HH3C-TWAMP-MIB

All MIBs › HH3C-TWAMP-MIB

Organization: New H3C Technologies Co., Ltd.

Last Updated: 2020-09-10

Category: Technology: Network Monitoring, Technology: SLA/OAM, Vendor: H3C/HH3C

Description: HH3C MIB for Two-Way Active Measurement Protocol (TWAMP) configuration and test results on H3C devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-TWAMP-MIB?

HH3C-TWAMP-MIB implements the Two-Way Active Measurement Protocol (TWAMP-light) on H3C devices, used to actively measure round-trip network performance metrics like latency, jitter, and loss between a client and a target/reflector. It exposes configuration for enabling the TWAMP client and sender, plus a client table defining test sessions with controller ID, source/target address and port, and VPN instance binding. This MIB's monitoring role is centered on active performance-measurement test results and session configuration, letting an operator verify that a configured TWAMP test session between two endpoints is correctly targeting the intended source/destination and generating notifications on threshold events, which is a network-performance rather than hardware-health signal. TWAMP-light is a lighter variant of the IETF-standardized TWAMP protocol (RFC 5357), so this MIB depends conceptually on that standard even though it's implemented as an H3C-specific MIB. Typical deployment is on H3C routers and switches used for SLA verification across WAN or MPLS VPN links. Engineers can download the HH3C-TWAMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-TWAMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C router
H3C switch used for WAN/MPLS SLA measurement

Monitoring Examples

An operator enables hh3cTwamplightClientEnable and hh3cTwamplightSenderEnable, then inspects hh3cTwamplightClientTable/hh3cTwamplightClientEntry for hh3cTwamplightClientSrcAddr, hh3cTwamplightClientTrgtAddr, and hh3cTwamplightClientVPN to confirm a test session is correctly measuring performance to the intended target across the right VPN instance. hh3cTwamplightControllerID ties the session to its managing controller for centralized SLA reporting. If hh3cTwampNotifications fire repeatedly for a given client entry, that signals the measured path is breaching configured latency/loss thresholds.

What Can Be Monitored

TWAMP client/sender enable status
test session source/target address and port
VPN instance binding for test
controller ID association
TWAMP threshold notifications

