HPN-ICF-DOT11-STATION-MIB

All MIBs › HPN-ICF-DOT11-STATION-MIB

Last Updated: 2010-09-02

Category: Technology: Wireless, Vendor: H3C/HH3C, Vendor: HP/HPE, Wireless and WLAN

Description: HP Networking ICF SNMP MIB for 802.11 wireless station statistics including per-client throughput and signal quality on HP WLAN devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-DOT11-STATION-MIB?

HPN-ICF-DOT11-STATION-MIB is an HP/H3C Comware proprietary MIB reporting associated wireless station (client) detail on HP/H3C wireless access points. Its association table, per station, records MAC address, IP address, username (if authenticated), negotiated transmit rate set, session uptime, signal strength, RSSI, and operating channel. As a hardware/performance MIB it lets a wireless administrator diagnose a specific client's connection quality — low RSSI or a reduced rate set often explains a poor Wi-Fi experience for that user. It is deployed on HP/H3C Comware wireless access points. Engineers can download the HPN-ICF-DOT11-STATION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-DOT11-STATION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware wireless access points

Monitoring Examples

A wireless engineer checks hpnicfDot11StationRSSI and hpnicfDot11StationTxRateSet for a client reporting a poor Wi-Fi experience, confirming whether weak signal or rate negotiation is the root cause.

What Can Be Monitored

per-station signal strength/RSSI, negotiated rate, and session uptime

Imported Objects

From HPN-ICF-DOT11-REF-MIB

HpnicfDot11AKMType
HpnicfDot11AssocFailType
HpnicfDot11AuthenType
HpnicfDot11AuthorFailType
HpnicfDot11ChannelScopeType
HpnicfDot11CipherType
HpnicfDot11ObjectIDType
HpnicfDot11RadioScopeType
HpnicfDot11RadioType
HpnicfDot11RadioType2
HpnicfDot11SSIDEncryptModeType
HpnicfDot11SSIDStringType
HpnicfDot11SecIEStatusType
hpnicfDot11	MODULE-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfDot11StationRxFrameCnt OID:

