadTftpClientConfig is disabled, this value is reset to its default value. The actual range of the supported block size depends on the implementation.

DisplayString (9)
STR hpicfDlLogErrorText	1.3.6.1.4.1.11.2.14.11.1.3.4.1.9	DisplayString	read-only	A textual description of the final error status of the attempt to download firmware to this device.
STR hpicfDlLogFilename	1.3.6.1.4.1.11.2.14.11.1.3.4.1.6	DisplayString	read-only	The filename from which this device attempted to download firmware.
STR hpicfDownloadAutoTftpRemoteFilename	1.3.6.1.4.1.11.2.14.11.1.3.11.1.4	DisplayString	read-write	The firmware image name to download from tftp-server. It can be upto 255 characters.
STR hpicfDownloadDestination	1.3.6.1.4.1.11.2.14.11.1.3.1.1.13	DisplayString	read-create	The destination of the download file on the agent. The allowable destination names depend on the type of agent being downloaded. In all cases, a destination of '/os/primary' or '/os/secondary' indicates that this is a download of the agent's firmware image. The agent will use '/os/primary' as the default value for this object when the row is created. ICF router agents also allow a download of a config file. Currently, the name of the config file on the agent is '/config'. An agent should reject an attempt to set this object to a destination name that does not make sense for this type of agent.
STR hpicfDownloadErrorText	1.3.6.1.4.1.11.2.14.11.1.3.1.1.9	DisplayString	read-only	A textual description of the current error status of the firmware download.
STR hpicfDownloadFilename	1.3.6.1.4.1.11.2.14.11.1.3.1.1.6	DisplayString	read-create	Filename and path of file to download (maximum length of 63 characters + NULL). An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
STR hpicfDownloadInetDestination	1.3.6.1.4.1.11.2.14.11.1.3.9.1.16	DisplayString	read-create	The destination of the download file on the agent. The allowable destination names depend on the type of agent being downloaded. In case of firmware download,destination can be '/os/primary' or '/os/secondary' The agent will use '/os/primary' as the default value for this object when the row is created. In case of downloading a config file, this object is set to the name of the config file on the switch to where it should be downloaded. In case of downloading the startup config, this object is nullified as it is not used. ICF router agents also allow a download of a config file. Currently, the name of the config file on the agent is '/config'. If the hpicfDownloadInetOpType is set to ftget, an agent should reject an attempt to set this object to a destination name that does not make sense for this type of agent. If hpicfDownloadInetOpType is ftput this can be set to a filename present in the tftp server.
STR hpicfDownloadInetErrorText	1.3.6.1.4.1.11.2.14.11.1.3.9.1.12	DisplayString	read-only	A textual description of the current error status of the firmware download.
STR hpicfDownloadInetFilename	1.3.6.1.4.1.11.2.14.11.1.3.9.1.4	DisplayString	read-create	Filename and path of file to download (maximum length of 63 characters + NULL). An attempt to modify this value will fail if the associated hpicfDownloadInetStatus object would be equal to 'active' both before and after the modification attempt.
Gauge32 (1)
G32 hpicfDownloadLogSize	1.3.6.1.4.1.11.2.14.11.1.3.3	Gauge32	read-only	The number of download log entries currently in the hpicfDownloadLogTable.
InetAddress (3)
IP hpicfDownloadAutoTftpAddress	1.3.6.1.4.1.11.2.14.11.1.3.11.1.3	InetAddress	read-write	The tftp server address to download firmware from, formatted according to the value of the associated instance of hpicfDownloadAutoTftpAddressType.
IP hpicfDownloadInetOwnerAddress	1.3.6.1.4.1.11.2.14.11.1.3.9.1.6	InetAddress	read-only	The transport address of the management station that initiated this download attempt, formatted according to the value of the associated instance of hpicfDownloadInetOwnerAddressType.
IP hpicfDownloadInetTAddress	1.3.6.1.4.1.11.2.14.11.1.3.9.1.3	InetAddress	read-create	The transport address of the node to download firmware from, formatted according to the value of the associated instance of hpicfDownloadInetTAddressType. An attempt to modify this value will fail if the associated hpicfDownloadInetStatus object would be equal to 'active' both before and after the modification attempt.
InetAddressType (3)
IPt hpicfDownloadAutoTftpAddressType	1.3.6.1.4.1.11.2.14.11.1.3.11.1.2	InetAddressType	read-write	The type of address in the corresponding hpicfDownloadAutoTftpAddress object.