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cTwamp	1.3.6.1.4.1.25506.2.184			The private MIB file includes the test information of the device. It is to configure the Two-Way Active Measurement Protocol.
STR hh3cTwamplightClientBindIfName	1.3.6.1.4.1.25506.2.184.2.1.3.1.23	DisplayString	read-create	Associate the TWAMP-light test with an interface.
U32 hh3cTwamplightClientCVlanID	1.3.6.1.4.1.25506.2.184.2.1.3.1.21	Unsigned32	read-create	Specify the ID of the custom VLAN to which the probe packets belong. The hh3cTwamplightClientSVlanID must be specified first before the hh3cTwamplightClientCVlanID.
STR hh3cTwamplightClientDataFill	1.3.6.1.4.1.25506.2.184.2.1.3.1.18	DisplayString	read-create	The payload fill string for each probe packet in the TWAMP-light test. If the hh3cTwamplightClientDataFillType is string, the string length is 1 to 200. When hh3cTwamplightClientDataFillType is hex, the datafill should contain any even number of characters in the range of 2 to 200.
INT hh3cTwamplightClientDataFillType	1.3.6.1.4.1.25506.2.184.2.1.3.1.19	INTEGER	read-create	Specify the type of hh3cTwamplightClientDataFill.
I32 hh3cTwamplightClientDataSize	1.3.6.1.4.1.25506.2.184.2.1.3.1.10	Integer32	read-create	Specifies the size of the data portion to be transmitted in a TWAMP operation in octets.
STR hh3cTwamplightClientDescription	1.3.6.1.4.1.25506.2.184.2.1.3.1.11	DisplayString	read-create	A comment describing this session.
MAC hh3cTwamplightClientDesMac	1.3.6.1.4.1.25506.2.184.2.1.3.1.15	MacAddress	read-create	The destination MAC address for the TWAMP-light test.
I32 hh3cTwamplightClientDscp	1.3.6.1.4.1.25506.2.184.2.1.3.1.9	Integer32	read-create	Specifies the value to store in the Differentiated Services Code Point (DSCP) in the IP packet used to encapsulate the TWAMP probe. The DSCP field is defined as the Type of Service (TOS) octet in a IPv4 header or as the Traffic Class octet in a IPv6 header. The value of this object must be a decimal integer in the range from 0 to 63. This option can be used to determine what effect an explicit DSCP field setting has on a TWAMP response.
T/F hh3cTwamplightClientEnable	1.3.6.1.4.1.25506.2.184.2.1.1	TruthValue	read-write	Control TWAMP-light control-client function. true: Enable TWAMP-light control-client function. false: Delete the TWAMP-light client and all its sessions and statistics.
hh3cTwamplightClientEntry	1.3.6.1.4.1.25506.2.184.2.1.3.1		not-accessible	Defines an entry in the hh3cTwamplightClientTable.
ROW hh3cTwamplightClientRowStatus	1.3.6.1.4.1.25506.2.184.2.1.3.1.12	RowStatus	read-create	This object allows entries to be created and deleted in the hh3cTwamplightClientTable. Deletion of an entry in this table results in deletion of all corresponding (same hh3cTwamplightControllerID index values) hh3cTwamplightSenderAdminTable and all related representations entries.
U32 hh3cTwamplightClientServiceID	1.3.6.1.4.1.25506.2.184.2.1.3.1.14	Unsigned32	read-create	An Ethernet service instance by its ID for test.
IP hh3cTwamplightClientSrcAddr	1.3.6.1.4.1.25506.2.184.2.1.3.1.3	InetAddress	read-create	Use the specified IP address (which must be given in numeric form, not as a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this option can be used to force the source address to be something other than the primary IP address of the interface the probe packet is sent on. A zero length octet string value for this object disables source address specification. The address type (InetAddressType) that relates to this object is specified by the corresponding value of hh3cTwamplightClientSrcAddrType.
IPt hh3cTwamplightClientSrcAddrType	1.3.6.1.4.1.25506.2.184.2.1.3.1.2	InetAddressType	read-create	Specifies the type of the source address, hh3cTwamplightClientSrcAddr, to be used at a remote host when performing the TWAMP-light test.
STR hh3cTwamplightClientSrcIfName	1.3.6.1.4.1.25506.2.184.2.1.3.1.13	DisplayString	read-create	The source interface for the probe packets.
MAC hh3cTwamplightClientSrcMac	1.3.6.1.4.1.25506.2.184.2.1.3.1.16	MacAddress	read-create	The source MAC address for the TWAMP-light test.