Select an HP/H3C Comware wireless access point (client station detail) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfDot11StationRxFrameCnt into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Represents the count of frames that are received by AP from station. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfDot11STATION	1.3.6.1.4.1.11.2.14.11.15.2.75.3			This MIB defines the configuration and statistic information of stations. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associated with the AP. station (Client Station) A wireless device in a wireless network associated with an access point. MIC Message Integrity Check. A MIC can, optionally, be added to WEP-encrypted 802.11 frames. SSID Radio Service Set ID. It is used for identification during association. STA (WSTA) A non-AP 802.11 wireless station. WEP Wired Equivalent Privacy. 'WEP' is generally used to refer to 802.11 encryption. RSSI It is the received signal strength indication. It suggests the quality of received signal. RTS Request to Send, it is used to gain control of the medium for the transmission of 'large' frames, in which 'large' is defined by the RTS threshold in the network card driver. CTS Clear to Send, it is used to answer RTS frames. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
hpnicfDot11StationMtGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1
hpnicfDot11StationAssociateTable	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1		not-accessible	This table contains the information of stations which are associating with the wireless network (current AC).
hpnicfDot11StationAssociateEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1		not-accessible	Each entry contains association information of each station.
MAC hpnicfDot11StationMAC	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.1	MacAddress	not-accessible	Represents the unique MAC Address of station.
IP hpnicfDot11StationIPAddress	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.2	IpAddress	read-only	Represents the IP address of the station.
OCT hpnicfDot11StationUserName	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.3	OCTET STRING	read-only	Represents the user name of the station.
OCT hpnicfDot11StationTxRateSet	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.4	OCTET STRING	read-only	Represents the current transmit data rates for this station. Each byte will represent one rate. If the MSB(Most significant bit) is set, then this rate is a mandantory rate. Otherwise, it is optional.
U32 hpnicfDot11StationUpTime	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.5	Unsigned32	read-only	The time in seconds, how long this station has been associated with this device.
I32 hpnicfDot11StationSignalStrength	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.6	Integer32	read-only	Represents a device-dependent measure of the signal strength of latest packet received from this station.
I32 hpnicfDot11StationRSSI	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.7	Integer32	read-only	Represents a device-dependent measure of the RSSI. It is the received signal strength indication. The maximum value is defined by chip set vendors
HPN hpnicfDot11StationChannel	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.8	HpnicfDot11ChannelScopeType	read-only	Represents current radio channel used by station.
INT hpnicfDot11StationPowerSaveMode	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.9	INTEGER	read-only	Represents the power management mode of this station. The following values are supported: active - This station is not in power-save mode and it is actively sending or receiving data. powersave - This station is in power-save mode and it wakes up after sometime to check for buffer data.
I32 hpnicfDot11StationAid	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.10	Integer32	read-only	Represents the association identification number of station.
I32 hpnicfDot11StationVlanId	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.11	Integer32	read-only	Represents Vlan ID to which the station is associated.
STR hpnicfDot11StationSSIDName	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.12	HpnicfDot11SSIDStringType	read-only	Represents the ESS name.
HPN hpnicfDot11StationAuthenMode	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.13	HpnicfDot11AuthenType	read-only	Represents the Authentication mode defined by 802.11.
HPN hpnicfDot11StationAKMMode	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.14	HpnicfDot11AKMType	read-only	Represents the key management mode defined by 802.11i.
HPN hpnicfDot11StationSecurityCiphers	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.15	HpnicfDot11CipherType	read-only	Represents the frame encryption cipher type used by station.
HPN hpnicfDot11StationSSIDEncryptMode	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.16	HpnicfDot11SSIDEncryptModeType	read-only	Represents the encryption mode for this ESS.
I32 hpnicfDot11StationRxSNR	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.17	Integer32	read-only	Represents the signal and noise strength ratio of frame reception.
I32 hpnicfDot11StationTxRate	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.18	Integer32	read-only	Represents the transmission rate of frame.
I32 hpnicfDot11StationRxRate	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.19	Integer32	read-only	Represents the reception rate of frame.
OCT hpnicfDot11StationVendorName	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.20	OCTET STRING	read-only	Represents the vendor name of the station.