IPt hpicfDownloadInetOwnerAddressType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.5	InetAddressType	read-write	The type of address in the corresponding hpicfDownloadInetOwnerAddress object.
IPt hpicfDownloadInetTAddressType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.2	InetAddressType	read-write	The type of address in the corresponding hpicfDownloadTAddress object. An attempt to modify this value will fail if the associated hpicfDownloadInetStatus object would be equal to 'active' both before and after the modification attempt.
INTEGER (15)
INT hpicfDlLogErrorStatus	1.3.6.1.4.1.11.2.14.11.1.3.4.1.8	INTEGER	read-only	The result of the attempt to download firmware to this device. The values are the same as the corresponding values of hpicfDownloadErrorStatus.
INT hpicfDlLogResetType	1.3.6.1.4.1.11.2.14.11.1.3.4.1.7	INTEGER	read-only	The type of reset requested to be performed after completion of the firmware download attempt.
INT hpicfDownloadAutoTftpAdminStatus	1.3.6.1.4.1.11.2.14.11.1.3.11.1.5	INTEGER	read-write	This object enables/disables auto-tftp. The value of hpicfDownloadAutoTftpAddress, hpicfDownloadAutoTftpRemoteFilename can not be empty when hpicfDownloadAutoTftpAdminStatus is enabled.
INT hpicfDownloadErrorStatus	1.3.6.1.4.1.11.2.14.11.1.3.1.1.8	INTEGER	read-only	Status of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object: corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at hpicfDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts. hardwareError - there was a hardware problem on the agent that forced an abort of the download (see hpicfDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the hpicfDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of hpicfDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. Currently only used on JetDirect agents. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. Currently only used on JetDirect agents. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. Currently only used on JetDirect agents. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.
INT hpicfDownloadIndex	1.3.6.1.4.1.11.2.14.11.1.3.1.1.1	INTEGER	read-only	The index which uniquely identifies this row. The only legal value for this object is 1.
INT hpicfDownloadInetErrorStatus	1.3.6.1.4.1.11.2.14.11.1.3.9.1.11	INTEGER	read-only	Status of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object: corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at hpicfDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts. hardwareError - there was a hardware problem on the agent that forced an abort of the download (see hpicfDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the hpicfDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of hpicfDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. Currently only used on JetDirect agents. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. Currently only used on JetDirect agents. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. Currently only used on JetDirect agents. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.
INT hpicfDownloadInetFileModeType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.19	INTEGER	read-create	The FileModeType used by the management station to initiate the download attempt.
INT hpicfDownloadInetFileTransferType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.9	INTEGER	read-write	The FileTransfer Method used by the management station to initiate the download attempt.
INT hpicfDownloadInetFileType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.18	INTEGER	read-create	The FileType used by the management station to initiate the upload/download attempt. OpType-ftput is not supported for flash. OpType-ftget is not supported for runningConfig and coreDump
INT hpicfDownloadInetOpType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.17	INTEGER	read-write	The OpType which is used for Getting or Putting firmware, coreDump and config from/to the TFTP server.
INT hpicfDownloadInetResetType	1.3.6.1.4.1.11.2.14.11.1.3.9.1.10	INTEGER	read-create	The type of reset to perform after completion of the firmware download. Note that not all agents will support all possible values, and there may be other agent-specific values for this object.
INT hpicfDownloadResetType	1.3.6.1.4.1.11.2.14.11.1.3.1.1.7	INTEGER	read-create	The type of reset to perform after completion of the firmware download. Note that not all agents will support all possible values, and there may be other agent-specific values for this object.
INT hpicfDownloadTftp6Config	1.3.6.1.4.1.11.2.14.11.1.3.7	INTEGER	read-write	******* THIS OBJECT IS DEPRECATED ****** This object allows switch to enable or disable tftp. Default value is 2. Cannot be enabled if sftp is enabled.
INT hpicfDownloadTftpClientConfig	1.3.6.1.4.1.11.2.14.11.1.3.12	INTEGER	read-write	This object enables or disables the TFTP client on the switch. The TFTP client is disabled when SFTP and SCP file transfer modes are enabled. A value of (1) indicates that TFTP client is enabled on the switch. A value of (2) indicates that TFTP client is disabled on the switch.