I32 hh3cTwamplightClientSrcPort	1.3.6.1.4.1.25506.2.184.2.1.3.1.6	Integer32	read-create	The source port be used by a TWAMP-light test.
U32 hh3cTwamplightClientSVlanID	1.3.6.1.4.1.25506.2.184.2.1.3.1.20	Unsigned32	read-create	Specify the ID of the VLAN to which the probe packets belong.
hh3cTwamplightClientTable	1.3.6.1.4.1.25506.2.184.2.1.3		not-accessible	Defines TWAMP-light control-client test session parameter configuration.
INT hh3cTwamplightClientTimeFormat	1.3.6.1.4.1.25506.2.184.2.1.3.1.17	INTEGER	read-create	The timestamp format for probe packets in the TWAMP-light test.
IP hh3cTwamplightClientTrgtAddr	1.3.6.1.4.1.25506.2.184.2.1.3.1.5	InetAddress	read-create	Specifies the host address to be used at a remote host for performing a TWAMP-light test. The host address type is determined by the object value of corresponding hh3cTwamplightClientTrgtAddrType.
IPt hh3cTwamplightClientTrgtAddrType	1.3.6.1.4.1.25506.2.184.2.1.3.1.4	InetAddressType	read-create	Specifies the type of host address to be used at a remote host for performing a TWAMP-light test.
I32 hh3cTwamplightClientTrgtPort	1.3.6.1.4.1.25506.2.184.2.1.3.1.7	Integer32	read-create	The destination port that be used by a TWAMP-light test.
U32 hh3cTwamplightClientVlanPriority	1.3.6.1.4.1.25506.2.184.2.1.3.1.22	Unsigned32	read-create	Specify set the 802.1p priority for the probe packets.
STR hh3cTwamplightClientVPN	1.3.6.1.4.1.25506.2.184.2.1.3.1.8	DisplayString	read-create	VPN name by which system finds route in the specified VPN to send TWAMP probe packets.
hh3cTwamplightController	1.3.6.1.4.1.25506.2.184.2.1
I32 hh3cTwamplightControllerID	1.3.6.1.4.1.25506.2.184.2.1.3.1.1	Integer32	not-accessible	The session ID of the TWAMP-light test.
DAT hh3cTwamplightLastStartTime	1.3.6.1.4.1.25506.2.184.2.1.5.1.4	DateAndTime	read-only	Date and time when the last test started.
DAT hh3cTwamplightLastStopTime	1.3.6.1.4.1.25506.2.184.2.1.5.1.5	DateAndTime	read-only	Date and time when the last test stopped.
G32 hh3cTwamplightLossSeqNumValue	1.3.6.1.4.1.25506.2.184.2.1.8.1.1	Gauge32	read-only	The largest index value in a TWAMP packet Loss test session.
hh3cTwamplightObjects	1.3.6.1.4.1.25506.2.184.2
INT hh3cTwamplightReactActionType	1.3.6.1.4.1.25506.2.184.2.1.11.1.5	INTEGER	read-create	Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap is generated
INT hh3cTwamplightReactCheckElement	1.3.6.1.4.1.25506.2.184.2.1.11.1.2	INTEGER	read-create	A list of reaction condition type.
hh3cTwamplightReactionEntry	1.3.6.1.4.1.25506.2.184.2.1.11.1		not-accessible	Defines an entry in the hh3cTwamplightReactionTable.
hh3cTwamplightReactionTable	1.3.6.1.4.1.25506.2.184.2.1.11		not-accessible	Defines TWAMP-light control-client test session reaction configuration.
U32 hh3cTwamplightReactItemIndex	1.3.6.1.4.1.25506.2.184.2.1.11.1.1	Unsigned32	not-accessible	The second index of hh3cTwamplightReactionTable, It definitely identifies one of the reaction configurations for TWAMP-light test.
U32 hh3cTwamplightReactLowerLimit	1.3.6.1.4.1.25506.2.184.2.1.11.1.4	Unsigned32	read-create	This object defines an administrative lower-threshold value for hh3cTwamplightReactCheckElement.
ROW hh3cTwamplightReactRowStatus	1.3.6.1.4.1.25506.2.184.2.1.11.1.6	RowStatus	read-create	This object allows entries to be created and deleted in the hh3cTwamplightReactionTable. Deletion of an entry in this table results in deletion of all corresponding (same hh3cTwamplightControllerID index values) hh3cTwamplightSenderAdminTable and all related representations entries.
U32 hh3cTwamplightReactUpperLimit	1.3.6.1.4.1.25506.2.184.2.1.11.1.3	Unsigned32	read-create	This object defines an administrative upper-threshold value for hh3cTwamplightReactCheckElement.
hh3cTwamplightReponsder	1.3.6.1.4.1.25506.2.184.2.2
hh3cTwamplightResetStatEntry	1.3.6.1.4.1.25506.2.184.2.1.10.1		not-accessible	Defines an entry in the hh3cTwamplightResetStatTable.
INT hh3cTwamplightResetStatistics	1.3.6.1.4.1.25506.2.184.2.1.10.1.1	INTEGER	read-create	Clear TWAMP test statistics. single: reset single. all: reset all.