HPN hpnicfDot11StationRadioMode	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.21	HpnicfDot11RadioType	read-only	Represents which radio type supported by the station. The WLAN system support the following possible radio types. dot11a(1), dot11b(2), dot11g(4), dot11n(8) For a station,it could support only one radio type at the same time.
I32 hpnicfDot11StationRxNoise	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.22	Integer32	read-only	Represents the received noise of the station.
MAC hpnicfDot11StationMACAddress	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.23	MacAddress	read-only	Represents MAC Address of station.
I32 hpnicfDot11StationTxSpeed	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.24	Integer32	read-only	Represents the bytes of transmitted data frames to the station per second in sample interval.
I32 hpnicfDot11StationRxSpeed	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.25	Integer32	read-only	Represents the bytes of received data frames from the station per second in sample interval.
INT hpnicfDot11StationWmmMode	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.26	INTEGER	read-only	Represents the QoS mode of station. The following values are supported: wmm - This QoS function is supported by this station. nonwmm - This QoS function is not supported by this station.
HPN hpnicfDot11StationSecIEStatus	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.27	HpnicfDot11SecIEStatusType	read-only	Represents the security Information element for this station.
TIK hpnicfDot11StationUpTimeTicks	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.28	TimeTicks	read-only	Represents how long this station has been associated with this device.
HPN hpnicfDot11StationRadioMode2	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.29	HpnicfDot11RadioType2	read-only	Represents which radio type supported by the station. The WLAN system support the following possible radio types. dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16) For a station,it could support only one radio type at the same time.
DAT hpnicfDot11StationAssTime	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.30	DateAndTime	read-only	Represents the time at which the station connected.
INT hpnicfDot11StationUserAuthType	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.31	INTEGER	read-only	Represents the type of user authentication with this station. portalAuth - The authentication lunched by portal pop-up program which is need input username and passward,exclude MAC authentication. authFree - There is no need others authentiaction,user will surf internet after association. associateAuth - Include WEP PSK 802.1X authentication. macAuth - MAC Authentication apply with access device, a Remote Authentication Dial-In User Service (RADIUS) server or message netgate to realize fast authentication.
T/F hpnicfDot11StationRfPingTest	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.32	TruthValue	read-write	This object is used to start rfping test of the station. It will return false for get operation.
I32 hpnicfDot11StationMaxRate	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.33	Integer32	read-only	Represents the max negotiation rate of the station.
INT hpnicfDot11StationPowerSaveModeCM	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.34	INTEGER	read-only	Represents the power management mode of the client. The following values are supported: active - This client is not in power-save mode and it is actively sending or receiving data. powersave - This client is in power-save mode and it wakes up after some time to check for buffer data.
INT hpnicfDot11StationAuthenModeCM	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.35	INTEGER	read-only	Represents the authentication mode defined by 802.11. The following values are supported: opensystem - Do not authenticate. sharedkey - System will use challenge message to authenticate the client.
INT hpnicfDot11StationAKMModeCM	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.36	INTEGER	read-only	Represents the key management mode defined by 802.11i. The following values are supported: none - no key management mode configured, psk - pre-shared key authentication, radius - 802.1x authentication, wlanex - wlanex.
INT hpnicfDot11StationSecurityCiphersCM	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.37	INTEGER	read-only	Represents the frame encryption cipher type used by station. The following values are supported: none - clear text or no cipher method is configure, wep40 - 40-bit WEP key, wep104 - 104-bit WEP key, tkip - WPA Temporal Key encryption, aesccmp - WPA AES CCMP encryption, wpisms4 - ext encryption.
INT hpnicfDot11StationSecIEStatusCM	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.38	INTEGER	read-only	Represents the security Information element for this station. The following values are supported: none - both wpa and wpa2 are disabled, wpa - only enable wpa, wpa2 - only enable wpa2, wlanex - only enable wlanex.
hpnicfDot11StationAPRelationTable	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2		not-accessible	This table contains relation-ship between station, AP, Radio and WLANID, and the detailed information of station is kept in the hpnicfDot11StaAssociateTable table.
hpnicfDot11StationAPRelationEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1		not-accessible	Each entry contains relation-ship information with AP, Radio and WLANID of each station.
HPN hpnicfDot11CurrAPID	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.1	HpnicfDot11ObjectIDType	read-only	To uniquely identify each AP, and relation-ship between hpnicfDot11CurrAPID and AP device will be static.
HPN hpnicfDot11CurrRadioID	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.2	HpnicfDot11RadioScopeType	read-only	Represents each radio.