INT hpicfDownloadTftpConfig	1.3.6.1.4.1.11.2.14.11.1.3.5	INTEGER	read-write	This object allows switch to enable or disable tftp. Default value is 2. Cannot be enabled if sftp is enabled.
Integer32 (11)
I32 hpicfDlLogIndex	1.3.6.1.4.1.11.2.14.11.1.3.4.1.1	Integer32	read-only	The index of this entry in the download log table. Index 1 will always contain the oldest entry. If the table is full when a download attempt is made, the new entry becomes the last entry (hpicfDownloadLogMaxSize), and all earlier entries are shifted down by one entry, removing the old index 1.
I32 hpicfDownloadAutoTftpIndex	1.3.6.1.4.1.11.2.14.11.1.3.11.1.1	Integer32	not-accessible	The index which uniquely identifies this row.
I32 hpicfDownloadInetDestinationPort	1.3.6.1.4.1.11.2.14.11.1.3.9.1.8	Integer32	read-write	The port of the management station that initiated this download attempt.
I32 hpicfDownloadInetIndex	1.3.6.1.4.1.11.2.14.11.1.3.9.1.1	Integer32	read-only	The index which uniquely identifies this row.
I32 hpicfDownloadInetOctetCount	1.3.6.1.4.1.11.2.14.11.1.3.9.1.15	Integer32	read-only	The number of octets that have been transferred during the current pass. This object is initialized to zero by the agent when the corresponding instance of hpicfDownloadStatus is set to 'active', and reinitialized to zero at the beginning of each pass.
I32 hpicfDownloadInetPassesLeft	1.3.6.1.4.1.11.2.14.11.1.3.9.1.14	Integer32	read-only	The number of passes remaining in the current download attempt. Some agents (currently JetDirect agents) require multiple passes through the download file in order to download a firmware image. This object indicates the number of passes remaining, including the current pass. The object is initialized by the agent to the number of passes required to complete the download when the corresponding instance of hpicfDownloadStatus is set to 'active'. It is decremented by one each time a pass completes.
I32 hpicfDownloadInetSourcePort	1.3.6.1.4.1.11.2.14.11.1.3.9.1.7	Integer32	read-write	The port of the management station that initiated this download attempt.
I32 hpicfDownloadLogMaxSize	1.3.6.1.4.1.11.2.14.11.1.3.2	Integer32	read-only	The maximum number of the download log entries supported by this agent. Note that 0 is a legal value for this variable.
I32 hpicfDownloadOctetCount	1.3.6.1.4.1.11.2.14.11.1.3.1.1.12	Integer32	read-only	The number of octets that have been transferred during the current pass. This object is initialized to zero by the agent when the corresponding instance of hpicfDownloadStatus is set to 'active', and reinitialized to zero at the beginning of each pass.
I32 hpicfDownloadPassesLeft	1.3.6.1.4.1.11.2.14.11.1.3.1.1.11	Integer32	read-only	The number of passes remaining in the current download attempt. Some agents (currently JetDirect agents) require multiple passes through the download file in order to download a firmware image. This object indicates the number of passes remaining, including the current pass. The object is initialized by the agent to the number of passes required to complete the download when the corresponding instance of hpicfDownloadStatus is set to 'active'. It is decremented by one each time a pass completes.
I32 hpicfDownloadTftpClientBlkSize	1.3.6.1.4.1.11.2.14.11.1.3.13	Integer32	read-write	The size of the TFTP Client block size in bytes. This value can be set only when hpicfDownloadTftpClientConfig is enabled. When hpicfDownloadTftpClientConfig is disabled, this value is reset to its default value. The actual range of the supported block size depends on the implementation.
PhysicalIndex (1)
PHY hpicfDownloadInetCoreDumpModule	1.3.6.1.4.1.11.2.14.11.1.3.9.1.20	PhysicalIndex	read-create	This object can be updated if the hpicfDownloadInetFileType is set to coreDump. Valid entPhysicalIndex for this object are management-modules and interface-modules.
RowStatus (2)
ROW hpicfDownloadInetStatus	1.3.6.1.4.1.11.2.14.11.1.3.9.1.13	RowStatus	read-create	The status of this download entry. This object may not be set to 'active' unless the following columnar objects exist in this row: hpicfDownloadInetTAddress, hpicfDownloadInetTAddressType, hpicfDownloadInetFilename, and hpicfDownloadInetResetType.