hh3cTwamplightResetStatTable	1.3.6.1.4.1.25506.2.184.2.1.10		not-accessible	Defines to clear TWAMP test statistics.
U32 hh3cTwamplightRespCVlanID	1.3.6.1.4.1.25506.2.184.2.2.2.1.17	Unsigned32	read-create	Specify the ID of the custom vlan to which the probe packets belong. The hh3cTwamplightRespSVlanID must be specified first before the hh3cTwamplightRespCVlanID.
STR hh3cTwamplightRespDescription	1.3.6.1.4.1.25506.2.184.2.2.2.1.9	DisplayString	read-create	A comment describing this session.
MAC hh3cTwamplightRespDesMac	1.3.6.1.4.1.25506.2.184.2.2.2.1.13	MacAddress	read-create	The destination MAC address for the TWAMP-light test.
I32 hh3cTwamplightRespID	1.3.6.1.4.1.25506.2.184.2.2.2.1.1	Integer32	not-accessible	TWAMP test session reflector index.
T/F hh3cTwamplightResponderEnable	1.3.6.1.4.1.25506.2.184.2.2.1	TruthValue	read-write	Control TWAMP-light responder function. true: Enable TWAMP-light responder function. false: Disable TWAMP-light responder function.
hh3cTwamplightResponderEntry	1.3.6.1.4.1.25506.2.184.2.2.2.1		not-accessible	Defines an entry in the hh3cTwamplightResponderTable.
hh3cTwamplightResponderTable	1.3.6.1.4.1.25506.2.184.2.2.2		not-accessible	Defines the TWAMP-light reflector Table, and configures TWAMP test session. When the RowStatus is Active or CreatAndGo, the source address and target address, source port, target port must be configured. When the RowStatus is Destroy, Except for fields ResponderID and RowStatus, The rest can't be configured.
ROW hh3cTwamplightRespRowStatus	1.3.6.1.4.1.25506.2.184.2.2.2.1.10	RowStatus	read-create	This object allows entries to be created and deleted in the Hh3cTwamplightResponderEntry.
U32 hh3cTwamplightRespServiceID	1.3.6.1.4.1.25506.2.184.2.2.2.1.12	Unsigned32	read-create	An Ethernet service instance by its ID for test.
IP hh3cTwamplightRespSrcAddr	1.3.6.1.4.1.25506.2.184.2.2.2.1.3	InetAddress	read-create	Use the specified IP address (which must be given in numeric form, not as a hostname) as the source address for outgoing probe packets. On hosts with more than one IP address, this option can be used to force the source address to be something other than the primary IP address of the interface the probe packet is sent on. A zero length octet string value for this object disables source address specification. The address type (InetAddressType) that relates to this object is specified by the corresponding value of hh3cTwamplightClientSrcAddrType.
IPt hh3cTwamplightRespSrcAddrType	1.3.6.1.4.1.25506.2.184.2.2.2.1.2	InetAddressType	read-create	Specifies the type of the source address, hh3cTwamplightClientSrcAddr, to be used at a remote host when performing the TWAMP-light test.
STR hh3cTwamplightRespSrcIfName	1.3.6.1.4.1.25506.2.184.2.2.2.1.11	DisplayString	read-create	The source interface for the response packets.
MAC hh3cTwamplightRespSrcMac	1.3.6.1.4.1.25506.2.184.2.2.2.1.14	MacAddress	read-create	The source MAC address for the TWAMP-light response message.
I32 hh3cTwamplightRespSrcPort	1.3.6.1.4.1.25506.2.184.2.2.2.1.6	Integer32	read-create	The source port be used by a TWAMP-light test.
U32 hh3cTwamplightRespSVlanID	1.3.6.1.4.1.25506.2.184.2.2.2.1.16	Unsigned32	read-create	Specify the ID of the VLAN to which the probe packets belong.
INT hh3cTwamplightRespTimeFormat	1.3.6.1.4.1.25506.2.184.2.2.2.1.15	INTEGER	read-create	The timestamp format for probe packets in the TWAMP-light test.
IP hh3cTwamplightRespTrgtAddr	1.3.6.1.4.1.25506.2.184.2.2.2.1.5	InetAddress	read-create	Specifies the host address to be used at a remote host for performing a TWAMP-light test. The host address type is determined by the object value of corresponding hh3cTwamplightClientTrgtAddrType.
IPt hh3cTwamplightRespTrgtAddrType	1.3.6.1.4.1.25506.2.184.2.2.2.1.4	InetAddressType	read-create	Specifies the type of host address to be used at a remote host for performing a TWAMP-light test.
I32 hh3cTwamplightRespTrgtPort	1.3.6.1.4.1.25506.2.184.2.2.2.1.7	Integer32	read-create	The destination port to be used by a TWAMP-light test.
STR hh3cTwamplightRespVPN	1.3.6.1.4.1.25506.2.184.2.2.2.1.8	DisplayString	read-create	VPN name by which the system finds route in the specified VPN to send TWAMP probe packets.