I32 hpnicfDot11CurrWlanID	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.3	Integer32	read-only	Represents WLAN ID of the BSS the station associated to.
I32 hpnicfDot11CurrAntennaID	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.4	Integer32	read-only	Represents Antenna ID of the station associated to.
hpnicfDot11StationStatisTable	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3		not-accessible	This table contains statistics and status of all stations in the hpnicfDot11StaAssociateTable.
hpnicfDot11StationStatisEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1		not-accessible	This entry contains statistics and status for each station.
C32 hpnicfDot11StationRxFrameCntEx	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.1	Counter32	read-only	Represents the count of frames that are received by AP from station.
C32 hpnicfDot11StationTxFrameCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.2	Counter32	read-only	Represents the count of frames that are sent to station from AP.
C32 hpnicfDot11StationDropFrameCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.3	Counter32	read-only	Represents the count of frames that are dropped.
C64 hpnicfDot11StationRxFrameBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.4	Counter64	read-only	Represents the count of bytes that are received by AP from station.
C64 hpnicfDot11StationTxFrameBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.5	Counter64	read-only	Represents the count of bytes that are sent to station from AP.
C64 hpnicfDot11StationDropFrameBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.6	Counter64	read-only	Represents how many bytes are dropped.
C32 hpnicfDot11StationRxRetryPkts	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.7	Counter32	read-only	Represents the count of frames that are retransmitted to AP from station.
C32 hpnicfDot11StationTxRetryPkts	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.8	Counter32	read-only	Represents the count of frames that are retransmitted to station from AP.
C64 hpnicfDot11StationRxRetryBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.9	Counter64	read-only	Represents the count of bytes that are retransmitted to AP from station.
C64 hpnicfDot11StationTxRetryBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.10	Counter64	read-only	Represents the count of bytes that are retransmitted to station from AP.
C64 hpnicfDot11StationThroughput	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.11	Counter64	read-only	Represents how many payload bytes of data frame are sent and received by station.
C32 hpnicfDot11StationSuccessTxCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.12	Counter32	read-only	Represents how many frames have been successfully sent to station.
C32 hpnicfDot11StationSuccessTxDataCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.13	Counter32	read-only	Represents how many data frames have been successfully sent to station.
C32 hpnicfDot11StationRxDataFrameCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.14	Counter32	read-only	Represents how many data frames have been received from station.
C32 hpnicfDot11StationTxDataFrameCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.15	Counter32	read-only	Represents how many data frames have been sent to station.
C64 hpnicfDot11StationRxDataFrameBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.16	Counter64	read-only	Represents how many bytes of data frames have been received from station.
C64 hpnicfDot11StationTxDataFrameBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.17	Counter64	read-only	Represents how many bytes of data frames have been sent to station.
C32 hpnicfDot11StationRxFragCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.18	Counter32	read-only	Represents the number of fragmented data frames that received from station.
C64 hpnicfDot11StaRxErrDataFrameCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.19	Counter64	read-only	Represents the count of error data frames that are received by AP from station.
C64 hpnicfDot11StaTxRetryDataFrameCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.20	Counter64	read-only	Represents the count of data frames that are retransmitted to station from AP.
OCT hpnicfDot11StaTxDataRatePkts	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.21	OCTET STRING	read-only	Represents how many data frames of each rate have been received from station.
OCT hpnicfDot11StaRxDataRatePkts	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.22	OCTET STRING	read-only	Represents how many data frames of each rate have been sent to station.
OCT hpnicfDot11StaTxSignalStrengthPkts	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.23	OCTET STRING	read-only	Represents how many data frames of different signal strength have been received from station.
hpnicfDot11StationRfPingTable	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4		not-accessible	This table contains statistics of all stations in the hpnicfDot11StationRfPingTable.
hpnicfDot11StationRfPingEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1		not-accessible	This entry contains statistics for each station's RfPing results.
I32 hpnicfDot11StationRfPingIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.1	Integer32	not-accessible	Represents the rate index for the station.
OCT hpnicfDot11StationRfPingRate	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.2	OCTET STRING	read-only	Represents the rate at which the radio interface sends wireless ping frames.
I32 hpnicfDot11StationRfPingTxCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.3	Integer32	read-only	Represents the number of wireless ping frames that the radio interface sent.