ROW hpicfDownloadStatus	1.3.6.1.4.1.11.2.14.11.1.3.1.1.10	RowStatus	read-create	The status of this download entry. This object may not be set to 'active' unless the following columnar objects exist in this row: hpicfDownloadTAddress, hpicfDownloadTDomain, hpicfDownloadFilename, and hpicfDownloadResetType.
TAddress (4)
ADR hpicfDlLogOwnerAddress	1.3.6.1.4.1.11.2.14.11.1.3.4.1.2	TAddress	read-only	The transport address of the management station that attempted to initiate a download of this device, formatted according to the value of hpicfDlLastOwnerDomain.
ADR hpicfDlLogTAddress	1.3.6.1.4.1.11.2.14.11.1.3.4.1.4	TAddress	read-only	The transport address of the node from which this device attempted to download firmware, formatted according to the value of hpicfDlLastTDomain.
ADR hpicfDownloadOwnerAddress	1.3.6.1.4.1.11.2.14.11.1.3.1.1.2	TAddress	read-only	The transport address of the management station that initiated this download attempt, formatted according to the value of the associated instance of hpicfDownloadOwnerDomain.
ADR hpicfDownloadTAddress	1.3.6.1.4.1.11.2.14.11.1.3.1.1.4	TAddress	read-create	The transport address of the node to download firmware from, formatted according to the value of the associated instance of hpicfDownloadTDomain. An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
TDomain (4)
TDO hpicfDlLogOwnerDomain	1.3.6.1.4.1.11.2.14.11.1.3.4.1.3	TDomain	read-only	The kind of transport service used by the management station that attempted to initiate a download of this device.
TDO hpicfDlLogTDomain	1.3.6.1.4.1.11.2.14.11.1.3.4.1.5	TDomain	read-only	The kind of transport service which was used for the attempt to download firmware to this device.
TDO hpicfDownloadOwnerDomain	1.3.6.1.4.1.11.2.14.11.1.3.1.1.3	TDomain	read-only	The kind of transport service used by the management station that initiated this download attempt.
TDO hpicfDownloadTDomain	1.3.6.1.4.1.11.2.14.11.1.3.1.1.5	TDomain	read-create	The kind of transport service to be used for the download. Currently supports snmpUDPDomain and snmpIPXDomain. An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both before and after the modification attempt.
TruthValue (3)
T/F hpicfDownloadConfigFileUpdateEnabled	1.3.6.1.4.1.11.2.14.11.1.3.10	TruthValue	read-write	This object facilitates enabling/disabling configuration file update through DHCP. By default, this is enabled.
T/F hpicfDownloadTftp6ServerConfig	1.3.6.1.4.1.11.2.14.11.1.3.8	TruthValue	read-write	******* THIS OBJECT IS DEPRECATED ****** When this is true(1), the TFTP server is enabled and will process incoming requests. When this is false(2), the TFTP server will be shut down and will not accept incoming connections.
T/F hpicfDownloadTftpServerConfig	1.3.6.1.4.1.11.2.14.11.1.3.6	TruthValue	read-write	When this is true(1), the TFTP server is enabled and will process incoming requests. When this is false(2), the TFTP server will be shut down and will not accept incoming connections.
No type (30)
hpicfDownload	1.3.6.1.4.1.11.2.14.11.1.3
hpicfDownloadAutoTftpCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.4			The compliance statement for HP ICF network downloadable devices that allows automatic download of a firmware-image on boot.
hpicfDownloadAutoTftpEntry	1.3.6.1.4.1.11.2.14.11.1.3.11.1		not-accessible	The row in the hpicfDownloadAutoTftpTable containing the auto-tftp download parameters.
hpicfDownloadAutoTftpGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.5			A collection of objects for controlling automatic download of a firmware image to the device.
hpicfDownloadAutoTftpTable	1.3.6.1.4.1.11.2.14.11.1.3.11		not-accessible	A table for automatic firmware download to the device via TFTP during boot. The firmware image will be downloaded if it has a different version from the firmware running on the switch. There will be only one row at any time for this table, and the only valid index for this table is 1.
hpicfDownloadCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.1			******* THIS COMPLIANCE IS DEPRECATED ******* The compliance statement for HP ICF network downloadable devices.
