HH3C-PROTOCOL-VLAN-MIB

All MIBs › HH3C-PROTOCOL-VLAN-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2004-08-31

Category: Technology: Switching/L2, Technology: VLAN, VLAN and Bridging, Vendor: H3C/HH3C

Description: HH3C MIB for protocol-based VLAN classification assigning traffic to VLANs based on Layer 2/3 protocol types.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-PROTOCOL-VLAN-MIB?

HH3C-PROTOCOL-VLAN-MIB is an H3C (Huawei-3Com/New H3C) module for configuring protocol-based VLAN classification, which assigns incoming traffic to VLANs based on Layer 2/Layer 3 protocol type rather than port or tag. It is expected to expose per-port and per-protocol-template configuration objects mapping specific EtherType/protocol combinations to target VLAN IDs. As a purely configuration-oriented MIB it has limited direct hardware/software health-monitoring value, though it can help confirm the software-level VLAN classification policy running on a switch matches the intended design. It is an H3C-specific extension used alongside standard Q-BRIDGE-MIB/VLAN objects rather than an independent IETF standard. It is deployed on H3C, and rebranded HPE/3Com-lineage, switches in enterprise networks needing legacy protocol-based VLAN segmentation. Engineers can download the HH3C-PROTOCOL-VLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-PROTOCOL-VLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C (Huawei-3Com/New H3C) switch

Monitoring Examples

No sample object names were provided for this MIB, so specific polling detail can't be given; in general, an administrator would expect to check a per-port protocol-VLAN mapping table to confirm a given protocol template, such as an IPX or AppleTalk EtherType, is correctly mapped to its target VLAN, and would investigate if traffic of a given protocol type is landing in the wrong VLAN.