I32 hpnicfDot11StationRfPingRxCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.4	Integer32	read-only	Represents the number of wireless ping frames that the radio interface received from the client.
I32 hpnicfDot11StationRfPingRssi	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.5	Integer32	read-only	Represents the client signal strength detected by the AP.
I32 hpnicfDot11StationRfPingRetries	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.6	Integer32	read-only	Represents the total number of retransmitted ping frames.
I32 hpnicfDot11StationRfPingRtt	1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.7	Integer32	read-only	Round-trip time (RTT) from the time when the radio interface send a ping packet to the time when it receives a response from the client.
hpnicfDot11StationNotifyGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2
hpnicfDot11StationTraps	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0
NTF hpnicfDot11StationMICErrorTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.1			This notification is to indicate the occurrence of a MIC failure in a certain station.
NTF hpnicfDot11StationAuthenErrorTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.2			This notification is to indicate which station happened authentication failure.
NTF hpnicfDot11StationAuthorFailTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.3			This trap is sent if a station authorization fails.
NTF hpnicfDot11StationAssocFailTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.4			This trap is sent if a station association fails.
NTF hpnicfDot11StationDeAssocTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.5			This trap is sent if a station de-association occurred.
NTF hpnicfDot11StationAuthorSuccTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.6			This trap is sent when a station is authorized successfully.
NTF hpnicfDot11StationRoamingTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.7			This trap is sent when a station roamed successfully.
NTF hpnicfDot11StationDisconnectTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.8			This notification is sent when station disconnects with AP.
NTF hpnicfDot11UserDisconnectTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.9			This notification is sent when user disconnects with AP.
hpnicfDot11StationTrapVarObjects	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1
MAC hpnicfDot11StationTrapBSSID	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.1	MacAddress	accessible-for-notify	Represents on which BSSID of AP the event happened.
MAC hpnicfDot11StationTrapStaMAC	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.2	MacAddress	accessible-for-notify	Represents the MAC address of station which happened message integrity check (MIC) errors.
DAT hpnicfDot11StationSessionStartTime	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.3	DateAndTime	accessible-for-notify	Represents the time at which the station connected.
HPN hpnicfDot11StationAssocFailCause	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.4	HpnicfDot11AssocFailType	accessible-for-notify	Represents the cause of the station association failure.
HPN hpnicfDot11StationAuthorFailCause	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.5	HpnicfDot11AuthorFailType	accessible-for-notify	Represents the cause of the station authorization failure.
OCT hpnicfDot11StationFailCauseDesc	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.6	OCTET STRING	accessible-for-notify	Represents the failure description of the station.
U32 hpnicfDot11StationSessionDuration	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.7	Unsigned32	accessible-for-notify	Represents the duration of the station sesssion.
U32 hpnicfDot11StationRoamingTime	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.8	Unsigned32	accessible-for-notify	Represents the time at which the station roamed.
IP hpnicfDot11StationACIPAddress	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.9	IpAddress	accessible-for-notify	For roam-in station, it represents the ip address of home AC. For roam-out station, it represents the ip address of foreign AC.
OCT hpnicfDot11StationAPName	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.10	OCTET STRING	accessible-for-notify	Name of the AP which the station connects to.
MAC hpnicfDot11StationBSSID	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.11	MacAddress	accessible-for-notify	BSSID which the station connects to.
OCT hpnicfDot11StaDisconnectReason	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.12	OCTET STRING	accessible-for-notify	Reason why the station disconnects with the AP.
INT hpnicfDot11StationAuthMode	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.13	INTEGER	accessible-for-notify	Represents station's authentication mode.
OCT hpnicfDot11StationACIPv6Add	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.14	OCTET STRING	accessible-for-notify	For roam-in station, it represents the IPv6 address of home AC. For roam-out station, it represents the IPv6 address of foreign AC.
OCT hpnicfDot11UserName	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.15	OCTET STRING	accessible-for-notify	Represents the user name.
MAC hpnicfDot11StationTrapAPMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.16	MacAddress	accessible-for-notify	Represents the MAC address of an AP.

RFC description

HP Procurve 802.11 wireless station MIB for WLAN client monitoring. Provides station association, authentication, throughput metrics, and disconnect traps.

Start monitoring HP/H3C Comware wireless access point (client station detail) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-DOT11-STATION-MIB