hpicfDownloadCompliances	1.3.6.1.4.1.11.2.14.10.2.4.1.1
hpicfDownloadConfigCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.2			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadConfigGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.3			A collection of objects for controlling and monitoring network download of device firmware to ICF devices.
hpicfDownloadConfigInetCompliance	1.3.6.1.4.1.11.2.14.10.2.4.1.1.3			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance1	1.3.6.1.4.1.11.2.14.10.2.4.1.1.5			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance2	1.3.6.1.4.1.11.2.14.10.2.4.1.1.6			New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance3	1.3.6.1.4.1.11.2.14.10.2.4.1.1.7			A New version of the compliance statement for HP ICF network downloadable devices that allows monitoring of downloads in progress and directing a download to different destinations on the device.
hpicfDownloadConfigInetCompliance4	1.3.6.1.4.1.11.2.14.10.2.4.1.1.8			A New version of the compliance statement for HP ICF network downloadable devices that allows monitoring of downloads in progress and directing a download to different destinations on the device.
hpicfDownloadConfigInetGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.4			A collection of objects for controlling and monitoring network download of device firmware to ICF devices.
hpicfDownloadConfigOtherGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.6			A collection of objects for controlling automatic download of a firmware image to the device.
hpicfDownloadConfigOtherGroup1	1.3.6.1.4.1.11.2.14.10.2.4.1.2.7			A collection of objects for controlling automatic download of a firmware image to the device.
hpicfDownloadConfigOtherGroup2	1.3.6.1.4.1.11.2.14.10.2.4.1.2.8			A collection of objects for controlling the automatic download of a firmware on the device.
hpicfDownloadConfigOtherGroup3	1.3.6.1.4.1.11.2.14.10.2.4.1.2.9			A collection of objects for controlling the automatic download of a firmware on the device.
hpicfDownloadConformance	1.3.6.1.4.1.11.2.14.10.2.4.1
hpicfDownloadEntry	1.3.6.1.4.1.11.2.14.11.1.3.1.1		not-accessible	The row in the hpicfDownloadTable containing the download parameters. Since this table does not support IPv6, it is deprecated in favor of hpicfDownloadInetEntry.
hpicfDownloadGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.1			******* THIS GROUP IS DEPRECATED ******* A collection of objects for controlling network download of device firmware to ICF devices.
hpicfDownloadGroups	1.3.6.1.4.1.11.2.14.10.2.4.1.2
hpicfDownloadInetEntry	1.3.6.1.4.1.11.2.14.11.1.3.9.1		not-accessible	The row in the hpicfDownloadInetTable containing the download parameters.
hpicfDownloadInetTable	1.3.6.1.4.1.11.2.14.11.1.3.9		not-accessible	A table of firmware downloads to this device. There will at any time be either 0 or 1 rows in this table, and the only valid index for this table is 1. It is only a table so that we may take advantage of the RowStatus textual convention for configuring the download parameters.
hpicfDownloadLogEntry	1.3.6.1.4.1.11.2.14.11.1.3.4.1		not-accessible	An entry in the hpicfDownloadLogTable containing information about a single download attempt.
hpicfDownloadLogGroup	1.3.6.1.4.1.11.2.14.10.2.4.1.2.2			A collection of objects for maintaining a log of network download attempts to ICF devices.
hpicfDownloadLogTable	1.3.6.1.4.1.11.2.14.11.1.3.4		not-accessible	A log of the hpicfDownloadSize most recent download attempts to this device. The first entry in the table is the oldest.
hpicfDownloadMib	1.3.6.1.4.1.11.2.14.10.2.4			This MIB module manages the network download capabilities for devices in the HP Integrated Communication Facility product line.
hpicfDownloadTable	1.3.6.1.4.1.11.2.14.11.1.3.1		not-accessible	A table of firmware downloads to this device. There will at any time be either 0 or 1 rows in this table, and the only valid index for this table is 1. It is only a table so that we may take advantage of the RowStatus textual convention for configuring the download parameters. Since this table does not support IPv6, it is deprecated in favor of hpicfDownloadInetTable.

RFC description

HP ICF network download and firmware update management via TFTP and other protocols.

Start monitoring HP ProCurve switch (firmware/software image download management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-DOWNLOAD

This MIB depends on

Related MIBs

What Is HP-ICF-DOWNLOAD?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description