What Can Be Monitored

protocol-to-VLAN mapping configuration
per-port protocol VLAN classification

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cProtocolVlan	1.3.6.1.4.1.25506.2.16			This MIB contains the objects for managing the protocol-based vlan configurations.
hh3cProtocolVlanOperate	1.3.6.1.4.1.25506.2.16.1
I32 hh3cProtocolNumAllVlan	1.3.6.1.4.1.25506.2.16.1.1	Integer32	read-only	The maximum number of protocols that can be configured on all vlans. This number may vary with products.
I32 hh3cProtocolNumPerVlan	1.3.6.1.4.1.25506.2.16.1.2	Integer32	read-only	The maximum number of protocols that can be configured per vlan. This number may vary with products.
I32 hh3cProtocolNumAllPort	1.3.6.1.4.1.25506.2.16.1.3	Integer32	read-only	The maximum number of protocols that can be applied on all ports. This number may vary with products.
I32 hh3cProtocolNumPerPort	1.3.6.1.4.1.25506.2.16.1.4	Integer32	read-only	The maximum number of protocols that can be applied to each port. This number may vary with products.
hh3cProtocolVlanTable	1.3.6.1.4.1.25506.2.16.1.5		not-accessible	Protocol-based VLAN configuration table.
hh3cProtocolVlanEntry	1.3.6.1.4.1.25506.2.16.1.5.1		not-accessible	Protocol-based VLAN configuration entry.
I32 hh3cProtocolVlanVlanId	1.3.6.1.4.1.25506.2.16.1.5.1.1	Integer32	not-accessible	Vlan ID.
I32 hh3cProtocolVlanProtocolIndex	1.3.6.1.4.1.25506.2.16.1.5.1.2	Integer32	not-accessible	The protocol index value of a row in this table in the range of [0..hh3cProtocolNumPerVlan-1]. This object may not be provided during creation. In this case, a number is assigned by system automatically.
HH3 hh3cProtocolVlanProtocolType	1.3.6.1.4.1.25506.2.16.1.5.1.3	Hh3cvProtocolVlanProtocolType	read-create	Specify protocol types supported by a protocol-based VLAN. Now protocols supported on layer 3 are ip, ipx, at, ipv6, etc. Now protocols supported on layer 2 are llc, snap, ethernetii, etc. For details, see description of hh3cProtocolVlanProtocolTypeValue.
HH3 hh3cProtocolVlanProtocolSubType	1.3.6.1.4.1.25506.2.16.1.5.1.4	Hh3cvProtocolVlanProtocolSubType	read-create	See description of hh3cProtocolVlanProtocolTypeValue.
OCT hh3cProtocolVlanProtocolTypeValue	1.3.6.1.4.1.25506.2.16.1.5.1.5	OCTET STRING	read-create	The value of the configured protocol type. By default, semicolon(;) is used as a seperator between different parts in the content of the object. The relationship among hh3cProtocolVlanProtocolType, hh3cProtocolVlanProtocolSubType and hh3cProtocolVlanProtocolTypeValue is as follows. \|--------------------------------------------------------------------------------------------\| \| hh3cProtocolVlan- \| hh3cProtocolVlan- \| hh3cProtocolVlanProtocolTypeValue \| \| ProtocolType \| ProtocolSubType \| \| \|------------------\|------------------\|------------------------------------------------------\| \| ip \| notused \| IP address with subnet mask in dotted decimal format.\| \| \| \| such as 10.10.11.12;255.255.0.0. By default,subnet \| \| \| \| mask is 255.255.255.0 . \| \|------------------\|------------------\|------------------------------------------------------\| \| ipv6 \| notused \| Zero length string \| \|------------------\|------------------\|------------------------------------------------------\| \| at \| notused \| Zero length string \| \|------------------\|------------------\|------------------------------------------------------\| \| ipx \| ethernetii \| Zero length string \| \| \| llc \| \| \| \| raw \| \| \| \| snap \| \| \|------------------\|------------------\|------------------------------------------------------\| \| mode-snap \| notused \| zero length string \| \| \|------------------\|------------------------------------------------------\| \| \| etype \| hex string like '600', which means 0x0600. \| \| \| \| The range is [0x600..0xffff] \| \|------------------\|------------------\|------------------------------------------------------\| \| mode-ethernetii \| notused \| zero length string \| \| \|------------------\|------------------------------------------------------\| \| \| etype \| hex string like '600', which means 0x0600. \| \| \| \| The range is [0x600..0xffff] \| \|------------------\|------------------\|------------------------------------------------------\| \| mode-llc \| notused \| the sequence of different parts is as follows. \| \| \| \| [dsap value][;ssap value][dsap value;ssap value] \| \| \| \| Both range is [0x00..0xff] \| \| \| \| \| \| \| \| For example. Suppose value of dsap and ssap are 0x09 \| \| \| \| and 0x0a. \| \| \| \| If neither dsap or ssap, the string length is zero. \| \| \| \| If dsap provided, the string is '09;' or '09' \| \| \| \| If ssap provided, the value is ';0a' \| \| \| \| If dsap and ssap provided, the value is '09;0a' \| \|------------------\|------------------\|------------------------------------------------------\|
ROW hh3cProtocolVlanRowStatus	1.3.6.1.4.1.25506.2.16.1.5.1.6	RowStatus	read-create	The row status of this table.
hh3cProtocolVlanPortTable	1.3.6.1.4.1.25506.2.16.1.6		not-accessible	Protocol-based VLAN port information table. hh3cProtocolVlanPortVlanId refers to hh3cProtocolVlanVlanId in hh3cProtocolVlanTable. hh3cProtocolVlanPortProtocolId refers to hh3cProtocolVlanProtocolIndex in hh3cProtocolVlanTable. So if the value of hh3cProtocolVlanPortVlanId and hh3cProtocolVlanPortProtocolId have no corresponding entry in hh3cProtocolVlanTable, set operation for this table will fail. Only hybrid ports are supported by this table. Only untagged packets are supported by this table.
hh3cProtocolVlanPortEntry	1.3.6.1.4.1.25506.2.16.1.6.1		not-accessible	Protocol-based VLAN port information entry.
I32 hh3cProtocolVlanPortIndex	1.3.6.1.4.1.25506.2.16.1.6.1.1	Integer32	not-accessible	The maximum number is the total number of the ports supported by device.
I32 hh3cProtocolVlanPortVlanId	1.3.6.1.4.1.25506.2.16.1.6.1.2	Integer32	not-accessible	The protocol-based VLAN ID.
I32 hh3cProtocolVlanPortProtocolId	1.3.6.1.4.1.25506.2.16.1.6.1.3	Integer32	not-accessible	The protocol index.
HH3 hh3cProtocolVlanPortProtocolType	1.3.6.1.4.1.25506.2.16.1.6.1.4	Hh3cvProtocolVlanProtocolType	read-only	Refer to the description of hh3cProtocolVlanProtocolType.
HH3 hh3cProtocolVlanPortProtocolSubType	1.3.6.1.4.1.25506.2.16.1.6.1.5	Hh3cvProtocolVlanProtocolSubType	read-only	Refer to the description of hh3cProtocolVlanProtocolSubType.
OCT hh3cProtocolVlanPortTypeValue	1.3.6.1.4.1.25506.2.16.1.6.1.6	OCTET STRING	read-only	Refer to the description of hh3cProtocolVlanProtocolTypeValue.
ROW hh3cProtocolVlanPortRowStatus	1.3.6.1.4.1.25506.2.16.1.6.1.7	RowStatus	read-create	The row status of this table.
I32 hh3cDifferentProtocolNumAllPort	1.3.6.1.4.1.25506.2.16.1.7	Integer32	read-only	The maximum number of different protocols that can be applied to all ports.
hh3cProtocolVlanConformance	1.3.6.1.4.1.25506.2.16.2
hh3cProtocolVlanCompliances	1.3.6.1.4.1.25506.2.16.2.1
hh3cProtocolVlanCompliance	1.3.6.1.4.1.25506.2.16.2.1.1			The compliance statement for protocol vlan MIB.
hh3cProtocolVlanGroups	1.3.6.1.4.1.25506.2.16.2.2
hh3cProtocolVlanOperateGroup	1.3.6.1.4.1.25506.2.16.2.2.1			A group of scalar objects describing the maximum number.
hh3cProtocolVlanProtocolGroup	1.3.6.1.4.1.25506.2.16.2.2.2			A group of protocol vlan protocol.
hh3cProtocolVlanPortGroup	1.3.6.1.4.1.25506.2.16.2.2.3			A group of protocol vlan port.

RFC description

Protocol-based VLAN configuration for H3C switches, managing layer 2 and layer 3 protocol assignments.

Start monitoring H3C switch (protocol-based VLAN classification) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-PROTOCOL-VLAN-MIB

What Is HH3C-PROTOCOL-VLAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description