T/F hh3cTwamplightSendAdminContinual	1.3.6.1.4.1.25506.2.184.2.1.4.1.1	TruthValue	read-create	Defineds to control the TWAMP test type. true: Permanent test. false: On demand test.
I32 hh3cTwamplightSendAdminDuration	1.3.6.1.4.1.25506.2.184.2.1.4.1.2	Integer32	read-create	Defines the duration the session runs for TWAMP test before being stopped.
I32 hh3cTwamplightSendAdminPktCount	1.3.6.1.4.1.25506.2.184.2.1.4.1.3	Integer32	read-create	Defines the number of packets to send for TWAMP test before the session is stopped.
ROW hh3cTwamplightSendAdminRowStatus	1.3.6.1.4.1.25506.2.184.2.1.4.1.6	RowStatus	read-create	This object allows entries to be created and deleted in the hh3cTwamplightSenderAdminTable.
I32 hh3cTwamplightSendAdminTimeOut	1.3.6.1.4.1.25506.2.184.2.1.4.1.5	Integer32	read-create	Defines the timeout time for TWAMP response packets.
INT hh3cTwamplightSendAdminTxPeriod	1.3.6.1.4.1.25506.2.184.2.1.4.1.4	INTEGER	read-create	Defines the interval at which probe packets are sent for TWAMP test.
hh3cTwamplightSendDelaySeqEntry	1.3.6.1.4.1.25506.2.184.2.1.9.1		not-accessible	Defines an entry in the hh3cTwamplightSendDelaySeqTable. The operation of this table is same as that of pingResultsTable.
hh3cTwamplightSendDelaySeqTable	1.3.6.1.4.1.25506.2.184.2.1.9		not-accessible	The largest index value in TWAMP delay results. When a TWAMP test startes, TWAMP will generates a set of statistics at regular intervals, and the index information will be incremented by one for each result.
hh3cTwamplightSenderAdminEntry	1.3.6.1.4.1.25506.2.184.2.1.4.1		not-accessible	Defines an entry in the hh3cTwamplightSenderAdminTable.
hh3cTwamplightSenderAdminTable	1.3.6.1.4.1.25506.2.184.2.1.4		not-accessible	Defines TWAMP-light control-sender's management table, starts or stops TWAMP light test function. When the RowStatus is CreatAndGo, only one among hh3cTwamplightSendAdminContinual, hh3cTwamplightSendAdminDuration, and hh3cTwamplightSendAdminPktCount must be configured.
G32 hh3cTwamplightSenderDelaySeqNum	1.3.6.1.4.1.25506.2.184.2.1.9.1.1	Gauge32	read-only	The largest index value in a TWAMP packet delay test session.
T/F hh3cTwamplightSenderEnable	1.3.6.1.4.1.25506.2.184.2.1.2	TruthValue	read-write	Control TWAMP-light control-sender function. true: Enable TWAMP-light control-sender function. false: Stop all TWAMP-light test sessions.
hh3cTwamplightSenderLossSeqEntry	1.3.6.1.4.1.25506.2.184.2.1.8.1		not-accessible	Defines an entry in the hh3cTwamplightSenderLossSeqTable.
hh3cTwamplightSenderLossSeqTable	1.3.6.1.4.1.25506.2.184.2.1.8		not-accessible	The largest index value in TWAMP Loss results. When a TWAMP test starts, TWAMP will generats a set of statistics at regular intervals, and the index information will be incremented by one for each result.
INT hh3cTwamplightSenderStatus	1.3.6.1.4.1.25506.2.184.2.1.5.1.1	INTEGER	read-only	Reflects the operational state of a TWAMP test: inactive: TWAMP test is in progress. active: TWAMP test has stopped.
hh3cTwamplightSenderStatusEntry	1.3.6.1.4.1.25506.2.184.2.1.5.1		not-accessible	Defines an entry in the hh3cTwamplightSenderStatusTable.
hh3cTwamplightSenderStatusTable	1.3.6.1.4.1.25506.2.184.2.1.5		not-accessible	Defines TWAMP-light control-sender's status table.
INT hh3cTwamplightSenderStatusType	1.3.6.1.4.1.25506.2.184.2.1.5.1.2	INTEGER	read-only	Reflects the operational start type of a TWAMP test: init: Initial status. continual: Permanent test. onDemand: On demand test.
I32 hh3cTwamplightTWDelayAvgDelay	1.3.6.1.4.1.25506.2.184.2.1.6.1.2	Integer32	read-only	The value of time that records the average two-way-delay value in the TWAMP test.
I32 hh3cTwamplightTWDelayAvgJitter	1.3.6.1.4.1.25506.2.184.2.1.6.1.5	Integer32	read-only	The value of time that records the average jitter value in the TWAMP test.
I32 hh3cTwamplightTWDelayAvgJitterDS	1.3.6.1.4.1.25506.2.184.2.1.6.1.11	Integer32	read-only	The value of time that records the average jitter value from destination to source in the TWAMP test.
I32 hh3cTwamplightTWDelayAvgJitterSD	1.3.6.1.4.1.25506.2.184.2.1.6.1.8	Integer32	read-only	The value of time that records the average jitter value from source to destination in the TWAMP test.
I32 hh3cTwamplightTWDelayMaxDelay	1.3.6.1.4.1.25506.2.184.2.1.6.1.3	Integer32	read-only	The value of time that records the maximum two-way-delay value in the TWAMP test.
I32 hh3cTwamplightTWDelayMaxJitter	1.3.6.1.4.1.25506.2.184.2.1.6.1.6	Integer32	read-only	The value of time that records the maximum jitter value in the TWAMP test.
I32 hh3cTwamplightTWDelayMaxJitterDS	1.3.6.1.4.1.25506.2.184.2.1.6.1.12	Integer32	read-only	The value of time that records the maximum jitter value from destination to source in the TWAMP test.
I32 hh3cTwamplightTWDelayMaxJitterSD	1.3.6.1.4.1.25506.2.184.2.1.6.1.9	Integer32	read-only	The value of time that records the maximum jitter value from source to destination in the TWAMP test.
I32 hh3cTwamplightTWDelayMinDelay	1.3.6.1.4.1.25506.2.184.2.1.6.1.4	Integer32	read-only	The value of time that records the minimum two-way-delay value in the TWAMP test.
I32 hh3cTwamplightTWDelayMinJitter	1.3.6.1.4.1.25506.2.184.2.1.6.1.7	Integer32	read-only	The value of time that records the minimum jitter value in the TWAMP test.
I32 hh3cTwamplightTWDelayMinJitterDS	1.3.6.1.4.1.25506.2.184.2.1.6.1.13	Integer32	read-only	The value of time that records the minimum jitter value from destination to source in the TWAMP test.
I32 hh3cTwamplightTWDelayMinJitterSD	1.3.6.1.4.1.25506.2.184.2.1.6.1.10	Integer32	read-only	The value of time that records the minimum jitter value from source to destination in the TWAMP test.
G32 hh3cTwamplightTWDelaySeq	1.3.6.1.4.1.25506.2.184.2.1.6.1.1	Gauge32	read-only	An entry in this table is created when the statistics result of a TWAMP test is determined. An implementation MUST start assigning hh3cTwamplightTWDelaySeq values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
U32 hh3cTwamplightTWErrorCount	1.3.6.1.4.1.25506.2.184.2.1.7.1.6	Unsigned32	read-only	The number of error packets received in a statistical cycle of a TWAMP-light test.
G32 hh3cTwamplightTWLossSeq	1.3.6.1.4.1.25506.2.184.2.1.7.1.1	Gauge32	read-only	An entry in this table is created when statistics result of a TWAMP test is determined. An implementation MUST start assigning hh3cTwamplightTWLossSeq values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
I32 hh3cTwamplightTWLossValue	1.3.6.1.4.1.25506.2.184.2.1.7.1.2	Integer32	read-only	The number of lost packets in a statistical cycle of a TWAMP test.
hh3cTwamplightTwoWayDelayEntry	1.3.6.1.4.1.25506.2.184.2.1.6.1		not-accessible	Defines an entry in the hh3cTwamplightTwoWayDelayTable.
hh3cTwamplightTwoWayDelayTable	1.3.6.1.4.1.25506.2.184.2.1.6		not-accessible	Defines the statistics result table for TWAMP test.
hh3cTwamplightTwoWayLossEntry	1.3.6.1.4.1.25506.2.184.2.1.7.1		not-accessible	Defines an entry in the hh3cTwamplightTwoWayLossTable.
hh3cTwamplightTwoWayLossTable	1.3.6.1.4.1.25506.2.184.2.1.7		not-accessible	Defines the TWAMP-light loss statistics result Table for providing, via SNMP.
I32 hh3cTwamplightTWSentCount	1.3.6.1.4.1.25506.2.184.2.1.7.1.3	Integer32	read-only	The number of packets were sent in a statistical cycle of a TWAMP test.
U32 hh3cTwamplightTWTotalErrorCount	1.3.6.1.4.1.25506.2.184.2.1.7.1.7	Unsigned32	read-only	The number of error packets received in last 30 statistical cycles of a TWAMP-light test.
I32 hh3cTwamplightTWTotalLossValue	1.3.6.1.4.1.25506.2.184.2.1.7.1.4	Integer32	read-only	The number of lost packets number in last 30 statistical cycle of a TWAMP test.
I32 hh3cTwamplightTWTotalSentCount	1.3.6.1.4.1.25506.2.184.2.1.7.1.5	Integer32	read-only	The number of packets sent in last 30 statistical cycle of a TWAMP test.
hh3cTwampNotifications	1.3.6.1.4.1.25506.2.184.1

RFC description

Two-Way Active Measurement Protocol configuration for network performance testing and monitoring.

Start monitoring H3C routers and switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-TWAMP-MIB

What Is HH3C-TWAMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description